Customize the login scripts
I have a PHP/MySQL login custom script that sends users to an error page if things go wrong with the server.Ideally, I would like to change the configuration of Dreamweaver CS3 files, so it's the connection by default whenever I set up a site connection. I can't locate the file/s that create/s login script code and so everyone can someone point me in the right direction would be great!
Thank you
Julie
juli_s wrote:
> I'm having
> trouble to locate the file/s what s/create connection script code and if
> anyone no matter who can point me in the right direction would be great!
On Windows, this is C:\Program Files\Adobe\Adobe Dreamweaver
CS3\configuration\Connections\PHP_MySQL\connection_includefile. EDML
--
Adobe Community Expert David Powers
Author, "The Essential Guide to Dreamweaver CS3" (friends of ED)
Author, "PHP Solutions" (friends of ED)
http://foundationphp.com/
Tags: Dreamweaver
Similar Questions
-
802. 1 x with the login script
Hello
Before you set the 802. 1 x with ISE. Logon user with a script to map the network drive.
We deployed the 802. 1 x with ip phone and your PC successfully, but the logon script does not work now.
Whatever measures are necessary to make the login script work?
ISE:2.1
switch: 3750 with 12.2 (55) SE10
PC:Win7 (to connect to the ip phone)
IP phone: 6921 (connect to switch f 1/0/4)
Switch configuration is to see more:
!
version 12.2
no service button
tcp KeepAlive-component snap-in service
a tcp-KeepAlive-quick service
horodateurs service debug datetime localtime show-timezone msec
Log service timestamps datetime localtime show-timezone msec
no password encryption service
Service linenumber
sequence numbers service
!
hostname ISESW01
!
boot-start-marker
boot-end-marker
!
enable password 7 xxxxxxxxxxxxxxxxxxxxxx
!
username password 7 xxxxxxxxxxxxxxxxxxxx xxxxxxxxxxx
!
!
AAA new-model
!
!
RADIUS AAA server group ISE
auth-port 1645 10.202.152.91 Server acct-port 1646
auth-port 1645 10.202.152.92 Server acct-port 1646
!
default AAA dot1x ISE authentication group
AAA authorization network default group ISE
AAA authorization auth-proxy default group ISE
accounting AAA periodic update 5
accounting dot1x default start-stop group AAA ISE
AAA accounting system by default start-stop group ISE
!
!
AAA server RADIUS Dynamics-author
customer 10.202.152.91
customer 10.202.152.92
!
AAA - the id of the joint session
switch 1 supply ws-c3750v2-48ps
mtu 1500 routing system
VTP transparent mode
DHCP excluded-address IP 10.202.21.1 10.202.21.10
DHCP excluded-address IP 10.202.121.196
!
IP dhcp pool testingdhcp
Network 10.202.19.0 255.255.255.0
router by default - 10.202.19.1
10.202.152.21 DNS server
!
!
analysis of IP device
!
MLS qos map policed dscp 0 10 18 24 46-8
MLS qos map cos-dscp 0 8 16 24 32 46 48 56
MLS qos srr-queue input bandwidth 70 30
MLS 1 80 90 qos srr-queue input threshold
priority-queue input bandwidth 2 30 MLS qos srr-queue
queue threshold 1 MLS qos srr-queue input cos-map 2 3
queue threshold 1 MLS qos srr-queue input cos-map 3 6 7
queue threshold 2 MLS qos srr-queue input cos-map 1 4
queue threshold 1 MLS qos srr-queue input dscp-map 2 24
queue threshold 1 MLS qos srr-queue input dscp-map 3 48 49 50 51 52 53 54 55
queue threshold 1 MLS qos srr-queue input dscp-map 3 56 57 58 59 60 61 62 63
queue threshold 2 MLS qos srr-queue input dscp-map 3 32 33 40 41 42 43 44 45
-More - mls qos srr-queue input dscp-map 2 3 46 47 threshold queue
queue threshold cos 1-map of MLS qos srr-queue output 3 4 5
queue threshold cos 2-map of MLS qos srr-queue output 1 2
queue threshold 2 cos-MLS qos srr-queue output 2 3 card
queue threshold cos 2-map of MLS qos srr-queue output 3 6 7
queue threshold cos 3-map of MLS qos srr-queue output 3 0
queue threshold 4 cos-MLS qos srr-queue output 3 1 card
queue threshold 1 dscp-map of MLS qos srr-queue output 3 32 33 40 41 42 43 44 45
queue threshold 1 dscp-map of MLS qos srr-queue output 3 46 47
queue threshold 2 dscp-map of MLS qos srr-queue output 1 16 17 18 19 20 21 22 23
queue threshold 2 dscp-map of MLS qos srr-queue output 1 26 27 28 29 30 31 34 35
queue threshold 2 dscp-map of MLS qos srr-queue output 1 36 37 38 39
queue threshold 2 dscp-map of MLS qos srr-queue output 2 24
queue threshold 2 dscp-map of MLS qos srr-queue output 3 48 49 50 51 52 53 54 55
queue threshold 2 dscp-map of MLS qos srr-queue output 3 56 57 58 59 60 61 62 63
queue threshold 3 dscp-map of MLS qos srr-queue output 3 0 1 2 3 4 5 6 7
queue threshold 4 dscp-map of MLS qos srr-queue output 1 8 9 11 13 15
queue threshold 4 dscp-map of MLS qos srr-queue output 2 10 12 14
MLS qos all the output queue 1 1 100 100 50 200 threshold
MLS qos queue of output 1 all threshold 2 125 125 100 400
MLS qos queue of output 1 all threshold 3 100 100 100 400
MLS qos queue of output 1 all 4 60 150 50 200 threshold
MLS qos all the output queue 1 15 25 40 20 buffers
MLS qos
!
Crypto pki trustpoint TP-self-signed-1210376576
enrollment selfsigned
name of the object cn = IOS - Self - signed - certificate - 1210376576
revocation checking no
rsakeypair TP-self-signed-1210376576
!
!
TP-self-signed-1210376576 crypto pki certificate chain
certificate self-signed 01
xxxxxxxxx
quit smoking
Auto qos srnd4
control-dot1x system-auth
dot1x critical eapol
!
!
!
!
pvst spanning-tree mode
spanning tree extend id-system
VLAN spanning tree priority 819 61440
!
internal allocation policy of VLAN ascendant
!
VLAN 121
name Voice_Vlan
!
VLAN 819
name 19F_VLAN
!
VLAN 888 899
!
!
class-map correspondence AUTOQOS_VOIP_DATA_CLASS
match ip dscp ef
class-map correspondence AUTOQOS_DEFAULT_CLASS
match the name of access by DEFAULT ACL-AUTOQOS group
class-map correspondence AUTOQOS_VOIP_SIGNAL_CLASS
match ip dscp cs3
class-map correspondence AutoQoS-VoIP-RTP-Trust
match ip dscp ef
class-map correspondence AutoQoS-VoIP-control-Trust
match ip dscp cs3 af31
!
!
Policy-map AUTOQOS-SRND4-CISCOPHONE-POLICY
class AUTOQOS_VOIP_DATA_CLASS
DSCP ef Set
128000 8000 exceed-action of the police controlled-dscp-transmit
class AUTOQOS_VOIP_SIGNAL_CLASS
DSCP Set cs3
32000 8000 exceed-action of the police controlled-dscp-transmit
class AUTOQOS_DEFAULT_CLASS
Set default dscp
10000000 8000 exceed-action of the police controlled-dscp-transmit
Policy-map AutoQoS-Police-CiscoPhone
class AutoQoS-VoIP-RTP-Trust
DSCP ef Set
320000 8000 exceed-action of the police controlled-dscp-transmit
class AutoQoS-VoIP-control-Trust
DSCP Set cs3
32000 8000 exceed-action of the police controlled-dscp-transmit
!
!
!
!interface FastEthernet1/0/4
switchport access vlan 819
switchport mode access
switchport voice vlan 121
authentication event fail following action method
action of death event authentication server allow voice
no response from the authentication event action allow vlan 889
living action of the server reset the authentication event
multi-domain of host-mode authentication
authentication order dot1x mab
authentication priority dot1x
Auto control of the port of authentication
MAB
added mac-SNMP trap notification change
deleted mac-SNMP trap notification change
dot1x EAP authenticator
dot1x tx-time 10
spanning tree portfast
!!
interface Vlan1
no ip address
!
interface Vlan819
IP 10.202.19.11 255.255.255.0
!
default IP gateway - 10.202.19.1
IP classless
IP http server
IP http secure server
!
!
IP access-list extended by DEFAULT ACL-AUTOQOS
allow an ip
IP access-list extended redirection
deny udp any eq bootpc any eq bootps
deny udp any any eq bootps
deny udp any any eq field
deny ip any host 10.202.154.192
allow an ip
!
!
SNMP - server RO Cisco123 community
RADIUS attribute 6 sur-pour-login-auth server
Server RADIUS attribute 8 include-in-access-req
RADIUS attribute 25-application access server include
dead-criteria 30 tent 3 times RADIUS server
RADIUS-server host 10.202.152.91 auth-port 1645 acct-port 1646 borders 7 xxxxxxxxxxxxxxxxxxxxxxxx
RADIUS-server host 10.202.152.92 auth-port 1645 acct-port 1646 borders 7 xxxxxxxxxxxxxxxxxxxxxxx
RADIUS vsa server send accounting
RADIUS vsa server send authenticationI had a similar problem the workstations where the value "of the computer or user authentication" in the PEAP protocol settings. What is happening is that list DACL that served as of when the computer account has been authenticated restricted just DCs etc, but don't understand the locations required for the login script. It seems that Windows 7 user logon script runs before the dot1x presents the user credentials to the switch.
Thus, in our case, we have modified the DACL is in place for the computer account to allow access to the locations required for the login script (i.e. the network sharing servers), and everything works.
-
Is it possible to customize the login page customer web email?
Is it possible to customize the login page customer web email? It would be wonderful to be able to offer my clients a personalized and wonderful connection Web page.
Thans in advance!
Diego
Hi, no you can't.
This is a 3rd third party vendor offering.
-
I would like to customize the login screen of LCM with my logo and modify the borders of default blue of another color. How can I do this?
I also want to change the blue border by default in the main window after you connect also. I worked on how to do this with custom CSS, but I don't see where, on the file system, I can download my images customized for after their SEO in CSS
Once again with something 'not so easy' do or describe...
Open your vCenter Orchestrator Client and connect with admin rights
Select Webviews in the left pane
Select VMware Lifecycle Manager - right click and choose not to publish
Click the items tab in the right pane (it will take a while to load up)
Click on the "Export to link directory.
When you are prompted, export to a folder named c:\lifecycle (just keep simple here... you will first need to create the folder)
Then, copy your logo to c:\lifecycle\images file
Then, edit the file c:\lifecycle\css\login.css
You need to add the following lines: (replace
with the HEX color appropriate code that you want to use. For example, RED is FF0000. Also, replace YOURLOGO.jpg with your file name real logo that you copied in the pictures folder.)
/ * Insert these lines at the bottom of your login.css file * /.
/ * Change the upper part of the box color * /.
body.loginPage #sectionHeader
/ * Change the colors of line left/right and add the logo * /.
body.loginPage #main
/ * Change the color of the box background * /.
body.loginPage #footer
/ * End of the login.css changes * /.
Now, he must submit these changes to your LCM server:
Return to your vCenter Orchestrator Client (either still on the same screen as the directory link to earlier export)
Click the "import directory.
Specify "C:\lifecycle" as the file name and click Import
At the confirmation prompt, click Import
At the bottom of the window, click on save and close
Now publish the webview (green play in the toolbar button OR click with the right button on the Web view and select publish)
If everything was done correctly, you should see something a little more customized in appearance when you visit http://yourLCMServer:8280/vmo/lifecycle and invited for the connection.
Visit me on http://www.vcoteam.info for vCenter Orchestrator tips and tutorials
-
Problems with the login script after implementing URL rewriting
My site is in full based on a single index page, in which there is always an area 'connect' to the left if no user is currently logged on.
To my user pages, I use a PHP script to rewrite the URL "mydomain.com/index.php?page=user & id = 123' to"mydomain.com/username".
After the implementation of the script rewrite, I can no longer connect while on a user page. It seems to process the script of connection very well, considering that it redirects to the page on the right, but for some reason that session variables are not defined.
Any help with this would be much appreciated, and I would be happy to provide more details if necessary. Thanks in advance.Finally, I solved the problem using rewrite in htaccess instead of the 404.
-
.dat or .msi in the ThinReg login script?
When I create a ThinApp, I create an msi file, and sometimes ThinApp creates the .dat rather than the .exe file. I'm a bit puzzled as what to put in my login script that works ThinReg. Can I put \\server\path\xxx.dat or \\server\path\xxx.msi? Or is it important? Thank you.
You use the exe (No .dat or msi) for ThinReg.
The MSI file will contain ThinReg itself and that's why he recorded the ThinApp (ThinReg) when the MSI is installed.
Please see this post on the use of login script ThinReg:
http://blogs.VMware.com/ThinApp/2008/10/ThinApp-thinreg.html
-
I find more and more important to be able to see the actual email address of the sender rather than just displaying the name, because they do not usually show a company name - a domain would always be. Is it possible to customize the settings/write a file of script/tweak to add columns of name email & domain raw? When dealing with a number of people from the same company, it is difficult to order or nod thanks to a list of emails to find. I know also that 2 people with the same name to different companies and it is impossible to distinguish.
Secondly, as an addition of associated column, since a number of e-mail aliases join it would be useful to have a column to display the "received for" part of the source of the message that reveals the real enamel used in the To/CC/BCC, which led to me. Once again can it be twisted or scripted?
I have programming experience but did not Add ons, and would be open to a proposal which is to create a custom module if adding columns with custom values is possible like this.
Best regards
Drew
This module help you?
https://addons.Mozilla.org/en-us/Thunderbird/addon/show-address-only/
-
UAC prompted on the login screen
Hi all
I've seen several posts on the user invited on the login screen. There are also several suggestions how to get rid of the account, so far I had no chance to delete the account of user invited to my login screen.
I bought a brand new MBP and migrated all of my old Mac Mini to the new MBP. The guest user account was NOT visible on the Mac Mini.
Here's what I've tried so far:
- Checked 'Find my Mac' is NOT enabled
- Guest user account is set to 'Off' under users and groups
- A ran a script that I found in an older post in the Terminal
None of the things above removed the user invited to my login screen.
It's all solid fix how to get rid of the guest user?
Thank you!!
You said "guest user account is set to off in users and groups.
Do you mean that the guest user account is always accessible in the ordinary journal?
Also-
When you are in users and groups - you by clicking on the lock - and enter your password to make changes?
If so - you should be able to simply remove the account of guys using the sign minus (-) sign at the bottom of the box
-
Mac Labs: ARD login script not working only off 10.11
I run the laboratory of computer science at the State University. 5 laboratories w / 100 + machines. We have been a Mac shop all since switching to Intel chips.
I use the following login for the years script:
name = "user";
password = "pword";
osascript<>
Tell application "system events".
hit tab
strike (character ASCII 8)
hit tab
strike (character ASCII 8)
strike back
delay 0.5
hit tab
combination of keys '$name '.
hit tab
delay 0.5
combination of keys '$password '.
delay 0.5
strike back
strike back
tell the end
EXPRESSIONS OF FOLKLORE
When I send to a machine (with and without SIP) 10.11, I get the following message is displayed in the status field of the task:
osascript [261:2199] CFPasteboardRef CFPasteboardCreate (CFAllocatorRef, CFStringRef): failed to create aggregate data
I don't know if the problem lies with ARD admin being 3.8 and 10.11 being 3.8.5 client. I had similar problems with disparity admin/customer a while back who disappeared when ARD admin has been updated.
Not being able to connect on my machines 100 + is a deal breaker. I can't deploy 10.11 nor I can recommend that we buy new machines this year (we replace generally 1/3 each year).
Someone at - it a script that works in 10.11?
Hi, solves this problem already? I would be interested in the solution because I have the same problem with my El Cap clients...
Thanks in advance for your help.
-
How to customize the DIAdem report export function Menu PowerPoint?
H all,.
I can define another "Power Point of export" script to run when you select the menu if "Diadem report' drop-down"Export PowerPoint"a file?
I know that this menu using the template file to "C:\Program Files (x 86) \National 2012\Resource\PowerPointTemplate.ppt. My problem is that I cannot 'customize' the PPT template enough to get some items to position correctly on the slides.
What I did change the script "C:\Program Files (x 86) \National 2012\Examples\Documents\REPORT_Layout_to_PowerPoint.VBS" with the changes I need, set the model to use ppt. Run the script, and it works as it should. (This script is not related to the pull down menu function - I maybe something set wrong somewhere).
I want to get out of having to open this script whenever I want to create a ppt. I'd rather select the menu drop-down. Do the traction to the low 'export PowerPoint' use a defined script?
Thank you
John
Hi John,.
If you are using DIAdem before 2015, you old syntax to change the menu. Here is an example:
Dim strPanel, strMyMenu, intCount
strPanel = 'REPORT '.
strMyMenu = "list of menus in DIAdem ' & strPanel & «:»»»
Call WndOpen (strPanel)
Call MenuItemCountGet (strPanel, "M1")
IntCount = 1 to MenuItemCount
Call MenuItemInfoGet (strPanel, "" M1. "") & intCount)
strMyMenu = strMyMenu & + "\n" & MenuItemTitle & "-" & intCount
Next
Call MsgBoxDisp (strMyMenu)strMyMenu = «»
Call MenuItemInfoGet (strPanel, "M.1.14")
strMyMenu = "pos. 14: '& MenuItemTitle '.
Call MsgBoxDisp (strMyMenu)Call MenuItemChange ("REPORT", "M.1.14", "My PPT", "call Msgbox (""Hello" "\" "")
Greetings
Walter
-
How to keep the monitor back to the login screen?
HP Touchsmart 610 with Windows 7: when you watch a movie, how can I stop the screen to return to the login screen every few minutes?
Hello michin
Welcome to HP forum. Wow this is not supposed to happen. Lets start with the sleep mode setting initially. Left click your mouse anywhere on your screen. GoTo customize until it clicks. Click on the screensaver icon. Change the time waiting more than 20 minutes. And just below, click on change power settings. The next window under Select a power plan select high performance. On the left side, click on choose when turn off display. The next window set the parameters like this:
Brightness 10 minutes click on the upside of triangle for this.
Turn off the display of 15 minutes
Put the computer to sleep forever
Brightest ordinary Move-wing Maximum adjustment slider. You can still use the keys of the inverter later.
Click on save changes. Now close all open windows. Finish.
Now, please understand why your it support is now close. Lets try to run a pc tune up and that we will run disck and Disk Defragmenter clean and see if that solves the problem of media. Open HP Support Assistant. Click on maintain. Click Tune up. The next window click on display settings. The next window click on click here to display (bar)...
A landmark show in all the boxes display apply checkbox and then click OK. The next window click Tune up now.
After that it's over it close. Now goto accessories and then click System Tools, click on Disk Defragmenter click analysis drive then when he finished click or defragment a disk. When you have finished near it.
Now go back and open Disk Cleanup. Click Ok and follow the instructions. I hope this will fix the problem. If this isn't the case, then you must tell what program you were using for we can help you to reinstall again.
-
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
When you install Windows Vista, I accidentally jumped on the color/design change to the login screen where I have to type my password to access my office and other files.
How to retrieve and change the color/design of my Windows Vista login screen?
http://www.howtogeek.com/HOWTO/Windows-Vista/customize-your-Windows-Vista-logon-screen/
Read the information on the above link to what you want to do.
See you soon. Mick Murphy - Microsoft partner
-
Login script JSON jqm to need help bbui
Hello
A few months ago, I tried to start with bbui get more native objects (like swipe in the menu drop-down).
The problem is that bbui sucks compared to jqm (kitchensink) my complete app depends on, and the part I am now is connection and registration of a new user of the application.
This is example code that I use a lot:
Example of form
[code]
[/ code]
Example of jQuery:
[code]
$(function() {})
$("#JqAjaxForm").submit (function (e) {}var b is return ["JqAjaxForm"] ["email"] .value;.
var c is return ["JqAjaxForm"] ["password"] .value;.dataString = $("#JqAjaxForm").serialize ();
$.ajax({)
type: 'POST',
URL: ""http://myserver.com/login.php ", "
data : dataString,.
data type: 'json ',.
success: function (data)
{If (data.usrkey == "undefined") {alert ("user/password incorrect");
} Else if (data.usrkey == "null") {alert ("user/password incorrect");
} Else if (data.usrkey == '0') {alert ("user/password incorrect");
} Else if (data.banned == '1') {alert ("user/password incorrect");
}
on the other
{USRID = data.usrid;
usrid var = data.usrid;
localStorage.setItem ('userd', usrid);
Window.Location.assign ("Start.html");
}
}
});
});
});[/ code]
what the code, if the json in login.php data is 0 or undefined, it means that your user/pass is incorrect.
When usr.banned is 1, it means you did something wrong and you're banned from the app
Otherwise, it will return your username and which will always be greater than 0 then you will get a localstorage (aka connected).
This code does exactly what is should do... in jquery.
I tried to mix different versions of jquery and jquery mobile with bbui but it has messed up every little thing.
And this json/ajax request made in this case only connect, but I use it a lot more.
As example for user information, submit information, check if you have access to the parties (0/1).
In any case to long a little more short, jquery does not set well with bbui.
I am locked out of my application and cannot save a new user because it uses jquery to submit.
Someone at - it a good example of the above code that does exactly the same thing?
but works in bbui, OR a jquery lib (mobile) I can use with bbui
Small update on my side, when I use the zepto (http://zeptojs.com/) plugin, I get the below error:
ReferenceError: Can't find variable: webworks
This error I get also when I include any javascript jquery or jqm file
I forgot to mention, indeed, that I already have those around him.
my login script works now, jquery 1.9 x was the problem, no problems with 1.8.x
-
Hello:
I have a N7K which has strange behavior for me
When I connect to the console once the welcome a message command is executed
In my case is "terminal color:
User access audit
N7K1 login: admin
Password:
Operating system (NX - OS) Cisco Nexus software
TAC support: http://www.cisco.com/tac
Copyright (c) 2002-2012, Cisco Systems, Inc. All rights reserved.
The copyright in certain works contained in this software are
owned by others and used and distributed under
license. Some components of this software are licensed
the GNU Public License (GPL) version 2.0 or GNU
Lesser General Public License (LGPL) Version 2.1. A copy of each
This license is available at
http://www.opensource.org/licenses/GPL-2.0.php and
http://www.opensource.org/licenses/LGPL-2.1.php
"terminal color."
N7K1 #.
I do not see this command in the running configuration
The question is where is - this command?
I get a default script and I found there is a called Phyton scripting language that allows you to write scripts to fancy
But I did not thing is tha case because the bootflash:scripts folder is empty
Clues?
Thanks in advance
Al
Hi Al,.
Take a look at the bootflash and check if you have a file called. RC.CLI. this file is added when you run the terminal color persists and are then executed every time that connects to the switch.
If the file exists, delete it and the terminal color command must be executed when a user connects.
Concerning
-
Running the logon script after AnyConnect VPN connection
Is it possible (such as the Launcher on the IPSec client) to run a login script after establishing a VPN connection? When a user connects to the VPN client AnyConnect I need to be able run a login script to map drives. I looked the ASDM, but see anywhere that it seems that this would be configured. I thought I would check to make sure I'm not missing something.
We lack ASA IOS v8.2 (2), ASDM 6.2 (5).
Thank you.
You can learn more about the AnyConnect script capabilities on the link below...
Maybe you are looking for
-
Podcast Connect is showing the State of my podcast as "Deleted", I can't find any reason or what to do next? My podcast was to last one year and I checked all of a sudden it's show "Deleted" State Thank you
-
Acer Aspire E1 - 571g bluescreen
Hey guys, I've been do bluescreen lately playing games like Marvel Heroes, Age of Empires 3, etc... What happens exactly, it is that the game freezes and I get a message saying "nvidia kernel mode has stopped working and has been recovered" after a f
-
Can't same Fax with this piece of _! MS has better wake up and quit trying to screw us! Save your money and buy a MAC!
-
Hello Sorry if this has been asked and answered, but quick search did not return significant results. Documentation says "the working directory is where the application is started and is also known as the 'Active Directory' and the 'sandbox'. Then we
-
I bought a new WIN 7 laptop, not my Internet browsers work with my wifi connection at home (just Skype works), but works with other public wifi connections. My home wifi connection works very well with other laptops, cell phones, at home and with my