Cannot start MS M30 due to damaged files

Similar Questions

• Cannot start because of missing or damaged file: \Windows\AppPatch\drvmain.sdb.

  Everything was fine when last stopped.  Then this error message.  Cannot get to anything that will open any program or allow me to run a CD.  Cannot start because of missing or damaged file: \Windows\AppPatch\drvmain.sdb.  Cannot run CHKDSK or use reinstall the CD because there is no place to run is.  Cannot get to Norton to uninstall.  Help!

  Hello

  If we can start safe mode?

  If so, we can perform Clean Boot Troubleshooting:

  http://support.Microsoft.com/kb/310353

  http://support.Microsoft.com/kb/316434

  If this isn't the case, then we might need a Windows XP CD in order to move forward.

  Let us know.

  Best regards

  Matthew_Ha

• "Word cannot complete the save due to a file permission error."

  I have Windows XP.  Recently, this message appeared when I tried to save my Word documents: "Word cannot complete the save due to a file permission error."  I can always eventally the record via a temporary file, but it's very messy.  "A file permission error" - what on Earth is this?  And what should I do to get things to normal?     Ron Davis, Newcastle N.S.W..

  When you press the F8 key and access the Safe Mode start screen, use the arrow keyboard keys to select "Safe Mode with networking" and press the Enter"" key.  A list of startup items you will see on the screen, but after all that, you will get a normal login screen (except the screen may seem bigger than normal and 'Safe Mode' can appear in the corners of the screen.  At this point, log in as any user with administrator privileges.  After successfully login, you should be able to right click on a folder or file and select "Properties".  When the Properties screen, you should have a 'Security' tab at the top.

  Another approach is to use the command line command "cacls" to a normal startup that will show and allow you to set permissions on files and folders.  (Start-> Run-> "cmd") and then you can use the cacls command.  The Calc command syntax can be found here:

  <>http://TechNet.Microsoft.com/en-us/library/bb490872.aspx >

  or you can type: cacls /?

  "Cacls" allows to screw things easily and quite bad so if you can switch to the tab 'Security', which is the way to go.

  HTH,

  JW

• "\?? \C:\Windows\Explorer.exe"cannot start or run due to incompatibility with the 64 bit version of windows

  A friend gave me your laptop to watch - there edition family vista (64 bit (I think) on it and when you try to run Explorer he says it does not find or access is denied and something about 16 bit / 64 bit (it has been a few days and I'm not memory clearly until what I try again tonight)

  "\?? \C:\Windows\Explorer.exe"cannot start or run due to incompatibility with the 64 bit version of windows"

  If you try to run a dll / Panel or anything like that, you will get an error message saying that it cannot run some 16-bit process or access denied.

  I did a lot of research on Google and nothing someone he said worked - which "everyone" giving full access to the C:\WINDOWS\Registration, executes a command secedit, a sfc/scannow, do a system restore to the point of older, make a new user account, start up in safe mode...

  So now I'm pretty stuck. I'm SURE I've seen this problem before with reference to 16-bit etc error messages, but in home edition I do not have the MMC users & groups (had to make new user with password renew then that starts in another environment) or the Security tab of the properties of file/folder for permissions NTFS etc (had to use icacls).

  Can someone enlighten us justice on that shiney? : o I don't want to have to redo the entire Setup, I'm sure it is something fixable...

  OK, so for those who want to know the real difficulty? --He came from a guy on the forums of TekTips

  goombawaho (MIS)

  5-13 dec 08:05

  Before charging, tell him from a prompt CMD (Administrator). Go in the the C:/windows/system32 folder and type "Rename verclsid.exe verclsid.old. reset

  I guess that I didn't that I had seen the name "verclsid.exe" in some of these error messages trying to run things.  I looked and saw it was to check the files or something.
  Anyway I couldn't rename even in admin console so I started in a different environment and renamed the copy in system32 and syswow64.
  Now, I've started and bang things seem to be ok! I guess I should try and replace it with a known working version? That or just give back it.
  I doubt that everybody does all c:\windows control total should be too dangerous, right... just?  : P I don't have a way to put permissions by default anyway, so Hey.  Formatting beats!

  Now why everyone here didn't it?  I knew it would be simple!  : p

• Railroad Tycoon 2 on Windows 7 error - setup.exe cannot start or run due to incompatibility with 64-bit Windows versions

  I'm playing the game "Railroad Tycoon 2-Gold edition" on my laptop which is running Windows 7. Whenever I try to install it, he repeats to me - "the program or feature? \G:\_setup\setup.exe cannot start or run due to incompatibility with 64-bit Windows versions"... .and there is nothing I can't do to go around that at all.  Normally with my old games I can at least install, then just then change to be compatible and is not, but I can not here. Any help would be great I want to play this game, it's one of my favorites and I hate how I can't play everything simply because computers are better than them... If this is the case, then they should still be able to support games that are 10 + years older than them, you know? I can add more information if needed, thank you.

  You must contact the manufacturer to see if they have a patch for Windows 7. He would come by the manufacturer and not by Microsoft.

  Thank you

  Marilyn

• error when trying to save to a flash drive "word cannot complete the save due to a file permission error.

  error when I try to record that a flash drive "word cannot complete the save due to a file permission error" (F\:filename)

  Hello

  We have recently launched a Microsoft Answers for Office forum:

  http://answers.Microsoft.com/en-us/Office/default.aspx

  Best wishes!

  Lisa
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Vista cannot start because of accidentally deleted system files

  Hello

  my laptop was working very well until some files were accidentally deleted and now Vista cannot start.
  There is a message saying that I need to contact the system administrator or the manufacturer of the pc.

  Is there anything you could recommend?
  I would appreciate if you could help me find a way to record all of the information contained in hard drives.

  see you soon

  If you are not able to boot up the laptop and refuse it to Vista to start then take recovery in hand, insert it and start on this CD from Toshiba.

  Then the cell phone should boot from the recovery CD and reinstall the whole OS again.
  This should help, but the HARD drive will be formatted.

• Cannot start a catalog from a backup file

  Hello

  Back up files from my iMac to an external hard drive, including all the photos and the Lightroom Catalog by using time machine.

  And now I'm on my way with my MCBook Air, it seems I can't launch the catalog (Lightroom Catalog.Ircat) from the backup file on the disk hard ext, he says that "the catalog cannot be used because the parent folder"xxx"does not allow files to be created in the breast of this".

  Wouldn't be because the original catalogue was in my iMac hard drive not in this backup ext hard drive? Does it really matter?

  However, I can open the Preview.Irdata file catalog Lightroom in Lightroom and import them into the current Lightroom Catalog, that I created in my Macbook Air. When I export the file, the file size appears smaller than usual.

  So my questions are:

  1 is there a way I can start the Catalog.Ircat with Lightroom file on the backup ext hard drive?

  2. If the answer is 'no' to the above question, will I create a new lightroom catalog in this backup (for my iMac) ext hard drive, and then import all the pictures once more?

  3. I found there is an option to "Import an another catalog" in Lightroom, it will work for my situation? He did not try as I worry I'll make a mess, and I guess if I can't start this catalogue in the disk hard ext, I am not able to import as well.

  3. the Preivew.Irdata file does not allow me to have the larger size of file to export is that correct?

  4. Finally, what is the suggestion to resolve all these long-term problem? Will I pass all (both from my iMac and Macbook Air) photos on a disk hard ext, and then export the current catalog to my Macbook Air on the same disk hard ext and import photos from my iMac in this catalogue (that is, a single catalog LR)?

  Thank you for sharing your experience and your suggestion so that I can better manage the LR catalog and smoothly in the future.

  See you soon,.

  Chuen

  Hi Chuen,

  It seems that the external hard drive does not write the changes on it and that's why the error that says "the catalog cannot be used because the parent folder"xxx"does not allow files to be created in the breast of this."

  The error is not related to your original catalog being located on the hard drive in the Imac.

  I suggest that you copy this file .lrcat and .lrdata from your local external hard drive to a location on your hard drive and try to launch it from there.

  If this does not work, then you can go for the option to create a new catalog and 'Import from another catalogue'

  Let us know if this is useful or if you need additional assistance.

  Kind regards

  Claes

• Cannot start web server on the executable file

  Hello

  We have a problem with a Web server - we cannot get to initialize the help of nodes of property or the ini on a compiled executable file.

  As part of our application, we are starting the Web server to publish a status page to be read remotely. This works very well when we are running in the development environment and also when we run an executable a PC with installed development environment, however it will not boot on a PC with just the runtime installed.

  I have attached some of the code that functionally does exactly the same thing in our main application. I used this as my Tester code and built in an exe while trying a lot of different things to fix.

  When executing:

  • The code will sit in the while loop until I press stop.
  • Web server: Active Server = FALSE
  • Out error = ERROR No.

  

  In the full application the while loop waits a few seconds before throw an error if the server is not started. In this example, I can let the loop running for awhile without leave. Normally, the boot time is<50ms when="">

  It's the ini file to the executable file:

  [WebTest]
  server.app.propertiesEnabled = True
  Server.OLE.Enabled = True
  server.tcp.serviceName = "My Server computer/VI"
  server.vi.propertiesEnabled = True
  WebServer.Enabled = True
  WebServer.TcpAccess = "' + * '"
  WebServer.ViAccess = "' + * '"
  DebugServerEnabled = False
  DebugServerWaitOnLaunch = False

  And it is the Web server configuration file:

  ErrorLog "$LVSERVER_ROOT/logs/error.log".
  LogLevel 3
  The default server name
  DocumentRoot "$LVSERVER_ROOT /... /.. '. "/ www".
  Listen 8000
  ThreadLimit 10
  TypesConfig "$LVSERVER_ROOT/mime.types»
  DirectoryIndex index.html
  LoadModulePath "$LVSERVER_ROOT/modules '" $LVSERVER_ROOT/LVModules "" $LVSERVER_ROOT /... ".
  LoadModule LVAuth lvauthmodule
  LoadModule LVSnapshot lvsnapshotmodule
  LoadModule LVRFP lvrfpmodule
  LoadModule dir libdirModule
  LoadModule copy libcopyModule

  AddHandler LVAuthHandler
  AddHandler LVSnapshotHandler .snap
  AddHandler LVRFPHandler

  AddHandler dirHandler
  AddHandler copyHandler

  "CustomLog"$LVSERVER_ROOT/logs/access.log"'%%u %t \"%r\ hour' % > s %b.
  KeepAlive on
  KeepAliveTimeout 60
  Timeout 60

  As can side note, anyone tell me where the $LVSERVER_ROOT variable is configured?

  I tried the things:

  • Copy a new default configuration file before the entry into force
  • Writing a predefined file (encoded) before initializing config
  • Definition to root before initializing directory (it actually generates an error because the server is not active...)
  • Set WebServer.Active = TRUE several times inside the while loop
  • Toggle the web server in the ini file

  System:

  • LabVIEW 2010
  • PC with Windows 7 running

  Thanks for any help, because it makes me crazy slow!

  Ben

  Hi Marco, thanks for the reply.

  I have this guide was reviewed previously and had done all that he but a small section who gave me a hint of something to try and I have solved my problem, so thank you!

  If anyone is interested, here's the problem:

  The directive DocumentRoot folder in the config must exist or the Web server cannot be started. So basically, make sure that the file points to a folder that exists!

  This leaves two small annoying problems if - you can't see if the file exists (and then create it) before starting the Web server, because you can not query the path to the folder without the Web server running.

  AND

  You can't really define the configuration programmatically file as parameters from the file are responsible for execution, not on the start Web server.

  The result of this is that the config file and the folder root document should be created (and corresponding of course...) when the executable is built / installed on the system. Not a massive headache, but it means do not forget to put things in the build specification and do not rely on software to do the job at startup

• Device Manager cannot start or run due to incompatibility

  whenever I click on Device Manager, a window opens with the following message

  When I click on ok, a new error window appears with the following message appears and closes when I click on ok

  

  can someone help me solve this problem?

  would be happy if you

  Original title: Device Manager does not

  Hi Vivek,

  Thanks for the reply.

  The kernel of the operating system files is damaged. Repair these files, to an installation disc.

  But first of all try us a few basic things and check if it helps.

   

  Method 1: Check the plug and play service

  It is a service responsible for Device Manager and other tools.

  1. Press windows + R
  2. Type services.msc, and then click ok
  3. This will open a window with all the services

  Scroll down and check the plug-and-play service and it is started and set to automatic.

  Method 2: System Restore

  This will restore the computer to an earlier date when it was working fine.

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  System Restore warning: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  If none of the steps can help. We need a disk installation or on a windows 7.

  Method 3: System Update Tool Rediness

  This tool automatically checks for errors and also allow you to get the latest updates.

  https://support.Microsoft.com/kb/947821?WA=wsignin1.0

  Please select the correct edition and windows and download the right file that is suitable for your operating system.

  Hope this information helps. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• Cannot open .pdfs - not supported or damaged - file type encoding

  HI, we have questions at an increasing rate where users receive the following error message when you try to open a .pdf attachment:

  

  This seems to occur during the transmission of a document to the iPhone/iPad and any attempt to open in Outlook.  We use Outlook/Exchange 2010 and most users have Adobe Acrobat DC.  There is no problem if a user send from their PC.  We see this with about 10% of all attackers.  Did anyone else encounter this problem and is the encoding of the root cause?  Version below:

  

  Thanks for any help!

  See you soon,.

  Shawn

  Hi shawnm36947589,

  Please visit these links: PDF/s is not a supported file type or because the file has been damaged, he was sent as an attachment to e-mail and has not been correctly decoded, how can I solve this?

  Adobe Reader could not open a PDF - either not supported for the type of file or corrupted file

  Thank you!

  Shivam

• «Photoshop Elements [12] cannot start or continue because of missing files.» Please reinstall. »

  I uninstalled and then reinstalled the program (which was obtained initially by download, no CD), but it did not help. Always the same error message.

  Contact support online, they tried to do the same thing (under their control of the PC) but the same thing happened. Rather than stay with me after this, they have simply disconnected.

  What can I try next?

  Windows 8 PC.

  Well... I took out an external drive where I kept a backup copy of Photoshop 12 Installer and used instead. It worked.

  So... somehow the executable of Photoshop on my PC's hard drive has been corrupted, and the installation in my download folder files were too damaged.

  But everything is ok now. Thank you @kglad.com for trying to help.

• Cannot start Far Cry 4; error "the file version is not compatible with the version of Windows...". »

  * Original title: little problem!

  everytime I open far cry 4 or the instalastion of a graphics driver it shows like this... What can I do to solve this problem!

  If you don't do this there will be no more questions about what you have:

  Click on the button/ORB start in the lower left corner of your screen. Or, press the button of your keyboard Windows logo.

  In the type box:

  Msinfo32

  Select / click msinfo32.exe and the system information dialog box opens.

  Click System summary, click on edit, select all (Ctrl-A), copy (Ctrl-C) and then paste (Ctrl-V) the information back here in your next reply.

  For information about video drivers, expand components, click view, click on edit, select all (Ctrl-A), copy (Ctrl-C) and paste (Ctrl-V) feedback here.

  There will be some personal information (such as the user name and the name of the system), and anything that turns information private for you, simply delete the pasted information.

• Windows cannot start due to a missing or damaged file

  Original title: using a NETBOOK, WINDOWS can NOT START due to a MISSING OR DAMAGED FILE

  error message. Windows\System32\Config\System

  Let me guess that your netbook from brand not specified and the model has no CD/DVD drive and you have no real media installation of XP and before the incident and during the execution of XP, your system suffered a power failure, power failure, aborted restart or an abnormal termination?

  This is not an insurmountable problem in the world today... it happens all the time in these forums.

• Error message at startup: "cssauth.exe instance cannot start due to an initialization error" and also unable to open help and the file

  Original title: cssauth.exe instance cannot start, help and Support of file disable

  Whenever I connect to my windows XP, it still says cssauth.exe instance cannot start due to an initialization error and I could not open my file help and suppot. Please help me. Thank you before

  Hello

  1 how long have you been faced with this problem?
  2. don't you make changes on the computer before this problem?
  3. What is the brand and model of the computer?
  4. who help and support files are you referring to?
  5. what exactly happens when you try to open it? You get the error message?

  cssauth.exe is related to the Client Security Solution.

  Step 1: Try disabling startup cssauth.exe in the configuration of the system.

  Here's how:

  1. click on start > run.
  2. type msconfig and press ENTER.
  3. click on the Startup tab.
  4 locate cssauth.exe, and clear the check box for this.
  5 restart the computer and check for the issue.

  Step 2: If you still get the same error at startup then perform the clean boot on the computer.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. click on start and then click Run.
  2. type msconfig and click OK.

  The System Configuration Utility dialog box appears.

  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
  4. When prompted, click on restart to restart the computer.

  I would also ask you to contact the manufacturer of the computer because the problem is with the client security software that is provided by them.