DAQ standalone system

Similar Questions

• Hardware config DAQ in System Explorer should match real material channels?

  I'm filling System Explorer configuration in controller > hardware > chassis > DAQ hardware. In this case, I have a PCIe_6343 Council. Not all e/s (digital, analog meters), of the Board of Directors must be defined in the solution Veristand System Explorer, or only those that I want to use?  For example, can I leave # DI = 0 and #DO = 0 if I only intend to use the differential inputs/outputs?

  Y at - it a tool that could transfer material MAX for System Explorer settings, because I have the feeling that I have to redo, which is already MAX... Or am I missing something?

  THX.

  See you soon.

  You don't need to define all the resources on your Board in the system definition.  It is recommended in VeriStand to fill the system definition with the resources you need.  The motivation is to load the system as little as possible.  Currently, there is no integration with MAX, but it is as well a System Configuraiton API and a Defintion of VeriStand API systems so you can build this feature if you want.

  Steve K

• There is a strange folder in my Options for the Protection of the system!

  The tab System Protection in system properties, which gives you options of system restore, there is a system volume that looks like there's a number of clsid.

  It is outside the usual partitions. Is this normal? It does not appear in Windows Explorer.

  The machine is quarantined and not visit the internet more, so I can't give you the screenshot. But it's the name of the folder:

  \\?\Volume{d331125c-e4fe-11E1-B1EB-806e6f6e6963}\  Below these are the partitions C: and E:, I created the disk during a recent clean install. The new internal drive is a WD 320 GB Scorpio.

  Previously, Windows wouldn't start and gave me a hardware error. I took the bottom of the laptop, reinstall the memory, hard drive and DVD - RW, it blew out and everything close up. It works fine now.

  However, I also had a problem of malware with Rimecud! INF, DelfInject.gen! BE and DelfInject.gen! AF, which is the reason why I ask this question. This file would be a remnant of malware? I wiped the disk four times.

  Hello

  The mouse interface will not be infected by the virus.

  Refer to this link and perform the virus scan using Microsoft standalone system sweeper tool.

  Utility Spotlight: Repair the Infection from your PC

  http://TechNet.Microsoft.com/en-us/magazine/hh547009.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  I hope this helps!

• Connection cRio 9074 second port ethernet to another device via VISA

  I'm trying to connect a DAQ Yokogawa system to a cRio 9074 via the second ethernet port. I activated the second ethernet port of the cRio with a static IP address on the same subnet as the data acquisition system. I installed the driver NI-VISA and NOR-SERIAL on the cRio. I can compile the code on the cRio and I'm sure that the code works when I connect to the acquisition of data to a PC. I get an error on the open VISA VI.

  Am I missing something or is it not possible to connect the second ethernet port on the cRio in this way?

  Thank you

  Thank you for your response. I found the same information that you provide, but decided to give it a try.

  A few minutes ago, I was able to perform communication between the cRio 2nd access Ethernet DAQ Yokogawa. I managed to do it using the VISA controls. To communicate with the host PC, I get the information of the DAQ with the cRIO as described above and then use shared variables to publish data on the network connected through the first ethernet port.

  If anyone wants to reproduce it just to make sure that the two ethernet ports are configured with IP addresses on different subnets that are configured for TCP communication. If more details are to be simply send me a message.

  Kind regards!

• Downloaded Windows XP-KB310994-SP2... Win32 Cabinet Self Extractor to my USB drive and now can not download on my netbook.

  December 14, my computer started to have the blue screen of death. I had downloaded porn movies and reg (I'm single :-)). I didn't know I was asking REALLY bad things that can happen to my computer. I could get in on safe mode and download superspyware, malware, optimizers, and memory settings. I now can open Windows XP, but only for a few minutes before the CRASH produced big timeownload title and wanted to d! I sand wa to download from my USB (recorded here until knew more...), but try it gives me a msg "unable to operate as an external device doesn't work does not correctly. Can you helpme download or have the best advice for a solution to my problem of computer - memory and several start-up/corrupted files I am sure. Always get the msgs. «the memory could not be read...» ».

  Hello

  The issue seems to be caused by a Virus/Malware.

  I suggest that you download and install a complete analysis of the system using the Microsoft Standalone System Sweeper Beta.

  Microsoft Standalone System Sweeper is a recovery tool that can help you start an infected PC and perform offline analysis to help identify and remove rootkits and other malicious software developed

  To download the Microsoft Standalone System Sweeper click on the link below

  http://connect.Microsoft.com/systemsweeper

• CD to scan for viruses

  I need a live CD/DVD to boot-able to remove virus on a PC running XP, if it matters.

  Microsoft Standalone System Sweeper

  https://connect.Microsoft.com/systemsweeper

  Check system requirements (min. 768 MB RAM for XP)

• My computer would boot, but all programs would freeze after about 30 seconds. Now computer will not start help to...

  all programs would stall on 90seconds after departure upward, you can move the cursor, but nothing happens.  ATM the cpu does not start even upward.  I suspect a worm I can do?

  If you think that it is a worm or a virus, you can run a standalone virus scanner that starts from a CD/DVD or USB

  key. You need a working PC to create the media on.

  This is a stand-alone scanner: https://connect.microsoft.com/systemsweeper

  And here is the process of creation of the standalone scanner documented with screenshots:

  http://www.Winhelponline.com/blog/standalone-system-Sweeper-offline-scanner/

  You say that the PC does not start at all ATMs, which could also be caused by hardware or disk corruption problems.

  To see if his corruption of the disk, a secure boot (F8) and select "command prompt only. Then at the command prompt

  type: chkdsk c:

  It will then check the file system on drive C: for problems and if possible correct them.

  If it's a hardware problem... I can't.

  I wish you good luck.

• How to remove multiple Vista computer virus

  My father has Microsoft Vista and recently got some virus.  It is one of these elderly people that click on what anyone who jumps over the course to have his computer, I always been able to fix it.  Now what ever he did does not leave my virus on computer programs to work even. I tried to install new things and would not even open.  Each .exe now comes with the question of "what program you want to open with?" and gives nothing option.  Any suggestions cause im pretty well done with what I can do.   Oh it dosent want to reformat, unless he needs.  Help, please!

  * original title - virus help... PLEASE, I BEG YOU! *

  You could try an analysis offline to a drive CD or USB using Microsoft Standalone System Sweeper.

  http://connect.Microsoft.com/systemsweeper

  You can ask for help on a site of specialist like http://www.bleepingcomputer.com/virus-removal/ malware removal

• How can I remove a virus from my computer?

  Original title: I have a virus that attacked my operating system. I can not access virus scan to get rid of the virus. Is there some command prompts that I can use to scan and get rid of the virus?

  I got a virus email facebook. Now I can not access my computer. Need a command prompt I can use to scan the computer for viruses.

  If your computer does not start, you can use Microsoft Standalone System Sweeper to start from a CD or USB drive and a virus scanner. You will need to use another computer to download and create the CD.

  http://connect.Microsoft.com/systemsweeper

  If you post a description of the symptoms of the virus, a person may be able to identify and give you removal instructions.

• Trojan:DOS / Alureon.a under vista and it will not erase!

  I used Microsoft Security Essentials, and it's not about him, other than the ID. Continues to freeze my Toshiba laptop and popups appear and Windows cannot check the updates. How can I get rid of this?

  See the instructions of recovery here: http://www.microsoft.com/security/portal/Threat/Encyclopedia/Entry.aspx?Name=Trojan%3aDOS%2fAlureon.A

  Note that you need a full installation of Vista disc to repair. The manufacturer's recovery disk will not work.

  TDSSKiller from Kaspersky can work http://support.kaspersky.com/faq/?qid=208283363

  You can try a sweeping security offline using Microsoft Standalone System Sweeper.

  http://connect.Microsoft.com/systemsweeper

• My PC is infected with Vista Antivirus 2012. He keeps me get on the internet, so I can't use malwarebytes or antispywaredoctor because I can't go on the web, even in safe mode. Any help, please.

  My PC is infected with Vista Antivirus 2012. He keeps me get on the internet, so I can't use malwarebytes or antispywaredoctor because I can't go on the web, even in safe mode. Any help, please. How can I get rid of it when I can't get on the web?

  Try using the Standalone System Sweeper http://connect.microsoft.com/systemsweeper

  You download it on another computer and copy on a DVD drive or USB key. You can then do a scan without starting Windows.

  There is a list of CD received by other vendors antivirus here:

  http://www.TechRepublic.com/blog/security/rescue-CDs-tips-for-fighting-malware/3803

• Alureon Trojan & reboot loop

  My asus laptop (3 years) a 'alureon trojan', my anti-virus figure it out this morning. But now, my laptop is in a continuous reboot loop and I can not even past. I tried connecting all modes and it restarts just my computer. I don't know if it's the job of the Trojan horse (I am not very well informed on computers) or something else, but if it isn't then I can't even past the BSOD page to fix my Trojan? Can someone please help? I don't need to work I just want the BSOD. I reformat my laptop but I have some very important pictures (sentimental) that are only on my computer.
  Can someone help me please?
  Thank you
  Camille

  You can use the Microsoft Standalone System Sweeper to try to remove the Trojan horse without starting Windows.

  If System Sweeper cannot repair your computer, you will need to use a Linux system on a CD or USB stick to copy your photos from the hard disk before get back you in shape. Post back for more if you need to do.

• How do I wipeout my computer any kind it starts with only the essential (Microsoft Word, Powerpoint, etc.)?

  I keep getting notices that my RAM is full, and it fails.  In addition, my hard drive was a 'bad sector' to this topic, what do I do?

  You can be infected by a fake computer optimization program. Get you the pop - ups that require you to buy software?

  Does look like this or this ?

  If this is the case, you can try the bleepingcomputer.com removal instructions.

  If this does not work, use the Microsoft Safety Scanner or the Microsoft Standalone System Sweeper

• How can I remove this virus?

  I have some sort of virus, worm or Trojan that has disabled the MSE. I tried to scan MS security a number of other malware programs to remove this virus without result. It is also my browser to unsolicited sites hijacking. How can I remove this virus?

  Try a stand-alone tool like Microsoft Standalone System Sweeper. You run this without starting Windows, it bypasses the defenses of Malware.

  http://connect.Microsoft.com/systemsweeper

  If this does not work, you should work with a malware removal website as http://www.bleepingcomputer.com/

• Unknow Miscall invite themselves to SX20

  Hi Patrick,

  One of our customer use SX20 and is a standalone system configured with gateway and Ip subnet.

  in the idle mode or VC call continues to get an incoming call and incoming call appears with the number of post and @ and SX20 codec IP.

  "Slow motion" sometimes a miscall shows miscall up to 1000 it is irritating to the teleconference.

  Please suggest what to do.

  Thank you & best regards

  Ludivine

  Power off to SIP ListenPort, and/or disable SIP completely stop the [email protected]/ * / _IP calls.

  No adjustment on the codec itself cannot stop calls "cisco", that's why you need your point of endpoint behind a NAT device or close the firewall completely and allow only certain IPs you conference with.

  If the presentation of two screens has been resolved since then, can you please make this question as answered.  Thank you.