Customization of the Portal helps ASA

Similar Questions

• Customization of the generated help files

  Hello
  
  I don't know if this issue is not within the competence of this forum or not, but I hope that someone can help you.
  
  I have a client who wishes to customize (i.e. add content) files delivered help (WebHelp) online, in order to do that they want me to send them the .hhp file. Is there another way they can do this? The .hhp isn't a standard delivered files, to the best of my knowledge.
  
  Thank you very much
  Elaine

  Hi Elaine

  Joined the party a little late here. I thought Adobe Community Expert Peter colleague had some information on its site to do this.

  Click here to see

  See if that does not process what you are wanting.

  See you soon... Rick

• Customization of SSL VPN Cisco ASA version 8

  Is there a way to customize the appearance of the SSL VPN? To change the features of the ASA custmization? To change the total look of the portal page the way we like it and not the Cisco default settings? For example, the RDP plugin has always display the help text on the right side, and we would like to show different text in this area. We were able to change it but could not import to the area of the asa.

  Import of SSL vpn customization ASA is not possible. Impossible also to change the appearance of the portal page.

• Web portal VPN asa - where is setup?

  Hello

  ASA 8.2.2, I set up web portal with bookmarks using ASDM. I wanted to check what looks like the CLI - and found nothing in the configuration. In the documentation I have CVCTVLY found:

  "Since the WebVPN customizations are not saved in the running configuration, a typical write erase, reload sequence does not erase the customizations or webcontents of the SAA. You must explicitly call back webvpn commands or manually remove the customizations of the ASDM. »

  Where is this configuration and how can I move it on other ASA using CLI?

  Thanx

  Hi, Webvpn bookmarks are stored in flash as models.

  You can see some information here:

  http://www.Cisco.com/en/us/docs/security/ASA/asa82/configuration/guide/WebVPN.html#wp1166489

  You can export these files using CLI by typing the command "export webvpn XX".

  If you enable the option to show the order before sending in ASDM, you will see just generate a file and then import it to the ASA.

  I guess you can use the 'more' command to show files that must be stored in flash.

• Customizing the portal of VMWare View 5 Page

  HELO all,.

  We test Vmware view 5 for an implementation of the medim scale possible. We have all the settings and it works fine. There is one thing that the sentence is me: the Portal Page. Normally, the portal page tells you that you must install the client and it redirects you to the Vmware View client download page. I managed to find documentation that tells you how to customize and I had to show him a few links that will download the client to our own server. I have attached a screenshot with where I am now (vmwareviewcurrentportal.jpg) right; What is the best... but watch some training videos, I noticed that, after the trainer install Vmware View connection to the Portal Services looks diferent (in a better way). I've attached screenshots of what its like (VmwareViewDesiredPortal.JPG) looks like w.

  Essentially: it has radio buttons in the software selection and a download button. After choosing your Customer Portal redirects you to a page (VmwareViewDesiredPortalInstructions.JPG) of the instructions.

  -I know that it is a kind of model because the images to help guide are stored in C:\Program VMware View\Server\broker\webapps\ROOT\portlets\client\images on the Vmware View connection server.

  The question is: how setup/activate this portal? Any help would be greatly apreciated.

  Thank you

  Adrian

  Fear not, we stayed at a compatible screen for all types of customers. I'm sorry.

• iPod Nano is not synchronize or send workouts on the portal of Nike

  I have an iPod Nano and up to a week or two ago when Nike changed their entire portal (which I am already Livid about because 'if it ain't broke, don't fix it") workout of my iPod Nano is no longer synchronize or send the portal of Nike + at all.

  I received continuous error messages and they have yet to fix.  However, they have not run before release products even if existing ones is glitching out.

  Any help would be appreciated, thanks.

  The web site Nike + was revised a few months ago.  I like the old better version also...

  Since the revision, when I sync my iPod nano and it has new workout data, I get an error message.  I my case, clicking the button OK in the error message allows the synchronization to continue, and iTunes sends my new workout data to Nike + (despite what the error of not being able to connect to Nike +).  I get the usual message of confirmation.

  In your case, Nike + receive your new workout data?

• Lost the back, front, refresh etc. buttons on the navigation bar. Everything on the fact help page and nothing works

  I have the navigation bar checked, restore the default toolbar, reset firefox, restarted with Add ons disabled, restarted the computer, restart firefox and update my plugins. Firefox is also updated. Nothing works. Thank you for your help and care.

  When you open the toolbar customization panel, the Stop/Reload point at the end of the address bar will be "magically" turn into buttons that can be dragged around. If you put them next to each other, they will be combined into a single button, but if you want them separate, I think you can, but a separation between them.

• Customization of the insertion in a custom user interface palette

  Greetings,

  I am working on a custom for Teststand application user interface and I want to give the user the ability to edit files in sequence using a simplified subset of the predefined types step.  I based user interface custom off the Labview FullOI example in the teststand 4.2 folder.

  I found the context menu item 'Customize' out of the palette of insertion and who seems to get most of what I'm looking for (hiding like IVI and synchronization of files and the individual steps as the FTP files and call executable), but what I really want to know, is if I can remove it to the different symbols of 'top' that choose between adapters.  I wish that the customer must only see Labview and none and RID where hide the CVI, C/C++ DLL, .NET and ActiveX.

  Where, moreover, are the options that you set in the menu customize stored user interface custom compared to the sequence editor own right?  I want to make sure that I have a good list of all of my modified files I create a CD of deployment of work later on the road.  I'm assuming that to change the visible categories in the interface custom user won't change their visibility in the application of the sequence editor.

  Personalization step insert palette changes affect the sequence editor and the user interface. The settings are stored in testexec.ini in the cfg directory.

  You can hide the adapters using the card configuration window in the config menu

  You can simply keep separate versions of your testexec.ini, one for when you want the customizations and the other for when you don't have, assuming that you do not use the machine even for both. If you use the same machine for both you can implement some sort of automated way of switching on which version of the file that you are using.

  Hope this helps,

  -Doug

• My Contacts from Windows Vista file has no control of import or export on the toolbar, and then I can not follow the Guide help to initiate the sequence of import. Does anyone know how to add the import function in the toolbar.

  Ideas:

  • Problems with the Contacts on Vista
  • No error message
  • Never used this feature before
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  The Contacts folder is sometimes forgotten how to display contacts, see if this helps:

  1. open Windows Contacts
  2. right-click anywhere in the right pane.
  3. Select "Properties" at the bottom of the list
  4. click on the tab 'Customize' on the 'Properties' page that opens.
  5. change the 'Type', 'Contacts' folder

  New Contact"and"Contact Group on new"button missing 
  
  HAL
  --
  HAL Hostetler, TCE
  Engineer senior/UPDATED--MS MVP-Print/Imaging - WA7BGX
  www.kvoa.com - KVOA television, Tucson, AZ.
  Live Hot Licks - www.badnewsbluesband.com

• New on the portal provider, digital goods. App update of doubt!

  Hi guys,.

  I'm new to the forum so please be kind if I am not aware of the rules here. I'm new to getting started with selling digital products from the supplier portal. I created a sample application using the AIR, like the BB dev portal. I've also added a new goods (consumable charge .99cents) in the portal provider (draft mode). I added the user sandbox to my account. I opened my Z10 account connected to BBworld with developer on mode. I'm in the content ID and looked content, the app mentioned that he is "not available for this device.

  I have some doubts.

  1. how to connect using the user account of bac to sand? Should I use a different device linked to the same BBID?

  2. why the content is "not available for this device?

  3. can I simulate purchases by using the 'PaymentSystem.CONNECTION_MODE_LOCAL '? I see the UI with the purchase ID and response on the 'success', but 'purchaseSuccessHandler' is not have triggered.

  My final question is,

  4. I'm planning store xml data and other assets in the appStorageDir once the user makes the purchase. Now, what happens if I update the application? The xml in the appStrorageDir file will also get deleted? How to maintain existing data when the user updates the application?

  Sorry for the long post amateur. Help is very appreciated.

  Thank you.

  1 see the following page for information on test applications with a user sandbox account.  You want to make sure that your digital good is approved / available, even if your version of the app is in draft mode.  Make sure to clear cache in BlackBerry World once you have downloaded your application on the portal of the seller.

  2. sometimes, this error occurs if you load the app (from your dev machine) side and try to buy a digital camera right.  The payment service requires that the application be downloaded from BlackBerry World in order to make digital good purchases.  If side you load it, you will get probably errors.

  3. I don't know why purchaseSuccessHandler will not fire.

  4. There is a shared folder on the device that you can place the application in legacy.  If the application is removed, the assets would persist.  You are right, that if you store your goods in the storage location of local file for your application, it will be deleted if a user deletes the app.

• Already registered on the portal OnPlus - cannot add a device already enabled/customer

  Hello

  I am registered on OnPlus.

  Then my colleague registered and activated a device.

  I could not activate the device - even if my PC is on the same subnet and can connect to it very well (with the password provided by my colleague).

  When he sends me an invitation for the device - it takes me to the registration page.

  If I get my information from record (again) - I get (not surprisingly)...

  "We had a problem with your submission. Please correct the following errors. This user ID is already registered. »

  Still-, there is no choice because "I am already registered.

  When I connect OnPlus and try to "Add Customer" - I put in the details, then it goes to the activation screen with

  "CustomerX / status".

  To activate this client:

  Install the Agent network OnPlus on the premises of the customer and connect it to the LAN client.

  Turn the Network Agent OnPlus the switch zipper on the back panel of the Network Agent OnPlus.

  If your computer is connected to the same network as the network OnPlus Agent, click on the button activate now below.

  Otherwise, follow the instructions for activation in the guide getting started for the Cisco OnPlus Network Agent.

  Activation for this customer information are:

  Activation ID:... »

  If I click on activate it says

  "Unable to determine a local IP address for all Agent OnPlus of network into your current network.

  Check that the Network Agent OnPlus is connected to the same local network as this browser. OnPlus Network Agent must be on the same public WAN IP address (203.25.x.x) in your web browser block current.

  Not enabled OnPlus network Agents will attempt to disseminate their IP up to 30 minutes and if successful will appear here for 4 hours. Try to stop power OnPlus Network Agent if it has been online for more than 30 minutes.

  Verify that the DHCP service is running on the local network so that network OnPlus Agent is able to acquire an IP via DHCP. You will be able to change Agent of the OnPlus network to use a static IP address if you choose to (recommended), but the DHCP service is required to access the Network Agent OnPlus start.

  Ensure that DHCP clients can route to the Internet.

  If the Network Agent OnPlus hosting site has multiple WAN paths to the Internet, try refreshing this page. Your browser must Access this page from the IP WAN as the Agent of OnPlus network address. »

  We even tried power cycling it, and I'm definitely on the same subnet.

  There was no possibility of entering an IP address no matter where manually - process regarding the "Impossible to determine an IP address local for all Agent OnPlus network on your current network."

  I ping the device and even connect to its graphical interface. It simply does not appear as any way to add this unit to my own account on the portal OnPlus.

  That please?

  Hello Brett.

  The On100 device can be associated with a single customer and a customer cannot exist in more than one Agent account. From your description, I understand that your colleague registered as a OnPlus Agent, created an account customer, and then active the On100 device under this new client.

  However, it is possible for you to have access to the customer site by becoming a sub-agent under account OnPlus Agent of your colleague.  And according to the description above, it seems that your colleague has already sent you an invitation to become a subagent.  The problem now is that you have previously registered your EAC as OnPlus Agent id.  It is not possible for a single CCE id or an Agent and a secondary agent in the OnPlus portal.

  To allow your registration as sub-agent, we remove your EAC to your portal id.  It is a manual step that I am happy to help you.  Simply unicast your Agent account information to [email protected] / * / .  Once I take off your CEC id you will be OK to complete the registration of subagent.

  Here's some more information about the creation of the sub-agents in the portal OnPlus.  A previous post jamwyatt courtesy of response:

  In the account that contains the Agent network ON100, you can add other agents, on invitation. On the overview page, there is a menu agent at the top that will allow you to invite the officers. Once you invite an agent, and they sign up, they will be able to see the same view you see. The design intent is that you set up a master account for your business, then you invite other employees and contractors to adhere as agents of this account. Each guest will need a Cisco ID and once that they sign up, they will have to be approved by the owner of the main account (same menu agent, selection "of Agents in waiting"). Using this approach, the owner of the company retains the main account and allows you to manage completely all agents.

  Kind regards

  -r.

• The upgrade of ASA 5520

  Has just received a new ASA 5520 and I'm trying to update the ASA s/w to 7.2 and the ASDM to 5.2. I copied the Flash files, but when I run "asdm image flash: / asdm521.bin ' I get an error that it is not an image file and I don't know where to start with the ASA. Any help would be appreciated. I can't find any info in my documentation.

  Try this,

  To update/install the ASDM follow the example of the procedure,

  ASA (config) # copy tftp flash

  Address or name of remote host [xxxx]?

  Source [pix704.bin] file name? ASDM - 504.bin

  Destination file name [asdm - 504.bin]?

  Access t... ftp://x.x.x.x/asdm-504.bin!

  !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

  Writing flash file: / asdm - 504.bin...

  !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

  !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

  5958324 bytes copied in 165,460 seconds (36111 bytes/s)

  ASA (config) #.

  ASA (config) # sh flash

  Directory of flash: /.

  7 rw-5437440 21:12:42 pix704.bin 24 November 2005

  5919340 - rw - 11 20:59:06 November 24, 2005 asdm - 504.bin

  -7017 rw-13 14:00:58 22 July 2005 admin.cfg

  ASDM - 504.bin is now copied into the flash. We should now set to use PIX

  This image to load ASDM.

  ASA (config) # asdm image flash: / asdm - 504.bin

  Final steps involve configuration running record in memory as we

  changes to boot files and reload the PIX.

  ASA (config) # write memory

  Building configuration...

  Cryptochecksum: d4f498de e877e418 2f9effa7 62ca0d6b

  4807 bytes copied in 3.20 seconds (1602 bytes/s)

  [OK]

  ASA (config) # reload

  Once the PIX comes back to the top, we can check that upgradation succeeded

  using the command 'show version '.

  Consult the ASDM upgrade procedure

  http://www.Cisco.com/en/us/customer/products/HW/vpndevc/ps2030/products_tech_note09186a00804708d8.shtml#T8

  I hope this helps... all the best... the rate of responses if deemed useful...

  REDA

• Migration of the customization of the form from one instance to another

  Dear all,

  I have a requirement to form customization in the form of orders. Form problems have already 99 customizations. After entering my new customization, I downloaded the ldt with the following commands:

  FNDLOAD apps / $ Y DOWNLOAD password 0 $FND_TOP/patch/115/import/affrmcus.lct XX_OEXOEORD.ldt FND_FORM_CUSTOM_RULES form_name = OEXOEORD

  I saw all the customizations are downloaed in the ldt, but when I try to download on another instance, it downloads only 5 / 100 customization. Download the command is:

  FNDLOAD apps / $password 0 DOWNLOAD $FND_TOP/patch/115/import/affrmcus.lct XX_OEXOEORD.ldt - WARNING = YES UPLOAD_MODE = REPLACE CUSTOM_MODE = FORCE

  Some random sequences (such as 9, 40, 80, 99 and 100) got downloaded.

  I found an old thread associated with the same question:

  Migration of the customization of the form of DEV TEST

  We have applied this hotfix and checked that patch versions are up-to-date, but always after re - download issue persisted.

  Thanks for your time to consider cela and really appreciate your help.

  Thank you.

  We have applied this hotfix and checked that patch versions are up-to-date, but always after re - download issue persisted.

  In addition the patch that you already applied (Patch 9446215 ) Please make sure you have (Patch 9975835) mentioned in (FNDLOAD download does not download all the forms customization (Doc ID 1340217.1)) applied.

  Thank you

  Hussein

• How can I make a tab by default whenever I have connection to the portal of the webcenter spaces?

  Hello

  I have a single page in the portal of webcenter spaces, which is the default portal in the webcenter application. This single page has 6 or 7 like Home tab and the other tabs. Whenever I logged in the webcenter I can see the url redirects to my default portal but it doesnot get home tab made, instead, it shows the tab where I left just before disconnected tab.

  For example I have tabs A, B, C, D etc... I have logged in to the application portal and I did something in tab C and then I logged. After once again I re-login, I see this tab C shows, but I want to see that tab must be returned. Someone help me how to make a tab by default whenever I have connection to the webcenter portal.

  Thank you

  Ashok Laura.

  Hello

  This is an expected behavior as his persists the State of users. I did face this problem before and solved by setting the disclosed condition of showditailitem programmatically.

  Please check below the code for your reference.   Invoke the bean managed prior to the loading of the page to

  {} public void onPageLoad (PhaseEvent phaseEvent)

  If (phaseEvent.getPhaseId () .equals (phaseEvent.getPhaseId (). RENDER_RESPONSE)) {}

  If (!.) {AdfFacesContext.getCurrentInstance () .isPostback ())}

  If (this.newsPanelTab! = null) {}

  List childUIComponent = this.newsPanelTab.getChildren ();

  If (childUIComponent! = null & childUIComponent.size () > 0) {}

  for (int i = 0; i)< childuicomponent.size();="" i++)="">

  If (childUIComponent.get (i) instanceof RichShowDetailItem) {}

  If (i == 0) {}

  ((RichShowDetailItem) childUIComponent.get (i)) .setDisclosed (true);

  } else {}

  ((RichShowDetailItem) childUIComponent.get (i)) .setDisclosed (false);

  }

  }

  }

  }

  Thank you
  Amey

• Pages system is empty in the portal

  Using webcenter Portal 11.1.1.8.0.

  Trying to change my login page, am by following the link below to do so.

  http://matteoformica.blogspot.de/2015/10/how-to-customize-login-page-in.html

  My system page shows empty.

  Someone kindly guide me how to change the login page.

  Hello Prasad,

  Please check below for reference.

  https://docs.Oracle.com/CD/E29542_01/WebCenter.1111/e27738/wcadm_ps_syspages.htm#WCADM11276

  Its looks like you connect with weblogic which is by default for defaultauthenticator.

  Do you use the MobiLink external authenticator? If yes add user to the external directory and then add specific user of the external directory as administrator for portal

  https://docs.Oracle.com/CD/E29542_01/WebCenter.1111/e27738/wcadm_ps_security.htm#WCADM11568

  Also please update Diagnostics logs when access you the portal application system pages.

  Thank you

  Amey