USB connection and the light is damaged.

Similar Questions

• When I connect and the home screen appears I get this message: DLL environment initializeO-multiple Logger could damage files.

  Original title: Logger initialized O

  When I connect and the home screen appears I get this message: DLL environment initializeO-multiple Logger could damage files. What should I do? Thank you - E.Schmidt

  Hello
  
  1 how long have you been faced with this problem?
  2 did you recent hardware or software changes to your computer before this problem?
     
  Try to perform the clean boot on the computer.
   
  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".
   
  Follow the steps provide in the article below to perform the clean boot. http://support.Microsoft.com/kb/929135

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• PC to tv connection error "no signal - check the connections and the external device is turned."

  Original title: pc to tv connection

  I have an Acer Espire Vista 32bits. Connect to a Panasonic TC L32x30 HD TV. The TV has a 'PC' marked port that matches one VGA cable. I have the VGA end of the cable is connected to the TV. The other end is connected to the PC Tower via a DVI adapter to the port where was my monitor.
  TV output is set to "PC". I turned on my PC, the Acer (Bios) screen came. He then shows the block scroll bar. Just as Windows is about to light up, cutting signal. I never get to see my office. A message appears on the screen saying "no signal - check the connections and the external device is turned on."
  I had posted before saying that I had problems ranging from VGA to VGA. That's why I bought the DVI adapter to try another solution.
  I hope I made things clear enough for someone to help him.

  Hello Winston M,.
  I actually solved it. Went to the screen and chose. Connection just how I mentioned. second monitor, default Says. I then checked"Extend Desktop to this monitor.
  As I type this, I can see it on my TV screen.
  Thank you for taking the time to answer my question.
  Problem solved
  Ray

• CD drive does not open and the light does not work

  original title: single CD player problem

  The problem with my CD player seems to be unique I can't find an answer, or someone else with the same problem online.

  My computer is custom built, the CD player lasted me 1.5 years no problem, not until one day I realize, it does not open and the light does not work on it, I ordered a new drive and installed that one, still does not work. so, I replaced the SATA cable which connects to the motherboard, still does not.

  When I go to my computer the drive appears but when I right click > eject it says: "year error occurred while ejecting CD drive D".  It also appears in devices such as SCSI CdRom Device Manager but I am not sure if it's actually my CD player.

  I also tried troubleshooting http://support.microsoft.com/gp/cd_dvd_drive_problems and no solution.

  WTFFF ideas? I really hope that its not the motherboard

  There are two cables you need to connect to the drive, one for data and one for power.  You must connect both training at work.  If you only have the data cable is plugged and not cable power which would be a possible cause of the problem that you see.

  "Ryanb1290" wrote in the new message: * e-mail address is removed from the privacy... *

  Sorry, im just of knowledge about computer hardware.  you say that I should try a different agreement or another port to plug in?

  I tried to connect on a couple different SATA ports on the motherboard.

• USB connection to the desktop

  Hello world

  I tried to get a similar but empty post came.  Here's the scenario.  There is an application on the device and an application on the desktop.  They communicate via USB which works very well for most.  I use:

  (StreamConnection) Connector.Open ("comm:USB; channel = "+ name);

  to save the channel of the device to connect to the desktop computer.  Once the two are connected, I can read and write to streams.  The problem is in the time between the opening of the connection and the connection actually put in place.  The application of device cannot be upward to be listening to connections so it could be some time before the connection is established.  I can't be able to be informed of the connection be established.

  Is there a listener that I can use or call Connector.open in a way that would inform the code that the connection has been established?

  Thank you in advance,

  Jakub

  I'm not sure what you're asking here... but have you looked at the interface of USBPortListener?  It may provide what you are looking for.

• Whenever I open a PDF or Illustrator Adobe Creative cloud forces me to the connection and the software license. What's supposed to happen? I thought that once I had the license I could use it without that irritating delay.

  Whenever I open a PDF or Illustrator Adobe Creative cloud forces me to the connection and the software license. What's supposed to happen? I thought that once I had the license I could use it without that irritating delay.

  Can anyone throw any light on this issue?
  Thank you.

  Robert

  Robert, you can check: https://helpx.adobe.com/manage-account-membership/cc-reverts-to-trial.html .

  Please let us know if you need help with this.

• I have a 4th generation iPad and the display is damaged. I bought in the States, but I'm not living there more. I live in the Brazil. What should I do to have difficulty here in the Brazil?

  I have a 4th generation iPad and the display is damaged. I bought in the United States, but I'm not living there more. I live in the Brazil. What should I do to have difficulty here in the Brazil?

  damage to the screen is not covered by the warranty - see if this offer your answer > https://www.apple.com/support/ipad/repair/screen-damage/

• Satellite P10 PSP10E shutdown and the light stays on

  Hello

  I'm having some problems with my old man (2004) Satellite P10 PSP10E-0SCM7-FR

  One day he simply closed (as if power, no BSOD) and the power and the led for WIFI and the CD/DVD button remains lit.

  Most of the time I can't activate it under as the power button is still on. (Power button, WIFI, and CD/DVD are on).

  I tried to remove the battery and unplug the computer for at least 30mm
  I tried to press the Start button for a period of time (one minute) then disconnect everyting (battery and power cord) at least 30 minutes before to turn it back on
  I have reinitialzed the computer using history CD provided with the computer
  I removed the radiator cleaned as well as the fan and then replace a new thermal grease
  I changed the memory

  Yet I still have the same problem, for some reason, the computer simply shutdown and the light stays on. Occasionally, the power light start, and I am able to restart the computer. But I'm unable to understand what makes the computer is shut down, or when that happens, what makes the power light turns off and make it possible to start the computer again.

  No idea what's going on?
  The Start button / stop and led market would be an error message?
  If so, what that means?

  Any help is very appreciated. Thank you!

  Damien

  lighting even when taking the battery and unpliging for a while (30mm in an hour)

  Hello

  Usually, books closed due to the high temperature and in this case, the unit must be disassembled and cleaned professionally, but it seems that you already have what I read in your post above.

  Probably its a motherboard problem.
  The RAM modules appear to be checked and is not RAM issue.
  So problem mobo is possible

• How do another firewall my default firewall? I have to start firewall CA every time I connect and the firewall Windows will are also not activated.

  How to make another firewall that windows firewall my default firewall? I have to start firewall CA every time I connect and the firewall Windows will are also not activated.

  Hello

  • What version of Windows are you using?

  You can check this link:

  http://Windows.Microsoft.com/en-us/Windows7/Firewall-frequently-asked-questions

• In the Internet properties and connections and the local network settings, I uncheck the box for a proxy server, but in a few moments, the computer checks the box

  In the Internet properties and connections and the local network settings, I uncheck the box for a proxy server (because it is blocking my access to Internet Explorer), but within moments, the computer checks the box. What can I do to stop the area of the check proxy server box?

  original title: LAN settings

  Have you checked for viruses?

  http://www.eset.com/us/online-scanner/

  It is very common that the virus to do.

• notification area: How can I get my internet connection and the life of the battery and its return in the notification area

  How can I get my internet connection and the life of the battery and its return in the notification area

  on the bottom right of my screen?

  I tried the properties and to add notifications but it net let me add them...

  Hello

  1 Please reboot nothing so interfere with this process.

  Click with the right button on Taskbar - Properties - tab Notification area - check box Volume - if it is grayed out
  Then, use this link. (The battery is the same method.)

  How to enable or disable the system tray in Vista icons (there are several methods
  and you can to use them all).
  http://www.Vistax64.com/tutorials/106787-notification-area-system-icons.html

  If necessary: a Mr Fixit

  System icons do not appear in the notification area in Windows Vista or in Windows 7 until you
  Restart the computer
  http://support.Microsoft.com/default.aspx/KB/945011

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Photoshop CC was supposed to be able to use without an internet connection if I worked online at least once a month...  I tried to work offline at home after working online for a while. The sign came and said ' no Internet connection /- and the options we

  Photoshop CC was supposed to be able to use without an internet connection if I worked online at least once a month...

  I tried to work offline at home after working online for a while. The sign came and wrote

  «No Internet connection / - and the options have been - try again or continue offline "and I could not work no prob. by choosing «continue in offline mode»

  However, I've used photoshop for a few hours yesterday and I brought my laptop home from my photographer friend to share the work of editing... and I couldn't open Photoshop.

  "The network is not connected TRYagain.

  It was the only option, does not allow me to continue offline...

  You have an idea why I couldn't?

  An Internet connection is required the first time you install and your creative Cloud of license applications.

  You can use the applications in offline mode, but must be online from time to time to validate your software licenses. Please see this link for more details: CC help | Creative cloud / Common Questions

• recently, I intend to download, but unfortunately this is already more than 5 attempts. Thanks to the slow connection and the power outage, my download has failed to complete. Would it not possible to download the app again? Concerning

  Recently I wanted to download, but unfortunately it's already more

  only 5 attempts. Thanks to the slow connection and the power outage, my

  to complete the failed download.

  Would it not possible to download the app again?

  Concerning

  A trial version is not different from the full version.  Using your serial number to activate a trial version, the access limit is removed.

  If you get access errors thrown at you when you try to use a download link, check that you have enabled cookies and clear your cookie cache.  If he continues to not try to use a different browser.

• Pavilion slimline s3760in: usb ports and the Internet connection

  Hello

  I use my hp pavilion slimline s3760in pc for about five years. Recently my hard drive failed and I had to replace.

  Everything was going well until my pc stopped recognizing all the same usb ports in BIOS mode on many occasions (he only recognized usb keyboard sometimes). Finally I have reset factory. The Usb ports now generally work fine, but now when I connect to the internet, none of my browsers can disply any page, even other programs cannot connect to the internet, although it shows that I am connected to the internet.

  Is it a hardware problem or just windows?

  Hello again @vr46,

  Thank you for the updated information. I'm you provide a HP support document: Broadband Internet Connection to a dispute (Windows Vista), which has the troubleshooting steps you need to solve the problem you are now facing. I suggest that you take the time to go on the document and apply the suggested steps.

  Please re-post if you need extra support. Thanks for posting on the HP Forums. Have a wonderful day!

• I can't seem to Windows wireless on Lenovo laptop to recognize a USB connection and turn on the wireless radio.

  I use a USB connection to my mobile phone for my internet connection. I want to use wireless mobile radio to connect other devices, but the window wireless services does not recognize that I am connected to the internet. What can I do here, gurus?

  Hello

  Please contact Microsoft Community.

  1 have you checked the State of the wireless autoconfiguration WLAN service in the services window?
  2. do you have any security software installed on the computer?
  3. have you made changes on the computer recently?
   
  We will first try to manually start the wireless service, i.e. the WLAN AutoConfig service. To do this, connect to the computer as an administrator.
  1. Click Start, type services.msc and press to enter.
  2. Locate the autoconfiguration WLAN service, double-click to open its properties window.
  3. on the general tab, change the startup type to automatic and click on the Start button.
  4. click on apply, then ok.
   
  Try to connect to the wireless connection and check the result.
   
  If the service still does not start, run the System File Checker tool to scan the computer for the corrupt system files and automatically correct. To run a sfc scan, try the steps mentioned in this link: http://support.microsoft.com/kb/929833
   
  For more information on the wireless settings, see this link: http://technet.microsoft.com/en-us/library/bb878035.aspx
   
  Let us know the result of the above troubleshooting steps so that we can discuss in detail and help you further.

  If the problem persists, proceed from the link below to fix this problem

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-81&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Reply to the post with an up-to-date report of the issue so that we can help you further.