Problem on Portege R100 SD card reader - SOLVED

Similar Questions

• HP Elitepad 900 G1 - problem with built in SD card reader.

  Hello.

  IM was a proud owner of HP Elitepad 900 G1 up to the point where I tried to put a 8 GB miniSD card in to built in card reader.

  The map was visible in the windows Explorer 8 for 15 seconds. Then he disappeared.

  After a long battle with drivers, internet solutions etc (nothing worked btw.) I ve installed windows 8.1 update.

  It still does not work.

  My card works perfectly in all the other electronic stuff (laptop computer, mobile phone).

  Can someone help me?

  I think I solved this problem. (Sorry for my English but I'm Italian).

  The solution is very simple, I tried several times and in my opinion, it works.

  It is necessary only to disable 'Quick start' options in Windows 8 / 8.1

  -WIN + X key, then go to 'Power Options'.

  ' - 'Choose what the switch / do"(click on it)

  "-"Change settings that are currently unavaiable"(click)

  -In 'settings Shoutdown', uncheck the 'enable quick start (recommended)'.

  Please tell me if it works for you.

• Portege Z30 - smart card reader does not work

  Hi, I just got my new Portege Z30 a few days ago.
  I try to use the card reader chip for my Spanish ID (DNIe) and seems to not work.
  When I insert the card as stated in the users manual, nothing happens.
  I have to player of SC "actuvate" somehow?

  (DNIe needs a compatible with ISO7816 SC reader, as one installed in my laptop seems to be)

  Usually you should not activate anything. Check the status of card reader in Device Manager please. There is everything OK?

  Make sure that you use a compatible card and it is inserted correctly.

• Optical USB mouse problem with Portege R100 on windows XP

  We have three laptops Toshiba Portege R100 currently giving problems with mouse optical usb from Toshiba.

  When starting the laptop, that the mouse is not recognized by windows. Before and after will be identified in the mouse will not respond while Burns led.

  The mouse will be recognized after re - plug in the USB port.

  We have updated versions of bios to the latest version. (1.4)

  Another mouse (USB optical) works OK without problem.

  We have removed the drivers and reinstalled by windows plug-and-play process, but it does not work.

  Is this a known issue?

  Thanks in advance

  Hello
  would it be possible that the USB mouse has high power consumption?

  As far as I know, there are a load of maximum intensity for each USB Port.

  Do you know how much power (intensity) needs to this mouse?

  Good bye

• Linux for Portege 2010 SD card reader driver / controller

  Hello
  I use Ubuntu Linux 6.10 on my Portege 2010. Things seem to work well, but I'm unable to download a driver for my SD card unit.
  Issues related to the:
  1. where can I find it?
  2 - is the SD card controller in this support of laptops SD Host Controller Specification of the Association from the SD card to http://www.sdcard.org/HostController/index.html?
  3. what chipset using this SD card controller? I can't find any documentation on the subject.

  My Toshiba Portege 2010 has the following entry of the ICP for the sd card controller:
  $lspci - n
  00:12.0 0880: 1179:0805 (rev 03)
  $lspci - vv
  00:12.0 peripheral system: Toshiba America Info Systems SD TypA Controller (rev 03)
  Subsystem: Device of Toshiba America Information Systems unknown 0001
  Control: I/o - Mem + BusMaster - SpecCycle - MemWINV - VGASnoop - ParErr - Stepping - SERR - FastB2B-
  Status: Cap + 66 MHz-UDF-FastB2B-ParErr-DEVSEL = medium > TAbort - SERR.<>
  Interruption: pin has routed to the IRQ 11
  Region 0: Memory at f7ebdc00 (32-bit, non-prefetchable) [size = 512]

  Hello

  I'm really skeptical to find the right driver for SD card controller. Toshiba has designed all the drivers for supported Windows XP operating system but not for Linux.

  As far as I know for all those people who want to use Linux on a Toshiba laptops, Toshiba built an Infrastructure to support. Check please the content of the following pages:
  http://newsletter.toshiba-tro.de/main/index.html
  http://Linux.Toshiba-DME.co.jp/Linux/index.htm

  Good bye

• USB card reader problem

  I had problem with a USB SD card reader. Can I use the card reader in another PC, but when I use it will be my home PC, it always fails, and try again to load the driver.

  Is it possible that I have delete all the USB setting and rediscover the USB device again?

  Hi, surfer,

  Of course, open the Device Manager and uninstall the device.

  Make sure you have the driver handy to reinstall if it does.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• The Windows XP Explorer crash when checking the USB SD OEM-builtin card reader properties

  Hello, people.

  It's my only known PC malfunction, and initially, it worked without problem. The question began at a time not very long before a recent update failure. The problem is related to the card reader SD OEM-builtin of the Pavilion. Windows XP is unable to connect to this player when my 4 GB SDHC card is slipped into the SD card reader, an error box quote as 'due to an error IO peripheral."  and somehow this blocks / crashes Windows explore (IE no.not) with the 4 GB card in drive F:-SD reader.  But Windows and the reader work very well when my 32 MB SDHC card reading. Both the 4 GB and 32 MB cards work fine in my Canon Power Shot and I can download the contents of the card of 4 GB (JPEG format) via a mini-USB cable for the camera as always, but burning the battery juice in the batteries in the camera. I'd rather take the camera SDHC card and empty its JPEG files in the SD drive. I don't think that it is able, barely used player until three or four months ago. I'll also post this question to the Canon forum and maybe HP forum, but I would like to have some ideas as well on the side of Windows.

  It occurs to me, I don't know how many contacts on the card is active in dealing with the 32 MB. I expect that the 4 GB card should use almost all of the pins; I was wondering if a unused pin in size of 32 MB can be failed do contact and this could corrupt the ease of use of the 4 GB card.

  FYI - my system is HP Pavilion a1020n, five years old. It includes the processor Intel P4 CPU, has 130 GB free on the system partition, and has been upgraded from two years to 2 GB RAM DDR2 PC2 - 4200. OS is Win XP Professional x 86 SP3 with .net all Frameworks 1.1, 2.0, 3.0, 3.5, 4 customer and extended 4, IE 8.00.6001.18702, most Silverlight 4.0.50917.0 to patched. All the .NET Frameworks are patched, except that the last .NET two patches for the version 2.0 and 3.5, KB2418241 and KB2416473, both failed several trying to install, and I'm looking for help with that in a posted question, but if you think of these malf are linked, please let me know.

  Any suggestions on Win Explorer and the card 4 GB SDHC, anybody?

  It's my only known PC malfunction...

  Given your other two sons, which does not seem to be the case:

  CF. http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/6e4db953-8811-438c-bffe-0ca401729b57

  CF. http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/79b90924-e2b3-4bff-b854-596632cdcef6

  Please answer all the questions of diagnostic following by number in your very next answer (no need to quote this post):

  1. when (date approximately) installed WinXP SP3?

  2. what application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  3A give Norton or McAfee application already installed on this machine?

  4. do you have a Norton or McAfee free trial come preinstalled on the computer when you bought it? (No matter if you have never used or activated).

  5. have you already had the opportunity to do a Repair Installation or a clean installation of Windows XP for some reason any?

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Photosmart 8450: Does the Photosmart 8450 under Windows 7 64-bit card reader work?

  Under Windows XP 32 bit card on my Photosmart 8450 network reader appeared as a network drive in Windows Explorer. Now that I've migrated to Windows 7 64 bit I get no network drive and if I put an SD card in the drive I get a 'map' mistake of access on the display panel. It is to be expected with the built-in drivers for Win 7? If so, is there no work around?

  Hello

  Thanks for the reply and sorry for not getting back sooner. Been strongly concerned about the end.

  I just find the solution to both problems.

  1. the card reader does not accept SD - HC cards. When I put an ordinary SD it worked fine.

  2 network drive mapping could not find the printer, even if I can print to it without any problems. I had recently also changed the router and discovered that the IP assigned to the printer was within the range of IP addresses assigned by DHCP. Changed static address to + 1.  Still did not work; posted in printer address was unidentifiable. Sitched printer, pulled ethernet cable outlet, turned on, plugged the ethernet cable. Bingo! The network drive works now.

• digital multimedia card reader is not recognized by the windows operating system 7

  is there a solution to my problem with the digital media card reader not recognized by using the windows operating system 7

  This card reader appears in Device Manager?  If Yes, then you have a problem with Windows 7 'default' to not show empty removable disks, which aren't floppy drive.

• On the Portege M800-11J SD card reader problems

  Hi all

  I hope that someone here will be able to help me with a problem. I have a new laptop Portege M800-11J and I try to use a 4 GB SD card in the embedded player. The laptop crashes and allow me to format the card or read. If I use a USB drive, it works without any problem.

  Through Google, I read that there may be problems with some drives and 4 GB cards.

  Anyone else has this problem or offer a solution? I did the driver regular re - installs etc.

  Thank you

  Adam

  What is an SD (FAT16)?

  Or is this a card SDHC (FAT32)?

  The M800 must be compatible with SDHC cards, so maybe it's a driver conflict. Or maybe the pins inside the drive is damaged and cause a short circuit.

  Have you updated the BIOS?

• My SD card reader stop working, no idea how to solve this problem.

  SD card reader worked fine until I tried a new high speed one.  Now computer will not read any SD cards.  I closed the computer and restarted which did not solve the problem.  I have a Pavilion g7-1227 nr notebook PC

  You don't mention which operating system you have. Download and reinstall the driver for him and we'll see if that fixes it.

  Windows 7 (64-bit), you can download it here

  Windows 8 (64-bit), you can download it here

  Windows 8 (32-bit), you can download it here

  Please let me know if this can help,

• Portege R500 - fingerprint reader and SD card reader does not work

  Hello

  I hope someone can help me.

  I bought an opportunity Portege R500 (the warranty is still available until 12/2010) and set up with Windows 7 Home Premium.

  I installed all the drivers for Windows 7 from the specific model support page. Driver Vista have been installed for all drivers, which are not available in Windows 7.

  If everything works fine, except the fingerprint reader and the sd card slot.

  Fingerprints: I tried al a lot of drivers, even that of the R600 and R700 (such as proposed by someone here in the forum). When I run the Toshiba fingerprint utility, a text box tells me, that there is no connection with the sensor. Authentc software does not work either.

  SD card reader: I tried several SD cards from a card SD 2 GB simple and old (but functional) Kingston. According to the Director of devicce, the driver is correctly installed and running.
  The blue icon next to wireless light turns on and after a "long", a message box appears and asks me to format the card. It takes a little longer and then I get the massage, the card cannot be formatted. I tried the same procedure with a SDHC card 4 GB and a Micro SDHC card in a SD card adapter. Then of course the cards are identified but not usable and formatted.

  There are several reports of other users of the internet, the locations of sd card in computer models laptops different toshiba have problems under Windows 7.

  The two problems have emerged as well under Vista. My hope was, this upgrade to Win 7 solve poverty. Unfortunately remain the problems of th I have Win 7.

  Thanks in advance,

  Michael (Germany)

  Thanks for the feedback second
  By the way; It is a forum for user to user in this community, everyone is trying to help everyone, so if someone wants to say that he would be able to help, then you will get a response from such user maybe you should also pass a few simple threads in this forum and might help other users as well?

  Tip; BIOS update and setting BIOS by default (with F9) can solve many problems... it's worth a try...

  By the way; Win 7 is able to update the drivers automatically. I recommend that you run an update in Device Manager and let windows search for the update.

  I ve got another laptop and installed Win 7 as well. The card reader Vista driver has worked for me on Win 7 OS just a tip

• Portege A600-175 - failed to start the card reader device

  I got a Portege A600-175 running windows XP SP3 with a problem in the card reader device. Insert an SD card, it makes the sound that USB devices usually do when inserted (and also when it is removed) bur it doesn t appear on my computer. Do the Device Manager, it appears as a disc with an exclamation point on it and in properties, I see the error this device cannot start. (Code 10)

  I ve already removed the device and let windows find and install again but the problem persists.

  Thanks in advance for looking into it.

  Hi fjdc,.

  I think that you should look for an update to the driver on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Remove the old version, restart the computer and install the version of the Toshiba page.

• Problem of Eve Portege R100

  Dear friends,
  I have a problem with my newly purchased Portege R100. When I try to switch (or in hibernation mode, in fact), it starts the process and then stops and displays an error message saying that it is in conflict with the keyboard player and I might need to update this.
  Of course when I try to update, it shows not any update for the keyboard drivers.
  I was wondering if anyone has experienced the same problem and how you solved it.

  Thank you
  Riccardo

  Hi Riccardo

  As far as I know, this problem may occur if you use the external keyboard because for now what laptop enters standby or hibernation to stop all active processes. Now there may be some conflicts because many programs or processes can make the problems by putting off circuit.

  The external keyboard?

• Portege R500: Card reader SD and ODD do not work - drivers needed

  I have laptop portege R500, product number: PPR50E-04X04WCE.

  last year, I changed the operating system and installed windows 7.
  Since then, I can't use the dvd drive or the sd card reader.
  And the control panel it apears two unknown devices, but I can´t find the controllers for these.

  What can I do to fix this?

  I assume you found unknown devices in Device Manager.
  Check it please http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=78
  Here you can find instructions how to identify the unknown devices.

  I checked the Toshiba download under http://www.toshiba.eu/innovation/download_drivers_bios.jsp page and your Portege is listed there, but under the option ARCHIVE. It is supported for Win7 so there is no problem to install all the drivers available.

  Check it out please and let us know if you still have the same problem.