Custom - not displaying forms not the system message "" Transaction end: 1 sheet applied and saved "»

Similar Questions

• How to avoid the FRM-40400: complete Transactin: 1 sheet applied and saved

  Hello
  I have a form master detail.
  I'm not changing the main block, so I put it as non-editable.
  There is a push button. When I update or insert a new value into the details (tabular) block (: detail_block.text_item), I click on the button to make the change permanent in the database.
  At the beginning I had used standard.commit in the button, but that has not worked. By doing this, when I exist shape he even once asked me if I should commit (* do you want to save the changes you made? *).
  I then used commit in the push button. It is committed in the database but still promts me FRM-40400: complete Transactin: 1 sheet applied and saved. That I don't want.
  Could you please help me?
  
  concerning

  QGIRCO wrote:
  Hello

  try using the following code after validation;

  CLEAR_MESSAGE();
  

  I hope this will help u.

  Sarah

  Integrated Clear_Message will also work. But this is a problem with this integrated procedure. Suppose that you have used your code like this...

  COMMIT;
  CLEAR_MESSAGE;
  

  If for any reason any form triggers the error as FRM-40508: ORACLE error: unable to INSERT record. then the code above does not display this message in the status bar and user will think that the data is saved. But in the real world, there is error.

  And now, if you use the code as I said above she will hide this message * 1 sheet applied and saved etc... * and if there is an error in the form, then it will show in the status bar.
  ;)

  Hope that's clear.
  -Clément

• Friend upgrade XP to windows 7. not authentic Windows message receipt. Buy Windows 7 and downloaded to "fix the problem".

  Friend upgrade XP to windows 7. not authentic Windows message receipt.  Buy Windows 7 and downloaded to "fix the problem". Computer crashed, but I got a new drive. Should I try install

  Hello

  So the Windows 7 machine is fine, but its also empty! That we can help you. The XP machine is another matter. If you want to upgrade these machines to Windows 7, and the minimum hardware requirement is met, you can buy discs of software of Windows 7 operating system for each machine (1 motherboard = 1 license for purchased software).

  In addition, I highly recommend you reformat two machines for them to XP RID completely, not to mention viruses / malware. If you plan to update the two XP machines with own versions of XP, that's fine, but this isn't the forum for this, the Windows XP forum would be the place, go here: http://answers.microsoft.com/en-us/windows/forum/windows_xp?tab=QnA .

  Thus, the machine to Windows 7. To take no chances. Allows to run several scans on the new machine. You said "didn't work any more", I suppose you can't start Windows, ways to correct? If so, the answer is a program you burn on a CD called BootMed; Download 64-bit here: http://download.cnet.com/BootMed-64Bit/3000-2094_4-75450831.html and the 32-bit version from here: http://download.cnet.com/BootMed/3000-2094_4-75448200.html (only use the Direct download link).

  Once downloaded, burn it to a CD, load this CD in Windows 7 computer and ensure that the CD drive is the first boot device, restart the computer. This will load a modified version of Ubuntu on your system, which includes antivirus and anti-malware programs. Run and remove anything they find. When they have finished their trial scans restarting the computer without the CD installed. What happens now?

  Post your results here and let me know how you fare.

  Kind regards

  BearPup

• When the backup space is low, is not the system that is supposed to replace the previous backups?

  When the backup space is low, is not the system that is supposed to replace the previous backups?

  Hello

  Actually, it depends on the backup that has been already set parameters.

  You will find all your answers in the article.

  Should what backup settings I use to maximize my disk space?

• KB2756918 fix does not update. system keeps asking you to do again and again even if she says she successfully completed

  system asks continually updated. but when I update and the system says it successfully completes. It all comes down to sy, I got an update which is the same as that over and over again. How can I stop it?

  Hello

  Thank you for writing to Microsoft Communities.

  According to the description of the problem, it seems that windows update constantly updated of the same update that is already installed.

  Please go ahead and follow the steps mentioned and later a update on the State of the question.

  Method 1: Try to reset components to update Windows from the following link:

  http://support.Microsoft.com/kb/971058

   

  Method 2: Also scan your computer from the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.microsoft.com/security/scanner/en-us/default.aspx.

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

   

  For your reference:

  Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update

  http://support.Microsoft.com/kb/910339

  (For Windows Vista)

  Please follow these recommended steps and post if you still experience the problem.

• I recently updated the Canon mark II to the mark iii, and the images taken of the mark iii will not make previews in bridge. Bridge will show previews for the images taken with the mark ii, but not the mark iii. I have adobe cc and use

  recently updated the Canon mark II, mark iii, and the images taken of the mark iii will not make previews in bridge. Bridge will show previews for the images taken with the mark ii, but not the mark iii. I have adobe cc and am using camera raw 9.2. I checked the updates and it is said that there is not. I also tried to purge the cache several times and that didn't work either. Any help with this would be so appreciated its driving me crazy!

  Take a look at this: generic icons | Files camera raw | Adobe Bridge

• I'm on PC Win 7 and bought, downloaded and installed Lightroom 6 the day it was released. When he downloaded and installed it seems to be the version CC, not the LR6. I entered my license number and it works on my computer, but it has Adobe CC

  I'm on PC Win 7 and bought, downloaded and installed Lightroom 6 the day it was released. When he downloaded and installed it seems to be the version CC, not the LR6. I entered my license number and it works on my computer, but there CC Adobe on my desk and I don't want that on my computer. How can I remove the Adobe CC from my computer and still have 6 installed Lightroom and working?

  If you are unable to remove Adobe Creative cloud Control Panel, see link below:

  https://forums.Adobe.com/thread/1846925

• I got the error message "Spooler subsystem app stopped working and was closed".

  I got the error message "Spooler subsystem app stopped working and was closed" when I tried to print a large PDF file.  I can not load a printer now.  What is the next step?

  Hello

  You should probably check with Support from Adobe and their communities and Forums in case
  There are known problems.

  Adobe - Support
  http://www.Adobe.com/support/

  Adobe - communities
  http://www.Adobe.com/communities/

  Adobe - Forums
  http://forums.Adobe.com/index.jspa

  ====================================

  Check with the printer manufacturer for updated drivers and support for known issues.

  Check chan seen message here - one of the highest.

  fixed spooler subsystem app stopped working
  http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e

  ===================================

  If the above didn't help:

  Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
  the latest driver).

  Check Mr. Fixits here and if you use the other methods go back and try again later.

  Problems of print and error - a Mr Fixit of printing
  http://support.Microsoft.com/GP/printing_problems

  Solve printer problems - a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx

  ------------------------------------------------------
  Logon as administrator

  Start - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN

  You can copy and paste each line except those brackets and press ENTER after each.

  net stop Spooler

  (echo suppression of all print jobs)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  del/q %SystemRoot%\system32\spool\printers\*.*

  net start Spooler

  (sound Done!)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  Another way
  http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/

  Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
  http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspx

  If you use Control Panel - Classic - printers

  Try after unplugging your printer if necessary.
  -------------------------------------------------------------

  Also check the spooler print and its dependencies and addictions Service.

  The value of all Services back to their default values.

  Start - type into the search box-> Services find top - make a right click on - RUN
  AS AN ADMINISTRATOR

  BlackViper - for Vista SP1 - Services - all return to their default values.
  http://www.blackviper.com/2008/01/28/black-vipers-Windows-Vista-Service-Pack-1-service-configurations/#more-3020

  BlackViper - for Vista SP2 - Services - all return to their default values.
  http://www.blackviper.com/2009/05/31/black-vipers-Windows-Vista-Service-Pack-2-service-configurations/#more-2991

  How difficulty Windows Vista print spooler starts do not
  http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html

  ------------------------------------------------------------

  Check this thread if necessary - to stop and erase the spooler

  http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/a15779d6-ac0d-42FD-9Ac2-a1da241ea19f/

  and here
  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/58b54fa9-cf6f-40F7-90b2-8093c6777493

  ------------------------------------------------------
  Clean the General corruption and repair or replace the damaged/missing files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  CheckDisk (chkdsk) runs at startup.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Ideas: I get the 0x80073AFC error code when I try to use the system restore then, how can I find and replace this file missing MUI?

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: I get the 0x80073AFC error code when I try to use the system restore then, how can I find and replace this file missing MUI?

  • I am running Windows 7 for packs SP 1 or SP 2 does NOT solve my problem since neither one works with Windows 7.  Is there a way to search for this MUI (Multiple User Interface) missing file? The every thing must have himself installed in the first place. I took my mom (she died in June) and my brother on this PC as users so even if they do not use this PC supports multiple users. Maybe if I deleted as a reboot and additional users it will solve my problems. My updates install OK but I can't run at all system restore. It creates a restoration point OK but when I try to sr back to a restore point before I get the error 0x80073AFC topic of the missing MUI file. Then, when I spear SR it is said that he could not and no files have been changed because of the error 0x8000FFFF error, unspecified catastrophic failure and could not retrieve the file several times when system restore is attempted.

    I'm running Windows 7 on a HP Pavilion with browser Firefox 3.6.8 browser Opera 10.60, IE8 and Google Chrome 5.0.375.125 browser browser.

    Can you tell me what I try next? Thnks a lot and sayonara for now the guy-Jack McElwee / keimanzero the Scion of the Anime in Brookhaven PA - USA

    OK I tried everything and nothing works! Only added beginners are updated browser Opera 10.63; IE9 (Beta); Firefox 3.6.12 and Google Chrome 7.0.517.41 and Java 22. Of course like everyone else in the world, I had to uninstall/enable and disable/download again and reinstall new Adobe Flash 10 and 11 of the shock wave and they keep crashing too! Hello 4 keep screwing browsers and now I get connection network problems. I run Comcast doctor and did everything it said to do, but nothing works. Oh and I added 7-Zip and WinZip also. Likewise, they will not work! Help! Thanks - K & K

  keimanzero,

  Comcast of Norton Security Suite version is installed? If Yes, who and perhaps malware is most likely to cause questions you have published, in particular the failure of the restoration of the system.
  First, configure the system to boot - How to solve a problem by performing a boot in Windows Vista or in Windows 7
  NOTE: Start-up mode minimum state all the 3rd party firewalls will be disabled. Open Control Panel > Windows Firewall to make sure that the native firewall of Windows 7 is now on.

  Download and Save the update system (or CheckSUR) tool. You will need to download the specific Version of CheckSUR corresponding to the architecture of the system to Windows 7. If you do not know the architecture of the system, and then click the link that says "Click here to show or hide the instructions step by step with images" under method 2: download the update directly system preparation tool from Microsoft Download Center .
  Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

  Once the download is complete, close all open programs and browsers. Now, run CheckSUR with the system connected to the internet because it will download the .cab for system files. Reboot once CheckSUR is complete.

  Secondly, I suggest that you run the File Checker system while in the same clean boot state.
  To run the System File Checker tool, follow these steps:

  1. Click Start and type cmd in the field search programs and files .
  2. Right click on cmd.exe in the programs of list, and then choose 'run as administrator '.
     If you are prompted for an administrator password or a confirmation, type your password or click on continue.
  3. At the command prompt, enter the following line exactly as written including the space between thec and the/and then press ENTER:
     sfc/scannow

  When the analysis is complete, test to see if the problems facing the system have been resolved.

  If they are not, you will need to contact Norton support for the version of Norton Internet Security Comcast to get help, or just uninstall NIS, run the Norton removal tool (right click Norton_Removal_Tool.exe, choose "Run as Administrator"), reboot and then check to see if the problems are still occurring.

  Expert MowGreen Windows IT Pro - consumer safety

• When I try to map a folder or printer on the netbook, the system wants a user name or password, and I don't know what to say.

  Password for the drive mapping

  Password for the card

  1. I have XP Pro SP3 on a computer desktop and XP Home SP3 on a netbook. A printer is on the desktop.
  2. I have a local area network using Ethernet between the two computers. According to the 'network connections' opens on both computers, the LAN connects successfully.
  3. I've specified three office folders (and their subfolders) and the shared printer, all this without passwords (I don't use password at all in both systems).
  4. in the past, I could map files and printer on the netbook without difficulty, but now when I try to map a folder or printer on the netbook, the system wants a user name or password, and I don't know what to say.
  5. what has changed, and how can I revert the changes?
  Adrian

  Hi Adrien,.

  I suggest that you disconnect the card reader and see if it helps. See the following article for more information.

  How to connect and disconnect a network drive in Windows XP

• How can I only restore contacts and calendar but not the system after factory reset settings?

  Hello

  I have an iPhone 5.  I forgot the password of restrictions long ago and no backups prior to that date.  I want to do a factory reset.  How can I do this while keeping a copy of my contacts, notebooks, lists and schedules, so I can re - sync after the reset?  I don't want to re - sync system settings that my backup plays up and want to do a clean install of the main parameters.

  All advice appreciated.

  Chris

  You need to store your contacts and calendars on your computer or Cloud Computing service.

  AR you not do?

• Notification area: icons are invisible (NOT the system icons)

  Was fine when I went to bed last night. Computer did an automatic stop (no windows update). Started this morning and the notification area icons are invisible. The space of each icon is still there because I can mouseover a vacuum arises space and text for each icon.

  I tried the regedit fix, but that is really intended for people who cannot see their system icons. The icons of my clock, volume, network and battery are still visible, but no other icons are. Restarted several times, started in safe mode and windows theme switched from classic to vista. I can't find an answer to this problem.

  When I restart windows, first 2 or 3 icons will begin to show, but then after that, for some reason, they disappear and no other icons appear. As I said, however, the actual processes are still running and I can even access. Just the icons are not visible.

  Try a system restore to a Date before the problem began:

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  See you soon.

  Mick Murphy - Microsoft partner

• Error in Event Viewer: loading libraries of dynamic links customized for each application. The system administrator should review the list of libraries

  My system features, i7 thinkpad w540, 16 GB of ram and a 256 GB ssd. Using MSE as av with AMBM pro

  whenever I start my system, win 7 x 64, I get the following error in the event viewer:

  Custom dynamic link libraries are loaded for each application. The system administrator should review the list of libraries to ensure that they are linked to trusted applications.

  any help with this error?

  Atul

  Description: NVIDIA shim dll initialization

  Product: Shim NVIDIA D3D drivers
  Company: NVIDIA Corporationhttp://systemexplorer.net/file-database/file/nvinit-dll/33069751

  I would not be concerned by this driver.

• PDF is not the same aspect in Acrobat 10.1.8 and 11.0.04

  Since the installation of Adobe Creative cloud I ran this question a couple of times.

  If I open the same pdf file in Acrobat X and XI Acrobat I get different results on screen and when you print to a color printer.

  In the screenshot I attached the left side is the pdf file in Acrobat 10.1.8 and right the same pdf in Acrobat 11.0.04.

  Any ideas on how to get the same result? The way she looks in Acrobat 10.1.8 is correct.

  

  Make sure the settings under Display Page Edit - Preferences - are the

  even in the two applications.

• Get the Error Message When you try to download and install Vista Service Pack 1

  Hello

  Update Windows guard neglect when you try to download and install Vista Service Pack 1 and I get the error message 80092004.  Please notify.

  Thank you
  Andy

  Hello

  Welcome to the windows vista forums.

  1. stop the Windows Update service (make sure that you are logged on as administrator)

  Click the Start button | Control Panel | System and Maintenance | Administration tools
  Double-click Services.
  (Provide the administrator password or a confirmation if prompted to do so.)
  Right-click the Windows Update service and click on stop.

  2. Click Start, type %windir%\System32 in the search box and press ENTER.

  Find and rename the folder C:\Windows\SoftwareDistribution.

  3. start the Windows Update service

  Start button | Control Panel | System and Maintenance | Administration tools
  Double-click Services.
  (Provide the administrator password or a confirmation if prompted to do so.)
  Right-click the Windows Update service and click Start.

  This procedure will erase your history on the Windows Update Site. Not important.

  Don't forget to restart and then try the update again. If there is no corruption in that
  folder, it would be gone now.

   

  Please, try now to windows update and check if you get the error.

  You can also download the stand-alone SP1 package. You can download the windows vista SP1 by clicking on the link below, please follow the instructions in method 3 in the KB article:

  http://support.Microsoft.com/kb/935791#Method3

  I hope this information is useful.

  Please let us know if you need further assistance.

  Concerning
  Rehman - Microsoft Support