Custom user interface does not update

Similar Questions

• custom user interface will not close

  Hello

  I have created a custom UI TS, based on the graphic interface delivered simple TS. When I close the user interface, the process remains in the list of windows processes, I can put an end from the windows Task Manager. This only happens if the adapter of LabVIEW is set to Run-Tiime engine. If I select the LabVIEW development system, the GUI will be entirely closed.

  TestStand 2014 32 bit

  LabVIEW 2014 32 bit

  Windows 7 Enterprise 64-bit

  any idea?

  Hi Madottati,

  the first thing that comes to mind is to close the process programmatically as you do in LV, when you build an executable file. An example how to do this is shown here:

  Work with the TestStand Simple User Interface - (2013 and previous TestStand) LabVIEW - National Instruments
  http://www.NI.com/white-paper/14376/en/

  you want to look at the section 'shutting down '.

  I hope this helps!

• Images of the user interface does not?

  I have this problem that just started to happen. I don't have to open my project within a certain time and now all of a sudden every time that I run through flash builder my entire user interface (all images) load with question marks and I get access denied error when you create a folder in a shared directory. I need to desperately remedy as soon as possible because I need to get an update for my application tomorrow. If this can help I worked in flashbuilder on a different project for some time, but I got my cert backup files. Has anyone seen this happen before?

  Thanks for the replies. I had all the necessary permits and all files were in place. It turns out that there may have been a corrupted project file. Everything has started a new project and copied on all my code and active, linked up all my library references and voila.

• Graphical user interface does not display properly

  Basically I upgraded my windows build 10 to 10122 yesterday. When I launched Firefox, MISTLETOE is totally screwed and makes Firefox unusable on my machine. This seems to be the specific machine as on a computer that is running the same build 10 windows, there is no problem.

  Please see screenshot. Can someone help me solve this problem? What is the cause?

  You can attach a screenshot?

  • http://en.Wikipedia.org/wiki/screenshot
  • https://support.Mozilla.org/KB/how-do-i-create-screenshot-my-problem
  • Use a type of compressed as PNG or JPG image to save the screenshot
  • Make sure you do not exceed the maximum size of 1 MB

  You can try to disable hardware acceleration in Firefox.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.

  You will need to close and restart Firefox after enabling/disabling this setting.

  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes
  • https://support.Mozilla.org/KB/upgrade-graphics-drivers-use-hardware-acceleration

• Waterfalls of the user interface does not support win 8

  Hello I have a problem, I tried to install my stunts BETA 2 in my computer with Win8 but it's install finishing show me an error message "_ - nterface not support."

  Is there any way to solve this problem or I have to redo a downgrade to Win7?

  Hello

  I use stunts and earn 8 a few months now, no problems.

  Bring up a menu contextual (right-click) on the Setup file, select Properties, then the Compatibility tab and set the compatibility for Win 7, it will then install without problem.

• Custom class event does not reach Application?

  Hey everybody,

  It is probably a pretty easy question, but it left me speechless. I can handle the events of user interface components in the Application. I can handle the events of a custom user interface, within its own class object. But the dispatched event of a custom, object of the user interface does not seem to reach the Application. The event is expected to reach Application? Event if an object should be managed within the class of this object, how can I control my program flow?

  Thank you!

  I saw only he made in the settings where they inject an event dispatcher.  If you don't want to use a frame, you could have a singleton (vomits in the throat) and pass a UIComponent.  Now remember you this UIComponent must be fixed on the display as list

  var vbox:Group = new Group();

  vbox.dispatchEvent ("myEvent")

  still will not be heard by the rest of the application.  You would have to wait for a user interface component to add pass THEN to your singleton for use in the rest of the application.  Honestly, I didn't think too much about.

• Site Flash does not update unless I click off the site!

  Site Flash does not update unless I click outside of the site and then again on the site!

  My Flash website presents to the user a list of customers to select

  When the user selects a customer of the user is presented with a full discription of the customer

  But when usage goes back to the screen containing all customers and selects another client, the previous client is displayed ' until I have click out of the site, click back on the site ", then the customer profile automatically updated! which is not what I want as I want the customer info to display when the user clicks in the list!

  I have worked on this issue now for 3 weeks so if someone has something to say help please help

  Well, after searching for a month and thinking maybe flex was not capable for dynamic web sites, that I decided to start over with my search

  Turns out that the answer was really simple way just had to clear my mind and think about

  protected function itemrenderer1_mouseOverHandler(event:MouseEvent):void

  {

  Main.ClientData.ClientsID = clientIdNumber.text;

  ScrollPanelSkinClientScrollingContentSkin.getClientResult.token = ScrollPanelSkinClientScrollingContentSkin.customerService.getClient (Main.ClientData.Clien, tID);

  trace ("Trace one113" + Main.ClientData.ClientID);

  }

  As all ways, stupid I feel

• iCal icon does not update

  Hello

  I'm running on one in 27 iMac (mid 2011)

  After the execution of the last update to El Capitan (10.11.4)

  The Calendar iCal icon / does not update the current date.

  • I deleted the icon from the dock and added it
  • I restarted
  • Entered in the user's library and moved the plist on the desktop and restarted...

  Any suggestions?

  Thank you

  Denninc,

  Go to System Preferences > language and region > region:... .and all/re-set "in your area".

  

• Yosemite user model does not

  I have 20 macs in a University laboratory image in the same way, with a user model that I created.  Worked fine for several months.  Lately, the chances that my user model does not load correctly is 50-50.  This takes the form of:

  • the loading dock is generic and does not include my shortlisted apps
  • wallpaper is the default 'Yosemite' image and not the wallpaper that I created
  • or, the mounted drives are not displayed on the desktop.

  

  Pictured above, the bottom image is what I call a wrong profile.  It is in this profile, you can see that the dock, HDD and wallpaper are not loaded; However, things like the Finder and Safari open to the correct location, based on a template.

  I can log in and out of the same machine all day and arrive at a 30 to 50% chance of the model charge properly.  However, I need this number to 99.9%

  Our laboratory is partially controlled by JAMF/Casper to load scripts at startup.   These logon scripts in the form of:

  • load the customer print PHAROS
  • load a "alert of emergency of the University" application in the dock
  • If the user has a folder on our server, xsan, Casper Mont scripts this folder on the desktop (this feature works on our Mavericks stations, but is broken in Yosemite).

  What process occurs when a user connects and the model is pulled?  Is it possible that Casper connect you scripts could be in conflict with the creation of models of the user?

  Solution: The question is a folder called Non_localized, reflect the English.lproj content with this file in template/User.

• Why does not update my Mac/Itunes

  Dear all,

  New to this forum thing but I have no were else to turn.

  I recently bought a new mini Ipad 4 running the latest OS 9.2, however when I have the cable link to my Mac, it is not recognized due to my Mac running an old Itunes.

  So, as any who would put you at day - however, my Mac tells me that I run later: Mac OS X 10.6.8... It does not update further. Then, my Itunes is 11 V. 4 and when I go to apple.com, it won't download any version later i.e. V12

  So now I have an ipad that I can't fully use

  My Mac features;

  Model ID: iMac10, 1

  Processor name: Intel Core 2 Duo

  Processor speed: 3.06 GHz

  Number of processors: 1

  Total number of cores: 2

  L2 Cache: 3 MB

  Memory: 4 GB

  Bus speed: 1.07 GHz

  Many thanks to anyone who has faced a similer problem or knows how to solve this problem

  C.

  PS - I've read about the update OS X El Capitan, but it seems that many people have problems with it, so I have not upgraded to this OS

  "it will be not updated everything.

  That does not mean that you cannot upgrade to a new OS X. There is a difference between an update and upgrade. Just because you read that some users have had problems with El Capitan, does mean you want.

  The minimum requirement of OS X for iTunes 12.3.2 is OS X 10.8.5 or later as shown here > Download iTunes 12.3.2

  If your Mac meets the requirements, you can upgrade for free directly to El Capitan v10.11 > OS X El Capitan - technical specifications

  El Capitan is available for free on the App Store.

  Then you can update iTunes to sync with your new iPad.

  If your Mac does not meet the requirements of El Capitan, see if your Mac can pass to v10.8 Mountain Lion > system requirements for OS X Lion mountain

  If so, you can buy at the Apple Store Mountain Lion > http://www.apple.com/shop/product/D6377Z/A/os-x-mountain-lion

  Apple will send you a confirmation email with a redemption code. You can use this code to purchase on the App Store to download Mountain Lion.

  Very important to read this thing before upgrading to snow Leoaprd > the upgrade of 10.7 and don't forget Rosetta! Apple Support communities

  post edited by: CS

• UIMsg_BreakOnRunTimeError of completely custom user interface management

  I develop a completely custom user interface for TestStand 2012 SP1 operator (without ActiveX / ApplicationMgr etc.;) "I know, I know...).  I'm trying UIMsg_BreakOnRunTimeError to deal appropriately and need advice.

  (1) my first question is what I call DisplayRunTimeErrorDialogEx() with the appropriate SequenceContext, but the dialog box disables many of the options. Under manage common error, recovery, ignore and abandon immediately (without cleaning) are grayed out (disabled) as well as the box jump of. With the same sequence SequenceEditor and the po sample UI display correctly this dialog box.  Any ideas on what is the cause?

  

  (2) Secondly, the best way to manage the selections to the user?  dontShowAgainForExecution, dontShowAgainForBatchand suspendExecution seem quite simple documentation.  i.e.

  If (dontShowAgainForExecution)
  
      execution. RTEOptionForThisExecution = RTEOptions.RTEOption_Continue;
  
  If (dontShowAgainForBatch)
  
      thread. SetBatchRTEOption (RTEOptions.RTEOption_Continue);
  If (suspendExecution is false)
  
      execution. RESUME(); Fix? Execution seems already paused. What to do if this value is true?

  Now what about the runTimeErrorAction?  I guess for RTEOption_Abort the word execution of . Abort().  What are the appropriate steps to RTEOption_Continue, RTEOption_Ignore, RTEOption_Retry, & RTEOption_ShowDialog?

  (3) Finally, once the dialog box is closed, my execution ends with the result success rather than error state.  What happens here?

  Your help is appreciated as always,

  -Terrence Jones

  (1) this is probably the user privileges, you may either not connected with user at all or the user has privileges to debug. If you do not use the users, you can disable the privilege check in the options of the station.

  (2) something like this:

  void ApplyRTESetting (TS:equenceContextPtr sequenceContext, TS::RTEOptions rteOption, bool breakExecution)
  {
  Thread TS::ThreadPtr = sequenceContext-> thread;
  Execution TS::ExecutionPtr = sequenceContext-> run;

  Switch (rteOption)
  {
  case TS::RTEOption_ShowDialog:
  case TS::RTEOption_Continue:
  case TS::RTEOption_Abort:
  wire-> ClearTemporaryBreakpoint();
  break;
  by default:
  break;
  }
      
  do action according to the selected option
  Switch (rteOption)
  {
  case TS::RTEOption_Retry:
  sequenceContext-> NextStepIndex is sequenceContext-> StepIndex;.
  wire-> ClearCurrentRTE();
  If (! breakExecution)
  execution-> Resume();
  break;
  case TS::RTEOption_Continue:
  If (! breakExecution)
  execution-> Resume();
  break;
  case TS::RTEOption_Ignore:
  wire-> ClearCurrentRTE();
  If (! breakExecution)
  execution-> Resume();
  break;
  case TS::RTEOption_Abort:
  execution-> Abort();
  break;
  }
  }

  Also for the two other parameters we generally use the rteoption of the dialog rather than continue to hardcode, but you can do this job, how you want if you prefer different behavior:

  Example:

  If (dontShowAgainForExecution)
  context-> run-> RTEOptionForThisExecution = rteOption;
          
  If (dontShowAgainForBatch)
  context-> thread-> SetBatchRTEOption (rteOption);

  (3) maybe you call ClearCurrentRTE() to ignore alternatives.

  Hope this helps,

  -Doug

• Shared "Top N" gets access denied - the custom user interface

  I shared some dashboards for a standard user to vCops the custom user interface, and the "Top N" widgets do not work.

  So far, everything has been fine.

  I shared a dashboard home, as well as a vCops of the box and a pak of SAP management dashboard.

  All widgets 'Top N' display 'access denied to the requested page.

  Other parts of the same work of dashboard (home).

  Any thoughts?

  There is a permission that you add to the group to which you share the dashboard. There are permissions to a 'Top - N analysis' you must give to this group. In the contrary case, the refusal of access will appear when users in this group are attempting to access the dashboard in question.

• How close/hide dashboard appearance "pinned" in the custom user interface

  There is a dashboard in the custom user interface that is not a small "x" in the upper right tab that would be closed/hidden. Is anyway, in the interface user or cmdline that let me close/hide this dashboard? Screenshot attached. 5.8.2 running

  
  

  Never mind. A dashboard that would not close was marked as "default" dashboard. If you want to close a dashboard that is marked as 'failure', a different dashboard by default and it then you can close the dashboard that you couldn't close before.

• Determine the maximum use of the processor for a virtual computer in the custom user interface

  I want to determine the maximum use of the processor for a virtual computer in the custom user interface.  How can I do this?

  If I use a supermetric, there is no kind of attribute under CPU called "maximum use.

  Certainly, you get points for a long question! Although to be fair, it's probably my fault to feed you so much information to digest at once.

  1. I would say you can do two ways visually. Use the operations > detail view for 'normal ranges' use the upper limit of the normal range as your typical max. You want an absolute peak, add the metric of a graph or observe that highlight high and low watermarks.

  2. There are a lot of ways to display data, but if you want to display a single metric over a period of time, we could use the following widgets [on top of my head]:

  Top - N analysis

  Weather map

  Analysis of distribution of data

  Among these, I think of your desire for a "peak". Who you want real value, which eliminates the weather map. Then, I think that the concept of a 'Summit' and what is the best thing, I think that the 95th percentile... then I came with the widget of data distribution. The decision is ultimately yours given your particular use case.

  3. you can have it apply to several virtual machines - it's just a widget capable of being an independent provider or receiving widget (metrics, DO NOT choose to select resources). Each resource/metric will add to the widget and you can remove them if you like after it is added. You can certainly all the time you visit... It is date and time standard options you have in all the other widgets chart. With the widget data distribution, you want as much time as possible to get an accurate histogram of the cycles of workload.

  4. This is similar to the question above. You can certainly add parameters of individual resource or a DM that summarizes or AVG groups of resources. And as above, the delay is configurable, along with the other graph widgets.

  5. it's part of Q4 - you can sumN or avgN up to any number of resources with a SM, then discovers that SM in the widget of data distribution. When I said container, I mean an application, group resource pool... all that acts as a container parent within the vCOps.

  6. that's correct, SMs calc using data collected last points... aka single period of time. When you are referring to the longest period, I gave you a few examples of the attributes that are composed of several periods of time which are calculated and created by the adapter for VMware vCenter behvaior. In this case, you have the GVA 15 min CPU 1.5; These specific simple mobile GVA can be specific OR a copy using SMs. Next, you will have the chance is to find a way to distribute what you need through a widget [at that time].

  7. the distribution of data is not for export, it is for Visual functions. If you want the data in CSV, just use a typical chart of metrics and export to a csv and calc your own pics, avg, 95th, whatever.

  8. This is a bit of a mix of all your questions, put in place.

  You are right, if you added those 3 VMs, then calc was the 95th of the AVG. Like Q7, you would not export the data of the distribution of data because the raw data points are not - you do not pass the metric to a metric graphics standard and export via csv.

  Take advantage of...

• Error 503 in a custom user interface

  Hello

  I have VAPP OPs 5.0.1. After watching emailFilter.xml and quiting this file. I can not connect to the custom user interface with any problem with vsphere UI. WHY?

  error:

  The web server is not available. You will be re-directed when the service is available.

  Are you sure that you do not corrupt the file? A defective xml file can take down the custom user interface. If you have no change tried to replace it with the backup file created before editing it?

  Have you tried to restart the server via the admin INTERFACE?