CyberLink PowerDirector is unable to update on the g7-2215dx Pavilion

Similar Questions

• I'm unable to update to the new version, "refusing to proxy server connection.

  I am running version 3.6.3 right now and I was not able to do the latest updates updated, because once that I go through the download process and to launch Firefox I get the message "proxy server refuses connections please try again later, and I'm unable to access the internet unless I redo the 3.6.3 installation.» Anyone who has the magic answer would be great, because I have to go through this process every day when I get on my laptop...

  If you were using Firefox 3.6. 4 or higher, a new preference has been added to the preferences of the proxy connection settings in tools > Options > Advanced Options > > tab network - connection = settings = use system proxy settings

  If you do not select no proxy and restart Firefox your problem should be solved.

• Unable to update via the App Store system software or download

  Hello

  (I'm new to this forum and hopefully the below is enough for others to understand my problem)

  Since I have my Macbook Pro I have a huge problem for updating the software via the App store or by

  Download the files of the Apple update supports pages (for example osxupdcombo10.11.2.dmg).

  The ONLY way for me to update the software system is through resettlement (command-R during the boot process) of the

  system via the web, which i, in my case, a procedure of 5 hours each time.

  In the appstore, the need for updates is displayed, but when I click on the respective install button, the installation requirements

  are briefly "calculated" for 2-5 seconds, then the process stops without having to install anything.

  When I download the .dmg on the support page file, I can convert it to a .pkg file and start the installation. The process is running

  me through the entire list of subjects required to install (accept the terms, select the location to install etc etc) asks me to restart... but then

  nothing happens / past: the old version of the system continues to operate my MacBook. Using the procedure for re-Setup "command-R-Start-up.

  whenever I have slowly migrated to Yosemite to El Captain lion (now at 10.11.2), but it's certainly in the right way.

  I have been in contact with the local (German) Apple support hotline. They even have access to my computer to watch what I'm doing and how my problem

  If displays on the screen, however, could not help and promised to call back by the technician never happened.

  Recently, I was able to solve a problem of not being able to remove all the cards in 'Contacts' following a detailed recipe posted by Linc Davis in this forum.

  So I thought that Linc or someone else in the forum could help me with my problems of update.

  Thanks in advance

  PETERBBERLIN

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Click on the clear view icon in the toolbar. Then take an action that does not work the way you expect. Select all of the lines that appear in the Console window. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name or e-mail address, can appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• Unable to update to the latest version

  Currently, I have the version 0.5.16.16 xD and love it!

  I noticed that there is an update which has posted September 26 (version 0.5.22). I checked the updates, and it says I have the latest version.

  However, it doesn't have the new features listed (control lock ratio, zoom on selection, preview live on devices).

  Is there anything I can do to force and up-to-date? Any thoughts?

  Thanks in advance for any help.

  Thank you elainecc.

  I uninstalled XD my computer (the first time I kept the preferences) and when he returned, I always said 5.16.16. The update came across an error.

  So I uninstalled for the second time, this time by deleting the saved preferences. After the re - install he did come up with a new version automatically (0.5.22.8). I was ok with screw up my preferences saved, but I can't say the same for others.

  about who it has installed, our IT has installed the first version. I'm not familiar with the way they did (logged as admin, then installed for my vs user logged in as me and installed for me).  They have also installed other CC apps like photoshop, Illustrator, InDesign and Dreamweaver. I'll keep an eye now for these last and let you know if I have similar problems (certainly don't want to trash the preferences)

  Thank you for your support and anyone who helped you behind the scenes. 10 out of 10 on service to the customer for me!

  -Frank

• Impossible to publish the site on the BC update after Muse to 2015.2 - error 400 [was: unable to update to the BC 400 error]

  The new update out Muse does not work well, I can't update my website in BC, error 400. How can it help me?

  Already a discussion is going on in this thread by the product team - MUSE of the publication settings of BC lost after upgrading 2015.2

  I suggest that you stay in control of this thread as well.

  Meanwhile, I also try to collect more information about this.

  Thank you

  Ankush

• Update of the screen HP Pavilion Sleekbook 15

  Hi all, I have a Hp Pavilion Sleekbook 15 b-045el

  This device has a TN BrightView 1366 x 768 screen, I wanted to know if its possible to improve it by using for example:

  15.6 touchscreen "1366 x 768 of the Touchsmart from Hp Pavilion Sleekbook 15

  The connector is compatible? I will earn touch capabilities?

  Or for example a 1600 x 900 15.6 "display from another HP laptop? (I know FullHD needs pins too so that it will not work)

  Thanks in advance for the help

  Hi 89luca89,

  Thank you for visiting the Forums HP's Support and welcome. I read your thread on your HP Pavilion Sleekbook 15-b045el and replacing your BrightView screen. Here is a link to manual page 27 The only part of HP is 35.6 cm (15.6-inch), HD, WLED, SVA BrightView display panel 701688-001, so I have to say, it won't work. If it has third party screens, you will need to check that online.

  Thank you.

• Why the iphone 4 is unable to update version? Latest version 7.1.2

  Why the iphone 4 is unable to update version? Latest version 7.1.2

  because the material is too slow

• iOS 10: unable to update the applications due to Conditions General timeout

  I updated my iPhone 6s to iOS 10 a couple of days and now seem to be unable to update applications. The issue seems to stem from a prompt to read and accept the new "Apple Media Services terms and Conditions." When I click the button to proceed with conditions, a new empty window appears and then things churning just until the request times out (see photos). The same thing happens when I click on "View the apple ID" in the app store or through settings, even if in this case the terms guest does not appear and it charges only up to the time limit. It seems to me that the problem lies in the redirection of the terms of apple. Anyone who has experienced this since the update or does anyone have advice?

  I already tried things:

  -force settings, closed and app store

  -restart the phone

  -disconnected and signed apple ID (this feature works in the app store and the parameters)

  -tested 'show apple ID them' on the phone to my wife (6 s on the same wifi network), successful but the phone still is iOS 9

  -tested "show the apple ID" via iTunes with my macbook, successful and I seem not to be invited to accept the new conditions

  Thank you!

  

  Post edited by: cstrand_apple
  Added pictures and corrected typos

  The issue seems to have resolved itself. The terms and conditions page is loaded and now updates are allowed. Just a temporary problem, I guess.

• I could not update or install applications for weeks, so I disconnected my Apple ID and rebooted the phone but now I can't reconnect! The error is: unable to connect to the iTunes Store. I should w8 for ios10 and hope that it will be fixed by the new ios?

  I could not update or install applications for weeks, so I disconnected my Apple ID and rebooted the phone but now I can't reconnect! The error is: unable to connect to the iTunes Store. I should w8 for ios10 and hope that it will be fixed by the new ios? Cause don't want to reset my phone.

  You have tried: If you can not connect to the iTunes Store - Apple Support ?

  And I tried to do a soft-reset/reboot the phone?

• Unable to update to Version 10.2.3 of the CPF

  I have an Imac (mid 2011) running the OSx Version El Capitan 10.11.6. Have bought a legitimate copy of Final Cut Pro X on the Apple Store in July 2011, I am now unable to upgrade to the latest version of the software (10.2.3). The computer showed that he had downloaded the new version of the apple store update screen and showed that she had completed the installation with absolutely no errors, but when I tried double clicking the icon of Office & FCP X loading, it shows again that it loads the 10.1.4 version (old version I already had)? It also shows the 10.1.4 version when I click on the shortcut menu and click ON FCPX? I really want the new update. Can someone help me with this please? Thank you.

  Do you have other copies of the application on another partition or drive? If this isn't the case, move the application to the trash and try to download it again.

• Unable to control upgrade: an error occurred when checking for a software update, and the only option is to cancel or retry...

  I bought this iPhone 6 + about 4 weeks ago, today, I saw that there was an iOS updated 9.3.3. I was able to update my iPhone to work 5 sec, but not my iPhone6 +. I don't have a phone to jailbreak and current iOS is 9.3.2.  I googled the question and I tried these:

  1. You can try to update your software via iTunes. Your software update may fix this problem.

  2 settings > Wi - Fi and turn off Wi - Fi, and then click New.

  3. restart your iOS device.

  4 reset network by tapping settings settings > general > reset > reset network settings.

  5. change your DNS settings. To do this, simply tap Settings > Wi - Fi, then tap the blue arrow next to your existing Wi - Fi network. Press the 'DNS' field and enter the DNS servers; 8.8.8.8, 8.8.4.4 (Google Public DNS). After that, try a software update.

  I tried these that none worked.

  Thanks for the help in advance!

  Kimlynusa

  Kimlynusa wrote:

  I was able to update my iPhone to work 5 sec, but not my iPhone6 +.

  Why were you unable to update the iPhone 6 +? What happens when you try? You receive an error? If Yes, what is the exact text of the error?

• Unable to connect to the internet update version

  I've updated to the latest version 35, but since then, the browser seems unable to connect to the internet. I thought it was my firewall that was blocking the program. I did what was suggested to work around this problem, that is, to remove my firewall and then add it again. But it does not solve the problem. There is nothing wrong with my internet, how am I be able to connect to internet by using IE or Chrome. And I was able to connect to the internet in the previous version of Firefox. Unfortunately, the new updated version is not allow me to. Have no solution?

  It is possible that your security (firewall, antivirus) software blocks or limit Firefox or the process of plugin-container without you inform, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox and the plugin-container in the permissions list in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.org/KB/server+not+found
  • https://support.Mozilla.org/KB/firewalls

• Unable to connect to the software update server (127.0.0.1)

  I'm under El Capitan 10.14.4

  I'm unable to view or download from the App store apple updates. Everything else in the app store works fine except the updates and the updates, I get 3rd party updates, but nothing from apple. If I click on updates at the top of the app store icon I get the following error

  

  Troubleshooting steps I went through far

  • I restarted my mac a few times
  • I did some research on Google and messages more speak of iworm, fortunately I could find no trace of an infection by the worm, I scanned my machine using Sphos and ClamXav and haven't found anything relating to iWorm. I am also unable to find all the files, he leaves behind him, so I think I'm safe in this regard.
  • I checked the hosts file and there are no entries that should not be there, hosts file is copied below.

  # Database host

  #

  localhost # is used to configure the loopback interface

  # When the system boots.  Do not change this entry.

  ##

  127.0.0.1 localhost

  255.255.255.255 broadcasthost

  : 1 localhost

  • The /var/log/install.log which appear relevant lines are;

  May 26 09:44:02 macbook-pro softwareupdated [435]: SUScan: Scan for pid 435 client (/ System/Library/CoreServices/Software Update.app/Contents/Resources/softwareupdated)

  May 26 09:44:02 macbook-pro softwareupdated [435]: SUScan: out of time scan = 0.2

  May 26 09:44:02 macbook-pro softwareupdated [435]: SUScan: error in scan: error Domain = NSURLErrorDomain Code =-1004 'unable to connect to the software update server (127.0.0.1)." UserInfo = {NSErrorFailingURLKey =http://127.0.0.1/content/catalogs/others/index-10.11-10.10-10.9-mountainlion-lio n-snowleopard - leopard.merged - 1_disabled.sucatalog, SUCatalogFetchOverrideURLString =http://127.0.0.1/content/catalogs/others/index-10.11-10.10-10.9-mountainlion-lio n-snowleopard - leopard.merged - 1_disabled.sucatalog, NSLocalizedRecoverySuggestion = check that your network connection is working normally.} {If there is no problems with your connection, contact your network administrator for assistance., NSLocalizedDescription = can connect to the software update server (127.0.0.1)., SUErrorRelatedCode = SUErrorCodeScanCatalogNotFound, SUErrorUpdateServerName = 127.0.0.1, NSErrorFailingURLStringKey =http://127.0.0.1/content/catalogs/others/index-10.11-10.10-10.9-mountainlion-lio n-snowleopard - leopard.merged - 1_disabled.sucatalog, _kCFStreamErrorDomainKey = 1, _kCFStreamErrorCodeKey = 61}

  May 26 09:44:02 macbook-pro softwareupdated [435]: Scan received the error unable to connect to the software update server (127.0.0.1).

  May 26 09:44:02 macbook-pro softwareupdated [435]: updates marked ramps

  • I can ping swscan.apple.com and she is resolved to 17.164.1.22 which is the same IP that also resolves the mac next to me (which gets the update)
  • I cannot telnet on port 443 to swscan.apple.com and it connects.
  • I have a mac in yosemite next to me who can see the updates so I suspect that doesn't pose any problems with the service itself rather something on why machine.
  • I started in safe mode, and while in safe mode, I get the same error.

  I am at a complete loss what to do next short of wiping and restore from a time machine backup, can anyone help please

  You can try to disable the Sophos websheild and ClamXav if she has one. Even better would be to uninstall both and test.

  FWIW, it is never a good idea to have 2 av programs installed.

• Friends hahaha... I'm unable to re - activate my iPhone 5 years after updating to the latest version of OS i forgot my Apple ID. I know the password ID Apple and iPhone lock code. Also its my fingerprint reading. Unfortunately the option "Find my iPhone"

  Friends hahaha... I'm unable to re - activate my iPhone 5 years after updating to the latest version of OS i forgot my Apple ID. I know the password ID Apple and iPhone lock code. Also its my fingerprint reading. Unfortunately, option "Find my iPhone" is active... Could someone advise me please how can I reactivate my iPhone in this scenario?

  https://iforgot.Apple.com/password/verify/appleid#! & section = appleid

• 'Unable to connect to the server' after updating to iOS 9.3

  After updating my iPhone 6 more for iOS 9.3 I get the message "unable to connect to the server. I can't connect to iCloud more!

  It's your phone antivirus. If you have an application like 'disconnect' you must remove it and then you can connect and reinstall.