damaged library file

Similar Questions

• My library files are damaged, or cannot be opened. PLEASE HELP URGENTLY! AS SOON AS POSSIBLE

  So first I received on my laptop, to notice that when I was on the tab start, my documents, music, photos, library folders were not working. When I went to the library, My Documents appeared as Documents.library - ms and the same with others. When I try to hit the properties on them, he said that the properties of this file cannot be opened. I need this problem as urgent. I already know the way of the real My Documents on the C drive, but I just need this problem. I'm not to have damaged files when I go to work. I made various methods, such as the libraries of the restoration, which did not work at all, it comes to replace the same files to library-ms. It has an icon of the White Page. Please, please help!

  Thank you!!!

  Open and run this registry file to repair the library file type association:

  http://www.SevenForums.com/attachments/tutorials/168982d1312706659-default-file-type-associations-restore-default_library-Ms.reg

• Why is - my iMovie library file so HUGE?

  Hello! I'll start making videos of youtube, and I am their editing in iMovie. However, the library files are so great! Difficult to deal with the space. I'm editing a video 23 GB and now the library file to a video is close to 400 GB. How can it be that is great? I have some files of different libraries, I am still getting used to the use of imovie and straighten them all into one soon, when I get a bigger hard drive. How and why is a library of files almost 400 GB right? There are definitley only a project in this imovie library. hen I select "display the contents of the package", it is only 1 file for the project I'm working on that. No indication on what would be a massive help here. Thank you very much!!

  What is your project? What are the specifications of your imported 23GB clip? Looks like it's maybe 1080 p or 4 k video.   This encoder is used? iMovie sets project properties based on the first clip placed on the timeline, so if your video is a long GOP Encoder then editing in iMovie will be large as well. Some users use a separate library for each project so no need to combine projects into a library.

• Move the library file to new mac, as well as metadata

  If I had to move my library of Photos to another mac, all the metadata (faces, keywords, etc.) will come with it? Not in terms of the timing, but the library of faces real itself, etc. Is it as simple as move the photo library file to the new location or is there an official way to do this?

  Thanks as always!

  Just drag it to the new computer or transfer using a hard drive in Mac OS extended (journaled) format

  LN

• An easy way to re-import massive media after a hard disk crash if the library files are intact?

  Hello

  I'm running 10.2.3 on OS X 10.11.3 FCPX. My external hard drive just crashed, and while I was able to save most everything else (including library files, proxy support, etc.), Miss me about 90% of the media about 2 000 "original" files. Because the library files have been saved, it seems that my projects seem to be intact, including the cuts and changes. Since FCPX knows what files and parts of files were previously imported, import should be easy... except for the fact that there are about 1 800 distributed clips on dozens of camera archives.

  Is there a way to 'massive re-import' office where he knows the clips came, without having to wade through thousands of clips in dozens of archives and manually by clicking on each of them? Because there is also the fact that, due to several archives of the camera used, different are multiple "Clip #1", "Clip #2", etc. that FCP is solved by adding a number at the end (for example, "Clip #1 (fcp1)" and "Clip #1 (fcp2)"). " I'm afraid that if I import everything in disorder (maybe I not initially import a clip, but returned later and get it), I'll have to sift through to find a needle in a haystack and rename the files manually.

  Even if I have to specify the locations of these archives of tens of couple, it would be so much easier than having to go into each of them and click 1 800 files manually... Any suggestions?

  Please and thank you!

  Too bad. I had assumed the import > reimportation of the camera wasn't working, but apparently because I had saved the AVCHD archives on my hard drive via the Finder instead of 'Create the Archives' of in Final Cut, he just didn't see them. Creating new archives of these same AVCHD files (or rather the folders 'PRIVATE' which originally housed them on the SD card) did the trick and I was able to reimport. Alternatively, I could have re-recorded these SD cards PRIVATE folders and it would have identified those as the original 'camera' once again, too and I could have reimported it... but who would be tedious.

• deleted for the Photos of El Capitan library file

  I was bugged by the library file that was done in my pictures folder so I deleted it and now when I want to open the Photos app, I get this: pictures cannot find system named «Library.photoslibrary Photos» Photo library I would like to disable the app entirely but can not because I do not more open.

  Any thoughts?

  Thank you!

  Eva

  Welcome to Apple Support communities

  What do you mean by 'disable the app? If you do not want to use the Photos app more, do not open it. You have removed from its library, so it won't do anything.

  If you want to continue using Photos, open it while pressing the Alt key then it will let you choose the library you want to use with it or create a new. You can also recover your old library from a Time Machine backup, if you have a.

• Creation of stand-alone executable file with similar library files without errors of link

  I have an Executive Test that is run on two different test systems. Each stand has another card ARINC429. The old card use 429dll32.lib, while the most recent map use pci429.lib. Test Exec code only loads a single library file (using LoadExternalModule) depending on what the test bench has the card, but since there are many similar functions in both, ICB does not test Exec be built as a stand-alone executable.

  In CVI 5.0.1 I opens the "Create stand-alone executable file" and select "add files to the executable. I check the 429dll32.lib and the pci429.lib to include in the creation of executable, and then click 'OK '. When I click 'OK' to create the executable I have several link errors, one for each function both .lib files have in common.

  Is it possible for each of these .lib files to be included in the compilation without having to create two separate executables?

  eatmontr:

  If you use LoadExternalModule(), you need not include the .lib files in the Executive test project.  Refer to the CVI for LoadExternalModule help.

  Here's the info on the help:

  LoadExternalModule loads an external object module file. You need not list the file in your project or loaded as a module of an instrument.

  The file may be an object (.obj) file, a library file (.lib) or a library (.lib) import DLL.

  Here are a few articles to OR who can help.

  To access the plug-ins with CVI (with sample program) http://zone.ni.com/devzone/cda/epd/p/id/133

  How do I call dll if I have two functions with the same named in two different dll? http://digital.NI.com/public.nsf/allkb/5299ED8D43F3B5FE852563BF0056EBA6

• Library file does not

  My library file does not work. When I try to open the Photo, video, Documents, or music libraries I get a box that opens by saying it no longer works and can be removed and the folders that have been included will not be altered. I can't get my photos to put on a disc, so I do not lose their. I can not update my computer until I have them down without losing their. HELP ME PLEASE!

  Hello

  See the guide on the following link.

  http://www.eightforums.com/tutorials/26856-library-Ms-no-longer-working-fix-Windows-7-8-a.html

  Kind regards

  DP - K

• I accidentally changed a *.vi labview library file. How can I fix my system?

  Dear Sir:

  I work with Labview version 8.5. works on Windows Vista o/s.

  I accidentally changed a *.vi Labview library file and now some programs which in the past has executed correctly, no more to run correctly.

  I have modified the library is named lvsound.llb and the file I changed, "SO Write.vi".

  I made two changes, however, the first amendment has been removed.

  That's what happened.   I modified the file SO Write.vi by chance, somehow, a link has been broken.

  I thought I could repair the file copy of a file to write identical SO that I had stored on another computer.     What I've done I copied the work SO Write.vi content block diagram (which was stored on a disk that is external and not stored in the 'sound' of Labview installation folder) and then I opened the SO Write.vi in the lvsound.llb (this is the *.llb of Labview installed) and deleted everything in the block and then diagram I replaced the block diagram with the copied block diagram.   I thought that that would solve my problems because the copied program did not have a cut connection - no broken arrow icon).     However, I soon discovered that programs that completed successfully before the accident, still not function properly after swapping content block diagram.

  I have attached a picture of the error message.

  Can someone tell me please the safest way to fix my system?

  Don't exchange the content of block diagram, or if you do so, as it was put in place the same connector pane. When you have removed all the controls and indicators, the connector pane has been authorized which explains why things that call this Subvi will not see that it has no control. To fix it, you need match this component of the connector:

  To set up, click an empty area of the connector pane, and then click the command corresponding or indicator. For example, down to the left of your new connector pane, click on the bottom left box, and then click 'error (no errors)' control for screws outside pass an error via the connector pane. To see where everything is connected, I would recommend that you go to a computer with a working version and one by one, click on the terminal part of the connector and the corresponding command will highlight:

  

  for example, clicking on the top left corner will highlight control "ID of the task in.

  Another option you have is to simply copy the .vi itself (file, block diagram not only) of library work, delete or rename the current "SO Write.vi" and simply drag the file .vi from the Explorer on the LLB Manager.

• damaged CD - can I copy damaged Internet files?

  I have a windows xp home sp1 upgrade cd and it has damaged some files... is possible to copy the files (which are damaged) from the internet without having to order a new cd?

  Yes.   You can download service packs from Microsoft.  The following Microsoft KB article has links to download SP1a, SP2, and SP3 from Microsoft.  Note that you do not need to install Service Pack 1a.  Installing Service Pack 2 will actually install SP1a and SP2.  Also note that the SP1a or SP2 must be installed before installing SP3.

  "How to obtain the latest Windows XP service pack"
    <>http://support.Microsoft.com/kb/322389 >

  HTH,
  JW

• Defrag damage a file or its folder that had been open and saving the changes?

  BACKGROUND

  ("Work") file, including the file ("History.xls") I opened its doors and mounting and don't save while Disk Defragmenter is running in the background 'disappeared' AFTER that I closed on History.xls and then Defragmenter.

  COMMENTS:

  After the cancellation of defragmentation:

  • All other folders seem to be present. However, it took between 15-30 seconds for them to open the 'first' time.
  • Defrag never stopped, didn't report it was over, or what "improvements", he did. I had to "Cancel".
  • Files was between 15 and 30 seconds to open "Preview".
  • The 'Work' folder was still present in the directory tree display. When I clicked it, however, he was nowhere to be found. Could not display it in the command line or from the administrator command prompt. Just a folder with some of my most valuable files - gone!
  • Defrag has run longer than 24 hours because: 1) the instructions says it could take several hours and 2) he has spent most of the time 'analysis' 3) all other options are grayed out and 4) 'You can still use your computer while the defragmentation process'... Finally, I had enough.
  • To the best of my knowledge, I did not remove the file still less his file.
  • The file or the folder are in the trash.
  • The computer had worked perfectly until I ran Defrag (now its response slow BUT WORSE I get back is no longer a very valuable file).

  Disk capacity HARD and utilization (GB):

  • C:\ = 95.07/239.2 = 39.74%
  • = 12.32/40.02 = 30.78% F:\
  • (two NTFS file systems)

  HARDWARE/OS

  • Dell Inspiron 530 (3 years)
  • MICROPROCESSOR *: Intel processor Core 2 Duo E8300 (2.83 GHz, 1333 MHz FSB) and 6 MB of cache
  • RAM: Memory: 3 GB DDR2 - SDRAM (PC2-6400/800 MHz)
  • BIOS version: 1.0.15
  • OPERATING SYSTEM: Microsoft Windows Vista Home Basic Version 6.0 (build 6002; Service Pack 2)

  Thank you.

  Hello

  Defrag will not damage any file or folder.

  Fragmentation makes your hard drive to do extra work that can slow down your computer. Disk Defragmenter rearranges fragmented data so can work more effectively your hard drive.

  On the disk defragmentation:

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-disk-defragmentation

• using windows media player, save voice of a Sony ICD-UX71RED to the library files?

  using windows media player, save voice of a Sony ICD-UX71RED to the library files?

  Hi NikClark,

  ·         You try to synchronize the device with windows media player?

  ·         What happens when you try to synchronize?

  ·         You get the error message?

  Follow the steps in the article.

  Set up a device to sync in Windows Media Player

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-device-to-sync-in-Windows-Media-Player

  For reference:

  Windows Media Player sync: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Media-Player-sync-frequently-asked-questions

  Resolving sync conflicts: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/resolving-sync-conflicts-frequently-asked-questions

• On a 32-bit vista business system, what is the right way to recover from a damaged NTLDR file that prevents the system from booting?

  On a 32-bit vista business system, what is the right way to recover from a damaged NTLDR file that prevents the system from booting?

  Also, is there a powerful device filled, utility like Winternals Windows PE boot, I can download for the resolution of problems like this and others?

  Thank you in advance!

  Have you had a glance at this startup repair disk?

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Error: "the file is maybe damaged. the file header does not match the checksum calculated"during the installation of Windows 7/8

  * Original title: Question of re-Installation of operating system.

  I got the message during win 7 / Win 8 installation.

  "the file is maybe damaged. the file header does not match the checksum calculated.

  My config - processor Intel C2D, 2 GB of RAM, Intel motherboard, 500 GB HARD drive

  I have also replace Win 7 DVD and DVD player also replaced.

  I also reinstall my single RAM chip so many times. but the problem still exists.

  During Win XP SP 3 installation, no such message type not displayed. I can install it easily.

  Pls help me Sir, I would like to Win7 in my computer again.

  Hello

  Thanks for posting your query on the Microsoft Community.

  According to the description of the problem, it seems that you are facing the question with the reinstallation of Windows 7 on your computer.

  Because the computer does not recognize the CD - R into the DVD player probably boot order is set to hard drive first. I suggest to change the DVD boot priority in the BIOS and then try to perform the Startup Repair.

  Note: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  In order to make changes in the BIOS, I suggest you to contact the manufacturer of the computer.

  Method 1:

  Unplug all external devices connected to the computer with the exception of the keyboard and mouse and check if the problem persists.

  M odes 2:

  If the problem persists try the Startup Repair. It is one of the recovery tools in the System Recovery Options menu. This set of tools is on your computer's hard disk and on the Windows installation disc. To learn more about Startup Repair , you can refer to the below mentioned article:

  http://Windows.Microsoft.com/en-us/Windows7/Startup-Repair-frequently-asked-questions

  Method 3:

  In addition, if startup repair is not enough, you can perform a system restore, check if it helps you to solve the problem. For reference, you can see the article mentioned below.

  What are the system recovery options in Windows 7?

  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  Note: when you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Kind regards

• Some of my library files are hidden in Windows 7

  Some of my library files are hidden for a reason, such as music, documents and pictures.  My download folder is not.  I know they are there; I went to Union - folder and search - options display the files and folders and they appear, but Misty as they are hidden.  So I checked the files they point, they were awarded 'hidden', so I not hid them, still foggy folders shortcuts and hidden.  I can't select an attribute for the shortcut when I right click on say that the images in the left pane.

  What's wrong?  Can anyone tell me please where to change it, so I can fix it.

  James

  Hello

  You did it changes on the computer before the problem started?

  By default, the folders in the library (images, music, documents and videos) are displayed and you cannot hide.

  Follow these steps and check if it solves the problem:

  Step 1: Resetting folder view settings.
  a. click on tools in the menu bar of Windows Explorer window and choose Folder Options.
  b. in the Folder Options window, select the view tab and click on the button Reset records.
  c. you will be asked to confirm if we reset all folders of this type to the default view configuration, click Yes.

  Step 2: download and run the tool fixit from the link below:
  Diagnose and repair Windows files and folders problems automatically

  Step 3: perform a system restore to restore the computer to an earlier point in time before the problem started.

  Check out these links for help:
  http://Windows.Microsoft.com/en-us/Windows7/restore-system-files-and-settings  
  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

  Kind regards
  Afzal Taher - Microsoft technical support.
  Visit our Microsoft answers Feedback Forum and tell us what you think.