Damon Lite - kernel debugger must be disabled Windows 2000 with SPTD 1.60 or higher

Similar Questions

• Internet Explorer is the best for my Windows 2000 with the Office?

  I think I have IE6 and want to upgrade to 7 or 8, but do not know if my Windows 2000 SP4 operating system is compatible... advice?

  Hello

  Your choice is easy as 2000 is not compatible IE7 or 8. I'm sorry.

  IE7
  http://www.Microsoft.com/Windows/Internet-Explorer/IE7/

  IE8
  http://www.Microsoft.com/Windows/Internet-Explorer/default.aspx

  You can add the Windows Live toolbar to get to navigation tabs
  http://smallworkarounds.blogspot.com/2008/12/tabbed-browsing-in-IE6-how-to-get-tabs.html

  Look at Maxthon that runs on the IE engine
  http://www.Maxthon.com/

  Rob - bicycle - Mark Twain said it is good.

• What printer driver for Windows 2000 with work with a 8600? Just for printing.

  I need a printer driver for Windows 2000 that are compatible with a plus of 8600. Just for printing and not other features. In the past, I used a driver for a 550 c to print to a 8500 has more but it does not work well with the 8600.

  Thanks, 6940 driver seems to work.

• The following problems prevent upgrade Windows. Cancel the upgrade, perform each task and then restart the upgrade to continue. To upgrade to Windows 7, the computer must be running Windows Vista with Service Pack 1 (SP1) or later.

  I get this message when you try to upgrade to 7!  My computer is 100% in windows update update - please help!

  Hello

  What happens when you try to install SP1/SP2.

  Read through the material in the article...

  http://Windows.Microsoft.com/en-us/Windows-Vista/learn-how-to-install-Windows-Vista-Service-Pack-1-SP1

  Notify us of any errors when you try to install the service pack.

  To know if SP1 is already installed

  • Click the button start , right click on computer and then click Properties.

    Check if Service Pack 1 is listed in the Windows edition section.

    Cheeeers...

    Erwin

• Problem upgrading Windows 2000 with my Sat 3000-400

  Hello guys,.

  at home, I have a Sat 3000-400 with Win ME for my own. Now I want to Win 2000 and a friend told me I should be careful in what order I should install the new drivers.

  I'm a normal user so I don't know where I could find this information. Could someone help me?

  Hi campino,.

  If you want upgrade ME to 2000, you must be careful about the order of installation of driver.

  I found a very good faq on the site of toshiba UK. It is a command the entire facility for many machines.

  for sat 3000-400, it is:

  1 chipset Driver
  2. video driver
  3 Intel SpeedStep Applet
  4 driver Modem internal
  5 LAN Driver
  6 infrared driver
  7 QFE
  8. smart Media utility
  9 easy Button Software

  Here is the link

  http://UK.computers.Toshiba-Europe.com/ and go to Support & downloads, then go to the knowledge base.

  Faq No. 00000007d2DGA.

  I'll hope this helps!

  BOB77 Bye

• I have an old machine with Windows 2000 with SP 3. How can I get updated so I can get the data on the latest machines?

  There also IE5 which I can't seem to update or another. Ideas?

  Updated to what? You can copy the data to an external drive and then copy it on your new machine. You will need to reinstall all the programs of original media.

• Acceleration 3D on Windows 2000 does not

  I'm currently under evaluation of Workstation version 11, version 11.1.2

  I'm running a virtual Windows 2000 Professional machine under him and has a problem - I enabled 3D acceleration in the page display the parameters of the machine, but Windows 2000 is not picking up on it. DXDiag (DirectX 9 .0c) claims that there are only 32 MB of memory, as a pose to the 128 MB which has been set up and he says also that D3D acceleration is not available.

  I tried enabling 3D on another machine with Windows XP Edition family, for DX9.0c DXDiag shows that it works quite well in this case - he picks up on extra memory and D3D acceleration.

  I tried to install Windows 2000 with acceleration disabled 3D, installation of the VMware Tools, then he subsequently, then re-install VMware Tools and the driver, but nothing is.

  If someone has had this problem and is there a way to fix it? I can't find anything that says that support for this under Windows 2000 is interrupted, I assumed that if it was good, my computer would not automatically him helped, during the creation of the machine, in the first place.

  Thank you very much

  I tried on my environment with 11 and 12 work workstation, I can reproduce your problems, I will file a bug to follow him.

  Hope dev can fix it.

  Thanks for your comments.

  Thank you

• Capture an image from a machine under windows 2000 server during production

  Hello

  We are looking to capture an image of a server windows 2000 (with sp4) has sql 2005 standard installed on it.  I've done a few machines and windows 2003 during production, while I used the converter and no problems.  Does anyone have experience with windows 2000?  I know that on windows 2000, a reboot is required.

  We bring the image into a villas of test to test the upgrade of the operating system to windows 2003.  Once satisfied, redo us the same process and will have ESXi host computer.

  BTW, the converter is version 3.03.

  Thank you

  TNT

  tractng wrote:

  Can someone confirm that during the capture of the image, the (any) services, sql, etc. on the operating system will continue to operate?

  I ran a test and see no problem but I just want to know that.

  I have captured many images of a windows 2003 while the services windows, sql server, etc. will work perfectly during the process.

  Yes, the services are still running.  However, it is normally recommended that you disable the services as much as possible.   If you have a lot of traffic to the server, the conversion may fail half way through.  And of course, all the changes bring users to data cannot be included in the image/converted data.  If the conversion is for dev/test, then it may be acceptable.

  When I did my hot clones, it was generally after hours so that I can disable the SQL and other services.  I've done a few hot clones with services running, but there is no user logged in, so very little traffic to the title of the conversion machine.

• Portege 3440 - cannot install Windows 2000

  Hello friends :)

  I have a problem with the installation of Windows 2000 on Portege 3440.
  I was running Windows 2000 with the FDD USBB (with driver for PCMCIA of CD-ROM) installation and CD-ROM PCMCIA. "Everything was ok at the moment when I came for winnt ' q.

  When installing without partition on the HARD drive was appeared on blue background information: "could not find a place for a swap file. With partition (FAT32, 6 GB): "Setup could not install the Windows boot loader. To ensure that your C: drive is formatted and that the drive is not damaged. I tried with three other HDDss.
  What should I do to install this system? (Same users do not have these releases)

  Thanks for help
  Adrian

  Hello

  1 don't forget to prepare your hard disk with fdisk (a bootable partition) and format it with the Fat32 file system

  2. start by a MSDos saved in your floppy drive-drive with drivers for your PCMCIA CDrom drive (Freecom)

  3. copy the entire i386 to the W2K installation CD directory your HD, be sure to have loaded smartdrive, otherwise it will take ages!

  4 start again with the saved, go to the i386 directory and start Windows NT

  You can look here for more information about freecom pilots and the bootdisks: http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=19232
  On your 3440 it should be easier than with the R100 because of normal 2.5 "HD 6 GB, but the problem is basically the same

• Tecra S3 - Windows 2000 hangs on reboot

  Hi all

  I have a Tecra S3 dual boot Windows XP and 2000, with the correct RAID driver installed for each of them.

  In Windows 2000, it hangs for a reset. It is necessary feed the computer works in order to complete the reset.

  This problem does not occur in Windows XP and BACK. Is there someone else by using Windows 2000 with this model?

  Thank you

  Rubens

  Hello

  Well, it's not easy to say why this problem occurs. I assume that you have installed the W2k since the original Windows CD. In this case, it is very important to install the driver Toshiba, tools and utilities in the correct order.
  On the Toshiba download page I found a statement of installation for W2k. This list gives you a good driver installation information. Please see this document.

  Good bye

• Windows 2000 version of the Power Manager for A75

  Hi all

  I installed Windows 2000 in an A75-S226, but I can't find a utility Power Manager for this OS. I tried the version of Windows XP, but as expected, it did not work.

  Is there someone else by using Windows 2000 with this model?

  Thank you

  Rubens

  Hello

  This unit has been designed and delivered in the U.S. market
  He was able to find a utility power for W2k on the site Web of Toshiba driver we.
  Please visit this link:
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_sc_dtlViewDL.jsp?soID=729833&MOID=713725&BV_Ses sionID=@@@0394886756.1138114313@@@&BV_EngineID=c ccfaddgkkelmigcgfkceghdgngdgmn.0 & ct = DL

  Good bye

• Why did datasocket works on some of the computers in a windows 2000 network, but not others?

  I use an executable program of labview which write Boolean arrays on multiple computers in a network and their bed on a computer 'server '.  All the client computers are running windows 2000 with the labview run time engine 8.6.  The server computer is running windows 2000 with the labview 8.6 developers edition.  I can only contact between a client computer and the server computer.  Communication will work either way between these two computers.  Either the computer can sucessfully read or write data datasocket.  Other computers cannot communicate in both directions.  All the computers are on the same network in the same workgroup and can see through the network.  It doesn't seem to be a firewall on all computers.  Suggestions?

  It seems he needs the installation standard/full engine runtime 8.6 with decision-making data.  I had the engine smaller run time file installed on the computers that did not work.

• connection to the network windows 2000 xp

  First of all, I know I use an old operating system but my accounting program is not beyond XP.

  My game is windows 2000 with two routers wired / wireless. The system works very well under the win2000 including access a system remote win2000. I am able to the internet via one router to another wireless. The I've seen is that I can't have the XP to see or join my local network. The win2000 see the XP but cannot go further than the display of files. the XP is set to shared the whole c drive.

  What Miss me on the definition of the XP to work with my win2000? Probably something simple I've missed or simply do not know.

  Note the XP is a system I have then given. He had a bit of virus and spyware that has been deleted and seems to be updated otherwise.

  Hello

  The Microsoft Answers community focuses on the context of use. Please reach out to the business community of COMPUTING in the TechNet forum below:

  http://TechNet.Microsoft.com/en-us/ms772425

• install Acrobat 7 and CS2 - applications running Windows 2000 and IE 6

  you need to install replacement for applications of Acrobat 7 and CS2 - running Windows 2000 and IE 6. No problem with that?

  Win 2000 server sp2 ok with acrobat 2

  Microsoft Windows 2000 with Service Pack 3 with cs2

• Kernell debugger dll missing or corupt in windows vista

  Windows crashed.  I have 2 errors: error System 32 and kernell debugger dll missing or corupt.  Tried backup to the previous week, months and months without success.  Tried to reinstall windows without success.  I have 2 hard drives, but did not understand how to install 2nd hard drive from computer to boot.  1702 Dell Vista, had service pack 2.

  Hello

  Here are the two ways that Dell allows you to reinstall Vista.

  How to reinstall from the Dell recovery partition:

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?c=us&l=en&s=Gen&docid=DSN_336966&isLegacy=true

  How to reinstall using the provided Dell recovery disk printer:

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?c=us&CS=19&l=en&s=DHS&docid=DSN_339949&isLegacy=true

  See you soon.