D110A series: scanning to PC

Similar Questions

• hp2540: error with Hp2540 series scanning AirPrint

  I'm trying to scan documents and I get the following text:

  Scan reported that an error HP2540 series is currently unavailable. Please check if it is connected or turned on and try again later

  I went into the settings and I couldn't do anything with computer scan but Webscan seemed available but I don't know what it is. I tried it, it seemed to scan but there is no option to save. So I do not know if it is scanned or where to find the documents. I did turn off the printer and turn it back on. This sometimes happens, and there is no rhyme or reason to when and why as far as I can tell.

  Any ideas on how to get it to work again?

  Hi @clenny,

  Welcome to the HP Forums!

  I understand that you can not scan with your printer HP Deskjet 2540 on Mac OS X. I'm happy to discuss this issue scan for you!

  A few questions for beginners:

  1. You are able to make copies with your printer? Copy the text or mixed Documents.
  2. What version of Mac OS X are you using? If you do not know the operating system you are using, please visit this site. Whatsmyos.
  3. How is the printer connected? USB or wireless?

  In the meantime, please consult this guide to scanning, 'inaccessible Scanner' or ' year error occurred while scanning "message for HP Deskjet 1510, 2540 Deskjet, Deskjet Ink Advantage 1510 and series printer Deskjet Ink Advantage 2545.

  Hope this helps, and hope to hear from you soon!

• FPGA: R-series scan mode

  Available for PXI RT Systems FPGA scan Mode uses the R-series cards? Or you can use the Mode of the FPGA Interface to access the FPGA?

  Thank you

  Craig

  Scan mode interface cannot be used with the r series devices as far as I know, so you want to use the read/write and DMA FIFO nodes to communicate with the FPGA.

• All-in-One D110A Series: series D110a, fatal error installation problems

  Before our son using this printer at the school, he worked well at home for years.

  I am tired of the to put back, thinking it was already installed on my laptop, and all I needed to do is etup the wireless.

  Something went wrong when setting up wireless, someone walked the table and pulled off the printer power cord.

  Anyway, after that I could never set up the wireless, even after coming back to the default settings. I tried to uninstall all traces of the printer on the laptop and more. Now, I don't remember using a disk to set up a few years previously, only connect the cable USB and passing away.

  When you try this I get some of the elements of lines installed, but three lines who say Photosmart series would come to say no driver found. I tried to download the driver software manually, NG.

  Today, I just tried to use the hppiw.exe, the installation wizard, everything seems ok then I get a fatal error during Installation.

  Clicked by the guests, he even said at one point, a solution has been found, he did a report error report collection before that. Now, shows the following:

  Fatal error during Installation (no joke)

  Error 1935. an error occurred during the installation Assembly Microsoft.VC80.CRT, processor architecture = '86', publicKeyToken = "1fc8b3b9a1e18e3b", version = "8.0.50727.91", type = "win32". See Help and Support for more information. Then he said: go to the HP Support for troubleshooting on Fatal error and MSI. Scan.

  Fact some digging, checked I have a high end version of MS Installer (V.5.0.7601.18896).

  Any help will be appreciated.

  Thanks for your time.

  Well, a fatal error like this on Windows 7 is suggesting to an operating system problem. The following steps should be able to solve it.

  Click Start.

  In the search bar type cmd and press to enter.

  in the window that opens type "msiexec /Unregister" (without the quotes) and press ENTER.

  Type "msiexec/regserver" (without the quotes) and press ENTER.

  If you don't see anything except a new line will appear to type, you've successfully entered the correct line. Now:

  1. Click Start.
  2. In the search bar type in msconfig and press ENTER.
  3. Click the Services tab.
  4. Click Hide all by Microsoft.
  5. Click Disable all.
  6. Click the Startup tab.
  7. Click Disable all.
  8. Click OK and reboot your PC.
  9. Disable any antivirus, firewall and software security on your PC.

  At this point, you should be able to install the software. If you are, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• HP Envy 4500 e-all-in-one Seri: scanning multipe pages in a document file

  I'm trying to scan multiple pages in a document file. I am currently using Windows 10. What are the steps to do this successfully.

  Hello

  Thank you for using the forum.

  To use the Scan software on your printer, you will need to download and install the printer driver.

  We recommend that you download the full features and it can be found here:

  http://support.HP.com/us-en/drivers/selfservice/HP-envy-4500-e-all-in-one-printer-series/5304875/model/5304876#Z7_3054ICK0K8UDA0AQC11TA930C7

  Once you have installed the software, you can click the icon for the printer on the desktop and it will bring up the HP Printer Wizard and you can use the Scan software.

  You will first need to scan more than one page, select "Save as PDF".

  Once you've scanned the first page, in order to scan several pages, you will need to click on 'Add page' (as shown)

  

  When you are finished, you can save the document.

  Here are several videos giving you good advice on digitization (printers in the videos are using the same software to Scan as your HP Envy 4500)

  Scanning multiple photos:

  HP Officejet Pro 8630

  https://goo.GL/ADYDmo

  Scanning tips:

  HP Officejet Pro 8630

  https://goo.GL/fjZvqM

  HP Deskjet 2540 scanning tips

  https://goo.GL/qfQyf4

  Hope that helps.

  Please click on the "Bravo Thumbs up" If this has helped you and 'Accept as solution' If this helped solved your problem.

• HP photosmart premium e-all in one C310 series scanning issues

  Hello

  I have a hp photosmart e - all premium in one C310 series which I connected to my new computer windows 8.  The printer works but not the scanner and I can not get more information on how to operate? Can you please advise on how to get connected?  The installation of disc for drivers does not work.

  Thank you

  Hello

  Go here:
  http://h20000.www2.HP.com/bizsupport/TechSupport/ProductList.jsp?lang=es&CC=co&TaskID=135&prodTypeId=18972&prodSeriesId=4023238
  Select your printer and the fetch your drivers Windows 8.
  Those who will restore your missing feature to scan.
  Kind regards
  Carlos

• HP Office Jet 4630 series: scanning problems

  The printer is wireless connected to the computer as it will print and scan from commands from the computer. When I ask scan from the printer to the computer... message could not connect to the computer... check the connections.

  Thank you for all the suggestions. I finally quit (disconnected) my router, the printer and the computer for 30 seconds. Plugged the router in, when it was rising and ready, connected to the computer and the printer. Tested print command and control computer scan... worked fine... Big... requested test scan of the printer... It connected to the computer, scanned... EVERYTHING IS FINE!

• series scan until \r\n

  I try to save the serial data appearing in a text box indicator in a plain text file. I have accomplished this task, but now I need to make sure that a partial string will ever printed in the file. I need a way to analyse the data and print it in the text file without printing only part of the string. I tried scanning for endpoint \r\n characters, but still no luck. I'm relatively new to Labview so any help would be appreciated. I don't know that it's easier to make it be.

  
  

• HP Officejet 8500, A909a series, scanning, fax or copy

  Whenever I scan, copy or fax documents usning the auto feed on top of the printer, the documents resulting from this process themselves with a line down the center of the document.  What causes cela and how to eliminate the line?  If I use the glass screen, the documents do not have a line through them.

  I would like to clean the scanner bed and the Automatic Document Feeder (ADF) to remove any buildup that could cause this quality problem that you are experiencing. Pages 184 to 188 in the manual for your model of printer has instructions to clean all parts of the appliance that could cause the problem. I would start with the ADF since it is the part that is in use when you report the problem. Here is the link to your manual.
  http://goo.GL/bkOVx

  I hope this helps.

• HP photosmart more B210 series - scanning and turning off problems

  I run Mac OX Lion 10.7.5

  I think that I've updated my software to v.2.12 but when I click on the scanner, it says it is version 3.9.11

  When I go to download the software there is nothing for this model.

  Currently, the scanner will scan once then freezes. It turns off either and I have to unplug it. She telling me that it is not connected to the computer.

  can you suggest anything please?

  The option key is NOT a command.  It is next to him. It is marked 'option' or 'alt '.

  Preferences system is located in the Applications folder.  From your desktop, click on Go-> Applications-> system-> print and fax preferences

  You hold the option key key by clicking on the small "-" keys in the print and fax.  The "-" key located at the bottom left of the window to Fax and print next to the button «+»

• D110A series: I can't watch any other way thsn in ePrint documents

  All Word or PDF documents, I pull on my mobile Samsung 6, returns under HP ePrint visible only. I'm not even had an option on how to see otherwise. And when I pull to the high HP ePrint for watching my settings it is really any options, or whatever it is, that it seems that I turned there happen all the time. Can someone please?
  Thanks, Denise

  Hello

  For PDF, please install PDF Reader on your phone:

  http://www.WikiHow.com/view-PDF-files-on-an-Android-phone

  You can use Google docs app to view other documents.

  https://play.Google.com/store/apps/details?ID=com.Google.Android.apps.docs.editors.docs&hl=en

  This should be default on your phone.  Please follow the instructions below to change your ePrint to other app (s):

  http://fieldguide.Gizmodo.com/how-to-change-your-default-apps-in-Android-1589880218

  Kind regards.

• Epson StylusSX420W Series.Works only o.k.stand, can scan to the computer but nothing transfer from computer to printer

  Printer Epson Stylus SX420W Series scans and copies autonomous and can read and copy photos and documents on computer.

  Does not print anything from computer to the printer. Just silence. Run Fixit for printers. Said me okay even if it says my
  "printer is not the default printer.when I bring him up to the printer from the control panel and to hover above the default printer icon"
  Also, for the past few months every time I start my saying: error loading to computer
  C:\Users\AppData\Local\ayefukif.dll is displayed
  I just cancel it and exploit, it does not seem to interfere with what I'm doing, I didn't something on this subject. Could be the answer
  or nothing to do with my printing problems.
  Hope you find an answer. I can't, but then my knowledge is limited
  Thanks anyway
  Terry H.

  I could find my all-in-one Epson Stylus CX-4800, but not yours. But here's the Epson support Web site, you can go there and see if you can find your drivers and others you get.

  http://www.Epson.com/cgi-bin/store/support/SupportIndex.jsp

  Good luck

  RickS

• HP OfficeJet Pro 6960 All-in-o: scan multiple pages to a pdf file

  Hello

  I recently bought this printer/scanner and I'm very happy with it. I just have a problem with the scanning. I can't find a way to save several pages in a single file. I use the document feeder and go through all the pages, but they appear as separate files. I'd appreciate any help on how to solve this problem. Thank you very much.

  Hello
  
  Thank you for using the HP Forums.

  This resource will help you:

  HP Officejet Pro 6960 series: scan a document of 6 pages 2 sides using the ADF

  Hope that helps!

• HP5610xi: Using a HP 5610xi, how can I scan multiple pages into a single file?

  Using a HP 5610xi, how can I scan multiple pages into a single file?

  Hello
  
  Thank you for using the HP Forums.

  Can try this software:

  HP extended Scan
  
  FTP://FTP.HP.com/pub/scanners/HPScanExt/HPScanExt.msi

  Once it has downloaded and installed, go to start > all programs > HP > HP Scan extended > Run "HP Scan extended.

  This relevant resource will show you how to scan multiple pages into a single file:

  HP Officejet Pro 6960 series: scan a document of 6 pages 2 sides using the ADF

  Let us know if it works!

• Want 7640: File pdf scanned with my new 7640 envy

  I installed the full driver package, but without the extension pdf is displayed.  I need to use pdf, tif or jpg etc..  Is this possible?

  HI @Sheril1,

  Welcome to the HP Forum!

  Thanks for joining the community of the HP Forum.  It is a great resource for information, advice and solutions that have helped others. Here is a link to first time here? Learn how Post and more as a guide if you have any concerns or questions about the process.

  I understand that you do not see an option to scan in pdf format, even if you have installed the full features software. You see only jpg and tif.  Here are two links that I think can help. HP ENVY 5640, 5660, 7640 and Officejet 5740, 8040 Printer Series - scanning to a computer, Email or device memory and HP - scanning the HP Scan (Windows) computer printers.

  Please let me know if this helped.

  To help visitors and members to find solutions that have helped others, please consider choosing "accepted Solution" " " on the post that solves your trouble. " This will give it more visibility and make it easier to find.  "Please consider clicking on the" ""Thumbs Up Icon " below to say thank you for you help.