CyberLink PowerDVD does not recognize the bluray DVD (Pavilion g6 2269wm, windows 8)

Similar Questions

• S5-1060 casing dvd player does not recognize the Bluray disks after you restore windows 7

  I have a s5-1060 casing with a HP DH12E3LH bluray player, recently the computer was so I took out the restore disks and just do a fresh install of windows 7, it works fine now, BUT the only thing I can't understand is why my bluray in unity player not to see, recognize or play blurays now.

  The Device Manager shows the best drivers are already installed (21/06/2006 microsoft 6.1.7601.17514 driver), and he will play CD, DVD, just does not recognize a bluray disc.  I might say, we watched top of 25-30 movies on it so I 'hope' is not burned or something altogether.

  It indicates that the device is working properly in Device Manager he calls it a cdrom drive (not sure if it matters), but with a bluray in the drive, it shows under properties / status / no media in the drive.

  I'm not really sure where to start on this, drivers seem strange to be so old, is it a firmware I can update if so where can I get that info, I went to the hp site let it detect the computer saw the driver updated but nothing which was directly related to the cdrom drive.

  Thanks for any help on this just stumped at this point, as it was working before the full restoration to the computer using the recovery disks, then there must be something simple.

  Hello FTLOSM,.

  I understand that after making your computer your Blu - ray discs won't play in Windows 7. I'm you provide a document from HP support: solve the DVD and Blu-ray movie problems (Windows 7) that will guide you through the troubleshooting steps to resolve this problem. I would focus on the topic impossible to watch movies in Blu-ray 3D. I am also you provide the link to the Drivers of HP Pavilion Slimline s5-1060 desktop PC page.

  I hope that I have answered your question to your satisfaction. Thanks for posting on the HP Forums. Have a great day!

• Satellite C650 - 1 CT does not recognize the CD/DVD

  Hello

  I currently have a problem with my model Toshiba C650 - 1 CT (PSC08E-03M001EN) satellite. The laptop does not recognize the CD/DVD and a check in the "Device Manager", said a damaged device driver!

  Now, my problem is that I searched on the internet and also on the websites of Toshiba for the right driver, but no use. The device (DVD) opctical no not also appears in the list of devices 'removable '.

  System details:

  Satellite C650-1 CT PSC08E-03M001EN
  OS: Windows 7 64-bit
  Place/country: United Kingdom

  Assistance in finding the right driver or advice how to solve the problem will be highly appreciated.

  Thank you
  Lamin

  Post edited by: jammehkunda

  As first step try please remove the optical disc drive from Device Manager and restart your laptop.
  After doing this review please the Device Manager and let us know if the problem persists.

• Satellite 1900 (PS192E) - does not recognize the CD/DVD

  Hey all,.

  I just bought a Toshiba Satellite 1900 (PS192E) and place an old 20 GB HDD from an old laptop.

  When I boot, the screen is in VGA 16 color mode, it recognizes the DVD player, but does not recognize the CD/DVD when inserted. I tried to install and run the utility "driver robot" Toshibas, but the display is such that I see all of the screen to start the search.

  If there is someone out there who could give me some advice, I would be extremely grateful.

  Thank you very much

  James

  Hello

  OK, you have installed the disk HARD of another laptop but too format the HARD drive? I mean if the HARD drive performed from another laptop, you need to reinstall Windows because now you have other hardware installed.
  What version of Windows is it?

  If you want to install a driver for the graphics card go into Device Manager and select Update driver.

• Computer does not recognize the CD/DVD drive

  For these last days, my computer does not recognize the CD/DVD drive.  I have tried everything - publishers of registry, check the physical connections inside the computer, the system restore and install Fix - It programs.  However, the computer does not recognize this drive.  I also wonder if it is a hardware problem.  The light on the drive is a constant in green, and does not have the Open button.  And when I use the bent-paper-clip-in-the-little-hole and can open the drive, it will not read the disc.  Please advise...

  I fixed my problem with the BIOS operating system & not recognizing not not my DVD player to reinvest the solder on the motherboard.  You can find instructions on how to do it here: http://www.computerrepairtips.net/how-to-reflow-a-laptop-motherboard/

  There was a little crazy with my video drivers when I started first, but everything works after resetting the BIOS by default.

• Dell Inspiron 17R does not recognize the cd/dvd drive

  I have a laptop Dell Inspiron 17R and sometimes it does not recognize the cd/dvd drive!

  I tried to update the drivers with the system after the update, Dell detects the cd/dvd drive appeared in my computer and in Device Manager, but after 20 minutes, there was no. Any suggestions how to solve this problem?

  Thanks in advance!

  Hello

  See if that helps you.

  There is a "Fix - it" Microsoft for your problem on this link

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  If above doesn't fix it, continue with the help of Microsoft:

  http://support.Microsoft.com/kb/982116/en-us

  See you soon.

• Satellite A205: Vista & BIOS does not recognize the CD/DVD drive

  After a crash of the sudden family Vista system premium on a Toshiba Satellite A205 the system does not recognize the DVD CD - RW drive. Neither in Explorer, Device Manager, nor BIOS.

  Laptop is only a few months old.
  Have you tried the Toshiba check system - it ignores DVD disk check.
  Tried Windows Update - does not help.
  Tried registry fix - does not help.

  Cannot use the CD to reinstall all drivers - because it is not recognized.
  The DVD drive LED is on. If the disk looks ok physically.

  Does anyone have an idea what to do?

  Very strange what s
  Try this:

  Access the BIOS and set the default settings and save the changes.
  If it doesn't help then I put t see any other possibilities for contact ASP in your country for a CD/DVD drive control and possibly a replacement

  You said that the notebook is only several months old so I assume that the warranty is still valid and that's why everything has to be done for free

  Good luck my friend

• My laptop does not recognize the cd/dvd drive, gives the error message 19 and cannot load/reload driver TSST. Any suggestions?

  Device Manager says: "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged (code 19).»  Mr. Fix - it (Microsoft) indicates the CD/DVGW TSSTcorp TS-L632M ATA Device drivers & filters are corrupted or damaged.  Mr. Fix - it could not download the updates/drivers for TSST.  Mr. Fix - it has been able to get the computer to recognize, but unable to take the function of CD/DVD.

  Hello

  Perform the following methods and check if it helps.

   

  Method 1:

  Please run the difficulty of following article and check if that helps.

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

   

  Method 2:

  You can read the following article to see what might cause this problem.

  When you insert a CD or a DVD, Windows Vista may not recognize the disc

  http://support.Microsoft.com/kb/939052/en-us

  If you had recently upgraded the computer to the Vista operating system or install the Service Packs, then try the steps as described in the following article.

   

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista

  http://support.Microsoft.com/kb/929461/en-us

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

   

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756/  

  Hope this information is useful.

• Windows vista Manager or the device does not recognize the cd/dvd drive

  I have windows vista and it is not recognize my cd/dvd drive. When I click on my local drive (c :)) and recovery hp (d) shows up, I checked my device manager and nothing shows here either for my cd/dvd drive, so I checked the cable but it looks fine.) checked the files of the upper and lower register, but that fact so I just bought a dvd burner external made by polaroid that is USB2.0 and supposed to be plug-and-play, but when I connect it nothing happens nothing. the power turns on two cd players and the disc starts to spin but it stops after 15 seconds and I get nothing. I am confused and don't know what to try. Please help thanks. so I tried to use the running microsoft dvd set and the message I said 'dvd cd drive not detected '.

  I tried these steps with no luck

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Hello mike salinas.

  1. you have any third-party burning software installed on your computer?

  2. have you checked if the external CD drive works on another computer?

  I suggest that you check if your internal CD-ROM drive is detected in the BIOS.

  Usually, you must press a key (for example, F2, F12, DEL, ESC) or a key combination whenever you turn on your computer, but before I get to the BIOS to start Windows. Check to see if there is the CD/DVD drive in the BIOS.

  You can see the article for more information about the BIOS:

  http://Windows.Microsoft.com/en-us/Windows-Vista/BIOS-frequently-asked-questions

  Regarding the external CD/DVD drive, I suggest you see if it works on another computer.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Satellite C series does not recognize the CD/DVD drive

  Hello

  I have about a week he did something wrong and now my laptop recognize my CD-Rom drive.
  I guess I accidentally deleted the driver but I'm not sure of (I'm not a computer expert).
  What now? Someone has an idea?

  Thank you!

  Carina

  + The message was edited: translated by Google Translator.

  Hello

  I guess that you do not see the CD/DVD drive in MY computer area.
  Right?

  I think I can help you
  First go to Device Manager and search for CD/DVD drive.
  Select this device and delete it from the list.

  Now, open the registry (type regedit in the search) and remove the filters above and below to the following registry key:
  HKEY_LOCAL_MACHINE \SYSTEM \CurrentControlSet\Control \Class \{4D36E965-E325-11CE-BFC1-08002BE10318}

  The similar solution is located on the Microsoft page:
  http://support.Microsoft.com/kb/314060

• ESXi does not recognize the cd/dvd on HP DL380

  I'm new to the hypervisor and really need some advice on a DL 380 I put up as a box QA. After installing ESXi 3.5, I created the virtual machine I need and proceeds to start a virtual machine, but was surprised to see that the server does not see the CD drive? I guess that would not as surprising, if it's a customized version white box, but a HP DL380, only one of the most common servers in the world?

  Anyone has any advice or suggestions about what is a hotfix for this.

  Thank you

  Robert

  In addition, once you can convert many of your applications and or OS installs in ISO format, you can just use your Infrastructure Manager client and connect an ISO to some VM you must have a 'CDROM' inserted in to.

  For example, if you install Citrix and you have an ISO copy locally or on your network, you can simply start the virtual machine and then click 'connect/disconnect devices on CD' point to your ISO image. VMWare then moved the 'CD' for the virtual machine and it will be accessible as would a normal CDROM.

  When you do that, your local CDROM in the ESX box really is not used for a lot more outside upgrades to ESX 3.5, and even what is done remotely today for ESX 4.

  Hope this helps

• Satellite Pro A60 does not recognize the accept/DVDs blank

  My computer will not accept blank CD - R disc so I can burn data on them, but my computer will not accept blank DVD discs that I want to be able to use to store more data.

  In the drive of my computer D reads "DVD - RW", I guess so, but am not sure that this means that my pc should be usable with DVD-R and DVD - RW discs but it do not accepts / acknowledges these when I put a try to burn something on them.

  My computer also does not accept / recognize DVD + R Virgin discs as I have tried those, just in case they might work.

  Help please!

  Post edited by: EDS

  Hello

  Have you also tried to burn DVD-R discs?
  I had also some problems with DVD + R discs, so I changed to a DVD-R and since all works well! :)

  I don't use Windows Media Player to burn discs, I use CD Burner XP. It is a freeware tool, very small and fast. It works on most versions of Windows, and you should try it too!

  Also check the Toshiba page for an update of the firmware!

• Satellite P50-B-103 - Cyberlink Powerdvd does not install the update from Toshiba

  So I have an update for my toshiba Satellite P50B-103 for "cyberlink powerdvd" and it does not install, just to unpack and does nothing.

  I left the laptop to operate for about an hour to see if anything installed but it does not, what to do?

  Are you talking about the video player updated v 6.1.2.1 - A available on the Toshiba UE driver page?

  It is an update and requires the Player preinstalled (full version).

  After downloading, you will need to unzip the package (vidpl-20140813100353)
  Then, in the vidpl-20140813100353 package, you will find the TC30704300A.exe file.
  It is also a zipped folder. Right click on TC30704300A.exe and extract the files.
  After that, you will get the TC30704300A containing various additional files where you can start the update process.

• All of a sudden my laptop does not recognize the cd/dvd drive.

  Just today my cd/dvd drive is not recognized. My laptop is HP Pavilion dv6244us, Vista Home Premium software. The cd/dvd drive is only a factory with LightScribe. In Device Manager there is a yellow! next to the name. When I double click on it, it says what follows in the device status area: "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) "I'd appreciate any help you can give.

  Thank you

  Chris

  Hi Chris,

  First, try the automated Microsoft fixit at the link below.

  Vista

  Check if the drive works now.

  If it still does not work, click on the Menu start, open the all programs, open accessories, right-click on command prompt and select "run as Administrator".  In at the prompt, type the following command and press ENTER.

  sfc/scannow                (Note that there is a space between sfc and /)

  Let the entire process, then the output type and press ENTER.

  Then, click on the Start Menu, open Control Panel and click Device Manager.  Click to open the CD/DVD-ROM drives.  Right-click on the drive and choose uninstall.  Do not delete if requested drivers.  When the device has been uninstalled click the icon 'Search for hardware changes' (usually just below help in the toolbar).  Let windows reinstall the disc and see if it works now.

  Kind regards

  DP - K

• Sdatellite M100 does not recognize the CD/DVD drive in Windows XP

  It is listed in the Device Manager, but with a yellow explanation mark.
  No mention of this in my computer.
  No icon.

  I am able to open the drawer and I put several types of cd/DVD in them without any result.
  The light flashes in orange on the door. The drive is listed as "Mat * advd-ram uj - 841 s-(sm)" in the bios under boot devices.

  I'm trying to figure out how to remove the drive and reconnect but it seems that I have to disassemble the thing to do and hesitate without a diagram.

  It is only a user guide in the downloads on this site so any help is appreciated: 0)

  Oh, I also downloaded the driver from this site for the drie. Before that, I uninstalled the drive in Device Manager, but there was no change when I installed the downloaded driver.

  Simply using a Ubuntu Linux live cd and it is running.
  Unfortunately its going to be hard to know for sure what the problem in this way because I don't want to install ubuntu on this machine it is someone elses machine and they are far from would you like to try linux.

  I'm in a live session now.
  Ah ok when I go in the media folder there is no mention of the cd/dvd drive.

  It is really a problem unless I can unplug physically the Mo and reconnect: 0 (Oh wait here it... is under 'cdrom' folder ' but only files with a relevance to the side by side with windows installation are mentioned... exe files, wubi etc..)

  Ah ok that's beyond my experience.
  Can someone give this amateur a tip?

  First remove the player of ODD (CD/DVD) from the list in Device Manager.
  Then access the registry and delete the Upperfilters and Lowerfilters completely from the following registry key values:

  HKEY_LOCAL_MACHINE \ FAT32\ CurrentControlSet \ Control\Class {4D36E965-E325-11CE-BFC1-08002BE10318}

  Finally, you must restart the device.

  Once again, windows will recognize the STRANGE