CVI2009 post-build Action not working

Similar Questions

• I have a Hp and the micro build does not work how to fix this?

  Can someone help me please? I have a HP T5800 and the micro build does not work how can I solve this problem?

  Hello

  Check with HP, their drivers support and documentation online and ask in the forums about known issues.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  ========

  It's probably the pilots who are responsible and who may not really be later or they need to be
  re-installed anyway. The best way is to manually review using the methods below.

  References to Vista also apply to Windows 7.
  
  Control Panel - device - SOUNDS - look for HD Audio Manager - Mine said RealTek High
  Audio definition (this is an example and you can have an other name/maker).

  Write the description and the model double click on it - tab drivers - write down
  Version. Now click on update drivers who cannot do anything as MS is far behind certifying
  drivers. Then CLICK RIGHT on it and UNINSTALL - REBOOT - this will rebuild the driver
  stack.

  You can have the default windows or a former certified pilot and it's all or part of the
  issue.

  Now, go to the site of the manufacturer of the system and get the latest Audio/Sound drivers - download - SAVE - go to
  where you put - right-click on Reboot - RUN AS ADMIN-

  Check the Version tab of the driver in the Device Manager as the restoration of the sound card drivers often
  and then install the latest version. Restart and check after each test, not
  rare to have to run the pilot of 1 to 4 times or more. Just the version make sure you
  installed shows upward on the tab of the driver.
  
  Go to the site of the manufacturer of the device, and then search for the even more recent drivers and install repeat
  operating mode. Download - SAVE - go to where you put them - click on - RUN AS
  ADMIN - Reboot

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers to 7 (updated drivers manually using the methods above is)
  to ensure that the latest drivers from the manufacturer of system and device manufacturers are are preferably)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  ---------------------------------------------------------

  After the updated driver.

  Click with the right button on the speaker near clock - recorders - right click in the box - check see the
  Disconnected devices and show disabled devices - check your micro - highlight
  then on lower right properties. Make sure that the appropriate injector is selected and check
  other parameters - levels tab make sure that MUTE is disabled and APPLY / OK to change.

  Also in the search for some Audio Manager Panel (perhaps named after the manufacturer of the sound driver). Mine
  is the RealTek Audio Manager, yours can be quite different name if you have one.

  How to activate Audio devices hidden in Vista
  http://www.Vistax64.com/tutorials/143447-audio-device-enable-hidden-devices.html

  Connect one microphone, music player or other audio device to your computer
  http://windowshelp.Microsoft.com/Windows/en-us/help/b0e3d7fb-1b4a-4926-8254-65da289209261033.mspx

  Problems with sound and audio or no sound - a Mr Fixit
  http://support.Microsoft.com/GP/NO_SOUND

  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  The volume of the audio recorded by sound recorder in Windows Vista or in Windows 7 is less than
  in Windows XP (or Vista)
  http://support.Microsoft.com/kb/973446

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• DPS App Builder does not work

  Hi, the DPS App Builder does not work, I can not move the App and cointue details screen fill info. The 'next' button does not work. Do I have to pay a company account?

  

  Creative cloud no longer supports DPS Edition single starting from May 1. You can learn more about how to get a license DPS looking ions.html https://helpx.adobe.com/digital-publishing-suite/help/digital-publishing-suite-pricing-opt.

  Neil

• Flash in the last nightly build is not working and causing accidents. Help?

  I use an Asus Transformer tf101. I updated today every night and now flash does not work in the program. Once I try to play any flash video, the program crashes and it blocks once or twice more after that before so I can use it again. I deactivated all my plugins and cold booted but in vain.
  Another question, that I have, is that it freezes sometimes on the homescreen at startup. This instance occurs usually after that I try to type an address or use a bookmark. The only way I found around her had to press one of the three icons top site first. Does anyone have a solution to this?

  Edit: I started the previous generation at the moment. It is not as nice as the style of the most recent version, but it plays better than other mobile browsers out there flash video. As a break, jump before or put the video in full screen, the controls are always hit or miss.

  This is a known issue with the current nightly builds. We hope she will rule early next week. I don't think Aurora builds are affected by this problem. http://www.Mozilla.org/en-us/mobile/Aurora/

• 12 c Builder does not work

  Hello

  I make a new thread to highlight my problem (I have read not opening not generating reports Oracle 12 c but no results).

  My 'eta reports 12 c' production facility is on a 64-bit windows server R2 12.

  I followed all the steps in the other thread I can access these URLs without problem and everything seems to work well:

  http://localhost:7001/em

  http://localhost:7001 / console

  http://localhost:9001/forms/frmservlet

  reports / http://localhost:9002 / rwservlet

  My problem is the rwbuilder which does not work (.exe and .bat):

  .with rwbuilder, exe, error is rwbuilder.conf:java.lang.NullPointerException rep-50125

  with rwbuilder.bat, I got a message stating that the system could not find /bin/rwbuilder.exe

  What could be the cause?

  Gianpaolo

  Hello

  I solved the problem by editing the rwbuilder.bat file.

  There were two lines bad (changed from my installation) that attaches to both system settings is not a value:

  (1) set DOMAIN_HOME = domain_home$ $$$--> set domain_home = E:\Oracle\MW\OH\user_projects\domains\base1

  (2) together COMPONENT_NAME = Component_name$ $$$--> set COMPONENT_NAME = rt1 (note that rt1 is my instance of reporting tool)

  Domain_home is defined in the report.bat which is performed after:

  call %DOMAIN_HOME%\reports\bin\reports.bat

  I don't know where is the name of the defined component.

  I don't know if domain_home and the name of the component are not defined for a problem in my installation

  Concerning

  Gianpaolo

• Departure of DPS App builder does not work. Java error message.

  Given that I've upgraded to Mac OS 10.10 the App Builder no longer works.

  It is said that it needs Java. But Java is installed. I walked to the oracle site and upgraded to latest (8u25 at the time), but to no avail. It stills shows the same error. I also tried to reinstall Appbuilder DPS... also no effect. I rebooted the system, etc. without effect.

  Edit: Also this link for a promised work apple JRE: Java for OS X 2014-001 dosen't work for me (still empty, no download). Strange thing... on the website of oracle to check what version I have, it is said correctly 8u25. If I check in the terminal with: java-version, it says 'No Java runtime present'... so I guess the problem is on the side of Apple. Edit-end.

  Here is a screenshot:

  The message is in German. It is said: 'Install Java. To use the DPS App Builder, Java must be installed. Install Java and then restart App Builder. »

  

  You need to install Java from here: http://support.apple.com/kb/DL1572.

  Neil

• Photosmart 7520 wakes up randomly. Resolution posted above does not work.

  Received it about a week before, connected through Netgear router and modem Netgear wireless. Randomly you will hear 2 tones, sounds as he feeds a sheet across and self test then one more strong signal but when I check, no impression of any kind. I can print photos and a page of text OK. I saw others had this problem a year before, so I turned off UPnP on the router. I tried EWS, but when I typed the address of printers, it just sits there, then goes to a blank page. The printer is maximally 6 IP of the router in the same room, each one of them.

  After implementation to start cartridges, I replaced the CMJ and put a 564 Black XL in but still have black (Photo) on the far left installed.

  This is happening day and night.

  Hi @Sandi7

  I'm not entirely sure of that figure. You said that you can print photos and text, but cannot enter the integrated Web server. You express a wireless broadcast, or is the only problem the printer wake up randomly?

  The printer is probably wake up to calibrate the print heads and prevent ink dry up, it is part of regular maintenance of printers to maintain the health of the printer.

  Funny story, I have my printer near a window and an air conditioner in the window, it was at the time a new printer and a new location. One morning when I was getting ready for work I've heard enough noise thought someone was trying to bite into my window, hahaha, silly me I forgot that the printer was there. He was of course it is!

  It is best to keep the printer for this reason. When the printer is turned off during a period of time the inks can be blocked, when the printer remains basically takes care of itself.

  I hope that answers your request, if you encounter a problem with wireless, or have any questions or concerns, feel free to post back and I'll do my best to help!

• Just installed windows cs6 DPS and Folio Builder does not work

  I just installed the windows CS6 DPS, but there is no option in the constructor of Folio, and yet I can create new Articles. How do the work of Folio Builder?

  Must be connected to the internet? I work for a large organization and have restrictions to firewall restricting internet access In Design, but thought I could work offline.

  Clues of what I might do wrong?

  Thank you

  

  If you have corporate firewall restrictions, I can send you the ports on which your can unlock for that to work. I'll send him e-mail and will also send a PM.

• Product build ANT not work package with AIR SDK 3.5

  I used AIR SDK 3.1 and ANT script to compile and package the application iPad (AdHoc to test). I tried to go to 3.5 SDK today but when I install *.ipa and launch on the iPad it hangs on the spalsh screen.

  I tried to release build using Flash Builder UI and it worked. So the question is has something changed in terms of packaging/compilation options?

  Just in case where attached to my current ANT script:

   <target name="Compilation" depends="Initialization"> 
       <mxmlc file="${main_class}" output="${swf_file}" locale="${LOCALE}"  static-rsls="false" accessible="false" configname="airmobile"
                  optimize="true" actionscript-file-encoding="UTF-8" keep-generated-actionscript="false" static-link-runtime-shared-libraries="true" 
                 debug="${debug_mode}"  failonerror="true" fork="true"  maxmemory="1024m">
            <source-path path-element="${class_path}"/>
            <load-config filename="${FLEX_HOME}/frameworks/airmobile-config.xml"/>
            <load-config filename="${config_file}"></load-config>
            <library-path dir="${lib_path}" includes="*.swc" append="true"/>
       </mxmlc>
  </target>
   <target name="Packaging" depends="Compilation">
        <java jar="${ADT}" fork="true" failonerror="true">
            <arg value="-package"/>
            <arg value="-target"/>
            <arg value="ipa-test"/>
            <arg value="-provisioning-profile"/>
            <arg value="${ios_provisioning}"/>
            <arg value="-storetype"/>
            <arg value="pkcs12"/>
            <arg value="-keystore"/>
            <arg value="${ios_keystore}"/>
            <arg value="-storepass"/>
            <arg value="${ios_pass}"/>
            <arg value="${ipa_file}"/>
            <arg value="${app_descriptor}"/>
            <arg value="${swf_file}"/>
            <arg value="-C" /> 
            <arg value="${class_path}"/>
            <arg value="assets/icons"/>
            <arg value="-C" /> 
            <arg value="${release_path}"/>
            <arg value="Default-Portrait.png"/>
       </java> 
  </target>
  
  
  

  Thank you

  You can try using the settings used by Flash Builder to package the application, details that are:http://helpx.adobe.com/x-productkb/multi/compilation-results-flex-builder-flex.html

  Update your ANT script with these and try again.

  Please come back and tell if it solved the problem and what changes had made you your ANT script.

  Thank you

  Neha

• Visual Query Builder does not work

  I use the ColdFusion Flex Builder 3 (3.0.1.205647) extensions, and I can't use the Visual Query Builder. This is a new installation for ColdFusion8. I have configured RDS, I even test the connection successfully.
  
  I can use the RDS DataView and see the databases, click cfartgallery, for example and see the facility 'art' content of the table. No problem. Then I click the button of "Visual Query Builder", and nothing happens. The query designer does not appear.
  
  It's not a big problem until I have try running the CF/Ajax application wizard and edit the page master is supposed to open query... Builder even problem. Same here, it will not open. So I can't change anything or use the wizards at all. I get no error message, it just does nothing when I click on the button.
  
  Does anyone else have this problem? Is there a setting I'm missing or need to set up after a new installation in the CF administrator?

  Using vista?

  Click Flex and then click on run as administrator

  --
  Ken Ford
  Adobe Community Expert Dreamweaver/ColdFusion
  Fordwebs, LLC
  http://www.fordwebs.com

  "adimauro" wrote in message
  News:g8pt2n$JH1$1@forums. Macromedia.com...
  > I use the ColdFusion Flex Builder 3 (3.0.1.205647), and
  > I
  > cannot use the Visual Query Builder. This is a new installation for ColdFusion8. I have
  > have
  > RDS set up, I even test the connection successfully.
  >
  > I can use the RDS DataView and see the databases, click cfartgallery,.
  > for
  > contents of the example table and the exhibition 'art '. No problem. Then I click on the
  > "Visual Query Builder" button and nothing happens. The query designer is
  > not
  > show.
  >
  > It's not a big deal, until I have try running the CF/Ajax application wizard, and
  > edition
  > the master page is supposed to open the Query Builder... same problem.
  > Even
  > here it does not open. So I can't change anything or use the wizards at all. I have
  > don't get any what error message, it just does nothing when I click on the
  > button.
  >
  > Someone else has this problem? Is there a setting I am missing or have
  > to
  > set up after a new installation in the CF administrator?
  >

• The build does not work the same as the vi in the project

  I have problems with the exe file. I made a very simple example of what happens. To test JKI - Machine of State pending based on a string (Basic) v1.0 (openg) is necessary.

  I made a sample program with uses the JKI - State Machine on hold based on a string v1.0 (base)

  When I opened the project and run the test.vi light turns on. When I press OK, the light will be off and the program waits 2.5 seconds and then close it.

  It is the way I want to launch the program.

  From this file, I make an executable and run the program. The light comes on, but when I press OK, the program closes in without waiting. Do I did wrong?

  Rens

  The file attached test.zip are the project files with 2 vi. (test.vi and test2.vi)

  The attached application.zip is the executable file for the program labview above.

  problem solved

• Reading TCP does not work sometimes

  Hi all, I have a problem when my .exe build does not work on some computers, but works fine on others. It uses a tcp connection to grab data out of a custom server program that stores data bluetooth. The construction of program works fine on my development machine, but also another office, but on a 3rd computer code simply does read the data from the server. I have disabled the windows firewall, but I have no idea what else to try - someone has this problem before?

  That tells me that there is a driver that you have not installed on the other computer.  LabVIEW 2013 tries to automatically determine what drivers you need when you configure a Setup program.  This question does not sound as if she had something to do with TCP/IP.

• SCAN does not work

  Hello.
  I installed a Linux R2 RAC Database 11g on two nodes. First of all, I'm not familiar with SCAN so my request may sound silly.
  
  The problem is that when I try to connect from Windows using SCAN post it does not work. I didn't not try another station LAN (because I didn't).
  
  One of the nodes, I opened tnsnames.ora that contains only this:
  
  LABDB =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP) (HOST = lab - scan.home.adi)(PORT = 1521))
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = labdb.home.adi)
  )
  )
  
  If I connect from one of the nodes, it works fine:
  
  [oracle@node1 bin] $. / sqlplus system/salam@LABDB
  SQL * more: Production version 11.2.0.1.0 on Mon 2 Jul 08:30:22 2012
  Copyright (c) 1982, 2009, Oracle. All rights reserved.
  Connected to:
  Oracle Database 11 g Enterprise Edition Release 11.2.0.1.0 - 64 bit Production
  With the partitioning, Real Application Clusters, OLAP, data mining
  and Real Application Testing options
  SQL >
  
  If I try to Windows, it isn't (I used exactly the same content in tnsnames.ora)
  
  C:\Users\a2dyxzz > sqlplus system/salam@labdb
  SQL * more: Production version 11.2.0.1.0 on Mon 2 Jul 16:02:18 2012
  Copyright (c) 1982, 2010, Oracle. All rights reserved.
  ERROR:
  ORA-12537: TNS:connection closed
  Enter the user name:
  ERROR:
  ORA-12560: TNS:protocol adapter error
  
  If I edit tnsnames.ora on Windows and HOST = node1.home.adi (the host name of the node 1), it works fine.
  
  C:\Users\a2dyxzz > sqlplus system/salam@labdb
  SQL * more: Production version 11.2.0.1.0 on Mon 2 Jul 16:32:06 2012
  Copyright (c) 1982, 2010, Oracle. All rights reserved.
  Connected to:
  Oracle Database 11 g Enterprise Edition Release 11.2.0.1.0 - 64 bit Production
  With the partitioning, Real Application Clusters, OLAP, data mining
  and Real Application Testing options
  SQL >
  
  After documentation, everything seems fine:
  
  C:\Users\a2dyxzz > nslookup lab - scan.home.adi
  Server: Poppy.home.adi
  Address: 192.168.22.10
  
  Name: lab - scan.home.adi
  Address: 192.168.22.152
  192.168.22.153
  192.168.22.151
  
  C:\Users\a2dyxzz > ping lab - scan.home.adi
  
  Ping lab - scan.home.adi [192.168.22.153] with 32 bytes of data:
  Reply from 192.168.22.153: bytes = 32 time = 7 ms TTL = 63
  Reply from 192.168.22.153: bytes = 32 time = 6ms TTL = 63
  Reply from 192.168.22.153: bytes = 32 time = 304ms TTL = 63
  Reply from 192.168.22.153: bytes = 32 time = 4 ms TTL = 63
  
  Ping statistics for 192.168.22.153:
  Packets: Sent = 4, received = 4, lost = 0 (0% loss),
  Time approximate round trip in milli-seconds:
  Minimum = 4ms, Maximum = 304ms, average = 80ms
  
  [grid@node1 ~] scan srvctl status $
  VIP scan1 SCAN is enabled
  VIP SCAN scan1 runs on the node node1
  VIP SCAN scan2 is enabled
  VIP SCAN scan2 runs on the node node2
  SCAN VIP Scan3 is enabled
  SCAN VIP Scan3 runs on the node node2
  
  [grid@node1 ~] $ srvctl status scan_listener
  LISTENER_SCAN1 listener to SCAN is enabled
  SCAN of the earpiece that listener_scan1 is running on the node node1
  LISTENER_SCAN2 listener to SCAN is enabled
  SCAN of the earpiece that listener_scan2 is running on the node node2
  LISTENER_SCAN3 listener to SCAN is enabled
  SCAN of the earpiece that listener_scan3 is running on the node node2
  
  [grid@node1 ~] listener srvctl status $
  Listener LISTENER is enabled
  Listener LISTENER runs on one or more nodes: ud1 UD2
  
  [grid@node1 ~] scan srvctl config $
  SCAN name: lab - scan.home.adi, network: 1/192.168.22.0/255.255.255.0/eth0
  SCAN VIP name: scan1, IP: /lab-scan.home.adi/192.168.22.153
  SCAN VIP name: scan2, IP: /lab-scan.home.adi/192.168.22.151
  SCAN VIP name: scan3, IP: /lab-scan.home.adi/192.168.22.152
  
  [grid@node1 ~] $ srvctl config scan_listener
  LISTENER_SCAN1 listener SCAN exists. Port: TCP:1521
  LISTENER_SCAN2 listener SCAN exists. Port: TCP:1521
  LISTENER_SCAN3 listener SCAN exists. Port: TCP:1521
  
  [grid@node1 ~] srvctl config listener $
  Name: LISTENER
  Network: 1 owner: grid
  Home page: < CRS Home >
  End points: TCP:1521
  
  Thank you
  Adrian
  
  Published by: Adrian on July 2, 2012 P 06:55

  Hello
  Please put here

  
  
  $GRID_HOME/bin/lsnrctl service LISTENER_SCAN2
  
  $GRID_HOME/bin/lsnrctl status LISTENER
  
  SQL> show parameter remote_listener
  
  SQL> show parameter local_listener
  
  

• HP ENVY 15 Notebook PC: HP Envy 15 action keys works do not (F9, F10 and F11)

  My laptop has been working fine since purchase, but last week, I noticed that action F10 F10 & F9 keys (jump, play/pause, skip) did not work for their function. Before last week I could just press the key to activate, I read other posts of this forum and the answers did not work pressing fn + alt + (key action), either by pressing fn + key action. To make this work I need to access the bios screen and change the default values, but it only works when the laptop is on. If I turn the laptop, turn again he resorts right back to does not. Action all other keys work e.g. keyboard backlight, volume, brightness, etc.

  Any solutions would be welcome.

  Thank you.

  Product name: HP ENVY 15 Notebook PC
  Product number: J2E80EA #ABU

  Laptop: HP ENVY 15-j151sa

  Hello @Spudy96,

  Thank you for your quick response!

  You can try to perform a System Restore.  If this does not work, then you could also try to install the previous version of the BIOS of your Support Site.  Let me know how it goes.

  Good luck!

• [LAVA Cross Post] CTRL + SHIFT + Alpha shortcuts do not work in LabVIEW

  Cross-post from the LAVA: http://lavag.org/topic/15619-ctrlshift-shortcuts-sometimes-not-working-in-labview/

  Bug Synopsis: CTRL + SHIFT + Alpha shortcuts do not work in LabVIEW. In particular, CTRL + SHIFT + Z, CTRL + SHIFT + E and CTRL + SHIFT + S

  Test installation: 32-bit LV2012 with the patch of f1 running on Win7 64-bit inside a Parallels VM in OS X 10.8.1 8

  To sum up the tests, I tried:

  • Several different combinations LabVIEW, guest OS and host OS all fail, including:
  • • LV2012f1 32 and 64-bit and 32-bit LV2009
    • Win7 32 and 64-bit and Windows XP x 64
    • Parallels and Parallels 7 8
    • OS X 10.7 and 10.8
  • Capturing the keyboard to the virtual machine
  • Turn each keyboard setting possible on Parallels, guest and host
  • Reinstall the keyboard drivers
  • Connect a checked keyboard that works on a native Windows machine
  • LabVIEW.ini deleting and letting it regenerate
  • Remapping the shortcuts, for example, CTRL + SHIFT + E to CTRL + E - in this case, 'Show project' works, so this may indicate that it is a problem registering the shortened press, do not invoke the action itself.
  • Sending via the keystrokes on-screen keyboards of guest and host
  • Sending the sequence of keys via SendInput by user32.dll WinAPI
  • Test every imaginable combo of SHIFT, ALT/OPTION, FN, COMMAND/CMD, CONTROL
  • Reinstall the virtual machines from scratch and relocation of LV
  • Here's a kicker: CTRL + SHIFT + Alpha shortcuts work very well on other windows programs (I tried 4 different programs, including Chrome, Notepad ++, Paint.NET), but it does NOT work for VIPM with CTRL + SHIFT + C. This means that only two programs where there are CTRL + MAJ + Alpha bugs are both related to LabVIEW.
  • Here's a better: it is only CTRL + SHIFT + Alpha shortcuts with the prob - CTRL + SHIFT + 3 properly active / deactivates grid alignment and the "tools > Options > Menu shortcuts" will record any shortcut CTRL + MAJ + Non-alpha; He was not only meets the shortcuts CTRL + SHIFT + Alpha.

  New idea of troubleshooting is highly appreciated; Please feel free to jump in here or on the LAVA.

  X. says:

  Still well and alive in Parallels 9 and LabVIEW 2013 SP1. Of course I could upgrade the latest versions to see if things have become more.

  Any news on that?

  @mellroth has found the solution :-)