D: and E: is not accessible after installation of Windows 7.

Similar Questions

• Trackpad and keyboard does not work after upgrade to Windows 10

  Trackpad and keyboard do not work after the upgrade to Windows 10 in Boot Camp on a MacBook Pro in early 2011. So, I'm unable to enter password. How to connect? Can I go back to Windows 8?

  1. you can turn off your Mac and your power it back up and hold the Alt/Option key.

  2. you can also run the following procedures to restore the OS default.

  3. If you use a Mac 2010 to run W10, officially Apple does not support the combination. Older than 2012 Mac is not supported for the W10.

  4. Please see also Boot Camp: the operating system default value .

• Windows vista activation problem product ID and Java (0xc0000005) fatal error after installation of windows vista format.

  Original title: try to put wrong question ID problem!

  Due to problems of Java, I formatted and made a new installation.  My Vista Home Premium says its active.  When I try to put my product id was not found. When I try to leave microsoft to find that they can't pick up my computer and I can't enter by hand, he said its incorrect.   When I try to ask online chat, I cut that they deal with activation problems.  It is activated, I can't get the Web site recognize my product id, so I can post for help?  The world is - that sound familiar at all?

  I have fatal routine Java errors when I play a game Runescape.  I'd appreciate any help anyone could give me. Thank you

  A fatal error has been detected by Java runtime environment:
  #
  # EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc = 0x6d884dca, pid = 3032, tid = 2976
  #
  # Version JRE: 6.0_30 - b12
  # Java VM: Java hotspot Client VM (20, 5 - b03 in mixed mode, sharing windows - x 86)
  # Problematic frame:
  # V [jvm.dll + 0x94dca]
  #
  # If you want to submit a bug report, please visit:
  # http://java.sun.com/webapps/bugreport/crash.jsp
  #

  Hi Verisetti,

  Have you installed security software after formatting windows?

  If so, you can uninstall the security software temporarily and check if you receive the access violation error.

  If the uninstallation of security software solves the problem, you may need to configure the settings of the software of safety accordingly. Please contact the software vendor for assistance in this regard.

  Note: Make sure that you install the security software after the trial.

  What about Windows vista product ID, you can try to validate Windows and check if it helps.

  For more information, see the following articles:

  What is the validation, and how does it work?

  Genuine Windows: Frequently asked questions

• My Windows 7 does not open after installation of Windows 8 Preview Release

  I have a laptop HP Pavilion g6 2004 TX. I had WIndows 7 Home Basic Edition.

  I created a 23 GB partition on my hard drive and installed WIndows 8 Preview Release on that by starting to dvd.

  WIndows 8 works fine. It gives me the option to choose between windows 7 and Windows 8 at boot.

  When I choose windows 7, HP recovery manager opens and asks me to restore the OS to a previous restore point.

  If I allow it, he does and asks to restart. After the restart, yet once he asks me to choose between Windows 7 and 8 to start. If 7 selected even once, the HP Recovery Manager does the same thing again.

  I can't open Windows 7 now. What should I do? Should I start Windows 7 recovery discs? He'll do anything for Windows 8? Need help as soon as POSSIBLE. Thanks in advance.

  Hello:

  The recovery disks will reinstall W7, but will remove, create new partitions (primary and recovery), and format the drive.

  This means that your existing installation of W8 is cleared, as well as your current installation of W7 and the recovery partition.

  I would recommend if you want to keep windows 8, just wait until the license expires and recover your PC to its original state by using discs of recovery at this time.

  Paul

• Vista system does not start after installation of windows update 10thFeb2010. Only start in safe mode. Windows Update does not open

  Updates to auto (windows Update) using.  Downloaded automatically update yesterday (10thFeb10) and when I shut my computer down it started to install them - as usuall.  However start my computer than this 11thFeb10 am and he began to run through regestry files when starting up.  Then it is impossible to load windows.  Just went to a blank screen.  Rebooted several times and were able to start it in safe mode.  Tried system restore but the same thing happens.  Obviously there was something to this update that 'changed' my computer and I'm not happy about it!  Also thought that there could be new updates (perhaps to fix the last update) but I can not even Windows Update to open it.  Tried online and he tells me that I have never downloaded updates and that none are available.

  I use Windows Ultimate x 86.  I hope someone can help me!

  Got a response from Ms.  Good all who have this problem - you have an ATI Radeon graphics card?  Driver is causing the conflict.  Uninstall all the stuff ATI goes on ATI web site and install the download of 'single driver '.  Reboot and then you can download and install other fancy programs that come with your graphics card.

• Error 1601, install shield is not accessible. Installation of Windows service has stop working.

  Original title: my windows service install abandonment of work may not have it installed at all do I need to reinstall win xp.

  service inst. Win does not install shield not accessible error 1601 cant install data files to dvd games cannot uninstall files I need help

  Hello
  before you try a complete reinstall, try to download from this page:
  http://support.Microsoft.com/kb/315353
  Let me know what happens
  b Eddie

• Software does not open after installation on Windows 7

  I have a Photosmart 6280 all in one and once the software is installed, the program will not open. Was on the phone with a guy from HP for an hour and he couldn't help. Time to work with Win 7. Anyone has any ideas. Done an uninstall and still does not. I like Win 7, but sure would like to get my printer working.

  Have you tried to install the latest drivers for Windows 7 and the software from the following link for your printer?

  http://h10025.www1.HP.com/ewfrf/wc/softwareList?OS=4062&LC=en&DLC=en&cc=us&lang=en&product=3194498

  In addition, when you mention that the software does not open, do you mean the HP Solution Center software?

  -------------------------------------------------------------------------------

  I work with HP, but these comments are my own and not from HP

• Multifunction HP LaserJet 1536dnf printers: Scanner function not accessible after upgrade to Windows 10

  Function non-contactable on printers MFP HP LaserJet 1536dnf of analysis after the upgrade to Windows 10.

  Here is the error message:

  

  I recycled the printer... inaccessible even

  I recycled the router and the printer... inaccessible even

  Worked fine before with Norton and Windows Firewall enabled on Windows 7.  so...

  I have disabled the Windows Firewall (but not Norton firewall)... inaccessible even

  I ran "SCF/scannow' with the command prompt... inaccessible even

  I ran HP Print doctor who says that the scanning software was not installed.

  I tried to download and install the software the complete solution... masse not installed properly... even inaccessible.

  Help, please

  HALLALUJAH!  Now, I can scan, fax and print.  I did not follow the directions of RnRMusicMan together.  I just deleted all the HP software that had to do with print and then installed the suggested software.  I do not close the firewall or do any of the other suggestions.  Other people with the same problem may have to follow all the indications made by RnRMusicMan above.  RnRMusicMan, THANK YOU for giving me the link for the correct HP software to solve the problem, HP LaserJet full feature software and driver.   Without your help, I would have not a scanner works on this printer.  I scan most all instead of filing paper.  I was in trouble when the sweep would not work. ... HP support is GREAT!

• Network not found after installation of Windows 7 hardware

  Add a SSD to a HP dv7 7030us for Windows 7 and other software, with data on the original HARD disk. After installing Windows 7 network hardware is not found, so I'm stuck in the water. Troubleshooting Internet connection problems not found no problem. Any suggestions?

  Use the computer that you are on now to get the network drivers for your laptop. Copy to a flash drive and install then from there...

• Keyboard and mouse do not respond during installation of Windows 7.

  navigation when installing win 7 without the keyboard and mouse

  I installed Windows 7 Home Premium on a new computer with P67 Pro3 motherboard and storage of 128SSD. I don't have the use of the mouse, although the keyboard works. (Good work). This is my first time building my own computer.

  I stood for "I accept...". "in the box before you click"next ".

  The clicking on 'enter' had worked up to this time to move the process forward. Now 'Enter' does not work, I tried a certain 'shortcuts without result. For me to accept the conditions to continue the installation. I checked the "keyboard Short cuts for windows, but I have not found one to solve my problem." There is no cursor on the screen.

  I'll be grateful for any help.

  E-mail address is removed from the privacy *.

  What is a wired or wireless keyboard?

  If it's a USB keyboard, have you tried other USB ports on the system?

  Also, try to boot into your BIOS and change the USB mode to legacy and see if the keyboard resumes.

• EXE files created with aggregator does not work after installation of Windows update KB3132372

  outputs .exe created using Adobe aggregator only white screen after that the latest patch for Flash Player has been installed. One of our sites publishes several of these courses next week. They are working on a plan B, where they will release output .swf aggregated, but it's not ideal. No work around available?

  This is the second time that the Adobe developers make this mistake.

  There are 4 years, what a flash update made a black screen to all EXE Captivate files. At the time the patch is a patch to Captivate and republish all courses after the patch. At the time my company was in its infancy and had very few customers and has sold only a few products. Today, we delivered thousands of products to paying customers. If the fix is proving to be the same it would be our company cost very expensive and probably paralyze our business.

  It is unacceptable that a company such as Adobe provides an update to Flash without testing on their platforms. I'm not sure how many of you are in the same situation as us, but if you are please feel free to contact me.

  I would like to start sending my clients email complaints and claims directly to someone who cared about Adobe, but this only works if a person didn't care.

  THIS PROBLEM MUST BE RESOLVED AS SOON AS POSSIBLE AND NOT ONLY NOT DOING HALF A * JOB LIKE LAST TIME.

• G4-1303AU of the HP Pavilion: HP my laptop works does not properly after installation of window 7ultimate 64-bit

  This laptop is provided by UP Govt (INDIA). I installed windows ultimate 64-bit, 2 days ago and installed all the drivers. But there are two pilots who is errors. These are some

  1)PCI device- ERROR IS- the drivers for this device are not installed. (Code 28)

  Hardware ID is

  PCI\VEN_10EC & DEV_5209 & SUBSYS_3564103C & REV_01
  PCI\VEN_10EC & DEV_5209 & SUBSYS_3564103C
  PCI\VEN_10EC & DEV_5209 & CC_FF0000
  PCI\VEN_10EC & DEV_5209 & CC_FF00

  2)Ethernet Controller- ERROR IS - the drivers for this device are not installed. (Code 28)

  Hardware ID is

  PCI\VEN_10EC & DEV_8136 & SUBSYS_3564103C & REV_05
  PCI\VEN_10EC & DEV_8136 & SUBSYS_3564103C
  PCI\VEN_10EC & DEV_8136 & CC_020000
  PCI\VEN_10EC & DEV_8136 & CC_0200

  My main problem is this laptop is hangig too permanently. I do not know what is the exact reason and how do I... Its heating not so it's null chance of warming... I want to get rid of this problem of hanging. Please give me link to download the real drivers and the solution for this problem of hanging... As it was not hangig earlier on Windows 7 Home Basic (provided by Hp)

  Hello:

  Here are links to the drivers you need...

  PCI\VEN_10EC & DEV_5209:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-103100-1&cc=us&DLC=en&LC=en&OS=4063&productOid=5280050&sw_lang=&product=5280049

  PCI\VEN_10EC & DEV_8136:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-100079-2&cc=us&DLC=en&LC=en&OS=4063&productOid=5280050&sw_lang=&product=5280049

  The only suggestion I can offer regarding the laptop works is not so good is to download and install the drivers for the chipset amd from the link below and restart.

  http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2064

• just paid for photo shop, items online and it will not open after I installed

  just paid for photo shop elements and it will not open after installation

  CC applications close immediately after the launch

• Microsoft LifeCam does not work after installation

  Software will not launch after installation.  Running Version 3.6 on XP SP3 OS.

  Hello

  ·         Have you been able to use the cam of life on the system before?

  ·         Where you installed the software and the drivers from?

  ·         Do you have an error message when you try to run the software?

  If you try to install the drivers on the CD/DVD and then, I would you suggest to uninstall the drivers and the software that is present on the system and then download the drivers and software on the Microsoft site and then install on the system and check if the problem is solved or not.

  For Windows XP 32 bit:

  http://www.Microsoft.com/hardware/download/DownloadResult.aspx?category=ice&type=LifeCam&name=RKA-00001&OS=XPSP2x64&lang=en

  I suggest you to return the items mentioned below.

  Troubleshoot failures to find the new LifeCam hardware

  http://support.Microsoft.com/kb/929087

  Troubleshoot failures to find the new LifeCam hardware

  http://support.Microsoft.com/kb/929087

  Set the empty preview, "initialization error" or 'no camera not connected' error in the LifeCam software

  http://support.Microsoft.com/kb/933311

• I downloaded creative cloud several times, why does the Bureau not appear after installation?

  I downloaded creative cloud several times, why does the Bureau not appear after installation?

  Sure Trudi.

  The agent would be able to connect to your machine and solve the problem.

  Contact the customer service

  * Be sure to stay connected with your Adobe ID before accessing the link above *.