Graphical user interface does not display properly

Similar Questions

• Satellite P200 accidents + message: graphic card driver does not work properly

  Hello

  hope that this issue has not been covered before, but I've owned a Satellite P200 for 3 years now, and this week, it crashes all the time.

  When it started going down he gave me a few messages in the sense of "your graphics card/driver does not work properly and windows will be arrested to avoid damage.

  It has progressed to the point where now when I turn it on, I have vertical lines running down the screen and the screen flashes on and outside. Within 20 seconds, it restores the BSOD - 'there was a problem and windows will be arrested. Error Page_Fault_In_Non_Paged_Area"then stops.

  I ran a system restore but the problem remains.

  I have a feeling that my graphics card is toast. Is this good? Are there any other options to try? Thanks in advance for any answers.

  Matt

  Hello

  Sounds like the GPU problem.
  But try the graphics card driver update.
  Use the most recent driver for your graphics card.

  In addition, clean the fans of portable computers.
  Dust and debris could prevent the cooling fans to turn with the best speed and this could lead to a higher temperature which would lead to overheating.
  Use a jet of compressed air. I also use it and it helps to get rid of dust and debris.

  If this is not enough, then a problem of graphics chip would be possible.

• Interface does not display the names of collection?

  I will firstly to apologize if I'm not using the right terminology - I googled this and still not sure I found the right words.

  I use a MacBook Pro with the retina display 2015 (in which case it is important). I imported just my main library, about 50K images from Aperture in Lightroom. My photos are all referenced images, and I use a hierarchical structure, both on the HARD drive where data is stored, as well as in the opening. The hierarchy is < folder for the year of shooting > / < month shoot folder > / < project named "DD-MM-AA shoot name" >. Aperture images were always in this lowest level project... so if I went to a project called "13/04/15 Muir Woods", I knew exactly which pushes I was watching.

  So now... in Lightroom my images have the same structure (and they are still referenced files), BUT - in the name of the collection does not appear in the sidebar. The name of the collection shows that "0":

  

  The strange thing is - in the section where it shows me the number of photos in the collection, how many are selected, etc, it shows me the name of the collection:

  

  Is it possible to have the show in the sidebar of the actual name of the collection in the sidebar?

  Right click on the above folder, or the drive and select Show Parent. Who could straighten

• Facebook does not display properly

  After that my nephew has used my laptop to go online to play games, I started to have problems with Firefox loading slowly and do not loading pages, such as Facebook, correctly. I'm now receive messages from untrusted connection on all https sites and Facebook, I get a message from a script does not load successfully. This only happens in Firefox. I have reset the cache and Firefox to rest. I have also reinstalled the latest version of Firefox and nothing has changed. I ran scans with McAfee and Microsoft Security Essentials. The two don't nothing found.

  Sometimes a problem with Firefox can be a result of malware installed on your computer, you may not be aware of.

  You can try these free programs to search for malicious software that work with your existing anti-virus software:

  • Microsoft safety scanner
  • MalwareBytes' Anti-Malware
  • TDSSKiller - AntiRootkit utility
  • Hitman Pro
  • ESET Online Scanner

  Microsoft Security Essentials is a good permanent antivirus for Windows 7/Vista/XP, if you do not already have one.

  More information can be found in the article troubleshooting Firefox problems caused by malware .

  This solve your problems? Please report to us!

• Title of song-Player Windows Media does not display properly when played

  Problem with Media Player

  The box on the bottom of my screen shows 1 song, but another play!  This has never happened before... How can I fix this so that they match?

  Hi Catwoman,

  Follow the steps below and check if that helps you solve the problem with Windows Media Player.

  You can try to clear the database of Windows Media Player and check if it helps to load the music into the library and if you can play all the songs.

  To do this, follow these steps:

  Step 1

  1. exit Windows Media Player.

  2. for Windows 7: click Start, click Run, type Player, %LOCALAPPDATA%\Microsoft\Media , andclicknext OK.

  3. Select all the files in the folder, and then click delete on the file menu.

  Note you don't have to remove the folders that are in this folder.

  4. restart Windows Media Player.

  Note Windows Media Player automatically rebuilds the database.

   

  Step 2

   

  If this does not resolve the problem, disable the Windows Media Playercache of database files. To do this, follow these steps:

  1. exit Windows Media Player.

  2. If you are running Windows 7, click Start, click Run, type % LOCALAPPDATA%\Microsoft, , andclicknext OK.

  3 select the folder Media Player, and then click delete on the file menu.

  4. restart Windows Media Player.

  Note Windows Media Player automatically rebuilds the database.

  Also note before performing the steps above, I suggest to save the songs and try the steps above.

  I hope this helps. Let us know the results.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Images of the user interface does not?

  I have this problem that just started to happen. I don't have to open my project within a certain time and now all of a sudden every time that I run through flash builder my entire user interface (all images) load with question marks and I get access denied error when you create a folder in a shared directory. I need to desperately remedy as soon as possible because I need to get an update for my application tomorrow. If this can help I worked in flashbuilder on a different project for some time, but I got my cert backup files. Has anyone seen this happen before?

  Thanks for the replies. I had all the necessary permits and all files were in place. It turns out that there may have been a corrupted project file. Everything has started a new project and copied on all my code and active, linked up all my library references and voila.

• Custom user interface does not update

  I have to paste a code very long to explain my question, for I can not download the attachment to the forums.

  The ListStyleButtonField has been downloaded from the official website, it's very cool, I think so, but now I faced a problem with this custom user and the PaneViewManager interface.

  Can I use ListStyleButtonField.setText (String text) method to update the text of the list in normal application, but using PaneViewManager is not updated the text, unless you use the keyboard to move the focus to another field.

  In my code, it is a PaneViewManager, 3 parts, and ListStyleButtonSet 3 in Pane1, press 1 to change the text of lists by pressing 2 2 keyboard component and so on.

  For example, in part 1, I press the 1 key, the Pane1 lists need to be changed, but I move the focus on them and then they will be refreshed.

  too much code so shortly before the end of work...
  I would try to call invalid, or, if that fails, return all the elements of the listfield.

• Waterfalls of the user interface does not support win 8

  Hello I have a problem, I tried to install my stunts BETA 2 in my computer with Win8 but it's install finishing show me an error message "_ - nterface not support."

  Is there any way to solve this problem or I have to redo a downgrade to Win7?

  Hello

  I use stunts and earn 8 a few months now, no problems.

  Bring up a menu contextual (right-click) on the Setup file, select Properties, then the Compatibility tab and set the compatibility for Win 7, it will then install without problem.

• Firefox does not display properly and is very laggy on sites with Protection DDoS CloudFlare

  Since 35.0 and especially I get odd behavior on sites with CloudFlare DDoS protection.

  When I open the site in a new window, it really takes a lot of time and sometimes nothing appears and gives me a blank page. and now that she just started saying 'New tab' and I can't hit refresh.

  When the site loads actually after 20 attempts something, the site is lag, any action takes more than 20 seconds.

  When I try to open something, I have a blank page with the URL to tabs. Whenever I try like or post anything, it delays of 15 to 20 seconds.

  The site I'm trying to use with a lot of failure. http://hypixel.NET/

  Anyone else having this problem?

  Have you installed incredibar yourself? Do you want only it? I really think it's that slow you down.
  Its a diversion ad-ware here is how to uninstall it http://malwaretips.com/blogs/remove-mystart-by-incredibar-virus/

• ATI Graphics Driver does not work properly

  All of a sudden when I play my games on Facebook my computer completely freezes. Reports error saying that the ATI Graphics Driver does not work properly.
  I have checked all the updates of Windows, said that I installed all available updates. Help, please!

  Hello

  First manually check the updated drivers with ATI and ask their support and Forums on all known
  questions. Use the methods to update the following drivers.

  Download the Catalyst Drivers here
  http://game.AMD.com/us-en/drivers_catalyst.aspx

  ATI - Forums
  http://forums.AMD.com/game/categories.cfm?CATID=260&forumid=11

  ATI - Support and drivers
  http://support.AMD.com/us/pages/AMDSupportHub.aspx

  ============================================================================

  Other troubleshooting methods would include the boot minimum and others who might help determine
  the cause and eliminate problems.

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  Hope these helps.

• Camera RAW does not display my Canon 5 d MK III properly files.

  Camera RAW does not display my Canon 5 d MK III properly files. I have version 9.3.1. The same file is correctly shown in Lightroom and when I open this file in Camera RAW in Photoshop the image appears correctly.

  Please watch

  Hi Theovanh,

  Could you please let me know what is the problem with images in Camera Raw.

  Also, please uncheck the option "use graphics processor" in Camera Raw preferences.

  Kind regards

  Tanuj

• Problems with my slower... graphic AGA and external monitor does not display

  First of all, let me say that I am not computer savy.  I just bought an Alienware 17 June 1.  Got my AGA and installed a Geoforce GTX 980 inside graphics card.  First I tried as far as I know (which is not yet much about computers) to connect an external monitor to the AGM.  For some reason that the monitor does not display anything and my laptop States there is not all the other monitors it can detect.  Now, the other problem I have is that I run games using my AGA and when its connected I can really see my games download restless and slower.  I thought that the whole purpose of the AGM was pushed my graphics and do amazing things... not very frustrating.  Any suggestions on what I might hurt?

  Try the following:

  Disconnect the graph.

  Uninstall the video card drivers.

  Install the following driver (this version is not in the official Dell support website again, however, it has been tested by our engineers)

  Restart the system and connect the graphic amplifier and test it.

  Please let me know if this helps you solve the problem.

• Since the new update Illustrator does not recognize the graphics card to my SURFACE PRO 2 and the digitizer stylus does not work properly.

  Since the new update Illustrator does not recognize the graphics card to my SURFACE PRO 2 and the digitizer stylus does not work properly.

  Any ideas out there?
  I know the pro 2 surface is not the real model, but at least it should work fine.

  arwinq,

  You can see the system requirements, including the maps here.

  https://helpx.Adobe.com/Illustrator/system-requirements.html

  but I fear that you may be taken in this GPU issue described by butz in post #13 here:

  https://forums.Adobe.com/message/7773402#7773402

  You can try to switch between GPU and CPU by pressing Ctrl / Cmd + E, or you try disabling GPU performance by clicking on the icon of the rocket in the bar of the App, or on the top of the menu bar, deselect the box Performance GPU. You may also uncheck performance GPU in your preferences.

• Yosemite user model does not

  I have 20 macs in a University laboratory image in the same way, with a user model that I created.  Worked fine for several months.  Lately, the chances that my user model does not load correctly is 50-50.  This takes the form of:

  • the loading dock is generic and does not include my shortlisted apps
  • wallpaper is the default 'Yosemite' image and not the wallpaper that I created
  • or, the mounted drives are not displayed on the desktop.

  

  Pictured above, the bottom image is what I call a wrong profile.  It is in this profile, you can see that the dock, HDD and wallpaper are not loaded; However, things like the Finder and Safari open to the correct location, based on a template.

  I can log in and out of the same machine all day and arrive at a 30 to 50% chance of the model charge properly.  However, I need this number to 99.9%

  Our laboratory is partially controlled by JAMF/Casper to load scripts at startup.   These logon scripts in the form of:

  • load the customer print PHAROS
  • load a "alert of emergency of the University" application in the dock
  • If the user has a folder on our server, xsan, Casper Mont scripts this folder on the desktop (this feature works on our Mavericks stations, but is broken in Yosemite).

  What process occurs when a user connects and the model is pulled?  Is it possible that Casper connect you scripts could be in conflict with the creation of models of the user?

  Solution: The question is a folder called Non_localized, reflect the English.lproj content with this file in template/User.

• When I click and drag a window to move its location on the screen does not move properly.

  When I click and drag a window to move its location on the screen does not move properly. It leaves a "track" of windows. Whatever the problem is scroll is also affected when the page moves in waves. Why he started to do this, and if someone can offer a solution? Thank you!

  original title: "leakage" of windows

  It is a common problem with how XP displays the items on your screen. When things get a bit bogged down, you'll start to see trails of the window as you drag. Unfortunately, there is no solution, but future versions of Windows do not have this problem with a new rendering of the graphics system.