damaged Setup file

Similar Questions

• Smartphones blackBerry Curve 8900 Device Software for Rogers - DAMAGED Setup FILE

  Hi all

  I was wondering if someone else ran into this problem (if there is no BlackBerry Rogers on this forum). I tried to download and run the software for the device for Rogers out of the BlackBerry and the installation site, I came across the following error message:

  "Error 1335. The file 'Data1.cab' required for this installation is damaged and cannot be used. This may indicate a netowkr error, an error reading from the CD-ROM, or a problem with this package. »

  When I try clicking on ignore, I get this message:

  "Error 2350. FDI Server error. "

  I wish that I was good enough to know what that means, but I'm completely lost here. I tried to install this on two machines (XP Home SP2) and Vista, both give me the same problem.

  I feel there may be a problem with the software on the site. Could someone else confirm this or get an idea of what to do?

  Thank you

  -Antonio-

  you are absolutely right

  It's something like a lottery. Guess a lucky time for downloading a file

• An IO error occurred during the installation of a file. This is normally caused by bad installation media or a damaged Setup file.

  Hi all

  I have a sony vaio notebook - and I installed windows 8 pro 64 bit in there. I get this error when installing my drivers I downloaded from sony's official website. Can someone help me please...

  Satya,

  Thanks for the reply. I suggest to check if you have waiting for update of Windows, including optional updates, if so, install.

• On a 32-bit vista business system, what is the right way to recover from a damaged NTLDR file that prevents the system from booting?

  On a 32-bit vista business system, what is the right way to recover from a damaged NTLDR file that prevents the system from booting?

  Also, is there a powerful device filled, utility like Winternals Windows PE boot, I can download for the resolution of problems like this and others?

  Thank you in advance!

  Have you had a glance at this startup repair disk?

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Updating FF 24/25, my browser hang, I uninstall the browser and tried to reinstall, but extract the Setup file and blocks until pls give a solution

  Updating FF 24/25, my browser hang, I uninstall the browser and tried to reinstall, but extract the Setup file and blocks until pls give a solution

  I solved the problem, installed the installer from mode Windows safe.

• Dynadock V10 - "error cannot find Setup file" INSTALLER ERROR

  Hi I have a toshiba dynadock V10.

  Whenever I try to install the drivers, that it says "error cannot find Setup file. I have downloaded the latest drivers and off my anti virus and cut all the proiceses running and no go. There are a few references to this on the internet, but none has a solution.

  I amn trying to install it on an equium U400 running windows 7.

  Curiously, it loaded on an old dell pc easily!

  I spent hours looking on the net and there is no answer. I have nothing showing in the programs to uninstall.

  Thank you

  > Oddly enough it loaded on an old pc easily!
  Hello

  This means that drivers are ok and that there must be something wrong with the system pre-installed on Equium U400.
  How to proceed?

  It is important that you don't would NOT connect the Dynadock to the laptop before installing the software and drivers was not finished.
  Therefore, you need to install the software first. Then after new reboot connect the Dynadock to portable and installation would end the next steps.

• damaged CD - can I copy damaged Internet files?

  I have a windows xp home sp1 upgrade cd and it has damaged some files... is possible to copy the files (which are damaged) from the internet without having to order a new cd?

  Yes.   You can download service packs from Microsoft.  The following Microsoft KB article has links to download SP1a, SP2, and SP3 from Microsoft.  Note that you do not need to install Service Pack 1a.  Installing Service Pack 2 will actually install SP1a and SP2.  Also note that the SP1a or SP2 must be installed before installing SP3.

  "How to obtain the latest Windows XP service pack"
    <>http://support.Microsoft.com/kb/322389 >

  HTH,
  JW

• Defrag damage a file or its folder that had been open and saving the changes?

  BACKGROUND

  ("Work") file, including the file ("History.xls") I opened its doors and mounting and don't save while Disk Defragmenter is running in the background 'disappeared' AFTER that I closed on History.xls and then Defragmenter.

  COMMENTS:

  After the cancellation of defragmentation:

  • All other folders seem to be present. However, it took between 15-30 seconds for them to open the 'first' time.
  • Defrag never stopped, didn't report it was over, or what "improvements", he did. I had to "Cancel".
  • Files was between 15 and 30 seconds to open "Preview".
  • The 'Work' folder was still present in the directory tree display. When I clicked it, however, he was nowhere to be found. Could not display it in the command line or from the administrator command prompt. Just a folder with some of my most valuable files - gone!
  • Defrag has run longer than 24 hours because: 1) the instructions says it could take several hours and 2) he has spent most of the time 'analysis' 3) all other options are grayed out and 4) 'You can still use your computer while the defragmentation process'... Finally, I had enough.
  • To the best of my knowledge, I did not remove the file still less his file.
  • The file or the folder are in the trash.
  • The computer had worked perfectly until I ran Defrag (now its response slow BUT WORSE I get back is no longer a very valuable file).

  Disk capacity HARD and utilization (GB):

  • C:\ = 95.07/239.2 = 39.74%
  • = 12.32/40.02 = 30.78% F:\
  • (two NTFS file systems)

  HARDWARE/OS

  • Dell Inspiron 530 (3 years)
  • MICROPROCESSOR *: Intel processor Core 2 Duo E8300 (2.83 GHz, 1333 MHz FSB) and 6 MB of cache
  • RAM: Memory: 3 GB DDR2 - SDRAM (PC2-6400/800 MHz)
  • BIOS version: 1.0.15
  • OPERATING SYSTEM: Microsoft Windows Vista Home Basic Version 6.0 (build 6002; Service Pack 2)

  Thank you.

  Hello

  Defrag will not damage any file or folder.

  Fragmentation makes your hard drive to do extra work that can slow down your computer. Disk Defragmenter rearranges fragmented data so can work more effectively your hard drive.

  On the disk defragmentation:

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-disk-defragmentation

• Error: "the file is maybe damaged. the file header does not match the checksum calculated"during the installation of Windows 7/8

  * Original title: Question of re-Installation of operating system.

  I got the message during win 7 / Win 8 installation.

  "the file is maybe damaged. the file header does not match the checksum calculated.

  My config - processor Intel C2D, 2 GB of RAM, Intel motherboard, 500 GB HARD drive

  I have also replace Win 7 DVD and DVD player also replaced.

  I also reinstall my single RAM chip so many times. but the problem still exists.

  During Win XP SP 3 installation, no such message type not displayed. I can install it easily.

  Pls help me Sir, I would like to Win7 in my computer again.

  Hello

  Thanks for posting your query on the Microsoft Community.

  According to the description of the problem, it seems that you are facing the question with the reinstallation of Windows 7 on your computer.

  Because the computer does not recognize the CD - R into the DVD player probably boot order is set to hard drive first. I suggest to change the DVD boot priority in the BIOS and then try to perform the Startup Repair.

  Note: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  In order to make changes in the BIOS, I suggest you to contact the manufacturer of the computer.

  Method 1:

  Unplug all external devices connected to the computer with the exception of the keyboard and mouse and check if the problem persists.

  M odes 2:

  If the problem persists try the Startup Repair. It is one of the recovery tools in the System Recovery Options menu. This set of tools is on your computer's hard disk and on the Windows installation disc. To learn more about Startup Repair , you can refer to the below mentioned article:

  http://Windows.Microsoft.com/en-us/Windows7/Startup-Repair-frequently-asked-questions

  Method 3:

  In addition, if startup repair is not enough, you can perform a system restore, check if it helps you to solve the problem. For reference, you can see the article mentioned below.

  What are the system recovery options in Windows 7?

  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  Note: when you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Kind regards

• I get this message on my desktop - the Setup files are corrupted. You can get a new copy of the program.

  "The Setup files are corrupted. You can buy a new copy of the program"Hi, I get this message on my desk. I am running w/7-Ultamate with 8 GB of ram and a 650 GB hd. Any idea on how to fix this? I wake up in the morning and there are at least a dozen of the error messages.
  Thanks Jim

  Original title: the Setup files are corrupted

  Hello

   
   
  1. What is the full/exact error message?
  2. When you receive this error message?
   
   
  Follow the steps.
   
   
  Method 1
  Start the computer in safe mode and check if the problem persists, if the question does not persist then perform the clean boot and check if the problem resolves.
   
   
  Step 1
  Safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed. Please click the below mentioned link.
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode
   
   
  Step 2
  Put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.
  http://support.Microsoft.com/kb/929135
  Note: After you have performed the steps in the clean boot troubleshooting, follow step 7 the link to start the computer to a Normal startup mode.
   
   
  Perform the virus scan and make sure that your computer is virus-free.
  
   
  Method 2:
  Run Microsoft Online Scanner.
  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
  Important: When performing analysis on the hard drive if bad sectors are found on the hard drive when parsing tent repair this sector if all available on which data can be lost.
   
  Also, make sure that you have the latest update of the software antivirus installed on your computer, so that it works correctly.
   
  Also run a scan complete with Microsoft Security Essentials, check out the link.
  http://Windows.Microsoft.com/en-us/Windows/products/security-essentials
   

  For further assistance, post back with display of the event logs. Check out the link.

  What are the information contained in the logs of the event (Event Viewer)?

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  Response with more information to help you.

• Packer of creative cloud in creating a package that I can install do not.  He goes through the motions, download all updates, create setup file, but it does not work despite the fact that there are no errors in the log files

  Packer of creative cloud in creating a package that I can install do not.  He goes through the motions, download all updates, create setup file, but it does not work despite the fact that there are no errors in the log files

  After hitting my head against the desk to repeatedly create packages, try on different computers I have finally found a solution.

  These packages have been copied on an external drive, if I try and install from the external drive, which is a common practice, it fails.

  If I then copy this file pkg from the outside, to the computer I install, then run it, it will to and moved very well.

  That is mind-boggling stupid, because it's rare that you have to copy the file into any computer, it is less always installed off the coast of externally, and many people in the company are pushing on the network and the management of the suites so there is a serious problem in Adobe package manager if this is the case where it cannot manage the Middle installed offshore.

  I hope that if anyone else is having problems so it suits.

• Lack of adobe acrobat 9.2 Setup file

  Hello

  I am looking for a setup file of adobe acrobat 9.2, I have the license key, but not the installation file

  Thank you

  Fadi

  [email protected]

  Hi fa50721074,

  Please download Acrobat 9 using this link products download Acrobat | 9: 8 .

  After installation, open Acrobat go to the Help menu and check for updates.

  Kind regards
  Nicos

• Muse damaged corrupted file - can it be saved?

  I have a muse damaged, corrupted file and I was wondering if it can be saved? It was fine yesterday, but since my computer was restarted and upgrade to Yosemite, he says that it is damaged.

  Does anyone have any suggestions?

  Sending, please use the .muse file and the file MuseLog.txt of Documents of all the computers that were used to edit the file with a link to this topic for the context. If the file is larger than 20 MB, you can use a service like Adobe SendNow, Dropbox, WeTransfer, etc. (if you use a service, please include your return e-mail address in the body of the message, as no service all enrolling them in the sharing invitation they send.) Thank you.

• Cannot download the latest version of the DPS Apps Builder - Setup file English sound

  Hello

  I'm trying without success since yesterday to download the latest version of the DPS

  Application generator from your site or via the online support and each time

  I try to open it it gets me the message:

  Sorry, an error has occurred.

  The application could not be installed because the file installation EST

  sound. Of to try to get a new setup file

  the Publisher of the application.

  I tried 20 times.

  Under I am Max OS X (version 10.6.8)

  I CRACK!

  Help me

  -Sophie JOSSE

  DPS App Builder supports more Mac OS X 10.6.8.

• Satellite L650 - where are located the Office Setup files

  Hey there

  I have a problem with office 2007 on my L650 and need to locate the files of configuration/cabins to rerun the Setup program.

  Anyone have any ideas where the files are?

  See you soon

  BTW the prob with Office is when I click on a file to open in office (ie: work.docx) spits out an error saying action valid only for installed products!
  Yet, the icon is there and everything is installed, this happened 2 days without apparent reason.

  I tried to go directly in MS Office file and initialize the word of the "EXE" and it gave me a memory error output.
  Tried to uninstall in Control Panel and still another error came.

  in any case if someone can help please.

  AFAIK the office is preinstalled on your laptop and you can't restart the installation again it of just a trial version and if you want to have a full version, you need to make a purchase.

  In your case, I see only one solution: the device must be reset to the factory settings for Office works again.