Group of simple logic to operate before the custom import script?

Similar Questions

• Character limit to the custom calculation Script?

  Hello. I have a document that has a text form field. I want to run a custom calculation script which basically says if field 'Number group' = xxxxxxx, so the 'Group name' field should = ABC company.

  I have a list of almost 575 group numbers and names that I need to put in the script. And I have the script works fine, but I'm guessing that there is a limit of characters for the field script? It doesn't let me put my complete list in there.

  Any suggestions on how to work around this problem?

  Thank you

  Brandy

  Yes, there is a character limit for internal JS Editor. The round it is to use an external, such as Notepad.

  Do go to Edit - Preferences - JavaScript and select "Use the external JavaScript editor" and then select the application you want to use.

  Don't forget, however, that you must close the external file each time that change you it if you want to update in the PDF file.

• Tips for the custom transformation script change the Associations of FK table

  Hello
  
  I try to write a transformation script that will scroll through tables in a large model and change some
  FK associations to change the remote table at CF. By the way, the reason is that our logic model
  the logical entities that represent many areas of codes of small research. However, our relational and physical model has a
  utility single physical filing table of codes that contains all areas of these codes. Therefore, a part of the transformation
  our logic model for the relational model is to swing all FK associations for these areas of research codes
  in the table of common code. Then the paintings representing the research areas can be removed from hard.
  
  In any case, I'm looking at the
  
  oracle.dbtools.crest.model.design.relational.FKIndexAssociation
  
  or the
  
  oracle.dbtools.crest.model.design.relational.Index
  
  to see if one of them can be manipulated to perform the transformation I want to accomplish.
  
  When I perform the equivalent process manually via the property sheets there are several ways to address this problem.
  
  (a) the method more jolise seems to change the FK in place by clicking on the FK in the relational schema and changing
  the property called ' PK / UK Index'. Change that to the pharmacokinetics of utility code repository table that replaces the original
  table (which represents the research field). A side effect of this translates into CF mapping
  columns being nulled out. They must be remapped to original columns (which are kept).
  So in two stages, the existing FK is detached from the original, attached table to the new table, and then
  FK columns are reused in place for new CF mapping.
  
  (b) the brute force method is to remove the original FK and then create a completely new FK to the new table. There are
  several dialog boxes that allow you to keep the original FK columns and use them in the new FK.
  
  I realize, this is a somewhat complex transformation, but I would like a few algorithmic advice on which path to take
  to try to achieve. In particular, there is a script that is equivalent to that of the first process above?
  
  I don't even know if the CF which is represented on the relational schema is represented by the FKIndexAssociation or Index
  class in the script object model. In other words, I have to loop through the tables in the relational model what would be my
  starting point:
  
  FKS = table.getFKAssociationsList ();
  
  or
  
  fkIndexes = table.getAllInds_FKeyInds ();
  
  or something else. The names of the properties in the user interface are always with the properties of scripts not so
  It's a little difficult to understand such things.
  
  Once I have access to the object that is equivalent to the FK in the property/diagram worksheet, which
  is the best way to handle via script. How can I change the end of parent and away from CF to point to the new table.
  Or if I have to delete the original CF and then re-create - is there a way to save the original FK columns and reuse them
  While creating the new FK?
  
  ********************
  
  Another question. What is the best way to remove tables from a relational model. I note that there is a remove() undocumented (?)
  a method that is available on the Table. It's probably a superclass to remove other things as well.
  
  When I try to use this method in a loop the script throws up to dialog boxes that are similar to dialog boxes that are displayed during the execution of a removal
  manually through the user interface. Is it possible to intercept and answer dialogs programmatically?
  So for example if I get a window of dialogue as
  
  You want to remove generated columns of FK 'FOO' in the table 'BAR '?
  
  is it possible to intercept this dialog in the script and then answer Yes or no it via the script?
  
  ***************
  
  If it is too difficult to perform this type of transformation with the help of script
  is to do the transformation on the generated DDL file. But it would be cleaner to
  to do the transformation in the relational model DM if possible.
  
  All advice appreciated.
  
  Rgds, BP

  When I try to use this method in a loop the script throws up to dialog boxes that are similar to dialog boxes that are displayed during the execution of a removal
  manually through the user interface. Is it possible to intercept and answer dialogs programmatically?
  So for example if I get a window of dialogue as

  You want to remove generated columns of FK 'FOO' in the table 'BAR '?

  is it possible to intercept this dialog in the script and then answer Yes or no it via the script?

  It's in the preferences - "Data Modeler > model > relational > remove FK column strategy."

  I don't even know if the CF which is represented on the relational schema is represented by the FKIndexAssociation or Index

  Is a pair of two - FKIndexAssociation, that's what you see the pattern, but it is hidden in the table index - isFK() returns true for this type of index and you can take FK with getFKAssociation()

  Once access to the object that is equivalent to the CF in the property/diagram worksheet

  table.getFKAssociations () - returns an array of the foreign keys;
  You can get to them from the relational model:
  model.getFKIndexAssociationSet () .toArray () - FK all model

  How can I change the end of parent and away from CF to point to the new table.
  Or if I have to delete the original CF and then re-create - is there a way to save the original FK columns and reuse them
  While creating the new FK?

  There should be no problem if you use the same number of columns with the same data type and order:

  get the current FK columns
  columns = fk.getColumns ();
  newRefKey is the new key question; referred and child columns must match the data type and the order in the keys - you do not ask how to get
  fk.changeKeyObject (newRefKey, columns);

  function setting in preferences, you will get the question on the columns of FK.

  Therefore, a part of the transformation
  our logic model for the relational model is to swing all FK associations for these areas of research codes
  in the table of common code. Then the paintings representing the research areas can be removed from hard.

  You can create the hierarchy of entities with the root attribute (and PK identifier) KP holding entity and entity - your look-up - empty child relationships will be these entities of the child. With the help of the transformation of the "unique Table" you will get what you are trying to achieve now with script.

  Philippe

• Is it possible to use formulas (for example 'if' or VLOOKUP functions) in the "custom calculation Script?

  I'm working on a PDF form fill converted from MS excel. It is for others to use who do not have MS excel required to use my spreadsheet.

  1. I would like to know, how can we have complex formulas being the custom tab calculation script calculate under properties in a menu of cell?

  2. where can I find it that the formulas will work in the calculation script custom as well as the format of these formulas work properly (tutorials would help)?

  I tried to write an 'if' function but I get and error so I guess that is functions do not work in the script, or there is a different format of spreadsheet standard formats.

  Bruce

  .

  In this case the loop would be:

  for (var i = 0; i)< 8;="" i="" +="1)">

  sum += + getField("Total."_+_i).value;

  }

  So initially, the counter i is zero, so the domain name used with the getField method is:

  'Total': + 0, which results in the string "Total.0". At each iteration, the variable i is incremented by 1, so the following field names are the following:

  "Total.1".

  "Total.2".

  'Total.3 '.

  'Total.4 '.

  'Total.5 '.

  'Total.6 '.

  "World.7.

  The script gets the value of each field, it converts numbers and adds the number to the cumulation.

• Can not enter the custom calculation script

  Hello

  I can't get into script custom logic in a text form field in Acrobat XI.  When I paste my code and click on 'OK', the script is not reflected in the tab "calculate."  That the choice of "value is not calculated" is selected.  I get no error message.

  Delete the field and create it again.

• Import the custom calculation Script

  I have a purchase order General Im is about to build. I have a lot of subtotal fields needing a custom on them calculation script.

  Is it possible to load a script (XML / import data) in all my fields desired with the appropriate script?

  Or is there little javascript that allows to calculate per line?

  Sample:

  https://DL.dropboxusercontent.com/u/2944617/sample.PDF

  CAL script:

  Event.Value = (this.getField("__PRICE-01__").value * this.getField("__QTY-01__").value);

  If (+ event.value = 0) event.value = "";

  You can use a script to set calculation script custom field, like this:

  this.getField("FieldName").setAction ("calculate", "code as string");

• Convert the IF function in the custom calculation Script

  Can someone help me with 'IF(Line7<Line8) Line7, framework8' conversion in a custom calculation Script?

  var L7 = Number(this.getField("Line7").value);
  var L8 = Number(this.getField("Line8").value);
  event.value = (L7		   

• Time-out occurred before the event waited for SequenceRunner simple

  I'm unable to these tests. I always get Timeout occurred for my sequence in the testOnLogout test.

  Any ideas?

  Time-out occurred before eventTimeout expected occurred before the EXPECTED event
  Error: Timeout occurred before the EXPECTED event
  at org.flexunit.internals.runners.statements::ExpectAsync/handleAsyncTimeOut() [E:\hudson\job s\FlexUnit4-Flex4.1\workspace\FlexUnit4\src\org\flexunit\internals\runners\statements\Expe ctAsync.as:319]
  at flash.events::EventDispatcher/dispatchEventFunction()
  at flash.events::EventDispatcher/dispatchEvent()
  at org.flexunit.async::AsyncHandler/handleTimeout() [E:\hudson\jobs\FlexUnit4-Flex4.1\workspa ce\FlexUnit4\src\org\flexunit\async\AsyncHandler.as:169]
  at flash.events::EventDispatcher/dispatchEventFunction()
  at flash.events::EventDispatcher/dispatchEvent()

  package tests.view
  {
  
  Import flexunit.framework.Assert;
  
  Import mx.events.FlexEvent;

  
  Import org.flexunit.async.Async;
  Import org.fluint.sequence.SequenceRunner;
  Import org.fluint.sequence.SequenceSetter;
  Import org.fluint.sequence.SequenceWaiter;
  Import org.fluint.uiImpersonation.UIImpersonator;
  
  view of the import. LoginForm;
  
  public class TestLoginForm
  {
  
  private var view: LoginForm;

  [Before (async, ui)]
  public void setUp(): void
  {
  view = new LoginForm;
  Async.proceedOnEvent (this, opinion, FlexEvent.CREATION_COMPLETE, 600);
  UIImpersonator.addChild (view);
  }
  
  [After (async, ui)]
  public function teardown (): void
  {
  UIImpersonator.removeChild (view);
  view = null;
  }

  
  [Test (async, ui)]
  public function testOnLogout (): void {}
  var passThroughData:Object = new Object();
  
  passThroughData.username = "test";
  passThroughData.password = "test";
  passThroughData.selectedIndex = 0;

  var sequence: SequenceRunner = new SequenceRunner (this);
  sequence.addStep (new SequenceSetter (view.username, {text:passThroughData.username}));}))
  sequence.addStep (new SequenceWaiter (view.username, FlexEvent.VALUE_COMMIT, 400));
  
  sequence.addStep (new SequenceSetter (view.password, {text:passThroughData.password}));}))
  sequence.addStep (new SequenceWaiter (view.password, FlexEvent.VALUE_COMMIT, 400));
  sequence.addStep (new SequenceSetter (view.domain, {selectedIndex:passThroughData.selectedIndex}));}))
  sequence.addStep (new SequenceWaiter (view.domain, FlexEvent.VALUE_COMMIT, 400));
  
  view.onLogout ();
  
  sequence.addStep (new SequenceWaiter (view.username, FlexEvent.VALUE_COMMIT, 400));
  sequence.addStep (new SequenceWaiter (view.password, FlexEvent.VALUE_COMMIT, 400));
  sequence.addStep (new SequenceWaiter (view.domain, FlexEvent.VALUE_COMMIT, 400));
  
  sequence.addAssertHandler (handleOnLogout, passThroughData);
  
  Sequence.Run ();
  }

  
  protected function handleOnLogout (passThroughData:Object): void {}
  Assert.assertEquals)
  View.UserName.Text, passThroughData.UserName,
  View.Password.Text, passThroughData.Password,
  (view.domain.selectedIndex, passThroughData.selectedIndex);
  }
  
  }
  }

  So I take a guess here that you want is the call of onLogout() occur as part of the sequence. But it's not what your code. Sequences are defined, then run when you call the run() method.

  Here you call the method onLogout in the middle of set the sequence... then some time later (probably after the disconnection is made) your sequence starts waiting for things happen... and to expire because nothing happens.

  I think that what you want here is to use the SequenceCaller class to actually perform the onLogout as part of the sequence.

  Mike

• Groups of logic: how * not * to the source map, but only accounts of logic resulting?

  I have a source account we'll call A100. This account must be 'cut', such as parts go to new logic represents, based on the mapping of arithmetic and then be mapped to various accounts targets.
  
  Once completed, the entire amount of A100 will have been posted, so if I have A100 map as well, I'm doubling the value will the target accounts.
  
  So, is it possible not to map a source account?
  
  Thank you

  Hello

  Unfortunately the mapping is a requirement of FDM. What you can do is to match the article on "ignore."
  Any line that contains the word "Ignore" will ultimately not be written in the. DAT file during export.

  I hope this helps...

• Dry well EMC CX4 - 120 disks before the gift

  We have an installed SC8000 Compellent, and I would like to find a way to erase (wipe of multipass DOD) data from the drives before you make a donation or surplussing safely our old CX4-120.

  I came across this old thread, but it's a little bit conclusive and unresolved:

  Anyone else have ideas on how to do better to achieve this? Also, I can't imagine there would be any sensitive data that would be on the OS on the first five drives SAN, right?

  Thank you for all the ideas, people.

  The easiest way is to implement raid groups 1 or more with readers supporting a raid 0 on electromagnetic compatibility (16 my head) or a maximum number. Then create a LUN, set up 1 server with a connection to the CX4-120, put the server and the logical unit number in the same storage group and use some server software to wipe the drives.

  The reason for raid 0 is 2 times; I guess that you are not using raid 0 in production, so readers will be cleaned by the RAID 0 array, but it also gives you the fastest writing time while you let the software do the washing.

• I improved my 5s IOS10 3 days and battery discharge excelerated standby, as well as when you use. I turned off notifications, as, other non when not in service. Which could operate in the background?

  I improved my 5s IOS10 3 days and battery discharge excelerated standby, as well as when you use. I turned off notifications, as, other non when not in service. Which could operate in the background?

  Hi mweedn!

  I understand that you see a reduction in the battery of your iPhone 5s after updating to iOS 10. It is important to be able to make full use of your iPhone! There are a few resources that can help.

  Before the resolution of the problem, were you able to view information using your battery on your iPhone? Here's how to check the amount of battery used by each application:

  On the use of the battery on your iPhone, iPad and iPod touch

  When you answer, remember to let us know if you see all the apps with an abnormal amount of battery. See you soon!

• After the upgrade to OS 10.11.2, Mac Mini is so slow that it can take an hour to operate and the printer will not scan.

  After the upgrade to OS 10.11.2, Mac Mini is so slow that it can take an hour to operate and the printer will not scan.

  When you see a beachball cursor or the slowness is particularly bad, note the exact time: hour, minute, second.

  These must be run as administrator. If you have only one user account, you are the administrator.

  Run the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Each message in the journal begins with the date and time when it was entered. Highlight date back to the time you noted above.

  Select the messages entered since then until the end of the episode, or until they begin to repeat, whichever comes first.

  Copy messages to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost all this is useless to solve any particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name, may appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• Low-pass filter before the NI 5112

  Hello

  I currently use a 5112 AND measure the signal of an infrared detector in an experience of ring to the bottom of the cavity. Below are three examples of signals. My main question is how I can implement a low pass filter, passive preference, before my 5112 OR undistorted extremely my signal due to the impedance mismatch. Now a few details:

  

  

  

  Some unique captures for each wavelength are shown in color, while average 25 pulses appears offset in black. The range and offset are chosen in each case in order to minimize the noise of "scanning". In the case of 3.14um, the noise that you see is about 25 times noise from scanning. They were taken without the limitation of BW and 100 ms/s mode.

  The detector (Vigo MIPDC-F-10) has a bandwidth of 10 MHz. I think it is a low impedance and is intended to be harnessed with 50Ohms, however its documentation confuses me, and I'm waiting for a definitive answer from the provider. 2.4 part of the manual says 50Ohms recommended, however the Datasheet and our map calibration (below) seem to suggest 1 MOhm is recommended!

  

  There are a few strange oscillations with a period of almost 180ns in our signal that I thought were due to the impedance mismatch existed in the system before I changed it:

  -Detector

  -1 metre 50 Ohm SMC Cable BNC (RG-174)

  -Inline BNC connector

  -meter 5, 75 Ohm BNC to BNC cable

  -Digitizer, DC, no BW limit, 100 ms/s, 1MOhm | 30pF

  When I saw this configuration, I knew something wasn't right and I even he modeled in LTSpice and he showed the same period of oscillations. But now, the Setup is:

  -Detector

  -1 metre 50 Ohm SMC Cable BNC (RG-174)

  -BW digitizer, DC, limit, 100 ms/s, 50 Ohm

  And we still have oscillations, even if the period seems to have changed to 320ns all about. These oscillations, which remain are 99%, probably due to our drop-down ring cavity experiment, however if anyone has recommendations on possible causes or ways I can confirm it is not because of my chain of detection they would be more than welcome!

  Now, the main question. Between the 50 Ohm 1 meter cable and the scanner I would insert a low pass filter. The BW limit has helped reduce the noise, but it can certainly still be further reduced without any lose to our signal. That's because we cut the beginning of the signal and then measure just the the decay time, which is relatively long and smooth (1 to 2 times 1/e US). Thus, in the future I may even want to try to eliminate the oscillations 320ns, but I'm afraid that this much filtering will distort the signal too. Therefore, for the immediate future I'm just looking to 'replace' the filter BW 20 MHz, with something like 1 or 5 MHz.

  Of course, I would disable the BW limit on the digitizer to avoid additional confusion, but nevertheless, I'm not sure how to approach the problem. Usually I do a lot of research and try different solutions. However, I don't have access to all components to this work, so everything should be ordered, and I don't have a lot of time to experiment. Ferrites seem like a possible solution, however not sure how effective they are at this low frequency or the way they work with coaxial cables. I know that the filter passes low RC base, but the 50Ohms (or 1MOhm | 30 pF if I change it) seem to make it impossible. I guess an op-amp based one might work, however the large input impedance is the impedance of coaxial cable... etc...

  All of the recommendations of the technique or red resources wort would be welcome. Thanks for your time.

  A possible way to separate your artifacts electric and the cavity is relatively simple.  You take the data at three wavelengths.  For each of them, make a simple exponential decay (for example exponential Fit.vi) adjustment to your data, then subtract this signal.  You should have something that oscillates on an average.  Compare the residual signals for all three wavelengths, either visually or with something like a power spectrum.  Anything in the three is probably the electronic (and you could possibly model and subtract it rather than trying to eliminate it).  This could break if the rise time of the signals are different, because that will include elements of different frequency.

  I am not convinced that you need to filter your signal before taking data.  As you said, any filter will distort your final signal.  My preference would be to take the raw signal and apply a filtering in the analysis.  LabVIEW has a rich filter, so you can experiment later.  If you apply a filter before the digitization of data, you take you will never receive data.  However, if you know that your data has no component of your proposed cut filter frequency, you should be good.  An analysis of the power on your current spectrum should tell you this.  Be careful.  Your form of rise time may have information you want later.  If you filter, you will probably slow it down.

  Good luck!  Let us know if you need more information.

• Should what key I use on my existing direct KMS host server for Windows 10 activations before the release of the 2016 Server?

  Issue of the company.

  At first glance, this should have a simple answer. Of course the Windows 2010 KMS key for my good company?

  Only I think Yes, because using a Windows client (which is Windows 10) KMS key on the KMS host allows only version and low-level Windows client KMS Activation for Vista and Windows 7/8/8.1 - no server product. Certainly in the past, this has been the case.

  In the past, this was not a problem because the server and the client product were released at the same time and you would just install the KMS key last Windows Server product on the KMS host computer. Once installed, it would activate the time server and client OSs contacted the KMS host. For example my server currently has an installed server 2012-R2_VOLUME_KMS key, which activates the right client and server versions of Windows 2008\Vista.

  So my question is, what key to KMS server do I use on the KMS server, to enable 10 activations and activation 2008r2\2012r2 Windows Server Windows in 6-9 months before Ms. free and publishes a key KMS Windows Server 2016?

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.msdn.Microsoft.com/Forum
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil

• You must stop your request before the engine may stop

  I have an integrated application that uses LV DSC 6.0.2. The application starts and stops the engine tag programmatically. The application works fine, but on some machines, I'll get continuously the next dialog box when I try to stop the engine of the tag:

  "You must stop your request before the engine may stop"

  It's strange, because it only happens on some machines (it seems that it can occur on computers with ONLY of DSC Run-Time installed, not the full dev system. DSC LV).

  The dialog seems to refer to the application of 'control' which tries to stop the engine... it isn't telling me that my devices servers need to be stopped.

  This dialog box does not seem logical, I should be able
  to build an application that can start and stop the engine... and why I get this dialog on some machines but not on others?

  John Paul,

  There are two points that we should ask ourselves:
  1: you can have different loops while in your application where you read/write to and from the engine of the tag with the read/write Tag.vi. These screws has a stop of production which must be wired first the while loop. If you have cases where you do not connect this output to your time stop loop you could access the engine while you want to stop the engine in another loop with the Shutdown.vi engine. -> Make sure you have all drivers of DSC to access loops has stopped before you turn off the engine.

  2nd: I guess he was once an issue of race with the DSC engine condition and how it access to shared memory with the read/write Tag.vi. But this condtion of race must be agreed with the version of LabVIEW DSC
  6.1 or with other fixes for LabVIEW DSC 6.0.2. You can download patches (in this case, particularly the BVRTDatabase.dll) driver update page & of NOR: www.ni.com/support/ > Option 3, drivers and updates > Search drivers and updates > type 'LabVIEW DSC' > choose LabVIEW Datalogging and Supervisory Control 6.0.2 fixes.
  You must apply the patches of this as well on your DSC 6.0.2 Run Time System!

  I hope that one of the help of two suggestions to solve your problem.

  Concerning
  Roland

  FTP://FTP.NI.com/support/LabVIEW/labviewdsc/fixes/6.0.2/