damaged files

Similar Questions

• Cannot start because of missing or damaged file: \Windows\AppPatch\drvmain.sdb.

  Everything was fine when last stopped.  Then this error message.  Cannot get to anything that will open any program or allow me to run a CD.  Cannot start because of missing or damaged file: \Windows\AppPatch\drvmain.sdb.  Cannot run CHKDSK or use reinstall the CD because there is no place to run is.  Cannot get to Norton to uninstall.  Help!

  Hello

  If we can start safe mode?

  If so, we can perform Clean Boot Troubleshooting:

  http://support.Microsoft.com/kb/310353

  http://support.Microsoft.com/kb/316434

  If this isn't the case, then we might need a Windows XP CD in order to move forward.

  Let us know.

  Best regards

  Matthew_Ha

• Windows cannot start due to a missing or damaged file

  Original title: using a NETBOOK, WINDOWS can NOT START due to a MISSING OR DAMAGED FILE

  error message. Windows\System32\Config\System

  Let me guess that your netbook from brand not specified and the model has no CD/DVD drive and you have no real media installation of XP and before the incident and during the execution of XP, your system suffered a power failure, power failure, aborted restart or an abnormal termination?

  This is not an insurmountable problem in the world today... it happens all the time in these forums.

• Explorer Windows has stopped working. Name of the damaged file: wmp.dll

  Original title: Windows Explorer has stopped working

  There seems to be a lot of discussion on this issue.  I tired some of the patches, but some of my numbers seem different from what other people have.  The problem is on my laptop.  I try to connect to my router and have internet access.  My office is a new computer with Windows 7 installed.

  When I try to open my network center and sharing on my laptop, the computer thinks for a while, and then I get the Windows Exporer stopped working window.

  ProblemEvent name: InPageCoFire

  Error state code: c000009c

  Type of media loopholes: 00000003

  Name of the damaged file: wmp.dll

  The system version: 6.0.6002.2.2.0.768.3

  Locale ID: 4105

  Additional information 1: fd00

  Add information 2: ea6f5fe8924aaa756324d57f87834160

  Add information 3: fd00

  Add information 4: ea6f5fe8924aaa756324d57f87834160

  I am at a loss!

  Thank you

  Kevin.

  Hey Kevin,

  You will need to run the command above in the elevated command prompt.

  Refer to this step help: How to run a command with elevated privileges?

  After you run the command of high fashion, you should get the message, "" DLLRegisterServer in wmp.dll managed."

  Also, you can run the method 2 regardless of the success or failure of the method 1. Please try these methods first and see how it goes.

  Normally, it is appropriate to fix this problem by running SFC scan and you would not need to copy the file.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error message on my Vista computer: missing or damaged file: C:/windows/system32/drivers/ATAPI.sys. (Status: OXC0000098). NO RECOVERY DISK! (lost).

  Missing or damaged file: C:/windows/system32/drivers/ATAPI.sys. (Status: OXC0000098). NO RECOVERY DISK! (lost). How can I recover my system, if possible? It does not even start.

  Do you know when this problem started?  Try a system restore to a point in time BEFORE the problem started.  Here is the procedure: http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/.  Don't forget to check the box to show more than 5 days of restore points.  If the first attempt fails, then try an earlier point or two.  NOTE: You will need to re - install any software and updates that you have installed between now and the restore point, but you can use Windows Update for updates.

  If the system restore does not work, do a startup repair, boot from the disk Installation of Windows Vista genuine (or one that you can borrow from someone) or a recovery disc.  Here is the procedure: http://www.bleepingcomputer.com/tutorials/tutorial148.html.  The Startup Repair tool can repair atapt.sys.  You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD.  To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation.  Push it quickly. Make the changes, save your work and exit.  Put the CD in the drive and reboot.  When you are prompted, press any key to boot from the CD.

  If you do not have a floppy disk, you can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD.

  If this does not work, try to start in safe mode (click on the F8 key during startup and go into safe mode with network - or using the prompt from the disk, if necessary, several times).  Then we will check some of your system files:

  Go to start / all programs / accessories / command prompt and right click on command prompt, and then click Run as administrator (skip thiis step if you use the disk)...

  Type sfc/scannow, go and let it run.  It will scan and try to correct some of your system files.  If all goes well he comes complete with no corruption, it could not repair (if it has these post of corruption here or try to analyze it to find the problem or files using http://support.microsoft.com/kb/928228.  In a best-case scenario, he'll fix Atapi.sys.

  While in the command prompt, type chkdsk /f /r and enter and let it run.  It will scan and try to solve any corruption or bad sectors on your hard drive and remove especially as a cause.

  If it does not, then thanks for posting any repetitive error message in Event Viewer on startup (Start / Control Panel / administrative tools / event viewer - type eventvwr and enter, if do it from the command prompt).  Here's how to use Event Viewer: http://www.bleepingcomputer.com/forums/topic40108.html.

  I hope this helps.  Post back the results of the analysis and attempts to repair if these do not work.

  Good luck! Lorien - a - MCSE/MCSA/network + / A +.

• When I connect and the home screen appears I get this message: DLL environment initializeO-multiple Logger could damage files.

  Original title: Logger initialized O

  When I connect and the home screen appears I get this message: DLL environment initializeO-multiple Logger could damage files. What should I do? Thank you - E.Schmidt

  Hello
  
  1 how long have you been faced with this problem?
  2 did you recent hardware or software changes to your computer before this problem?
     
  Try to perform the clean boot on the computer.
   
  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".
   
  Follow the steps provide in the article below to perform the clean boot. http://support.Microsoft.com/kb/929135

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Repair damaged files

  MY computer laptop windows 7 has some damaged files is there a way to fix it?

  Right-click on the file or folder and then click on restore previous versions.

  You will see a list of the available versions of previous of the file or folder. The list will include files saved on a backup (if you use Windows backup to back up your files) as well as restore points.

• Issue of the Adobe Creative Cloud missing or damaged files

  I tried to open Adobe Creative cloud so I could download Illustrator, and when I tried to open it, it says there were missing or damaged files and download again. But before Adobe Creative Cloud even has finished installing, the same box popped up and asked me to do the same thing again. I had tried the same thing 3 or 4 times over, and it has not worked once. I am a PC user, and I would really appreciate if someone can help solve the problem. Thank you.

  Please follow the steps below: -.

  1 - uninstall the Adobe Creative cloud Control Panel application. (https://helpx.adobe.com/creative-cloud/help/uninstall-creative-cloud-desktop-app.html)

  2 remove Adobe Application Manager and OOBE folder of

  C: drive and navigate to C:\Program Files (x 86)------\Adobe "Common Files".

  3 - remove the folder Adobe Creative cloud of C:\Program Files (x 86) \Adobe.

  4. Remove AAMUpdater and OOBE [system drive]: \Users\ [user name] \AppData\Local\Adobe

  5 reinstall the creative application of cloud at the bottom of the link

  https://creative.Adobe.com/products/creative-cloud

  I hope this helps.

  Kind regards

  Vivet

• Damaged files Adobe Muse site and cannot be opened

  Hello

  I designed my first site on Adobe Muse.

  However, when I tried to open the file to continue designing, a message popped up saying "damaged files Adobe Muse site and cannot be opened.

  I read the previous discussions on the same issue:

  -The file is stored on my mac, not synchronized Dropbox or any other software.

  -I have not yet published the site.

  -My machine did however turn off due to load shedding while the application of the Muse was open (but not the file). Would this have something to do with it?

  Is it possible to recover the site?

  
  

  Thank you
  

  
  

  Hello Akshay,

  No worries, everything has already redone.

  Kind regards

  G

• Damaged file Site Muse

  I wonder if there is some way I can repair my damaged file of the Muse site.

  Please send us the .muse file at [email protected] as well as a link to this topic for the context and we'll take a look inside. If the file is larger than 20 MB, you can use a service like Adobe SendNow, Dropbox, WeTransfer, etc.. Thank you.

• LR3 unsupported of damaged files

  As I went to LR3, I had a lot more files developed as unsupported or damaged.  I am inclined to believe that the LR3, which is damage files. It happens with tiff, psd, cr2 files. All the files, I was able to work with sometime.  Needless to say that I am borderline angry as his summer passes to the files I've worked with recently and that the gods would have it his summer to those who want to buy or publish.  I can't open files in photoshop either after they were damaged.  Someone now why this is happening, or what I can do to prevent it? I'm afraid to use LR3 basically because I'm afraid its going to damage another valuable image...

  Sorry, I know almost nothing about power. I know that it is better to keep copies of all your images in archives on a separate physical device (and off site if the images are valuable to you).

  Looks like your Drobo is not faithful to its hype.

  HAL

• Damaged file... It can be recovered?

  I created a Captivate 3 file and tried to open it just a normal folder, she was the icon 3 Cp beside him. Captivate 2 tried to open it, which has corrupted the file. Now when I try to open it from Captivate 3, it indicates that the file is damaged. Is it possible to recover the damaged file?
  
  < captivate 1 and 2 are always on our system, because we have many projects that would not be the time to convert the most recent version. I've never had a problem with the transition between Captivate 1 and 2. >
  
  Thanks for your help,
  
  Matt

  Hi Matt

  The first thing I would try is to simply restart the PC. Assuming that the file still hesitates and refuses to open, the next thing I would try is to create a new empty file of the same size. Then click file > import > slides/objects and see if you can get them in this way.

  Good luck to you in the sort it... Rick

• Cannot start MS M30 due to damaged files

  Hi people,

  I am a proud owner of a Satellite Pro M30. Way I wanted to start the laptop today he said theres a file damaged \windows\system32\coonfig\system.

  I had a look at the website mocrosofts and found the solution for the problem: How do I recover from a corrupted registry that prevents Windows XP startup
  But the problem is - it does not work with the product recovery CD. I don't know what to do now, I really need help!

  THX

  Hello Seppl

  If you try to repair the OS, I have to say that you will not be able to do using the restore CD. Restore CD contains recovery image and repair option you must use the facilities of Microsoft CD. Maybe some friend of you's original facility Microsoft WXP CD.

  Using the recovery CD, you can do the clean operating system installation.

• How can I fix the damaged file sql server database ME?

  Standby my mdf file got damage due to unknown reasons then I used the command dbcc chekcdb but it failed, file MDF is important to me, I don't ' know how to recover data from the mdf file. Please anyone suggest me?

  You are looking for a good solution recover a damaged repair Toolbox for SQL Server database, and then use the SQL recovery tool is an efficient MDF file recovery solution that allows the user to repair and recover a database corrupted in just a few minutes. Learn more https://www.repairtoolbox.com/sqlserverrepair.html

• XP Home-ed: Spoolsv.exe; Scanost.exe and Scanpst.exe damaged files-(outlook 07). Restore the functionality does not.

  I have XP Home-ed with service pkg 3: I had a number of problems occur simultaneously in Sept. 2011. Outlook 07 will begin to open, then plant, and when I tried to print I get a Script error msg. I sort the MS Fix - it service and tried to reload the printer driver and reinstall Outlook, but nothing has worked.

  Checking, I found Spoolsv.exe service was turned off, turned on then, but then error SCRIPT and spooler turns off when you try to print. Further investigation found Scanpst.exe damaged and files-Scanost.exe (outlook 07). MS Restore feature has stopped working.

  Automatic update of virus or suspect MS. I have Norton 360.

  Proski

  Hello

  • This only occurs when printing from Outlook?
  • You are able to print using all other Windows applications as Internet explore?
  • What were the changes made before the issue occur?
  • How long have you been faced with this problem?
  • Who solve that you ran?
  You can check this link:
  Resources for the resolution of the printer in Windows XP problems
  http://support.Microsoft.com/kb/308028
   
  See the following steps:
  Go into "start |" Run ', copy the following line and paste it into the line run

  regsvr32 ole32.dll

  Note: There is a space between "regsvr32" and "ole32.dll") and click OK.  See if that fixes the problem.

  If the previous step fails then I would suggest that you post your request in Outlook forums for better resolution.
  http://social.answers.Microsoft.com/forums/en-us/outlookacct/threads
   
  See also:
  How to fix script errors in Internet Explorer on Windows computers.
  http://support.Microsoft.com/kb/308260