DAC failed over but Etl informatica workflow in workflow monitor

Similar Questions

• DAC as schedular tool for Informatica workflows (not for OBIApps repository)

  I have to use as administrative DAC / Informatica workflows Planner tool. Earlier, I set up the same thing for OBI Apps. It works well. Now I'm not referring to Oracle_BI_DW_Base.rep which is the built-in repository provided with OBI Apps. I have to run my workflow through DAC. I went through the below listed steps to get the same thing,
  (1) created the new USER
  (2) that the user are used to configure the DAC connection as well regarding the DAC repository tables. (not sure if it is a good idea or not)
  (3) create a new container of system Source. (no containers were there initially)
  (4) I Informatica as 'MyRep' folder, so I created task logical and physical files with the same name in DAC (Tools = > data seeds = >...)
  (5) created new area, tables, tasks, tasks synchronize.
  (5) configure informatica servers, physical Data Sources. Tested, no flaws.
  (6) added new execution Plan.
  (7) the area assigned to him.
  (8) click on the button "generate" in the settings section of the execution plan. No generated parameter. Now I got confused.
  (* 9) I couldn't find my tasks in TASK ORDERS tab.*
  (10) click on BUILD. Then got the error message as below,
  Task MESSAGE: No found to build this execution plan.
  
  Please let me know what the bad step here.
  
  Thank you

  ASSEMBLE you correctly the area in question? Confirmed that the area in question has the correct mission was before you add it to an execution plan?

• Informatica Workflow 'Successful' same correspsonding session failed.

  We have installed subsequently,
  
  OBIEE 10.3.1.4.
  DAC 10.3.1.4.
  BIApps 7.9.6,
  Informatica 8.6
  
  We try to run comprehensive HRMS charge from CAD. But in monitor workflow Informatica "SDE_ORA_PayrollFact_Full" FAILURE of the corresponding session but Workflow "SDE_ORA_PayrollFact_Full" State "Successful" poster Since Informatica Workflow succeeds, DAC marks as Succeeded.
  
  So the question is why Informatica shows the workflow as 'Successful' even corresponding session state is in the failed State?
  
  Thank you
  Slokam

  Frustrating isn't?

  Open the workflow designer and locate the workflow SDE_ORA_PayrollFact_Full. Go to tools, and then select Workflow Desinger. Drag the worfklow SDE_ORA_PayrollFact_Full in the work area. Double-click the session which is a failure and ensure that the following checkboxes are clicked: Fail (1) parent if this task fails, parent fail (2) if the task does not run.

  I hope this helps.

  -Austin

• Plan implementation is the next DAC but in Informatica error

  Hi all
  can someone help me with this problem
  I'm runining a plan of execution by DAC status is successful, but informatica, I get an error.
  The error message:
  TM_6193 error has occurred during the expansion of DB connection settings

  TM_6193 error has occurred during the expansion of DB connection settings

  Hello

  Could you describe the problem a little bit?
  If you run it with DAC, not the loaded data?
  Maps of how much do you have in your implementation Plan?

  In a first time - check the relational connections in Informatica Workflow Manager. They should be identical to your physical data source connections in DAC.

  It could be that useful...

• Informatica Workflow not able to connect to the source database.

  Hello
  
  I completed the installation of OBI Apps.All test connections are working properly and I have also configured the relational connection in Informatica Workflow.The passwords, user name and connect string are correct. Tasks that need to connect to the source database fail always when I run an ETL. I checked the logs of these workflow session and he gave me following error:
  
  READER_1_1_1 > DBG_21438 Reader: Source is [UPG11i], [obiee] users
  READER_1_1_1 > CMN_1761 Timestamp event: [Fri Sep 05 18:01:37 2008]
  READER_1_1_1 > RR_4036 error connection to the database]
  Database driver error...
  Function name: logon
  ORA-12154: TNS: could not resolve the connect identifier specified
  
  Database driver error...
  Function name: connect
  [Database error: unable to connect to the database using the user [obiee] and the connection string [UPG11i].]
  
  DAC, I am able to connect to the databases. There seems to be a problem in relational connections. What are the drivers involved and where they should be installed.
  
  Help, please.
  
  Thank you and best regards,
  Soumya.

  It seems that the TNS Informatica file is pointing to is not the appropriate for your database entry. The the more safe thing to do is to verify that all the settings Oracle containing information in the source database.

• Level task DAC settings not go to Informatica

  Hello

  I have strange question

  I'm under full load and and most of the mappings is defective.

  When I checked the log of session I got the error: ORA-00936: lack of expression

  the problem is that it is has failed level settings of the workflow task

  It passes connection parameters and everything... and 25% of workflows are finished but the workflow that has task level settings failed.

  all become ORA-00936: missing expression error

  Thank you

  Abhishek

  have you added this informatica overrideMpltVarWithMapVar = Yes variable?

• Update of the victory maintains and fail - over and over (error code: 80070005)

  original title: update victory maintains and fail - over and over

  Windows Vista telllng keeps me 'updates can be' an important update: Cumulative security update for Internet Explorer 8 for Windows Vista (KB2530548)
  has now been updated SEVERAL times - about 10.  It still fails. Then I'm prompted to restart to complete the update or "patch and stop", but this does never, either.  A download option is to install IE9.  I did, too, it seemed to have worked, but after I followed the direction "Reboot to use IE9" I have IE8, which still requires the update 'Important' mentioned above.
  How can I stop this endless loop?  I tried to download a new copy of IE8, but got an error because a more advanced version has been installed. Were so is IE9 which has been installed?  How can I find it?

  It seems that my problems with IE8 are more.
  As a result of the additional advice of Microsoft, I am delaying installation of IE9.
  Thanks to those who helped me.

• Fail-Over with limited resources

  I'm new to VMware.  I support a VRTX of Dell server at (3 blades) recently ordered.  Please answer the following questions:

  1 how Fail-Over does not work if you have limited resources?  When I install server Dell VRTX, I very careful with the allocation of RAM for some of the virtual machine.  It is mainly a VM that I am concerned about (64 GB of RAM).  I have a lot of storage for both the present and future of the virtual computer, so I'm talking about size/allocation of storage during the debate.  My current setup is:

  Slide 1:

  VM 1 # 8 processor cores, 64 GB RAM

  VM 2 # 4 CPU cores, 16 GB of RAM

  Blade 2:

  VM 3 # 4 cores of the processor, 32 GB RAM

  VM #4 4 CPU cores, 16 GB of RAM

  Blade 3:

  VM 5 # 8 processor cores, 32 GB of RAM

  Each blade: 2 (20 logic Cores/CPU) CPU, 128 GB of RAM

  Later this year I intend to add at least two 2 more VM (RAM allocation may be somewhat higher than those listed.).

  VM #6 4 CPU cores, 16 GB of RAM

  VM #7 4 CPU cores, 16 GB of RAM

  All the VMS operating system: Windows Server 2012 R2 64 bit

  2. I'm afraid that if 1 blade fails, and later, I much more Total virtual computer, what happens if the allocation of virtual machine disk RAM failing is greater than what is available on the blades for which virtual machine failover?

  I intend to recommend increasing the amount of RAM to 192 GB (minimum) by blade, just to be sure.  However, there is a chance that the increase of RAM cannot be approved.

  Thanks in advance.

  Hello

  If the amount of vRAM exceeds the available landau your VMs will have a bad time. Transparent page sharing, compression will help but eventually your virtual machines will begin to Exchange and it will be very sensitive.

  http://www.VMware.se/PDF/Perf_Best_Practices_vSphere5.5.PDF

  Kind regards

  Martin

• Windows Live Mail does not open. Contacted the help people who told me to uninstall Windows Live and start over, but my computer won't uninstall it?

  Windows Live Mail does not open. Contacted the help people who told me to uninstall Windows Live and start over, but my computer won't uninstall it? Back to the use of Windows Mail, but now some of my emails are not received by some of their recipients even if they seem to send and there is no error message. It is not a server problem, as everything goes through, if I send directly from their site. Help please.

  original title: Windows Live Mail does not open.

  Hi Fenellacat,

  Here are specific instructions on how to remove and reinstall Windows Live Mail.

  http://support.Microsoft.com/default.aspx/KB/938275

  Matt Hudson
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I want to format my hard drive to start over but I do not have the windows installation disc. How can I reinstall the pack without the disks after I cleaned the system?

  Resettlement without disks

  Hello. I have a computer bought from a friend with windows vista home premium installed. I want to format my hard drive to start over but I do not have the windows installation disc. How can I reinstall the pack without the disks after I cleaned the system? Thank you, Kim

  Hello. I have a computer bought from a friend with windows vista home premium installed. I want to format my hard drive to start over but I do not have the windows installation disc. How can I reinstall the pack without the disks after I cleaned the system? Thank you, Kim

  You have a hard drive partition to do - but you would need to contact/see the FAQ from the hardware manufacturer (HP, Dell, Gateway, Lenovo, etc) to see if and how.

  Otherwise - you might have to order (pay for possibly) the factory restore/recovery of the value of the manufacturer.

  http://www.ZDNet.com/blog/Bott/lost-your-Windows-discs-how-to-get-replacement-media-legally/4320?tag=nl.E539

  If it was built * friend *, you will communicate with them.  Ask your media.

• I have a subscription, it's almost over, but I need to change plans and cannot select one I need in the menu plan for change, and I can't cancel. Is it possible to cancel it?

  I have a subscription, it's almost over, but I need to change plans and cannot select one I need in the menu plan for change, and I can't cancel. Is it possible to cancel it?

  Hello

  Please contact support by calling/chat for cancellation requests and billing queries:

  Contact the customer service

  * Be sure to stay connected with your Adobe ID before accessing the link above *.

  You can also check the help below document:

  https://helpx.Adobe.com/x-productkb/policy-pricing/cancel-membership-subscription.html

  Please go through the Adobe - General conditions of subscription as well.

• He said that my free trial is over, but I'm supposed to have a free membership to creative cloud

  He said that my free trial is over, but I'm supposed to have a free membership to creative cloud

  Hello

  Please see software Adobe to trial has expired at the beginning

  Hope that helps!

  Kind regards

  Sheena

• DAC: task failed during the ETL for financial applications

  I'm looking for my first ETL on OLIVIER 7.9.6.4

  I use Oracle EBS 12.1.1 as source system.

  the ETL full 314 tasks successfully, but it fails at the task named:

  'SDE_ORA_GL_AR_REV_LinkageInformation_Extract '.

  DAC error log:

  =====================================

  STD OUTPUT

  =====================================

  Informatica (r) PMCMD, version [9.1.0 HotFix2], build [357.0903], 32-bit Windows

  Copyright (c) Informatica Corporation 1994-2011

  All rights reserved.

  Called Wed Sep 18 09:46:41 2013

  Connected to the Service of integration: [infor_int].

  File: [SDE_ORAR1211_Adaptor]

  Workflow: [SDE_ORA_GL_AR_REV_LinkageInformation_Extract_Full]

  Instance: [SDE_ORA_GL_AR_REV_LinkageInformation_Extract_Full]

  Mapping: [SDE_ORA_GL_AR_REV_LinkageInformation_Extract]

  Session log file: [C:\Informatica\server\infa_shared\SessLogs\. SDE_ORA_GL_AR_REV_LinkageInformation_Extract_Full.ORA_R1211.log]

  Success of the source lines: [0]

  Source has no lines: [0]

  Target lines of success: [0]

  Target lines failed: [0]

  Number of errors in transformation: [0]

  First error code [4035]

  First error message: [[error SQL RR_4035

  ORA-00904: "XLA_EVENTS." "" UPG_BATCH_ID ": invalid identifier

  Database driver error...

  Function name: run

  Stmt SQL: SELECT DISTINCT

  DLINK. SOURCE_DISTRIBUTION_ID_NUM_1 DISTRIBUTION_ID,

  DLINK. SOURCE_DISTRIBUTION_TYPE TABLE_SOURCE,

  AELINE. ACCOUNTING_CLASS_CODE,

  GLIMPREF. JE_HEADER_ID JE_HEADER_ID,

  GLIMPREF. JE_LINE_NUM JE_LINE_NUM,

  AELINE. AE_HEADER_ID AE_HEADER_ID,

  AELINE. AE_LINE_NUM AE_LINE_NUM,

  T.LEDGER_ID LEDGER_ID,

  T.LEDGER_CATEGORY_CODE LEDGER_TYPE,

  JBATCH.NAME BATCH_NAME,

  JHEADER.NAME HOSTHEADERNAME,

  BY. END_DATE,

  AELINE. CODE_COMBINATI]

  Task run status: [failure]

  Integration service: [infor_int]

  The integration of Service process: [infor_int]

  Grid integration Service: [infor_int]

  ----------------------------

  Name of node [node01_AMAZON-9C628AAE]

  Fragment of preparation

  Partition: #1 [Partition]

  Instance of transformation: [SQ_XLA_AE_LINES]

  Transformation: [SQ_XLA_AE_LINES]

  Apply the lines: [0]

  Number of rows affected: [0]

  Rejected lines: [0]

  Throughput(Rows/sec): [0]

  Throughput(bytes/sec): [0]

  Last [16004] error code, message [ERROR: prepare failed.: []]

  ORA-00904: "XLA_EVENTS." "" UPG_BATCH_ID ": invalid identifier

  Database driver error...

  Function name: run

  Stmt SQL: SELECT DISTINCT

  DLINK. SOURCE_DISTRIBUTION_ID_NUM_1 DISTRIBUTION_ID,

  DLINK. SOURCE_DISTRIBUTION_TYPE TABLE_SOURCE,

  AELINE. ACCOUNTING_CLASS_CODE,

  GLIMPREF. JE_HEADER_ID JE_HEADER_ID,

  GLIMPREF. JE_LINE_NUM JE_LINE_NUM,

  AELINE. AE_HEADER_ID AE_HEADER_ID,

  AELINE. AE_LINE_NUM AE_LINE_NUM,

  T.LEDGER_ID LEDGER_ID,

  T.LEDGER_CATEGORY_CODE LEDGER_TYPE,

  JBATCH.NAME BATCH_NAME,

  JHEADER.NAME HOSTHEADERNAME,

  BY. END_DATE,

  AELINE. CODE_CO]

  Departure time: [Sat Oct 18 09:46:13 2013]

  End time: [Sat Oct 18 09:46:13 2013]

  Partition: #1 [Partition]

  Instance of transformation: [W_GL_LINKAGE_INFORMATION_GS]

  Transformation: [W_GL_LINKAGE_INFORMATION_GS]

  Apply the lines: [0]

  Number of rows affected: [0]

  Rejected lines: [0]

  Throughput(Rows/sec): [0]

  Throughput(bytes/sec): [0]

  Last error code [0], message [no errors].

  Departure time: [Sat Oct 18 09:46:14 2013]

  End time: [Sat Oct 18 09:46:14 2013]

  Disconnection of Service integration

  Completed at Wed Sep 18 09:46:41 2013

  -----------------------------------------------------------------------------------------------------

  Informatica session log files:

  DIRECTOR > VAR_27028 use override the value [DataWarehouse] session parameter: [$DBConnection_OLAP].

  DIRECTOR > VAR_27028 use override the value [ORA_R1211] for the session parameter: [$DBConnection_OLTP].

  DIRECTOR > VAR_27028 use override the value [.] SDE_ORA_GL_AR_REV_LinkageInformation_Extract_Full.ORA_R1211.log] for the session parameter: [$PMSessionLogFile].

  DIRECTOR > VAR_27028 use override the [26] value for parameter mapping: [$DATASOURCE_NUM_ID].

  DIRECTOR > VAR_27028 use override the value [' n '] parameter mapping: [$FILTER_BY_LEDGER_ID].

  DIRECTOR > VAR_27028 use override the value [' n '] parameter mapping: [$FILTER_BY_LEDGER_TYPE].

  DIRECTOR > VAR_27028 use override value for the parameter mapping]: [$$ Hint1].

  DIRECTOR > override VAR_27028 use value [01/01/1970] parameter mapping: [$INITIAL_EXTRACT_DATE].

  DIRECTOR > override VAR_27028 use value [01/01/1990] parameter mapping: [$LAST_EXTRACT_DATE].

  DIRECTOR > VAR_27028 use override value [1] to parameter mapping: [$LEDGER_ID_LIST].

  DIRECTOR > VAR_27028 use override the value ["NONE"] parameter mapping: [$LEDGER_TYPE_LIST].

  DIRECTOR > session initialization of TM_6014 [SDE_ORA_GL_AR_REV_LinkageInformation_Extract_Full] at [Sat Oct 18 09:46:13 2013].

  DIRECTOR > name of the repository TM_6683: [infor_rep]

  DIRECTOR > TM_6684 server name: [infor_int]

  DIRECTOR > TM_6686 folder: [SDE_ORAR1211_Adaptor]

  DIRECTOR > Workflow TM_6685: [SDE_ORA_GL_AR_REV_LinkageInformation_Extract_Full] running Instance name: Id series []: [2130]

  DIRECTOR > mapping TM_6101 name: SDE_ORA_GL_AR_REV_LinkageInformation_Extract [version 1].

  DIRECTOR > TM_6963 pre 85 Timestamp compatibility is enabled

  DIRECTOR > the TM_6964 Date of the Session format is [HH24:MI:SS DD/MM/YYYY]

  DIRECTOR > TM_6827 [C:\Informatica\server\infa_shared\Storage] will be used as the storage of session directory [SDE_ORA_GL_AR_REV_LinkageInformation_Extract_Full].

  DIRECTOR > cache CMN_1805 recovery is removed when running in normal mode.

  DIRECTOR > CMN_1802 Session recovery cache initialization is complete.

  DIRECTOR > configuration using [DisableDB2BulkMode, Yes] TM_6708 property

  DIRECTOR > configuration using [OraDateToTimestamp, Yes] TM_6708 property

  DIRECTOR > configuration using [overrideMpltVarWithMapVar Yes] TM_6708 property

  DIRECTOR > TM_6708 using the configuration property [SiebelUnicodeDB, [APPS] @[54.225.65.108:1521:VIS] [DWH_REP2]@[AMAZON-9C628AAE:1521:obiaDW1]]

  DIRECTOR > TM_6703 Session [SDE_ORA_GL_AR_REV_LinkageInformation_Extract_Full] is headed by [node01_AMAZON-9C628AAE], version [9.1.0 HotFix2] 32-bit integration Service, build [0903].

  MANAGER > PETL_24058 Running score of the Group [1].

  MANAGER > initialization of engine PETL_24000 of parallel Pipeline.

  MANAGER > PETL_24001 parallel Pipeline engine running.

  MANAGER > session initialization PETL_24003 running.

  MAPPING > CMN_1569 Server Mode: [ASCII]

  MAPPING > code page of the server CMN_1570: [MS Windows Latin 1 (ANSI), superset of Latin1]

  MAPPING > TM_6151 the session to the sort order is [binary].

  MAPPING > treatment of low accuracy using TM_6156.

  MAPPING > retry TM_6180 blocking logic will not apply.

  MAPPING > TM_6187 Session focused on the target validation interval is [10000].

  MAPPING > TM_6307 DTM error log disabled.

  MAPPING > TE_7022 TShmWriter: initialized

  MAPPING > Transformation TE_7004 Parse WARNING [IIF (EVENT_TYPE_CODE = 'RECP_REVERSE',

  IIF (UPG_BATCH_ID > 0,

  SOURCE_TABLE | '~' || DISTRIBUTION_ID,

  SOURCE_TABLE | ' ~ RECEIPTREVERSE ~' | DISTRIBUTION_ID),

  SOURCE_TABLE | '~' || DISTRIBUTION_ID)

  ]; transformation continues...

  MAPPING > TE_7004 processing Parse WARNING [< < PM Parse WARNING > > [|]: operand is converted to a string.

  ... IIF (EVENT_TYPE_CODE = 'RECP_REVERSE',

  IIF (UPG_BATCH_ID > 0,

  SOURCE_TABLE | '~' || > > > > DISTRIBUTION_ID < < < <.

  SOURCE_TABLE | ' ~ RECEIPTREVERSE ~' | DISTRIBUTION_ID),

  SOURCE_TABLE | '~' || DISTRIBUTION_ID)

  < < WARNING PM Parse > > [|]: operand is converted to a string

  ... IIF (EVENT_TYPE_CODE = 'RECP_REVERSE',

  IIF (UPG_BATCH_ID > 0,

  SOURCE_TABLE | '~' || DISTRIBUTION_ID,

  SOURCE_TABLE | ' ~ RECEIPTREVERSE ~' | (> > > > DISTRIBUTION_ID < < < <).

  SOURCE_TABLE | '~' || DISTRIBUTION_ID)

  < < WARNING PM Parse > > [|]: operand is converted to a string

  ... IIF (EVENT_TYPE_CODE = 'RECP_REVERSE',

  IIF (UPG_BATCH_ID > 0,

  SOURCE_TABLE | '~' || DISTRIBUTION_ID,

  SOURCE_TABLE | ' ~ RECEIPTREVERSE ~' | DISTRIBUTION_ID),

  SOURCE_TABLE | '~' || (> > > > DISTRIBUTION_ID < < < <)

  ]; transformation continues...

  MAPPING > Transformation TE_7004 Parse WARNING [JE_HEADER_ID |] '~' || JE_LINE_NUM]; transformation continues...

  MAPPING > TE_7004 processing Parse WARNING [< < PM Parse WARNING > > [|]: operand is converted to a string.

  ... > > > > JE_HEADER_ID < < < < | '~' || JE_LINE_NUM < < PM Parse WARNING > > [JE_LINE_NUM]: operand is converted to a string

  ... JE_HEADER_ID | '~' || [> > > > JE_LINE_NUM < < < <]; transformation continues...

  MAPPING > Transformation TE_7004 Parse WARNING [AE_HEADER_ID |] '~' || AE_LINE_NUM]; transformation continues...

  MAPPING > TE_7004 processing Parse WARNING [< < PM Parse WARNING > > [|]: operand is converted to a string.

  ... > > > > AE_HEADER_ID < < < < | '~' || AE_LINE_NUM < < PM Parse WARNING > > [AE_LINE_NUM]: operand is converted to a string

  ... AE_HEADER_ID | '~' || [> > > > AE_LINE_NUM < < < <]; transformation continues...

  MAPPING > TM_6007 DTM initialized successfully for the session [SDE_ORA_GL_AR_REV_LinkageInformation_Extract_Full]

  DIRECTOR > PETL_24033 all the DTM connection information: [< NO >].

  MANAGER > PETL_24004 from the tasks before the session. : (My Sep 18 09:46:13 2013)

  MANAGER > task PETL_24027 before the session completed successfully. : (My Sep 18 09:46:13 2013)

  DIRECTOR > PETL_24006 from data movement.

  MAPPING > Total TM_6660 Buffer Pool size is 12582912 bytes and block size is 128000 bytes.

  READER_1_1_1 > DBG_21438 Reader: Source is [54.225.65.108:1521/VIS], [APPS] users

  READER_1_1_1 > BLKR_16003 initialization completed successfully.

  WRITER_1_ * _1 > WRT_8146 author: target is the database [AMAZON - 9C628AAE:1521 / obiaDW1], [DWH_REP2], loose [on] mode users

  WRITER_1_ * _1 > WRT_8106 WARNING! Session Mode Bulk - recovery is not guaranteed.

  WRITER_1_ * _1 > target WRT_8124 W_GL_LINKAGE_INFORMATION_GS of Table: SQL INSERT statement:

  INSERT INTO W_GL_LINKAGE_INFORMATION_GS(SOURCE_DISTRIBUTION_ID,JOURNAL_LINE_INTEGRATION_ID,LEDGER_ID,LEDGER_TYPE,DISTRIBUTION_SOURCE,JE_BATCH_NAME,JE_HEADER_NAME,JE_LINE_NUM,POSTED_ON_DT,GL_ACCOUNT_ID,SLA_TRX_INTEGRATION_ID,DATASOURCE_NUM_ID) VALUES ( ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?)

  WRITER_1_ * _1 > connection WRT_8270 #1 target group consists of target (s) [W_GL_LINKAGE_INFORMATION_GS]

  WRITER_1_ * _1 > WRT_8003 writer initialization complete.

  READER_1_1_1 > BLKR_16007 player run began.

  READER_1_1_1 > RR_4029 SQ [SQ_XLA_AE_LINES] User Instance specified SQL query [SELECT DISTINCT

  DLINK. SOURCE_DISTRIBUTION_ID_NUM_1 DISTRIBUTION_ID,

  DLINK. SOURCE_DISTRIBUTION_TYPE TABLE_SOURCE,

  AELINE. ACCOUNTING_CLASS_CODE,

  GLIMPREF. JE_HEADER_ID JE_HEADER_ID,

  GLIMPREF. JE_LINE_NUM JE_LINE_NUM,

  AELINE. AE_HEADER_ID AE_HEADER_ID,

  AELINE. AE_LINE_NUM AE_LINE_NUM,

  T.LEDGER_ID LEDGER_ID,

  T.LEDGER_CATEGORY_CODE LEDGER_TYPE,

  JBATCH.NAME BATCH_NAME,

  JHEADER.NAME HOSTHEADERNAME,

  BY. END_DATE,

  AELINE. CODE_COMBINATION_ID,

  AEHEADER. EVENT_TYPE_CODE,

  NVL (XLA_EVENTS. UPG_BATCH_ID, 0) UPG_BATCH_ID

  DLINK XLA_DISTRIBUTION_LINKS

  GL_IMPORT_REFERENCES GLIMPREF

  XLA_AE_LINES AELINE

  GL_JE_HEADERS JHEADER

  GL_JE_BATCHES JBATCH

  , GL_LEDGERS T

  , GL_PERIODS BY

  WHERE DLINK. SOURCE_DISTRIBUTION_TYPE IN

  ("AR_DISTRIBUTIONS_ALL"

  "RA_CUST_TRX_LINE_GL_DIST_ALL")

  AND DLINK. APPLICATION_ID = 222

  AND AELINE. APPLICATION_ID = 222

  AND AELINE.GL_SL_LINK_TABLE = GLIMPREF.GL_SL_LINK_TABLE

  AND AELINE.GL_SL_LINK_ID = GLIMPREF.GL_SL_LINK_ID

  AND AELINE. AE_HEADER_ID = DLINK. AE_HEADER_ID

  AND AELINE. AE_LINE_NUM = DLINK. AE_LINE_NUM

  AND GLIMPREF. JE_HEADER_ID = JHEADER. JE_HEADER_ID

  AND JHEADER. JE_BATCH_ID = JBATCH. JE_BATCH_ID

  AND JHEADER. LEDGER_ID = T.LEDGER_ID

  AND JHEADER. STATUS                         = 'P'

  AND T.PERIOD_SET_NAME = BY. PERIOD_SET_NAME

  AND JHEADER. PERIOD_NAME = PER. PERIOD_NAME

  AND JHEADER. CREATION_DATE > =.

  TO_DATE (JANUARY 1, 1970 00:00:00 ')

  "MM/DD/YYYY HH24:MI:SS")

  AND DECODE (', 'Y', T.LEDGER_ID, 1) (1)

  [AND DECODE (', 'Y', T.LEDGER_CATEGORY_CODE, 'NONE') ("NO")]

  READER_1_1_1 > RR_4049 SQL query sent to the database: (Wed Sep 18 09:46:13 2013)

  WRITER_1_ * _1 > WRT_8005 writer run began.

  WRITER_1_ * _1 > WRT_8158

  START SUPPORT SESSION *.

  Startup load time: Fri Sep 18 09:46:13 2013

  Target table:

  W_GL_LINKAGE_INFORMATION_GS

  READER_1_1_1 > CMN_1761 Timestamp event: [Thu Sep 18 09:46:13 2013]

  READER_1_1_1 > RR_4035 SQL Error]

  ORA-00904: "XLA_EVENTS." "" UPG_BATCH_ID ": invalid identifier

  Database driver error...

  Function name: run

  Stmt SQL: SELECT DISTINCT

  DLINK. SOURCE_DISTRIBUTION_ID_NUM_1 DISTRIBUTION_ID,

  DLINK. SOURCE_DISTRIBUTION_TYPE TABLE_SOURCE,

  AELINE. ACCOUNTING_CLASS_CODE,

  GLIMPREF. JE_HEADER_ID JE_HEADER_ID,

  GLIMPREF. JE_LINE_NUM JE_LINE_NUM,

  AELINE. AE_HEADER_ID AE_HEADER_ID,

  AELINE. AE_LINE_NUM AE_LINE_NUM,

  T.LEDGER_ID LEDGER_ID,

  T.LEDGER_CATEGORY_CODE LEDGER_TYPE,

  JBATCH.NAME BATCH_NAME,

  JHEADER.NAME HOSTHEADERNAME,

  BY. END_DATE,

  AELINE. CODE_COMBINATION_ID,

  AEHEADER. EVENT_TYPE_CODE,

  NVL (XLA_EVENTS. UPG_BATCH_ID, 0) UPG_BATCH_ID

  DLINK XLA_DISTRIBUTION_LINKS

  GL_IMPORT_REFERENCES GLIMPREF

  XLA_AE_LINES AELINE

  GL_JE_HEADERS JHEADER

  GL_JE_BATCHES JBATCH

  , GL_LEDGERS T

  , GL_PERIODS BY

  WHERE DLINK. SOURCE_DISTRIBUTION_TYPE IN

  ("AR_DISTRIBUTIONS_ALL"

  "RA_CUST_TRX_LINE_GL_DIST_ALL")

  AND DLINK. APPLICATION_ID = 222

  AND AELINE. APPLICATION_ID = 222

  AND AELINE.GL_SL_LINK_TABLE = GLIMPREF.GL_SL_LINK_TABLE

  AND AELINE.GL_SL_LINK_ID = GLIMPREF.GL_SL_LINK_ID

  AND AELINE. AE_HEADER_ID = DLINK. AE_HEADER_ID

  AND AELINE. AE_LINE_NUM = DLINK. AE_LINE_NUM

  AND GLIMPREF. JE_HEADER_ID = JHEADER. JE_HEADER_ID

  AND JHEADER. JE_BATCH_ID = JBATCH. JE_BATCH_ID

  AND JHEADER. LEDGER_ID = T.LEDGER_ID

  AND JHEADER. STATUS                         = 'P'

  AND T.PERIOD_SET_NAME = BY. PERIOD_SET_NAME

  AND JHEADER. PERIOD_NAME = PER. PERIOD_NAME

  AND JHEADER. CREATION_DATE > =.

  TO_DATE (JANUARY 1, 1970 00:00:00 ')

  "MM/DD/YYYY HH24:MI:SS")

  AND DECODE (', 'Y', T.LEDGER_ID, 1) (1)

  AND DECODE (', 'Y', T.LEDGER_CATEGORY_CODE, 'NONE') ('NONE')

  Fatal error Oracle

  Database driver error...

  Function name: run

  Stmt SQL: SELECT DISTINCT

  DLINK. SOURCE_DISTRIBUTION_ID_NUM_1 DISTRIBUTION_ID,

  DLINK. SOURCE_DISTRIBUTION_TYPE TABLE_SOURCE,

  AELINE. ACCOUNTING_CLASS_CODE,

  GLIMPREF. JE_HEADER_ID JE_HEADER_ID,

  GLIMPREF. JE_LINE_NUM JE_LINE_NUM,

  AELINE. AE_HEADER_ID AE_HEADER_ID,

  AELINE. AE_LINE_NUM AE_LINE_NUM,

  T.LEDGER_ID LEDGER_ID,

  T.LEDGER_CATEGORY_CODE LEDGER_TYPE,

  JBATCH.NAME BATCH_NAME,

  JHEADER.NAME HOSTHEADERNAME,

  BY. END_DATE,

  AELINE. CODE_COMBINATION_ID,

  AEHEADER. EVENT_TYPE_CODE,

  NVL (XLA_EVENTS. UPG_BATCH_ID, 0) UPG_BATCH_ID

  DLINK XLA_DISTRIBUTION_LINKS

  GL_IMPORT_REFERENCES GLIMPREF

  XLA_AE_LINES AELINE

  GL_JE_HEADERS JHEADER

  GL_JE_BATCHES JBATCH

  , GL_LEDGERS T

  , GL_PERIODS BY

  WHERE DLINK. SOURCE_DISTRIBUTION_TYPE IN

  ("AR_DISTRIBUTIONS_ALL"

  "RA_CUST_TRX_LINE_GL_DIST_ALL")

  AND DLINK. APPLICATION_ID = 222

  AND AELINE. APPLICATION_ID = 222

  AND AELINE.GL_SL_LINK_TABLE = GLIMPREF.GL_SL_LINK_TABLE

  AND AELINE.GL_SL_LINK_ID = GLIMPREF.GL_SL_LINK_ID

  AND AELINE. AE_HEADER_ID = DLINK. AE_HEADER_ID

  AND AELINE. AE_LINE_NUM = DLINK. AE_LINE_NUM

  AND GLIMPREF. JE_HEADER_ID = JHEADER. JE_HEADER_ID

  AND JHEADER. JE_BATCH_ID = JBATCH. JE_BATCH_ID

  AND JHEADER. LEDGER_ID = T.LEDGER_ID

  AND JHEADER. STATUS                         = 'P'

  AND T.PERIOD_SET_NAME = BY. PERIOD_SET_NAME

  AND JHEADER. PERIOD_NAME = PER. PERIOD_NAME

  AND JHEADER. CREATION_DATE > =.

  TO_DATE (JANUARY 1, 1970 00:00:00 ')

  "MM/DD/YYYY HH24:MI:SS")

  AND DECODE (', 'Y', T.LEDGER_ID, 1) (1)

  AND DECODE (', 'Y', T.LEDGER_CATEGORY_CODE, 'NONE') ('NONE')

  [Error fatal Oracle].

  READER_1_1_1 > CMN_1761 Timestamp event: [Thu Sep 18 09:46:13 2013]

  READER_1_1_1 > BLKR_16004 ERROR: prepare failed.

  WRITER_1_ * _1 > WRT_8333 roll back all the targets due to the fatal error of session.

  WRITER_1_ * _1 > rollback WRT_8325 Final, executed for the target [W_GL_LINKAGE_INFORMATION_GS] at end of load

  WRITER_1_ * _1 > time full load WRT_8035: Sun Sep 18 09:46:13 2013

  SUMMARY OF THE LOAD

  ============

  WRT_8036 target: W_GL_LINKAGE_INFORMATION_GS (Instance name: [W_GL_LINKAGE_INFORMATION_GS])

  WRT_8044 responsible for this target data no.

  WRITER_1_ * _1 > WRT_8043 * END LOAD SESSION *.

  MANAGER > PETL_24031

  PERFORMANCE INFORMATION FOR TGT SUPPORT ORDER [1] GROUP, SIMULTANEOUS GAME [1] *.

  Thread [READER_1_1_1] created [stage play] point score [SQ_XLA_AE_LINES] is complete. Running time total was enough for significant statistics.

  [TRANSF_1_1_1] thread created for [the scene of transformation] partition has made to the point [SQ_XLA_AE_LINES]. Running time total was enough for significant statistics.

  Thread [WRITER_1_ * _1] created for [the scene of writing] partition has made to the point [W_GL_LINKAGE_INFORMATION_GS]. Running time total was enough for significant statistics.

  MANAGER > PETL_24005 from tasks after the session. : (My Sep 18 09:46:14 2013)

  MANAGER > task of PETL_24029 after the session completed successfully. : (My Sep 18 09:46:14 2013)

  MAPPING > TM_6018 the session completed with errors of processing row [0].

  MANAGER > parallel PETL_24002 engine Pipeline completed.

  DIRECTOR > Session PETL_24013 run duly filled with failure.

  DIRECTOR > TM_6022

  PLENARY OF THE LOAD

  ================================================

  DIRECTOR > TM_6252 Source load summary.

  DIRECTOR > Table CMN_1740: [SQ_XLA_AE_LINES] (name of the Instance: [SQ_XLA_AE_LINES])

  Output [0] lines, affected lines [0], applied [0] lines, rejected lines [0]

  DIRECTOR > TM_6253 Target Load summary.

  DIRECTOR > Table CMN_1740: [W_GL_LINKAGE_INFORMATION_GS] (name of the Instance: [W_GL_LINKAGE_INFORMATION_GS])

  Output [0] lines, affected lines [0], applied [0] lines, rejected lines [0]

  DIRECTOR > TM_6023

  ===================================================

  DIRECTOR > TM_6020 Session [SDE_ORA_GL_AR_REV_LinkageInformation_Extract_Full] to [Sat Oct 18 09:46:14 2013].

  ------------------------------------------------------------------------------------------------------------------------------------------------------------------

  * I made a few requests in my source (Vision) database, table "XLA_EVENTS" exists, column "UPG_BATCH_ID" exists also

  * I added 'XLA_EVENTS' to the FROM clause and he ran in SQL Developer

  
  * in the SELECT clause, I see a column named 'AEHEADER. EVENT_TYPE_CODE ".

  but there is no table named 'AEHEADER' in the FROM clause

  so I added it manually, it is without doubt makes reference to 'XLA_AE_HEADERS '.

  The final request looks like this:

  SELECT DISTINCT

  DLINK. SOURCE_DISTRIBUTION_ID_NUM_1 DISTRIBUTION_ID,

  DLINK. SOURCE_DISTRIBUTION_TYPE TABLE_SOURCE,

  AELINE. ACCOUNTING_CLASS_CODE,

  GLIMPREF. JE_HEADER_ID JE_HEADER_ID,

  GLIMPREF. JE_LINE_NUM JE_LINE_NUM,

  AELINE. AE_HEADER_ID AE_HEADER_ID,

  AELINE. AE_LINE_NUM AE_LINE_NUM,

  T.LEDGER_ID LEDGER_ID,

  T.LEDGER_CATEGORY_CODE LEDGER_TYPE,

  JBATCH.NAME BATCH_NAME,

  JHEADER.NAME HOSTHEADERNAME,

  BY. END_DATE,

  AELINE. CODE_COMBINATION_ID,

  AEHEADER. EVENT_TYPE_CODE,

  NVL (XLA_EVENTS. UPG_BATCH_ID, 0) UPG_BATCH_ID

  DLINK XLA_DISTRIBUTION_LINKS

  GL_IMPORT_REFERENCES GLIMPREF

  XLA_AE_LINES AELINE

  GL_JE_HEADERS JHEADER

  GL_JE_BATCHES JBATCH

  , GL_LEDGERS T

  , GL_PERIODS BY

  XLA_AE_HEADERS AEHEADER

  XLA_EVENTS

  WHERE DLINK. SOURCE_DISTRIBUTION_TYPE IN

  ("AR_DISTRIBUTIONS_ALL"

  "RA_CUST_TRX_LINE_GL_DIST_ALL")

  AND DLINK. APPLICATION_ID = 222

  AND AELINE. APPLICATION_ID = 222

  AND AELINE.GL_SL_LINK_TABLE = GLIMPREF.GL_SL_LINK_TABLE

  AND AELINE.GL_SL_LINK_ID = GLIMPREF.GL_SL_LINK_ID

  AND AELINE. AE_HEADER_ID = DLINK. AE_HEADER_ID

  AND AELINE. AE_LINE_NUM = DLINK. AE_LINE_NUM

  AND GLIMPREF. JE_HEADER_ID = JHEADER. JE_HEADER_ID

  AND JHEADER. JE_BATCH_ID = JBATCH. JE_BATCH_ID

  AND JHEADER. LEDGER_ID = T.LEDGER_ID

  AND JHEADER. STATUS                         = 'P'

  AND T.PERIOD_SET_NAME = BY. PERIOD_SET_NAME

  AND JHEADER. PERIOD_NAME = PER. PERIOD_NAME

  AND JHEADER. CREATION_DATE > =.

  TO_DATE (JANUARY 1, 1970 00:00:00 ')

  "MM/DD/YYYY HH24:MI:SS")

  AND DECODE (', 'Y', T.LEDGER_ID, 1) (1)

  AND DECODE (', 'Y', T.LEDGER_CATEGORY_CODE, 'NONE') ('NONE')

  * When I run this query, it takes a lot of run time without return no result (it took 4 hours to cancel it, I got the last time)

  my questions are:
  -What is the problem with this query?

  -How can I change the query in the workflow?

  could someone please help?

  Check if the session is reusable or non-reusable. If his re-usable, so you may need to modify the sql query in the window of the tasks

• DAC: tasks failed during the ETL for financial applications

  I'm looking for my first ETL on OLIVIER 7.9.6.4

  I use Oracle EBS 12.1.1 as source system.

  the ETL full 200 + tasks successfully, but it fails for the rest of them

  first task that fails is:

  SDE_ORA_GL_AR_REV_LinkageInformation_Extract

  
  Error message:

  All the batch jobs

  Lot of Informatica Session

  ------------------------------

  INFORMATICA TASK: SDE_ORAR1211_Adaptor:SDE_ORA_GL_AR_REV_LinkageInformation_Extract_Full:1: (Source: COMPLETE target: FULL)

  ------------------------------

  2013-09-03 14:57:14.627 acquisition of resources

  2013-09-03 14:57:14.643 acquired resources

  2013-09-03 14:57:14.658 INFORMATICA TASK: SDE_ORAR1211_Adaptor:SDE_ORA_GL_AR_REV_LinkageInformation_Extract_Full:1: (Source: COMPLETE target: FULL) began.

  FAULT INFO: Error executing: INFORMATICA TASK: SDE_ORAR1211_Adaptor:SDE_ORA_GL_AR_REV_LinkageInformation_Extract_Full:1: (Source: COMPLETE target: FULL)

  Message:

  Fatal error

  pmcmd startworkflow sv - infor_int d Domain_AMAZON-9C628AAE - u Linguiste2 Pei * f SDE_ORAR1211_Adaptor - paramfile C:\Informatica\server\infa_shared\SrcFiles\SDE_ORAR1211_Adaptor.SDE_ORA_GL_AR_REV_LinkageInformation_Extract_Full.ORA_R1211.txt SDE_ORA_GL_AR_REV_LinkageInformation_Extract_Full

  Status / / Desc: failure

  WorkFlowMessage:

  Error message: unknown reason 36331 error code

  Error code: 36331

  EXCEPTION CLASS: com.siebel.analytics.etl.etltask.IrrecoverableException

  com.siebel.analytics.etl.etltask.InformaticaTask.doExecute(InformaticaTask.java:254)

  com.siebel.analytics.etl.etltask.GenericTaskImpl.doExecuteWithRetries(GenericTaskImpl.java:477)

  com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:372)

  com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:253)

  com.siebel.analytics.etl.etltask.GenericTaskImpl.run(GenericTaskImpl.java:655)

  com.siebel.analytics.etl.taskmanager.XCallable.call(XCallable.java:63)

  java.util.concurrent.FutureTask$ Sync.innerRun (unknown Source)

  java.util.concurrent.FutureTask.run (unknown Source)

  java.util.concurrent.Executors$ RunnableAdapter.call (unknown Source)

  java.util.concurrent.FutureTask$ Sync.innerRun (unknown Source)

  java.util.concurrent.FutureTask.run (unknown Source)

  java.util.concurrent.ThreadPoolExecutor$ Worker.runTask (unknown Source)

  java.util.concurrent.ThreadPoolExecutor$ Worker.run (unknown Source)

  java.lang.Thread.run (unknown Source)

  (Number of attempts: 1).

  pmcmd startworkflow sv - infor_int d Domain_AMAZON-9C628AAE - u Linguiste2 Pei * f SDE_ORAR1211_Adaptor - paramfile C:\Informatica\server\infa_shared\SrcFiles\SDE_ORAR1211_Adaptor.SDE_ORA_GL_AR_REV_LinkageInformation_Extract_Full.ORA_R1211.txt SDE_ORA_GL_AR_REV_LinkageInformation_Extract_Full

  2013-09-03 15:15:01.346 INFORMATICA TASK: SDE_ORAR1211_Adaptor:SDE_ORA_GL_AR_REV_LinkageInformation_Extract_Full:1: (Source: COMPLETE target: FULL) has finished running with the Failed state.

  ------------------------------

  (Failed)

  After that, many dependent tasks fail

  log files of session at the "SDE_ORA_GL_AR_REV_LinkageInformation_Extract_Full_SESSIONS.log":

  =====================================

  STD OUTPUT

  =====================================

  Informatica (r) PMCMD, version [9.1.0 HotFix2], build [357.0903], 32-bit Windows

  Copyright (c) Informatica Corporation 1994-2011

  All rights reserved.

  Called my Sep 03 15:14:24 2013

  Connected to the Service of integration: [infor_int].

  File: [SDE_ORAR1211_Adaptor]

  Workflow: [SDE_ORA_GL_AR_REV_LinkageInformation_Extract_Full]

  Instance: [SDE_ORA_GL_AR_REV_LinkageInformation_Extract_Full]

  Mapping: [SDE_ORA_GL_AR_REV_LinkageInformation_Extract]

  Session log file: [C:\Informatica\server\infa_shared\SessLogs\. SDE_ORA_GL_AR_REV_LinkageInformation_Extract_Full.ORA_R1211.log]

  Success of the source lines: [0]

  Source has no lines: [0]

  Target lines of success: [0]

  Target lines failed: [0]

  Number of errors in transformation: [0]

  First error code [4035]

  First error message: [[error SQL RR_4035

  ORA-00904: "XLA_EVENTS." "" UPG_BATCH_ID ": invalid identifier

  Database driver error...

  Function name: run

  Stmt SQL: SELECT DISTINCT

  DLINK. SOURCE_DISTRIBUTION_ID_NUM_1 DISTRIBUTION_ID,

  DLINK. SOURCE_DISTRIBUTION_TYPE TABLE_SOURCE,

  AELINE. ACCOUNTING_CLASS_CODE,

  GLIMPREF. JE_HEADER_ID JE_HEADER_ID,

  GLIMPREF. JE_LINE_NUM JE_LINE_NUM,

  AELINE. AE_HEADER_ID AE_HEADER_ID,

  AELINE. AE_LINE_NUM AE_LINE_NUM,

  T.LEDGER_ID LEDGER_ID,

  T.LEDGER_CATEGORY_CODE LEDGER_TYPE,

  JBATCH.NAME BATCH_NAME,

  JHEADER.NAME HOSTHEADERNAME,

  BY. END_DATE,

  AELINE. CODE_COMBINATI]

  Task run status: [failure]

  Integration service: [infor_int]

  The integration of Service process: [infor_int]

  Grid integration Service: [infor_int]

  ----------------------------

  Name of node [node01_AMAZON-9C628AAE]

  Fragment of preparation

  Partition: #1 [Partition]

  Instance of transformation: [SQ_XLA_AE_LINES]

  Transformation: [SQ_XLA_AE_LINES]

  Apply the lines: [0]

  Number of rows affected: [0]

  Rejected lines: [0]

  Throughput(Rows/sec): [0]

  Throughput(bytes/sec): [0]

  Last [16004] error code, message [ERROR: prepare failed.: []]

  ORA-00904: "XLA_EVENTS." "" UPG_BATCH_ID ": invalid identifier

  Database driver error...

  Function name: run

  Stmt SQL: SELECT DISTINCT

  DLINK. SOURCE_DISTRIBUTION_ID_NUM_1 DISTRIBUTION_ID,

  DLINK. SOURCE_DISTRIBUTION_TYPE TABLE_SOURCE,

  AELINE. ACCOUNTING_CLASS_CODE,

  GLIMPREF. JE_HEADER_ID JE_HEADER_ID,

  GLIMPREF. JE_LINE_NUM JE_LINE_NUM,

  AELINE. AE_HEADER_ID AE_HEADER_ID,

  AELINE. AE_LINE_NUM AE_LINE_NUM,

  T.LEDGER_ID LEDGER_ID,

  T.LEDGER_CATEGORY_CODE LEDGER_TYPE,

  JBATCH.NAME BATCH_NAME,

  JHEADER.NAME HOSTHEADERNAME,

  BY. END_DATE,

  AELINE. CODE_CO]

  Departure time: [kills Sep 03 15:06:16 2013]

  End time: [kills Sep 03 15:06:16 2013]

  Partition: #1 [Partition]

  Instance of transformation: [W_GL_LINKAGE_INFORMATION_GS]

  Transformation: [W_GL_LINKAGE_INFORMATION_GS]

  Apply the lines: [0]

  Number of rows affected: [0]

  Rejected lines: [0]

  Throughput(Rows/sec): [0]

  Throughput(bytes/sec): [0]

  Last error code [0], message [no errors].

  Departure time: [kills Sep 03 15:06:20 2013]

  End time: [kills Sep 03 15:06:20 2013]

  Disconnection of Service integration

  Finished my Sep 03 15:14:59 2013

  =====================================

  ERROR OUTPUT

  =====================================

  the next task of fault is:

  SDE_ORA_APTransactionFact_Payment_Full

  Error log:

  java.lang.Thread.run (unknown Source)

  305 SEVERE kills Sep 03 11:19:43 GMT 2013 ask to start a workflow: "SDE_ORAR1211_Adaptor:SDE_ORA_APTransactionFact_Payment_Full with the name of the instance SDE_ORA_APTransactionFact_Payment_Full" finished with the error code 0

  306 SEVERE kills Sep 03 11:20:16 GMT 2013 ask to start a workflow: "SDE_ORAR1211_Adaptor:SDE_ORA_APTransactionFact_PaymentSchedule_Full with the name of the instance SDE_ORA_APTransactionFact_PaymentSchedule_Full" finished with the error code 0

  307 SEVERE kills Sep 03 11:20:18 GMT 2013 ask to start a workflow: "SDE_ORAR1211_Adaptor:SDE_ORA_APTransactionFact_Distributions_Full with the name of the instance SDE_ORA_APTransactionFact_Distributions_Full" finished with the error code 0

  308 SEVERE kills Sep 03 11:20:24 GMT 2013 ask to start a workflow: "SDE_ORAR1211_Adaptor:SDE_ORA_Stage_ValueSetHier_Flatten with the name of the instance SDE_ORA_Stage_ValueSetHier_Flatten" finished with the error code 0

  311 SEVERE kills Sep 03 11:22:14 GMT 2013 MESSAGE: no value for @DAC_SOURCE_PRUNED_REFRESH_TIMESTAMP available!

  I searched online but can't find useful information about errors

  could someone help, please?

  
  Another question: can I continue the ETL when it fails? without starting from the beginning?

  Hi Mate,

  Simply delete the duplicate value, it is not a problem

  Finally give the validation in your PB, make waiting in line and raise your execution plan...

  I'm sure that this task is now complete.

  It will be a great help on your side, if you share did you read me the article. and give me the number?

  I am also looking for a validation script now.

  Thank you

  Guylain

  mkashu.blogspot.com

• Informatica workflow fails with the CWB0111 error

  My environment: Informatica 9.0.1, CAD build a 10.1.3.4.1. patch.20110427.0538 Build date: April 27, 2011 on Windows server, databases - iSeries V6R1. Informatica connects to the As / 400 using an ODBC DSN name.
  
  When executing multiple maps don't fail with the following error code
  Severity: ERROR
  Timestamp: 2011-08-15 18:39:44
  Node: node01_HSCUSCHLWS00112
  Thread: READER_1_1_1
  Process ID: 113076
  A message Code: RR_4035
  Message: SQL Error]
  FnName: Pick-[IBM] [I pilot Access ODBC System] column 16: CWB0111 - a buffer passed to a system call is too small to contain the data back
  FnName: Pick-[IBM] [I pilot Access ODBC System] data type string truncation on the right.
  FnName: Pick-[IBM] [I pilot Access ODBC System] column 16: CWB0111 - a buffer passed to a system call is too small to contain the data back
  FnName: Pick-[IBM] [I pilot Access ODBC System] data type string truncation on the right.
  FnName: Pick-[IBM] [I pilot Access ODBC System] column 16: CWB0111 - a buffer passed to a system call is too small to contain the data back
  FnName: Pick-[IBM] [I pilot Access ODBC System] data type string truncation on the right.
  
  I searched on the web and it seems that the Linux/Unix driver for iSeries has some problems with Unicode, but my environment is Windows only.
  
  Any suggestions are welcome. Thank you!

  Did you follow all of the steps in your DB system specific Installation Guide? In particular, what exact ODBC driver are you using? Also, has confirmed the connection via the Client configuration wizard? Also found the following problem on a possible bug to theis URL: http://www.ibm.com/developerworks/forums/thread.jspa?messageID=14281148&tstart=0

  Hi all
  The problem is solved in half! This is a bug in the IBM driver.
  It's just exactly the same cause (locale) in the following thread:
  http://www.IBM.com/developerWorks/forums/thread.jspa?MessageID=14051384
  I think the problem is that the AS 400 (iSeries) responds with 30 characters and converted to UTF8 it is 31 bytes. This is a bug...
  If you want to ask more details, but in a nutshell, you need to assign some of your Linux/Unix environment variables what whatsoever NOT utf8!

  I hope this helps. If so, please check the response as helpful or appropriate.