custom types are not valid

Similar Questions

• DataSource can be something unknown or custom. Its properties are not validated.

  Hello

  I found what looked like what I tried to do... data sources of QML.

  So I find this documentation: https://developer.blackberry.com/cascades/documentation/device_platform/data_access/using_data_sourc...

  I followed him all the way. But when I run my application, I get my app but no list in it. The background is white. All my items tabs and actions show. Than no list!

  DataSource {
                              id: dataSource
                              source: "assets/countries.json"
                              remote: false
                              onDataLoaded: {
                                  dataModel.insertList(data);
                              }
                          }
  

  There is an 'i' next to the data source implementation in the IDE that says: "DataSource can be something unknown or custom. Its properties are not validated. »

   

  So, what gives, ideas?

  Never mind. I will answer.

  The source must not have the 'active' before the json file. The API reference clearly states: in QML, this path is compared to the document QML in which this data source is declared.

   

  My json file in the current folder, so was not need to prefix it.

• Message error "data of this type are not supported.

  Original title: cannot run files as an administator?

  I can very well run files (.exe, ect)
  I can't just stuff like an administrator lance. I usually get the error message: "the data of this type are not supported" I tried to pass microsoft too download a 'fix - it' too, but when I try to run too .msi it say 'Administator blocked privledges' or something of the sort.
  Everything works completely fine 100% in safe mode.
  It happened after I did a virus with malware bytes scan and deleted a virus derived from 'PrivitizeVPN' that is a VPN that was actually a virus.

  Hi Raul,

  Use the Microsoft Safety Scanner in full scan mode and remove all threats that is not detected by it and see if the problem persists.

  Microsoft safety scanner

  Note: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  The Microsoft Safety Scanner is not a replacement for the use of antivirus software that offers continuous protection.

  Please make a backup of all the data to an external hard drive before performing a scan because it might cause data loss.

  Answer please if you have any questions.

• Hello... I need your help... Buy a license and do not know if I use it since all the programs you download testing me and departs to download a specific application (Flash) asked me identification information, he placed and are not valid. There are other

  I need your help... Buy a license and do not know if I use it since all the programs you download testing me and departs to download a specific application (Flash) asked me identification information, he placed and are not valid. There are other credentials?

  Your subscription to cloud shows correctly on your account page?

  If you have more than one email, you will be sure that you use the right Adobe ID?

  https://www.adobe.com/account.html for subscriptions on your page from Adobe

  .

  If Yes

  Some general information for a subscription of cloud

  Cloud programs don't use serial... numbers you, connect you to your cloud account paying to download & install & activate... you may need to sign out of the cloud and restart your computer and log into the cloud for things to work

  Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud

  -Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html

  -http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

  -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  -http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html

  -ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp

  -http://helpx.adobe.com/creative-cloud/kb/license-this-software.html

  .

  If no

  This is an open forum, Adobe support... you need Adobe personnel to help

  Adobe contact information - http://helpx.adobe.com/contact.html

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  -Select your product and what you need help with

  -Click on the blue box "still need help? Contact us. "

• Updated since CF10 CF11 error: configuration of page data are not valid.

  Anyone having problems with CF11 put cache files CF10 when they upgrade?  Where can I change the settings to the directory ColdFusion 11 rather than 10 ColdFusion?

  HTTP 500.19 - internal error in the server error

  The requested page cannot be accessed because the configuration data of the page are not valid.

  Module	IIS Web Core
  Notification	BeginRequest
  Handler	Not yet determined
  Error code	0 x 80070003
  Config error	Cannot read the configuration file
  Configuration file	\\?\C:\ColdFusion10\cfusion\wwwroot\ipmcenters_org\web.config

  When you were on 10 ColdFusion, were serve you content in ColdFusion web root (\ColdFusion10\cfusion\wwwroot\...)?  This seems to be the case based on the above error.  If you use IIS, you should not use the sites off ColdFusion web root.  If you have to, use IIS web root (C:\inetpub\wwwroot), although it is best to put your files on the web on a completely different disc of your OS (and ColdFusion must be it's own separate disk).  So here's what I do (based on the different ColdFusion lockdown guides):

  C: - OS file

  D: - Installing ColdFusion (D:\ColdFusion10\...)

  E: - websites (E:\WebSites\site1, E:\WebSites\site2, etc.)

  The web.config file is an IIS configuration file (and the HTTP 500.19 error comes to IIS).  This indicates that your IIS site configuration is probably at fault.  You can take things apart and rebuild the site by lockdown CF11 guide and rebuild the site in IIS as a result.

• ORA-20001: APP-FND-02604: one or more of the following data are not valid

  Hello
  
  I use the fnd_user_pkg.addResp procedure to add the responsibility of self-service to a group of users with the script below:
  
  Start
  for e in loop (SELECT a domain NAME)
  -dbms_output.put_line (e.name); just to confirm the names are there
  fnd_user_pkg.addResp (e.name, 'BY', 'CBK_EMPLOYEE_DIRECT_ACCESS', 'STANDARD', 'CBK Employee Self Service', sysdate, null);
  end loop;
  end;
  */*
  
  
  eld table contains the names of users to add, in capital letters. When I try to run the script, it fails with the error:
  
  ERROR on line 1:
  ORA-20001: APP-FND-02604: one or more of the following data are not valid:
  APPLICATION_SHORT_NAME =, RESPONSIBILITY_KEY = CBK_EMPLOYEE_DIRECT_ACCESS,
  SECURITY_GROUP = STANDARD.
  ORA-06512: at the 'APPS '. APP_EXCEPTION", line 72
  ORA-06512: at the 'APPS '. FND_USER_PKG', line 2713
  ORA-06512: at line 4 level
  
  
  However when I run the procedure of inserting a single user at a time, it ends without error. A popular thought.
  
  Dula

  Hello

  User_id = this will come from the fnd_user table?

  Fix.

  responsibility_application_id and responsibility_id = this will be retrieved through a query joining the tables?

  You can find it in the FND_RESPONSIBILITY, FND_RESPONSIBILITY_TL tables... See the site for more details--> http://etrm.oracle.com eTRM

  Thank you
  Hussein

• Does anyone know if all the widgets of HotSpots are not valid in Captivate 8?

  Just got the latest installed version today, use 7 and did the test of 8... re-learn myself I tried some different HotSpots widgets but they all upward as a widget not valid.  Is this a bug?   They seem to work before.

  The real widgets are in the Gallery\Widgets not in this subfolder, that's why you get the message. You mix different types of objects, these are animations, normally you go if you want to change the "hot spots" for this type of question.

  If you want regardless, because they are just flash animations, you must use the media, Animation button. ATTENTION: this will work only for SWF output, not for the release of HTML5.

• Satellite U305 - new Intel drivers are not validated

  I have a problem installing the latest graphics drivers for the Intel 965 express. Whenever I get a message that the driver is not validated for this computer.
  I got my drivers directly from the Intel site because those are the most recent (Toshiba site gives 2007 drivers only), but they did not work.
  Looks somehow Toshiba blocks this driver for a reason, but I do not know why

  Computer:
  Toshiba Satellite U305
  Installation of Windows Vista Home Premium (32 bit)

  Hello!

  I had the same problem on my laptop Satellite U400. I solved this problem on this way:

  Before I installed the new driver I deleted the old version. You should find it in Control Panel > Add/Remove programs. Then, restart your laptop.
  After reboot, you will get the error message I think but, you can install the driver manual. Go to Device Manager, select the graphics card. Click on set to update driver and use the Advanced installation. In the next windows choose the driver directory yourself.

  After restarting the laptop the new driver must be installed.

  Welcome them

• the dynamic types are not picked up by - ("com.vmware.library.vcaccafe.asd.customresources") .getAvailableInventoryTypes

  Try to get our host vCAC recognize/import the type Dynamics/object classes and create custom resources. The call to action 'createCustomResourceFromInventoryType '. The inventory of the available dynamic types is not returned. As vCO using test research of the api; I see the DynamicTypes under the namespace created for them. Of course, they exist in the inventory of vco under dynamic types. Test the code below:

  type host = vCACCAFE:VCACHost

  var inventoryTypes = System.getModule("com.vmware.library.vcaccafe.asd.customresources").getAvailableInventoryTypes (host);

  for each (var inventoryType in inventoryTypes)

  {

  If (inventoryType.GetName (). IndexOf ('case'). = -1)

  System.log (inventoryType.GetName ());

  }

  Basically just get returned undefined. It doesn't seem like a problem of vCO. It seems that just vCAC is unable to recognize the dynamic types.

  Have had problems with vCAC and DT vCO plugins in the past and have tried several permutations of plugin removal/relocation, (KB2003386) including the file, restart the server and delete Configurator package & dar and then reload. These versions using:

  DynamicTypes 1.0.0.1951696

  vCAC 6.1.0.2073620

  vCAC Infra 6.1.0.2040915

  something stupid in the end... Turns out be the default vCO server which is the embedded server vCO in vCAC. Replace that in the Red hight of the vCO uses the vCAC org - and it's good.

  

• SYS packages are not valid in oracle 10g (10.2.0.4)

  I use Oracle 10 g (10.2.0.4) in AIX 6.1 server. According to OEM advice I remove the privilege of "utl_file.
  the PUBLIC user. At the moment I get the "SYS" schema invalid packets. I once again give the
  grant permission to the 'UTL_FILE' to the PUBLIC user but the SYS schema packets are remain invalid.
  
  I compile packages several times but the problem not solved. If a single package make it valid
  then, another package passes not VALID when compiling. Now, how can I activate the
  Package of the SYS user. The problem is only with packages and views now...
  
  Could someone please help me now...

  shipon_97 wrote:
  I use Oracle 10 g (10.2.0.4) in AIX 6.1 server. According to OEM advice I remove the privilege of "utl_file.
  the PUBLIC user. At the moment I get the "SYS" schema invalid packets. I once again give the
  grant permission to the 'UTL_FILE' to the PUBLIC user but the SYS schema packets are remain invalid.

  I compile packages several times but the problem not solved. If a single package make it valid
  then, another package passes not VALID when compiling. Now, how can I activate the
  Package of the SYS user. The problem is related only with packages & views now...

  Could someone please help me now...

  Try to compile all the objects with 'UTLRP.sql' on the server, then check the invalid objects.

  conn / as sysdba
  @?/rdbms/admin/utlrp.sql 
  

  Concerning
  Z.K.
  http://oracleendeavor.blogspot.com/

• Timestamp for date columns data type are not imported in discoverer admin

  Hi all
  Someone you will suggest why timestamp data type columns are not imported into admin. discoverer other types of data import you correctly, but the timestamp data type columns are missed.
  
  Please let me know to change the type of data is not possible at this time.
  Thank you

  Hello
  You will be disappointed because the timestamp columns are not one of the recognized data types supported by the discoverer. He acknowledges only dates, strings and (integer and decimal) numbers.

  Maybe you could put up a view that matches the table you use, convert the timestamp in a rather ordinary date?

  Then, inside your end-user license, all you would have to do is redirect the folder to view.

  Best wishes
  Michael

• On initial Setup, I enter a computer name using only valid characters and get an error message saying that some characters are not valid.

  I installed Win7 using a .wim that I used successfully several times before. The .wim is on my USB and the computer is not connected to the network. Using a disk to start Windows PE and imagex, I applied the image. When Windows 7 was started for the first time and prompted me to a computer name, I entered a name with only lower and upper case characters. An error message told me that some characters that I had used were not valid and listed the characters not valid, which I had used.

  What is my next course of action?

  I did a hard reboot and Windows later accepted my computer name.

  This has been resolved.

• Custom events are not heard or sent successfully

  Hey guys, I did experiments with the writing of my first custom event.  So I have a MovieClip class in the library called "curtains."  He plays an animation and at the end of the animation, I have the code:

  Stop();

  dispatchEvent (new Event ("closed"));

  Now, I create an instance of this MC curtains in my class below.  The custom event is not detected.  Did I put the event listener in the wrong place?  What I've done wrong?

  package {}

  import flash.utils.Timer;

  import flash.events. *;

  import flash.display. *;

  SerializableAttribute public class TransitionTimer extends MovieClip {}

  var localTimer:Timer = new Timer (4000,1);

  curtains: curtains of var = new Curtains();

  public void TransitionTimer() {}

  localTimer.addEventListener (TimerEvent.TIMER_COMPLETE, playTransition, false, 0, true);

  addEventListener (Event.ADDED_TO_STAGE, addedHandler);

  }

  public void addedHandler(e:Event):void {}

  starts the timer which called Transition curtain

  localTimer.start ();

  Adds the event listener for the custom event 'closed' to frame 27 curtains MC.

  curtains.addEventListener ("closed", loadNextScreen);

  }

  public void playTransition(e:TimerEvent):void {}

  addChild (curtains);

  }

  public void loadNextScreen(e:Event):void {}

  trace ("loadNextScreen");

  curtains.gotoAndPlay ("open");

  }

  }

  }

  Thanks in advance for any help

  Add a track to your class TransitionTimer to confirm that it is used as the document class.

  Add a line to the last frame of your movieclip where your 'closed' event is dispatched.

  Copy and paste the instructions of tracing so that might not be obvious what is your problem.

• Custom properties are not displayed on the data portal

  In my version of return of DIAdem (2011), there are features to display personalized data portal properties. If selected by right-clicking on the data portal properties would appear under the root, the group or channel where they were stored. So far I have not been able to find this menu in 2014 DIAdem. This feature has been removed?

  Hi DIAdemUser1,

  In fact, this feature has been removed.  R & D wanted caused more confusion than benefit, and I agree.  I'm sorry for you and others who liked the feature that has now disappeared.  When tiara 9.0 released custom in the data portal properties shows their data types, but this feature has been removed in favour of simplicity.  I often miss this feature, but it's for the greater good.

  Brad Turpin

  Tiara Product Support Engineer

  National Instruments

• Some file types are not not in the settings of Applications

  OS: Windows XP SP3
  Firefox 4.0 & Pale Moon 4.0.5

  I have a problem when I download files from the executable (.exe) type. Previously, I checked the sign while Firefox will automatically download the file via the Download Manager. Unfortunately, some sites do not allow download with it. But when I want to change the setting, I can't find the type of executable files in the application settings. So, how I normally redownload? Help, please!

  I think that you need should be in settings of the add-on - we.

  Firefox tools > Options > Applications is for downloads that are in need of an application to open. The executables are designed to run directly on the operating system rather than be opened by another application. In addition, executable files are generally sent from the server with a generic binary file header, so Firefox will not be able to match up to the top with a particular file type.