CX240E - issue connection accessories video light?

Similar Questions

• Interruption of the WiFi connection.  Green light is the Airport Express. Settings Network said the cable for the Wi - Fi connection is not connected or the device at the other end does not respond.

  Interruption of the WiFi connection.  Green light is the Airport Express.  Settings Network said the cable for the Wi - Fi connection is not connected or the device at the other end does not respond.  Tried to reset Airport Express, but remained light amber or orange flashing.  I unplugged it and waited and plugged back into the light turned green.  Rebooted computer (Mac Pro). Parameters of said the same thing.  Managed to create a WiFi "network with the ethernet in the network settings section, and yet I am wireless.  I am online but not wired and WiFi settings still says not connected, and either the cable for the Wi - Fi is not plugged or the device at the other end does not respond. I don't understand this situation.  My original WiFi name disappeared.  How I am on the internet?

  What is the brand and model of the modem Internet you have the AirPort Express directly connected by Ethernet? What exact model number is your Express?

• iPod Touch 5 Gen - iOS 9.3.1 lightning connector issues - with accessories

  Has anyone seen a problem using iOS 9.3.1 on an iPod Touch 5th generation with lightning connector devices?  Specifically, I use the iPod in a cradle of scanner which connects via the connector of the lightning, until iOS 9.3.1 the cradle was visible to the application, but once it has been updated the scanner loses communication to the iOS device and application.  IPod charge and connect to iTunes, no problem, but refuses to see the cradle, I have another iPod on an older version of iOS, which connects to the cradle even without problem.

  To try to find, I've updated the iOS to 9.3.2 beta fault from the site of the developer, this problem has now fixed the issue with the cradle.  I can't that assume Apple broke the connection in iOS 9.3.1?

  Sometimes an iOS update breaks compatibility with accessories. Since then, he has worked with next beta which seems to be the cause.

  All yo can do is to continue using the beta until the version is rejected in the pubis.

  Have reported the problem to Apple to ensure that the beta version is not yet revised to cause the same problem?

  https://www.Apple.com/feedback/iPodTouch.html

• Issue of S-Video on satellite series

  I'm pretty abreast with computers, but would be just as confirmation that it will not harm my satellite phone if I attach a S-video cable to the laptop (the other end connected to a TV, if that makes a difference) then he turned.

  I did a search in the forums and checked the manual for references to the issue, but then I've never seen any statement does not connect when turned on, nor I saw advice saying that it is really safe to do.
  Can anyone confirm the experience?

  TIA

  Over the past 8 years, I have used several different Toshiba notebooks and I can really confirm that. Laptop computer can be on, TV can be on and you can attach the S-video cable when you want.

  That a situation is to me reasonable: before disconnecting the cable S-video of your key combination laptop use FN + F5 and move to the rear LCD. After doing this cable to remove the S-Video.

• about connection iPod video car

  I have an old video of ipod. I connect it to my car with a usb adapter that is due to the fact battery will not hold a charge. He however repeat myself "ok to disconnect" on the screen even if it will play the music. I have to unplug the unit to see the screen and change the song. Is it possible to plug it into the car and be able to still see the music list?

  What happens if you do a Reset when it is connected?

  Learn how to reset your iPod - Apple Support

  If you connect it to a USB port on a car audio system, you can connect to the current (or "cigarette lighter") using the appropriate adapter.  If the connection is purely a power connection, I don't think you will get the message OK to disconnect .  It would be like the connection of the iPod to a power USB home adapter.

• Error: not connected during video chat in Facebook.

  Original title: can someone please help me?

  I am connected to facebook and try to make a video call but when I try, it says im not connected, but I am connected. Help, please

  Hello

  1. what browser you use to access Facebook?

  2. using any application that allows you to use the video call feature?

  3. the question facing you to access all the other sites?

  4. What is the full error message?

  Please provide more information on the issue to help you best.

  If the question is limited to video chat in Facebook, I suggest you port your application to Facebook support.

  http://www.Facebook.com/help/

• Satellite L20: connection S-video TV - no signal

  Hello

  I connected my Satellite L20-121 (PSL20E-00C00PRU) to the TV with S-video cable. Nothing happened. There is a sign on TV'S-video - no signal. Where I'm wrong?

  Thank you very much to all those who can help me :)

  Hello

  The laptop supports an ATI graphics card?
  If yes-> go graphics card-> properties Advanced settings-> and select the view tab.
  There you can turn on the TV set.

  But as far as I know that this can only be done after the s-video cable has been connected to the laptop and TV set.

  By the way: on some TV s it s important to enable the Svideo option

• Re: Equium - connection S-video to the TV no longer works

  I used to be able to clone or extend my external desktop on TV using the s-video connection. It stopped all of a sudden, the cable is fine as is the TV that I tried them with other laptops, and the s-video port in the laptop looks and feels solid. So physically things seem good.

  I tried to update the drivers, flashing the BIOS, upgrade to Windows 7, restore disks created when the laptop was purchased first running. VGA and HDMI ports work perfectly, but I need to use the s-video and I'm going to a blender that has only the RCA video inputs.

  Someone at - it fixes for that or someone knows of a switch that has red yellow and white phono ins and as well as VGA or HDMI in?

  Any ideas would be much appreciated

  Hello

  I put t know why it doesn't work, but maybe do you something wrong the combination of keys FN + F5 help you can switch between monitors. It work?

  In addition, you must connect the cable first, before you turn on the computer laptop and TV.

  Also, make sure that the correct TV settings are defined. This means that in the display driver you can choose between PAL and NTSC. It is depending on your TV, so check the manual of your TV.

  You have already restored the recovery disk factory settings? Then check device manager if everything is installed correctly.

• How good my connection to video call?

  Hello

  I have a bad internet connection because of high costs and other things, anyway...

  Is this enough for a good video call?

  It's the same connection that uses the other party

  

  I don't think you can expect good quality with these specifications of Internet video calls. Especially the very low download speed is the limiting factor.

• Qosmio X 770-how to connect a video camera with firewire interface

  Hello

  I want to buy the new QOSMIO X 770.
  I have not found information on firewire.

  The documentation talking about video editing.
  How to connect a camera with firewire?

  No connector, no card expresscard...

  Hello

  You can also use an adapter USB to Firewire which allows you to connect device firewire to USB port of the laptop.
  USB 2.0 is 480 Mbps interface and FireWire is 400 Mbps but interface so, theoretically, USB 2.0 should be faster, but that's not true. Firewire is faster according to some tests. However, there aren't big differences, so I think that the use of this card must function.
  There are various one USB to Firewire adapter on the market. Simple Google.

• Portege M400 - WLan issues connection Orange Livebox

  Hello

  My landlord has recently upgraded our WLan by introducing an Orange Livebox. I tried to do everything to connect wirelessly to the router, but nothing helped.

  All the other machines were connected with little or no problem/s. I have installed new Configfree, tried connecting via Windows system according to the instruction to the Orange site, re-typed the code several times WEP. Refined network connections, installed new Intel drivers and installed the software Orange Livebox. I'm running out of options fast.

  Wireless connection is found, it tries to connect but will not give me a network address, even with the lights flashing (according to the instructions of Orange), even when it is connected through the Ethernet cable, there is no problem what so ever.

  I've had a look through the forum and found nothing that exactly matches my problem and I tried to implement suggestions that seems familiar, but nothing has worked. Absence of any Advisor, I'll just phone Toshiba or Orange for the tips, however, I want to be spared from long conversations with people in technical support.

  I have a Portege M400 with an Intel (r) PRO/Wireless 3945ABG built into the adapter.

  Suggestions anyone?

  Thank you very much

  David

  Hello

  In this case, it is not easy to say why it happens.
  One of my notebooks is not able to connect to the WLan router because the router supports Wlan 802.11 BG and my Wlan card support has and B mode.

  But you should first check if the Windows Firewall has been disabled. Disable encryption on the router, then try to connect to the laptop without encryption.

  Sometimes the MAC address filtering has been on WLan routers. In such cases, only registered WLan cards can connect to the WLan router.
  I recommend to disable all filters, encryption and then try to connect to the wireless LAN. If you will be able to connect the router you can enable encryption again.

• How to connect the video cable with Qosmio G50

  Hello

  I bought the Qosmio G50-11s and received a video cable with it. (Jack mini jack RCA Red/white/yellow) But I find no way to connect it to my laptop, not the manual or all online resources talks about it. The problem is that I need to capture video from my VCR to my laptop and normal TV antenna comes with a lot of noise, so I have to use video in the cable. Any ideas?

  Thank you
  M

  Hello

  In the past I made some experiences with it. I wanted to create DVD copy old VHS VCR equipment. Using the recorder even? I did this on Qosmio G30 but the principle is the same.

  The fact is that you need to send the signal to the laptop and to do this you must use the video port.
  I do not see that your Qosmio has several of them, so I think that the only way to send the signal to your laptop is to use the antenna port. What video output port you want to use on your recorder?

• Can I connect VHS Video Recorder for Qosmio G20 using the antenna in the Port?

  Hello.

  I connect my G20 a very old VCR. Can I connect it to the antenna in the port? Someone at - it tried? Because it will not need to buy a cable SCART. And for what I searched by linking to the video in Port, if I want to record the signal, I have WinDVD record I did more.
  So I was wondering if connect the VCR to the antenna port. I'll be able to find and record the VHS signal on media center?
  Thank you

  I already tried on S - video In and I get black screen

  More: When I connect the laptop to a TV it works only via the S-video port. When I use the D-video port it simply doesn't work. The black screen.

  Of course you can do it. On this Qosmio laptop TV tuner works on the same principle as usual TV. You can watch movies on Qosmioplayer or using Media Center Edition VHS. In both cases start movie VHS and let Qosmioplayer or MCE sweep all TV channels. On one of them, you will see the picture of VHS VCR.

  All that s. I tested it with Qosmioplayer and MCE too. It works without any problem. I also tested recording option. This also works. Later, I edited material recorded and created DVDs.

  With short words: with Qosmio G20, you can do whatever you want. It's really good multimedia laptop.

• I have a toshiba satellite A15-S 127 my wireless connection or the light does not come on when I try to connect

  even when I turn on my wi - fi I get no light, so when I search a connection it dosent show any wireless connection, how can I know if I have even a wireless card?

  Hello

  1. were you able to connect to the internet wireless with no problems before?

  2 have you made changes on the computer before this problem?

  Check the status of the NIC in Device Manager and send back the same.

  The following articles may be useful:

  How to troubleshoot possible causes of Internet connection problems in Windows XP

  http://support.Microsoft.com/kb/314095

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• USB connection and the light is damaged.

  Hi all

  I don't know that anyone has the same problem with his rocket, but after much connects via USB the light in the right corner is damaged or it turns on when I press them! Sandisk will hold its guarantee when I send to them and want to help with this problem or get a new one?

  SRY for bad English: s

  Dracon

  Yes. Contact Tech Support Center of SanDisk closest to where you live. They are all listed here.