DAG servers use only no storage Equallogic - HIT unsupported?

Similar Questions

• [Solved] Laptop only uses the SSD storage, not RAM storage at all - Dell Inspiron i7559

  I just got this laptop a few weeks ago and it gave me so many problems.

  I've used 217/256 GB of my SSD. However, my laptop comes with 8 GB of RAM, which I have no idea how to access.

  Is it possible that I can use my RAM storage?

  or should I just buy an SSD with a storage more...?

  onionbulb

  I just got this laptop a few weeks ago and it gave me so many problems.

  I've used 217/256 GB of my SSD. However, my laptop comes with 8 GB of RAM, which I have no idea how to access.

  Is it possible that I can use my RAM storage?

  or should I just buy an SSD with a storage more...?

  RAM is not for storage.

  You'll want to buy a larger SSD.

  But with an SSD of larger and is delivered with all questions of current hard drive cloning etc..

  Good luck.

• Can someone direct me to resources on how you get TWO esx servers to the same storage array?

  Hi all

  I use:

  2 x Compaq DL380 G2 with 5i

  cards controller 5300 AND attached to the base storage Bay

  STORAGEWORKS ENCLOSURE 4354R RM DOUBLE PORTS U3 (not yet pregnant

  compatibility list).

  The first server appears to see the good in the console of the virtual server storage Center.  The second server will see s for only its own storage room tho.  How do both to see and use the same storage.  The concept is new to me, but trying to learn.  Is there something I need to see the same storage in the virtual Center for TWO machines esx Server?  All IM just not in the right place?  Thank you.

  http://communities.VMware.com/thread/78873 was a previous thread on this can enlighten us. Looks like the 4354R has the bus is divided into 2 x 7 disks and each connector in the back can 'see' 1 of the two buses. The quickspecs (http://h18000.www1.hp.com/products/quickspecs/10624_div/10624_div.html) refer to "... allows access to two areas of storage separated from two different servers. So the first "thing" would be to get two buses attached together inside the unit so that the two connectors on the back see all readers, you must get the endpoint SCSI disabled on the device (you want termination on each 'end' of the cable that is two SCSI adapters in the servers).

  While you might be able to get the 4354R shared between the two ESX hosts, you can also get all the benefits of the shared disk + the possibility of vMotion, etc. by implementing the 4354R known as iSCSI or NFS storage. It also swings you back to something that is 'supported '. To do this, you have two approaches

  1. Fix 4354R on one of the ESX boxes, create a virtual machine that has access to the entire disk on the 4354R and run something like OpenFiler in the virtual machine to 'share' the disk via NFS or iSCSI

  2. Set up a 3rd server if you have one available and run the version of "bare metal" OpenFiler, or install Linux or OpenSolaris distribution and configure NFS and/or iSCSI target.

• When to use a persistent storage?

  Hi all

  I have created applications that use the persistent storage, and I created applications that use a SQLite database.  I also have applications that use both.  My question is this:

  Persistent storage should be limited to what it stores?  For example, should persistent storage serve more for purposes of storage of simple things like "font size selected user for the application" and "a hash of default language table and its code of language of the application"?  Alternatively, could also be recommended to act almost like a database, for example when a user does not have an SD card installed - in which case store you several vectors of objects and others?

  Is there a possibility of persistent storage is only not available due to limited space?  For example, if the user has a large number of other applications that use the persistent storage?

  Finally, I believe that persistent storage is only erased in the event of a battery pull, etc..  Is it also possible to delete in other ways, like a reboot?

  Thank you!

  I look at the characteristics of the data I store and the characteristics of the options (SQLite, folder on card SD or PeristentStore) and make a decision on this basis.

  The highlights for me are

  (a) the size of the data

  (b) requirement of presence

  (c) the use of the data

  (d) deletion of data

  Working through these:

  (a) size

  There is a reasonable amount of available devices, as well as more than PeristentStore.  If you have a vector of strings of 10,000, each 100 bytes long, it's always only! MB of storage.  And there are managers of low storage that you can listen to and store your use of the PersistentStore.  But there is more space on an SD card, and no chance to shake the Blackberry is that you use up too much memory (if you use PersistentStore the unit clears things like the old emails that can disrupt your users).

  (b) requirement of

  Don't forget that your users can remove the SD card and all data

  (c) the use of the data

  If the data lends itself to using an object of mode, it seems an appropriate way to store it in this form, which means that there is no "Serialization" required to make it a flat file or the conversion into a table.  But things like images, audio files and gain no advantage being stored as object.  So stick them on the SD card.

  (d) remove

  PersistentStore is deleted when the application is removed, which can be a good thing.

  In summary, there is no right answer here, use the best option for the job you have.

  With regard to your questions:

  "Is there a possibility of persistent storage is only not available due to limited space?

  Yesish, as mentioned, it is the low Storage Manager.  But to be honest, you can store megabytes of data in a table like structure in PersistentStore, and as long as you're careful, it will work fine.

  "I think that persistent storage is only erased in the event of a battery pull.

  No, it remains on a battery pull.  To clear, regular forms are to wipe the device, or remove the application that uses it.

• Use a persistent storage or other methods to synchronize

  I have a user interface class that communicates with a background class by sending commands with world events to the base class. Two of them also uses a persistent storage.

  A simple method to retrieve return values could be to use a persistent as this storage:

  The user interface does:

  1 clears the back entrance in a persistent storage

  2 send the world event.

  3. going in a loop with a Thread.sleep and check if the back entrance is always empty

  After a number of loops decides that no response will be provided.

  The background task does:

  1 housing starts by accessing persistent storage in order to block with synchronization

  2 performs at the request of action

  3 put the result in the return of persistent storage field

  4 out of sync

  It sorts of handset return results and waiting for results. If the background task is not there the user interface will break out of the loop with a blank back. The only uncontrolled situation would be if the background task fails

  along the way, but then I have other problems. I threw an eye to wait/notify, semaphores and others, but the easiest solution is to use a persistent storage, because it has been used in any case for return information.

  Or expertise in this forum suggest another approach?

  A single Thread.yield is very good indeed, but if you put the user interface in a loop, just treatment Thread.yield () and the test for completion, instead of blocking your Thread event you will be hogging your event Thread and the operating system can get mad that too.

  As to notify the Ui that a message has been processed, Yes, the Observer Interface to do this.

• How to configure the VM of Windows Server 2012 to use a replacement storage adapter

  Hello

  I want to install Win Server 2012 assessment on the 11.0.0 Workstation assessment. But there is a problem:

  

  And according to this article:

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 2059549

  It seems that I need to configure to use a replacement storage adapter. But I can't find a relative configuration on my workstation.

  Best regards

  A download cannot certainly be corrupted, even if it seems normal... The only way to be sure is to compare the size of the file and checksum of the file MD5 or SHA1 against those reported on the download site.

  If you have verified the integrity of the file on the source and it still does not work, please send the file vmware.log of the directory of the virtual machine as an attachment and I'll take a look.  To attach a file, look for the Browse... button when you compose your answer... it'll be just above the key Message Post - please do not copy - paste in a response.

  Thank you

  --

  Darius

• Hi people. Intend to purchase Apple Watch USA and use it in Europe. Will this be a problem? Can I use only a simple switch of 3rd party? I'm going to hurt same hardware or software?

  Intend to purchase Apple Watch USA and use it in Europe. Will this be a problem? Can I use only a simple switch of 3rd party? I'm going to hurt same hardware or software?

  Hello

  You will be able to use the watch in Europe.

  There is no regional differences in the hardware and the software can be configured to your chosen region. The supplied USB power adapter will have to pine trees located in the United States. A travel adapter will allow you to connect it to the European outlets.

  Alternatively, you can buy an Apple USB power adapter that is located in your country of destination / country.

  For example:

  • 2-pole:
    • http://www.Apple.com/FR/shop/product/MD813ZM/A/Adaptateur-secteur-USB-5-w-Apple? FNODE = 83
  • UK 3-pin:
    • http://www.Apple.com/uk/shop/product/MGRL2B/A/Apple-5W-USB-power-adapter-folding - pins? FNODE = 83

• Any possibility using only the built-in GPU?

  Mac OS X 10.11.6

  MacBook Pro(Retina,15 ",2015 mid)

  With graphics cards AMD one dedicated

  I wonder if it is possible to use only the GPU integrated while playing games. Cause I discovered that some games are no need to use the AMD GPU, but it is automatically switched to the dedicated GPU and drains the battery.

  Hope there is a solution for this problem. Thank you!

  It is somehow a conditional scenario suggested in this article

  on how to make some graphics settings may remain in service, here:

  • Set performance on MacBook Pro - Apple Support chart

  • MacBook Pro: how determine what GPU is in use - Apple Support

  {These links seem to show older versions of material your model}.

  Don't know if there is a way hidden within the system to change the default to

  stay on the one you want to be the first choice; Maybe in the command 'terminal '?

  In any case...

  Good luck in this case!

• Use only a part of a track when adding music to a slideshow

  Is it possible, and if so, what are the steps to add only a part of music followed by a slide show? With the help of photographs. 1,5.

  Thank you!

  Hello mjfriedman,

  Please use the Apple Support communities to post your question. Photo slideshows are a great way to show these great pictures of your collection. To use only a part of the track in your project, you will need to use another application to cut and edit the track first, before add you it to the slide show. GarageBand is an excellent application which can be used to change the part of the track that you want to use with your slide show. Please see the links below for more help.

  GarageBand help

  GarageBand for Mac: divide the regions in the field of securities

  Share the songs on iTunes

  Photos for OS x: creating and working with slideshows

  These links should help you with the sharing and use of this track in your project. The end result is going to be great!

  Have a great day.

• 2 slots for ram, or I can use only a single slot?

  Hello..

  IV ' e bought 8 GB of ram for my MBP 2012 has 4 GB of memory.

  But I totally forgot that she has 2 slots for ram!

  so you can use only a single slot? or I have to buy another ram?

  Thankss

  For best performance Mac need pairs of corresponding RAM modules, swap or buy more is recommended all things being equal. I would however expect sentencing of incompatibility performance much smaller than the benefit of the upgrade beyond 4 GB, so you could run with 8 GB in a slot and the original 2 GB in one for 10 GB total installed.

• 6 sending to an iphone video to youtube (source UTube's cell phone) to a mountain BIKE if there is NO wi - fi, which uses only the airport.

  Cans an iphone 6 send video phone to an ATV if No. wi - fi exists, that uses only the airport.

  Unless both the phone and the ATV are connected to a WiFi network no.  If you want to watch content from an iPhone connected via cell phone on a TV purchase a lightning of Apple to the HDMI adapter and forget about wifi and Apple TV.

  Use AirPlay to stream content from your iPhone, iPad or iPod touch - Apple Support Wireless

• Standby power problems M30-344 (CPU uses only 600 MHz)

  Hello!
  In my m30 344 motherboard and display are changed.
  Now I can't use the full 1.5 ghz cpu!
  In the power saver profile I can choose only the cpu rate of 1-3! I've now uninstalled this tool and reinstalled the version by the net. But I can use only 600 mhz!
  What can I do?

  [Edited by: admin 7 May 05 08:18]

  Hello

  As far as I know if the motherboard is changed the speed of the CPU will be around 600 MHz and in this case the service partner needs to update the CPU microcode. After that, the speed of the processor will be as before.

  I hope that you have already solved your problem with the speed of the processor.

• Re: Is it possible to completely recover VistaOS using only the recovery DVDs?

  Hidden WinRE partition has been deleted by mistake, but I still have the original recovery DVD for my A200.
  Is it possible to completely recover VistaOS without the WinRE partition, using only the recovery DVDs?

  Of course.
  The Toshiba Recovery CD is designed to recover the laptop.
  Using the recovery CD you will get factory settings.

  But note; the Toshiba Recovery CD format the whole HARD drive and erases the HARD drive partitions.

  Welcome them

• Tecra A7 with W7-64 b uses only 3 GB to 4 GB of RAM available

  Recently, I upgraded my Tecra A7-243 with XP 32 b of 2 GB to 4 GB of ram.
  XP 4 GB has recognized and used as expected only 3 GB of RAM.
  Now, I have installed Windows 7-64 b (full installation with format system partition).
  But W7 reports still installed 4 GB memory of the whitch used only 3 GB.
  How can I force W7 to use all 4 GB of memeory?

  Hello

  The BIOS recognizes the full 4 GB of RAM?
  Also check DirectX (in execution type dxdiag).

  If the 4 GB of RAM would be mentioned here, so I guess that everything is ok with the notebook and the part of RAM is allocated by the graphics card.
  Stocks GPU, a part of the main memory... it runs automatically.

• A80: CD-ROM uses only PIO mode?

  Hi, I have a laptop A80, properly up and running fine...
  But if I try to burn a disc with Nero or Recordnow it often breaks down and the buffer to be missed...

  I checked the IDE control settings:

  the primary controller is very well and uses the Ultra DMA 5, but secondary to the cd-rom use only PIO although "DMA if available" is enabled!

  is this normal? I did a bios update, but that did not help...

  pls help me!

  (Sorry for my bad English)

  Hello

  Well, as far as I know, that it should be possible to change these settings manually.
  But I think s an operating system. I found on the Microsoft site info than after the Port IDE/ATAPI Windows driver (Atapi.sys) received a total of six time-out or cyclical redundancy (CRC) check errors, the pilot reduced the speed of communication (transfer mode) since the above basic mode (DMA, Direct Memory Access) to lower DMA modes in steps.
  You should visit this site. I m you will find a solution for this problem.

  http://support.Microsoft.com/?kbid=817472

  Good bye