The system restore restart virus?

Similar Questions

• Cannot restore the system after a virus attack

  After infection by several virus Trojan horse my computers hit by the old blue screen of death.

  The system can operate in safe mode with networking, but will not boot normally without returning instantly to the blue screen.
  The system restore program will not work in safe mode, because he says has no date set to roll back, when I try to set a date to roll back it comes to properties system saying that it should be returning it on the system protection.

  All the solutions to put an end to my plague of blue screen and a restorableness?

  Hello!

  Sorry, but I think that in this case, the only solution is to reinstall Windows. :(
  If SafeMode doesn t you nothing and sometimes viruses destroy the system roll back function.

  I had a similar problem a few months back, and the only solution is to reinstall Windows. I had no change to remove the virus.

  Good luck!

  Good bye

• After a virus, I've lost the system restore for cannot defragment now. Also lost system tools/options.

  Original title: after a virus, I've lost the system restore for cannot defragment now

  I had a virus which caused problems one of the minor being I've lost the system tools. It now says its empty when I open it.

  You don't need system defragmentation tools.

  You can defragment from the hard drive, then right-click of your hard drive, properties, tools, defragment now.

  Of course, you must fix your missing tools too.

  Here's the easiest way I know (thank you, Ramesh):

  http://WindowsXP.MVPs.org/accessories.htm

  Part of the answer to the technical support engineer Microsoft does not too which make me think that the MSE has never actually tested this Board to see if it actually works or not.  It's a shame.

  In addition, these shortcuts are not part in the folder in any case.  These things must go in the folder for all users - if you don't want your XP to be ignored.  It is a source of embarrassment.

  I don't know what you used to remove the virus, but I could do that at some point (soon):

  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.

• XP hang on to the restoration of the system during installation error: no changes have been made to your computer to choose another restore point restart the system restore

  Original title: XP hang up to the restoration of the system during the installation

  During the configuration of the system in the process of getting XP to hung up on the screen of the system restore

  The message says:
  No changes have been made to your computer
  To choose another restore point, restart System Restore
  To restart System Restore, click Home
  The jury of the mouse and the button doesn't work so I can't click Home tab
  Help

  Hello

  Why you try to run the system restore?

  Step 1: Check if you are able to complete the restore of the system in safe mode.

  Step 2: Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

  Reference:
  Using the event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_event_viewer.mspx?mfr=true

  Understanding of event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/event_overview_01.mspx?mfr=true

  Procedure to view and manage event logs in Event Viewer in Windows XP
  http://support.Microsoft.com/kb/308427

  For more information, please see the following article.

  Steps of troubleshooting for problems when you try to use the System Restore tool in Windows XP

  http://support.Microsoft.com/kb/302796

• I have XP and had a virus. I removed the virus, but now the system restore will not work. I tried Safe Mode but clings to the confirm restore point selection. Help

  System Restore will not work

  Hi FriendFriend,

  1. did you of recent changes on the computer?

  2. do you have security software installed on the computer?

  3. you receive an error message when running the system restore?

  I suggest that you put the computer in a clean boot state, and then try to clean boot.

  It is possible that some third-party programs installed on the computer is causing the problem.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  If the previous step fails, then view the event logs to examine the system restore service errors.

  (a) click Start, click run, type eventvwr.msc/s in the Open box, and then press ENTER.

  (b) click on the category System .

  (c) click the Source tab to sort by name, and then look for "sr" or "srservice." Double-click each of these services and then evaluate the event description for any indication of the cause of the problem.

  Steps of troubleshooting for problems when you try to use the System Restore tool in Windows XP

  http://support.Microsoft.com/kb/302796

  Procedure to view and manage event logs in Event Viewer in Windows XP

  http://support.Microsoft.com/kb/308427

• Browser crash, restart on its own, can not do the system restore. Help!

  OK, so I tried EVERYTHING I know how to do, and some things I did research.

  Whenever my computer restarts itself, I get an error message saying that there is a faulty driver.

  I checked my drivers with the audit tool, nothing.

  I uninstalled all unnecessary programs I could find (nothing critical, just programs like Glary Utilities, Acrobat, Flash etc..).

  Eventually I got to a point where everything I did was to get worse, and my computer told me that Windows did not start upward.  I rebooted in safe mode and tried to do a system restore.  Cannot restore point to restore I get an error indicating that the system restore was not successful.  I tried FOUR different restore points.

  I'm at my wits end!

  I don't have my Windows XP cd, or one of the disks with the computer came.  This used to be my computer at work, but let me keep as part of my departure, so all the disks are in the old company.

  Please help :(

  Computer: Dell
  Intel Core 2 Duo 2 G of RAM, Windows XP Professional

  (For some reason, the police in your post is a very light gray!)

  Please transmit the full text of the error message.

  You used the phrase "everything I've done." In addition to uninstall unused programs, what else do you have?

  If your company gave you this PC, they should have you good discs too. Fortunately, Dell XP Pro installation CD are ubiquitous and interchangeable. First of all, contact Dell to see if they can issue you a. Otherwise, see if anyone you know has one.

  A number of security (for example, Norton and Zone Alarm) programs interfere with the restoration of the system. If you identify your security programs, we can tell you how you can get the system restore to work. For now, these pages can help:

  http://bertk.MVPs.org/html/srfail.html

  http://bertk.MVPs.org/html/symantecdoc1.html

  You should be able to disable your restarts automatically in this way:

  http://pcsupport.about.com/od/tipstricks/HT/disautorestart.htm

  Finally, what is the status of this PC malware?

• A Virus infect my computer from the system restore?

  My computer has been infected recently by (I think) a kind of malware that would be redirecting My search Google results (with a warning of Google chrome that the site had a low signature) and remove Windows Defender. I tried many possible solutions on the internet, but none of them worked. In the end, I decided to do a system restore to about two days before, he started, and my computer seems to work very well.

  After the restoration of the system, I installed AVG Antivirus (paid version / pro) and did a full scan of the computer. I think he deleted something like that harmful things we found on my computer.
  Now, three days after the system restore, I've read a few articles and questions on the internet that says a system restore does not remove a virus and that she could hide in the system restore files. I don't know if this is related, but some sites will not load for me (like 'wiiublog' and 'malwarebytes' Web sites), and when I check on another site (like 'downforeveryoneorjustme'), he says that the Web sites are on the rise. In addition, some Web sites load with just the words and links, but no images.
  The virus infect my computer in system restore files? It still does damage to my computer?
  If so, is there something I need to check my files system restore (I read that you need to turn off and do another scan, but I don't want to do anything without first aid)?
  I am running Windows Vista Home Premium Service Pack 2.
  I also Iobit Advanced Systemcare running.

  On Wednesday, May 9, 2012 23:09:41 + 0000, bt2004 wrote:

  My computer has been infected recently by (I think) a kind of malware that would redirect my Google search results (with a caveat
  Google chrome that the site had a low signature) and remove Windows Defender. I tried many possible solutions on the internet, but none of them worked. In the end, I decided to do a system restore to about two days before, he started, and my computer seems to work very well.

  If this is the case, no matter what your problem was, it was probably not
  malware. A system restore is rarely effective in eliminating
  malware.

  After the restoration of the system, I installed AVG Antivirus (paid version / pro) and did a full scan of the computer. I think he deleted something like that harmful things we found on my computer.

  In my opinion, AVG, who was one of the best anti-virus programs
  is no longer. There are several better choices:

  For an anti-virus program, I recommend eSet NOD32 or Kaspersky, if you
  are willing to pay for it. If you want a free anti-virus, I recommend
  (do not run more than one antivirus program) one of the following
  three:
   
  Avira AntiVir
  Avast
  Microsoft Security Essentials
   
  You also need anti-spyware software (even if you run a program such as)
  Microsoft Security Essentials, with integrated anti-spyware capability
  It). I recommend that you download and install MalwareBytes (freeware)
  AntiMalware

  Now, three days after the system restore, I've read a few articles and questions on the internet that says a system restore does not remove a virus and that she could hide in the system restore files.

  An infection in a restore point is completely harmless, unless you
  restore from this restore point.
  The only way to remove the virus is to turn off System Restore, then again, but who's going to delete all the your restore points, not just the one (s) infected. Alternatively, you can just wait for the points that are infected at the end of the chain - a maximum of 90 days of fall.
  My preference is to wait 90 days.

  Ken Blake, Microsoft MVP

• Virus will not let run me the system restore, and I can't understand how to run a system recovery because there is no return upwards for this computer. It's a basic vista.

  When the computer starts, it must choose to leave a program unknown to the system access everything else it shows is a black screen. When you click on allow, he pulls up a virus scanner that says he has all sorts of viruses, but the program is the virus itself, because this virus program is not really on the computer. When you try to run the system restore, it says that this option has been disabled by the administrator. Also, I can't find how to run a recovery of the system and start the computer to its original settings. Help, please. It's not my laptop which is having this problem, but my roommates computer. Thank you for your time, I've ran out of ideas and was seriously in need of a little help. I tried to repair the system running through prerssing F8 in the boot menu and has not worked. also try the system restore via the SafeMode command prompt does not work either.

  Download Malwarebytes' Anti-malware using another machine. Install it in the
  your roommate infected computer in safe mode and run. Accept all default settings.
  Don't forget to do a backup when offered. I hope you find and
  eliminate the infection.
   
  "crashbbandicoot" wrote in message
  News: 351ebb9b-60aa-47 d 2-9b 13 - e309f4ee035b...
  > When the computer starts, it must choose to leave a program unknown
  > access the system all that it shows is a black screen. When
  > you click on allow, he pulls up a virus scanner that says that there are all kinds of
  > but the virus program is the virus itself, because this virus program is
  > not really on the computer. When you try to run the system restore it says this
  > option has been disabled by the administrator. Also, I can't find how to
  > system recovery and boot the computer back to its original settings.
  > Please help. It's not my laptop that is having this problem, but my
  > computer of roommates. Thank you for your time, I'm out of ideas and
  > seriously needed a little help. I tried already running
  > repair system through prerssing F8 in the boot menu and has no
  > work. also try the system restore via the SafeMode command prompt has no
  > not work.
  >
   
   

• By using the system restore before computer restart after updating Windows 10...

  I chose to try the upgrade of Windows 10 on my laptop primary.  Because of the long installation times, I started late in the evening then followed finishing (or almost) the update the next morning.  Until I sat down to 'start' I spoke with a friend who had just completed an installation of two heavy day of problems.    Although I am good enough to solve computer OS and software installation problems, I was very reluctant to go forward.   After serious soul searching I elected continue to use Windows 7, I don't really like.

  That's why I chose to use the system restore before restarting my computer needed complete Windows Update 10.  I chose the previous restore point before the update of windows 10 and ran through the entire procedure and then restarted the computer after the restore point.

  Everything worked fine and I was able to do the foregoing... Except that I can't do updates of security that have been uninstalled.   The Windows Update screen repeat "you must restart your computer...". "with the reboot by holding the active button.

  This window doesn't go away even after reboot, and I can not "check for Updates".

  Does anyone have any suggestions on how to reset this program if I can do all the updates except Windows 10 security.

  Thank you for any assistance.

  By using the system restore before computer restart after updating Windows 10...

  Sorry, System Restore does not cancel the major updates, that's why a lot of automatic updates delete all system restore points. The tool that is appropriate in this case would be a restore Image. If you have not created an image before the upgrade, then you are out of luck.

• XP pro have two problems: the system restore will not work and rdpclip seems to work computer

  I had a virus, trogan, stopzilla online to fix the problem after allowing access to my computer, (it's a virus) tried to uninstall this program, finally just disabled and removed from the start menu.

  Now, in the pc Registry mechanic tool the first thing listed is rdpclip as run from my computer.
  Since that time I have been unable to use system restore from windows system.   only restore I access is
  from backups of registry mechanic even if I went and set on system restore after that I checked the settings and discovered that they had been handed over to OFF.
  I used the restore before so I know it worked before the access help online.

  Is the solution just to disable repclip?   I have access to my computer so that I have to allow access by external connection...
  computer programs run more slowly, there is always time to wait before the update when I try to use wp-admin to make changes on my Web site.

  Former title changed, but explains the problem
  XP pro, has had a problem with virus removal program, it turned off because it wouldn't uninstall.  Now when I run Registry mechanic it shows my system being run by rdclip.  I can't use the windows system restore.  Points on the calendar are lit up but do not work.  Can I use mechanic registry to disable the rdclip? in auto start menu?  If so this might restore ability to use the system restore?

  Hello

   
  1. you receive an error message when running the system restore?
  2. which antivirus app do you use?
  3. what happened when you try to uninstall the program?

  4, are service packs installed on your computer?

   

  To uninstall the application:

  Method 1:

  Run the hotfix, restart the computer and try to uninstall

  Problems with programs that cannot be installed or uninstalled.

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

   

  Method 2:

  I suggest to keep the computer in a clean boot state and check the status of the issue.

  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353
  Note: After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.

  I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
  
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
  Important: While perform analysis on the hard drive if bad sectors are found on the hard drive when parsing tent repair this sector if all available on which data may be lost
   
  To solve the problem of system restore:
  I would sugggest you to go through the link following.
  Steps of troubleshooting for problems when you try to use the System Restore tool in Windows XP.

  http://support.Microsoft.com/kb/302796

   

• I need to restore my windows xp system, but when I run the system restore program, I get the message that no changes were made and to choose another restore point, but all have the same results. Why?

  the system restore program is activated.

  A restore point is selected. program is activated.

  It runs and after system restart, it is said that no changes have been made, run another restore point.

  Same results every time!

  Help!

  Hi larryburrage,

  1. did you of recent changes on the computer?

  2 when was the last time it was working fine?

  3 do you have Norton installed on the computer security software?

  If you use Norton Security software on the computer then refer to the article below and check if it helps.

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  If you don't use security software Norton then temporary deactivation of security software installed on the computer and check if it helps.

  Important: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

• I need to find the source file or registry that creates "Services" Exceptions in the firewall of Windows XP when the system is restarted.

  I have a boot sector virus (Troj/MBroot-H) that I can not remove from my computer without losing access to my HARD drive due to a custom boot partition.  I can't afford to repair or replace the computer I have at the moment, so I try to disable things as much as possible to neutralize this virus.  I have already downloaded Malwarebytes and analysis had revealed 18 registry viruses and files that have already been removed from the system.  The HelpAssistant account and its files have been deleted from the system.

  The only thing left to change is the firewall of Windows XP.  I currently have to restore Windows Firewall to its settings by default whenever I restart my computer because the virus has configured the system to add more 'services' and 'management' objects in the list of Exceptions whenever the system is restarted.  If I don't do that an outside source will invade the system via remote desktop and add the HelpAssistant account and the file.  I need to know how to replace system orders that creates these objects for additional exceptions during the restart.  I want to restore full contol on the firewall of Windows XP by allowing not exceptions except those I choose.  Is there a Window XP Firewall registry key or file that can be removed, replaced or changed to keep these elements to be added to the list of exceptions?

  Thank you

  Spacejunkie1

  The computer is still severely infected and you will not be able to "establish complete control over the firewall of Windows XP". Backup your data and do a clean install of Windows. I understand that you do not want to hear this, but it is, IMO, the answer. Please specify your first sentence if you need assistance.

  http://michaelstevenstech.com/cleanxpinstall.html - Clean install - how-to
  http://www.elephantboycomputers.com/page2.html#Reinstalling_Windows - what you will need at hand

  MS - MVP - Elephant Boy computers - don't panic!

• In Vista, doing the system restore, get error "unspecified error occurred when using System Restore.

  My system restore keeps coming back with the error, unspecified error occurred when using System Restore. Cannot change files. Also, after that I am unable to use my avast antivirus. All the sheilds on my Avast are lost. I; m not computer saavy so please help me

  Hello

  You can be infected with the Malware

  malware stops normally you use the system restore protect themselves remove you

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If not, try Safe Mode do a system restore

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• I have the same problem. When I do a system restore, I get an error message. The service of shadow copy of Volume used by the system restore does not work. Error 0 x 81000202

  My security service center cannot be started too.

  Hello

  Malware scan

  malware stops normally you use the system restore protect themselves remove you

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.
  7.  

  and try to do a restore mode safe

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.
  7.  

  and if using norton disable product anti-forgery protection

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

• Unexpected error in the property page. The VSS service uses the system restore does not work. Error (0 x 810000202). __

  original title: "there was an unexpected error in the property page. The VSS service uses the system restore does not work. For more information, see the journal of events (0 x 810000202). __

  "There was an unexpected error in the property page. The VSS service uses the system restore does not work. For more information see log of events (0 x 810000202).

  Please try the troubleshooting below to check the status of the shadow copy Volume service

  1. click on start > all programs > Accessories > run

  Type the following text in the run window, and then click ok:

  Services.msc

  You will get the Services window.

  2. Please check service Volume shadow copy service is "started" and "automatic".

  If these services are not set to "Started" and "Automatic", please, do a right-click on the service and select "Properties".
  On the window properties, please change the startup type to automatic, and use the Start button to start the service.

  Click on apply, click ok.

  Close the Services window

  Restart the computer and check if the problem occurs again.

  If the problem persists, start your computer in safe mode and try to do a restore of the system again. Temporarily disable your anti-virus protection

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  I hope this helps
  If this post can help solve your problem, please click the 'Mark as answer"If you find it useful, mark it as useful by clicking the 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.