Cannot fax Vista sucks!

Similar Questions

• After installing Avast AV my computer cannot load Vista. HE continues to go to the Startup Repair, and it gives me an error of windows registry.

  ORIGINAL TITLE: Vista problems

  Hi I was wondering if I can get a few hekp with this question. After installing Avast AV my computer cannot load Vista. HE continues to go to the Startup Repair, and it gives me an error of windows registry. I idid a debbug and had no errors on the disc. Safe mode does not work. I tried restore to earlier date and nothing, went to the command prompt and type chkdsk /F. c: here's what I got the chkdsk cannot run because the volume is in use by another process. CHKDSK may run if this volume is dismounted first. ALL OPEN GERE to this VOLUME WOULD then BE INVALID. And then he asks me if I want to force a disassembly. Press o and had. Windows check the file system and found no problem. The last line says failure to transfer the messages saved in the log of the events with the 50 State. It's all I have.

  Hello

  What is the exact error message related to the windows registry?

  I suggest you follow the steps mentioned below:

  Method 1:

  Remove all external factors with the exception of the keyboard and mouse.and restart the computer and check if the problem occurs.

  Method 2:

  Restart the computer in last known good configuration (LKGC) and check if the problem persists. Follow the steps in the link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/using-last-known-good-configuration

  Method 3:

  If the previous step fails, follow the steps in the link:

  http://support.Microsoft.com/kb/927391

• Cannot install vista SP2. Go back to step 3 of 3 error E_FAIL (0x80004005)"?

  original title: cannot install vista SP2. Resets the return on step 3 of 3.

  I tried to install SP2 for vista, it fails. automatic update failed he proceeds to step 3 of 3 and go back. I tried the manual download, that there is too much. He is gone to step 3 3 100% and then looked back. has given an E_FAIL (0x80004005) error code please help because I can not install msn live messenger without SP2.  I have Service Pack 1 installed.

  IAM running windows Vista 32 bit, home premium.

  Try these institutions.

  http://support.Microsoft.com/kb/971204/

  http://support.Microsoft.com/kb/313222

  Go to control panel-> Windows Update control, click "Edit settings", then select "Allow all users to install updates on this computer" and click OK. Restart, then install SP2.

• Cannot install Vista OEM after replacement of equipment

  My Dell with Vista system crashed. The motherboard and HARD drive were fried... I have a system that is compatible with Vista and I installed, but cannot activate Vista, with the same vista that was on my dell... How can I get the vista high and active... The system has set for about 6 months.

  It is not possible to activate it.

  "As far as I know it is not OEM".

  Not sure EXACTLY what kind of license it is.

  "About 3 months after using the HARD drive and motherboard fried."

  You cannot use programs to find the key to the race and active system.

  "and the Vista disc has no number on the handle or the case...." »

  You don't have a product key.

  We cannot help you.

  See you soon.

  Mick Murphy - Microsoft partner

• Fax vista cable machine

  I have a vista computer that is 'new' I have the machine with other connected via Ethernet 802.3 to the modem cable to the head of cox. I want to send and receive faxes, but may not know how config and monitor application.

  A "cable modem" is not the same thing as a "fax modem" and cannot be used to send faxes.  You need either a real fax-modem and a telephone line or Internet service that sends faxes for you, in order to fax your current configuration.

  "bozo1" wrote in the new message: * e-mail address is removed from the privacy... *

  I have a vista computer that is 'new' I have the machine with other connected via Ethernet 802.3 to the modem cable to the head of cox. I want to send and receive faxes, but may not know how config and monitor application.

• Cannot install Vista Business on Portege M400 - IDE issues

  Hi guys... I am looking for your help.

  I downloaded all the new Vista drivers avaiable from Toshiba in support of the new installation of Vista business on my old Portege M400, that came preloaded with a version of XP Tablet and kept their loan on a CD.

  I also upgraded the version of the ACPI BIOS to the latest available 3.80.

  I insert the first CD of Vista professional and do a boot. (I also have a n upgrade Vista Business CD but I want to do a clean install).
  I go past the first steps and choose Install.
  I am faced with an error message "no disk has been found. "Click on load a driver to provide a device for installing mass storage.

  Looks like Vista is not able to see the IDE drive to the edge and it's a driver problem.

  I touched the "Rescan" button available on the windows installation and another message appears: "no device drivers were found. Make sure that the installation media contains the correct driver, and then click OK. »

  Currently loaded on the XP: currently loaded poster IDE ATA/ATAPI controllers like Device Manager: "Intel (R) 82801 G (ICH7 Family) Ultra ATA Storage Controllers and primary IDE channel."

  Hard drives shown are: Toshiba RAID SCSI Disk Device LD0

  Pls tell, what new drivers since available downloads of drivers Vista for my model 400 ML PPM40E, should I choose here for my Vista installation recognizes the disk available?

  Hello

  It is very easy to solve this problem.
  If you would look on the page of the European driver Toshiba (Portege M400 section), then you will notice that a RAID driver is available for this model of laptop.

  Impossible to install Vista because it cannot find the HARD drive due to lack of RAID driver!

  You must install the RAID driver first and then you can proceed with the installation of Vista.
  As far as I know the Vista installation accepting the USB flash key you can use this key to include the RAID driver.

  Hope I could give some useful advice.

  Cheers mate

• Portege R500: Cannot restore Vista using Toshiba recovery disks

  I downgraded Vista to XP loaded factory.
  However, I would now like to restore back to Vista.

  I have disc 1 & 2 ' product Recovery DVD-Rom; Portege R500 disks.
  They are also marked "Windows Vista Business (SSD/PATA)" has been provided by Toshiba.

  I don't know how to use these discs to restore my operating system to Windows Vista. When I insert disc 1 and after loading some files, a message "cannot read the file source or disk - Preinst2.SWM" and I can not go any further.

  An instruction step by step would be greatly appreciated

  I wonder why you receive two recovery disks. As far as I know Toshiba Vista Recovery image is stored on a DVD.
  Perhaps you have received two CD

  In any case, have you tried to boot from the second disk? I mean the second recovery CD?

  Usually, recovery is not very sensitive. You must boot from the disc and should follow the instructions on the screen.

  The error cannot read from the source file or disk - Preinst2.SWM looks like a little to the Conference on disarmament would not readable or the CD/DVD drive would not read the disc properly.

• Satellite P200D - cannot install Vista SP1

  I tried times serval update to Service Pack 1 of Vista. After that time of serval downloads, laptop installs Service Pack 1. After that serval hours windows update gives an answer that update is not possible with a message that is not explained by Windows.

  What is the problem with the update?

  Hello

  If you cannot update the SP1 then your Vista is confused upward or SP1 is already installed.

  How have you tried to update the SP1? Have you downloaded it from the MS page made one then you perform the update or have you used the Windows Update option in the Panel?

  In your case, I recommend to check first if SP1 is installed.
  If it was not installed, then rub the BONE using the free CCLeaner tool.

  If you want to update the SP1 version, and then try again.

  If that does not help then retrieve the operating system using the Toshiba drive and then try to upgrade Vista to the last State.

  Good bye

• Satellite L300 PSLB0E - cannot install Vista and Win XP

  Hello

  I have a L300, model number PSLB0E sat. \
  It was originally loaded with vista home premium, but it starts now not at all.
  I made a disc of vista Home premium and the number to go with it, but it gets as far as "windows installation" but then it stops.

  I tried to new hard drive, same loading XP pro not working!
  I think it's Bios, but after the download from Toshiba on this PC and transfer it to a memory stick, my laptop can't see it?

  Please can someone point me in the right direction?

  A big thank you in advance Paul

  Hi mate

  Please check in the BIOS if the disc is visible.
  If so, then set compatible SATA to AHCI mode and then try to boot from the Vista or Win XP disc.

  But if the HARD drive is not visible in the BIOS then it would mean that the HARD drive is dead and so you cannot install the operating system.

  Check it!

• Equium A100-147: cannot install Vista because of startup configuration problem

  Equium A100-147 (Windows MCE) bought compatible Vista and bought my promised copy of Vista... used Toshiba step by step DVD ROM upgrade and also updated the Bios.

  Tried to load Vista Home Premium and after going through all the steps, it came with this message...
  «Could not update the computer startup configuration - installation cannot go ahead «...»»

  How should I proceed and what is useful to load Vista.
  Thanks in advance for any help.
  Considers that Howard.

  Hello

  How have you tried to install vista on the laptop?
  Have you tried to switch the MCE to Vista or were you running the new clean install of Vista?

  In my opinion, you must perform a clean installation. Don t updated the existing MCE of Vista.
  In such cases, you can join different installation problems

  If you are an owner of an original MS windows XP CD try to run the console of your windows XP CD recovery.
  Demarrer start from the CD at startup, and then press R to access the recovery console after loading the driver.

  In the recovery console, typefixbootand then restart your laptop.
  Then insert your Vista installation and restart.

  This should solve your problem.

• OfficeJet 5740: Cannot fax from the computer

  My new Officejet 5740, purchased on 11/15/14, worked fine until February 2015 - no problem with any of its functions, including faxes.

  That was all the time I went from a wireless connection to a USB connection and since then out of faxes cannot be sent from the computer, even if they can be sent from the printer by using the LED screen. There is no problem with the incoming faxes.

  Sending the printer with the LED screen is a nuisance of errors compared to the convenience of use of the computer. Lengthy discussions with HP Technical Support have been of any help. The technicians seem to think I should just give up and use the LED screen on the printer.

  After trying in vain to send an outgoing fax using the computer, the Fax status window appears saying "queue... "as the status of the fax, and it never goes one further.

  Is it possible that my passage in wireless USB connection type caused the problem? Maybe I need a different driver? If Yes, where can I download one, and what should I go for? Thank you.

  Hello @Harry46,

  Welcome to the Forums of HP Support! I see that you are not able to send a fax from your HP Officejet 5740 computer, you can send a fax from the front panel.

  I think you just need to update the drivers and software, please proceed with the following steps:

  1. disconnect the USB key if you use a direct connection.

  2. remove the HP software JO 5740 uninstall from the control panel of your computers an option of the program.

  3. restart the computer.

  4. make sure that all them that software JO 5740 has disappeared from the list of programs, but also your HP folder listed under all programs in your Start Menu.

  5. now, go ahead and download the software and drivers for your JO 5740 (DO NOT connect USB until the software prompts you to):

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-134701-2&cc=us&DLC=en&LC=en&OS=4063&productOid=6617254&sw_lang=&product=6617256

  6. go ahead and print a test page.

  7. If you are unable to print a test page, please run the HP Print and Scan Doctor- designed by HP to provide users with troubleshooting and problem-solving features needed to solve many common problems encountered with HP print and scan products related to Windows computers.

  Please let me know if this succeeds, can now send you a fax from the computer? I'll watch for your reply.

  Thank you

• Cannot install Vista SP1

  I tried ALL the solutions proposed and it will NOT be installed. It downloads fine, but after "installation" it fails. error code FFFF 0x8000. I have the stand alone version and the version of the SP1 updates. Can someone help me, please?

  I am preparing my laptop to Windows 7, which expect to receive any day. When I ran the W7 Upgrade Advisor report - it says that the installation of SP1 is a must.
  Help!

  Client Windows Update not found with error 0x8000ffff.

  The error may occur if one of the following factor is true:

  1. the services concerned of the Windows Update stop working.

  2. the temporary folder of Windows Update has been damaged.

  3. Windows Update Agent does not work.

  For now, let's try the following steps to solve the problem. After you complete the steps, please run Windows Update to check the result.

  Step 1: Check the services concerned of the update of Windows
  ============================

  1. click on Start, type services.msc in the Search box and press ENTER.

  2. in the right pane, check if the following three services have been launched:

  (BITS) Background Intelligent Transfer Service
  Windows event log
  Windows Update

  If not, please start one by one.

  Step 2: Rename the folder C:\Windows\SoftwareDistribution Windows Update
  =========================================

  1. click on Start, type notepad in the Start Search box and press ENTER.
  2 copy the following commands, and then paste them into the opened Notepad window:
   
  net stop wuauserv
  net stop Cryptsvc
  Ren %windir%\SoftwareDistribution SD.old
  Ren %windir%\system32\catroot2 catroot2.old
  net start wuauserv
  net start Cryptsvc
   
  3. After you paste the above commands, please close the Notepad window. Choose Save when you are prompted to save the file. Type "register.bat" as the file name, and choose desktop in the left as the location Panel.
  4. refer to the desktop, right-click on the register.bat file and choose run as administrator.
  5. you will see a window of type BACK treatment.

  Note: Please look at the cmd window and make sure that it says it has successfully launched. After that, run Windows Update to test the issue again.

  If the 0x8000ffff error persists when you search for updates, we will reinstall Windows Update Agent 3.0.

  Step 3: Reinstall Windows Update Agent
  ===========================
  1. Please download the file from the following link:

  A new version of the Windows Update Agent is available
  http://support.Microsoft.com/kb/946928

  2 save the file to D: drive.

  Note: Please select a drive where Windows Vista was not loaded because the file cannot be launched directly from the root directory of the system.

  3. click on Start, click on run, type: "D:\WindowsUpdateAgent30-x86.exe /wuforce" (without the quotes) and press ENTER to install the Windows Update engine.

  Note: There is a space between "D:\WindowsUpdateAgent30-x86.exe" and "/ wuforce.

  BTW - the latest Windows Update Agent will change the appearance of the control panel of Windows Update

  Screenshots of Vista - before and after the Windows Update Agent 7.4.7600.226 - http://taurarian.mvps.org/Screenshots_Vista/before_and_after.html

  For MS Blog: http://blogs.technet.com/mu/

  TaurArian [MVP] 2005-2010 - Update Services

• Cannot install Vista 32 bit SP2. (Original version)

  I was trting to install the SP2 update as it came out. I did a clean boot and shut down all start up programs, downloaded the stand alone SP2, tried to download from the update site, use the System File Checker tool, downloaded and installed update readiness tool and turned off all firewall and anti virus, etc... I'm at the end of the roll. What should I do to get this thing installed? I have never had this kind of problem before and don't know what I could do wrong. Message saying updates cannot be instralled and the computer is back changes made to the computer. There is an event id 4375 in the event viewer. I don't remember any other error code that appeared. Help, please!

  Error message when you try to install Windows Vista Service Pack 2 or Windows Server 2008 Service Pack 2: "an internal error occurred during the installation of the service pack:
  http://support.Microsoft.com/kb/967818

  The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista
  http://support.Microsoft.com/kb/949358

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
  http://support.Microsoft.com/kb/947366

  ==========================

  Free unlimited installation and compatibility support is available for Windows Vista SP2 issues until August 30, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack).

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Cannot install Vista Service Pack 1, error 8024200d.

  Original title: cannot update

  I get the error message 8024200d message when I try to install Service Pack 1 for Vista.  I did try it again 3 times with no luck.  I have the update in order to install my new Cisco router.  Help, please.  Thank you

  Hello!

  Error 0x8024200D SUS_E_UH_NEEDANOTHERDOWNLOAD code
  The Setup program requires more data to download

  Translation: Everything you are trying to install, your machine needs some
  other updates to be installed first.

  Try to download Windows Vista SP1 form this link:

  http://www.Windows.Microsoft.com/en-us/Windows/downloads/service-packs?WT.mc_id=MSCOM_EN_US_DLC_HIGHLIGHTS_131W4ENUS21980

  Click on Windows vista, the former services Get packs free of charge and chose the 32-bit or 64-bit depending on what version you have.

  To check

  1. • Open the Windows 'Start' option and click on 'control panel '. Click on "System and Maintenance", then select "system". A new window opens.

     • 2

       You should see 64-bit or 32-bit under 'System' in the new window. If you use a 32-bit system, you can find out if your PC is capable of running a 64-bit system. To find out if your computer can run a 64-bit system, click again on "System and Maintenance" in the control panel and select "information on the performance and tools." Spearhead of a new window.

     • 3

       Click on "View and print details." You should see the operating system that you use under "Type of system." You will see "compatible 64" if it is 64 bit

  Tell me if this helps

• FAX Vista download s/w?

  So, how can we convince Microsoft that it would be in their best interest to offer a free download for the missing in VISTA Home Premium and Basic FAX software?

  Hi Sligo,

  Please use the Forum of the community for Vista.

  The fax software is available in the Business and Vista Ultimate packages. You can read about it here.

  http://www.Microsoft.com/Windows/Windows-Vista/features/fax-scan.aspx

  It is very unlikely that Microsoft that will change.

  However, if you want to propose this change, please follow this link to make your suggestion.

  http://connect.Microsoft.com/

  I hope this helps.

  Please let us know if we can do something else.

  Matt Hudson
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.