DAQmx screws missing

Similar Questions

• Waveform output n-times with DAQmx screws

  Hello

  I want to output to an analog waveform 1 d a specified number of times.

  The problem is that I am converting a Labview 7.1 to 9 Labview program.  To do this, the Legacy DAQ screws must be replaced with modern versions of DAQmx.

  The old 'AO Start' VI allowed the user over the "number of iterations of the buffer" and it would simply exit the waveform given that several times.

  There seems to be no way to do this with the new DAQmx screws?

  Other people have said:

  "To produce an n-time waveform, simply call the VI"DAQmx Start Task"that many times."

  This won't work, as long as the task is stopped before trying again - HOWEVER, this is not the service I need for the following reason:

  -There is a delay between the end of the output waveform and the beginning of the next iteration of this waveform, in the order of 15 ms.  It is unacceptable, there should be no delay.

  "A form of continuous output, just wave wire wish all waveform to the 'DAQmx write" VI".

  It is also unacceptable that I went out on four-lane 1 MHz, with iterations of waveform more than 100.

  Does anyone know how to produce a waveform of 1 d n-times without the problems mentioned above?

  Thanks in advance,

  Chris.

  Hi Chris,

  The best way to get the functionality that you are looking for must first consider the size of your waveform.  Let's say for example it is 1000 samples.  If you want to generate this amount of waveform a N cycles, should perform a simple calculation to take the size of waveform table times the number of iterations, and set up a finished task of output to the output as many samples.  So let say we want to exit 20 cycles of our sample of 1,000 signals, we would put up a VI of Timing DAQmx for finite samples, and samples per channel at the output of the task must be 20,000 samples.  Thus, you generate continuous 20 cycles of your waveform before going out and turning off the task.

  We will find a good example of base from here, make over, change the waveform to VI to your real table and set the terminal of samples per channel to the amount calculated in the way I did above.

• How to get the text enum I32 an uncontrollable (I / config terminal p side assets in the DAQmx screws)

  Hello

  I use DAQmx screw create clock.vi channel.vi and sample, they have entered (Terminal configuration of entry) and (active) both are I32 and have enum watch drop-down options. I want to use these text values to put in my excel file, but they give numerical codes associated with respective option. is it possible to get the text as it is.

  It is not an enum but I32 resembling enum...

  Help, please...

  Thank you

  In fact the active side is a control of the ring. Just a click and create a property for text.text ring node. This will give you the selected channel when the property node runs.

  I hope this helps.

• Screws missing or loose Satellite Pro R50 - B - 12 p

  I am the IT Manager for a number of primary schools in the United Kingdom.

  Schools have purchased a large number of Toshiba Satellite Pro R50 - B - 12 portable p 12/18 months from various suppliers. It has been brought to my attention that a large number of laptops lack screwsfrom the merits of the case.

  Because there are so many missing or loose I thoughthat one of these children might do. However, I started to see the same thing is happening in other schools with the cell phones of students and teachers as well s.

  I believe we have more than 50 laptops and all have at least a screwmissing, most have a lot more. I started to see laptops with more than 10 screwsmissing and the case began to unravel. As I see so much of this virtue, being due to a manufacturing problem.

  Is it possible that we can be provided with screws in number (100 +) Datacasting so those missing can be replaced.

  Concerning

  JohnD

  Posted by jdourish
  

  I am the IT Manager for a number of primary schools in the United Kingdom.

  Schools have purchased a large number of Toshiba Satellite Pro R50 - B - 12 portable p 12/18 months from various suppliers. It has been brought to my attention that a large number of laptops lack screwsfrom the merits of the case.

  Because there are so many missing or loose I thoughthat one of these children might do. However, I started to see the same thing is happening in other schools with the cell phones of students and teachers as well s.

  I believe we have more than 50 laptops and all have at least a screwmissing, most have a lot more. I started to see laptops with more than 10 screwsmissing and the case began to unravel. As I see so much of this virtue, being due to a manufacturing problem.

  Is it possible that we can be provided with screws in number (100 +) Datacasting so those missing can be replaced.

  Concerning

  JohnD

  Hello

  I am COMPUTER technician in a school and we had the same problem - our portable initials were C50-A-1MX models that were very good, but we have recently been making models R50-B-12W who lose all the screws from the bottom and are therefore originally business start to come out, I noticed. Is this a known issue for Toshiba and is there any screws of bugs/spare parts available?

  Kind regards

  Sam

• DAQmx base missing tdms

  I have a vi (written in labview 8.6) that I am trying to run it on another pc; However, after you install the trial version on the other pc and daqmx base, I can't run it. The PDM vi is missing. They are not in the basic version of data acquisition?

  The ability to use DAQmx to log TDMS is limited to DAQmx and is not supported in DAQmx Base.  To use this feature, you need to use DAQmx.

  Kind regards

• EXE cannot load DAQmx screws

  I have LabVIEW8.6 and NOR - DAQ8.8 on my system.  I created my EXE and Setup successfully.  When I installed the program on the machine of laboratory, I received the following error message when I tried to run the program:

  LabVIEW: Resource not found

  An error occurred loading VI "DAQmx clear Task.vi.

  LabVIEW support 3 error code: could not load front panel

  I checked the DAQms screws are under the directory C:\Program Files\DrawTest\data of support and the exe is located in C:\Program Files\DrawTest.

  Did you include the DAQmx driver in your Installer? Have you included MAX and exported the hardware configuration of your pc?

• Problems with DAQmx - tasks missing when I run my application on another PC

  Hello

  I use a NI USB 6009 and my program use DAQmx and different tasks for the input and output signal.

  I created an application and I want to run this application on another PC, which doesn't have the development environment, but the runtime engine and installed MAX. This PC is connected to the NI USB 6009.

  Now, I have the problem that the tasks are missing on this PC and I get errors when I run the application.

  I wonder why these tasks are not put into the application automatically? What should I do now? Can I somehow export tasks in MAX and copy them to the other PC? Is not complicate it?

  Hi Johannes,

  Have you created your tasks of measurement and Automation Explorer?

  If this is the case, you must export the file of configuration of measurement and Automation Explorer and then import it on the other computer.

  With LabVIEW 2010, you can import a configuration via your Installer file, but I don't know if you can do it with LabVIEW 7.1

  Kind regards

• Screws missing Acer Aspire S5-391

  I will try to summarize what happened here:

  My laptop is out of warranty, already, I, however, he was sent to a repair shop that was supposed to be authorized by acer, because the fan starts to make a lot of noise, this being a ultrabook I didn't want Amadou with her.

  I waited for 20 days until the guy at the shop told me they sent the bad new fan, I just need to get some info for the work of the computer, got a little desperate and just picked up and ordered the fan on ebay to replace it myself, unfortunately, the returned the laptop repair shop miss me a lot of screws tiny screws. Of course, they said that it was not their fault, blah blah.

  Question: anyone know what size are these screws, specific for this model (Aspire S5-391)?

  Thanks in advance!

  Here are all the screws. You should be able to determine which ones you need.

  

• screws missing from the bottom of the laptop (S3 - 392G)

  Hello

  I have a used s3 - 392 g Acer laptop and I noticed that some of the screws on the bottom are a little loose and it has actually fallen!

  I was wondering where I could get replacement screws? There are many online auction sites, but I'm not sure what I need and I can't find more info online. The screw that I'm missing is one of those on the bottom of the laptop, taking the whole shell. There are 11 of them in total, and is on the right edge of the laptop.

  Thank you!

  Thanks for the photo!

  The missing screw specifications:

  86.2ZR62.6R5 - SCREW M2.0 x L6.5x (L = length) - Qty 8 on the bottom.

  

  The screw located on the other side is exactly the same. You will be able to measure the diameter, the thickness of the head.

• Screws missing Acer Aspire ES1-511

  Hello so I have an Acer aspire es1-511 they are outside of the merits of the case and I'm missing about 3 screws do you know what size are they? or where I might be able to get a few screws of this size? I understand that you're not suggesting 3rd party but I really need to do. A little, I prefer to keep my thanks own technolagy for that meet. also do you know if a M2.5x8mm screw would hold? I am from, Alberta, Canada

  Can be here but 50 pieces for 6CAD + free shipping.

• Screws missing Acer Aspire V5-471

  For some strange reason, two of the screws of my laptop fell, the two rear, top left if the laptop is in front of you. I plan to buy a replacement. Anyone can be of service in informing me of what size and type of screws should I buy?

  Easy to solve! Take your machine to a hardware store and have them choose the correct screws for your laptop.

• Screen hinge screws missing next to power button to Aspire 1830-3595

  I have 3 laptops Aspire model 1830-3595, 11 "screen, bought in 2011. Two of them lost the screw that holds the hinge on the left side next to the switch. In addition, the nut supplied with the hinge holding the screw broke off.

  Where can I get a new hinge and screws?

  Ok. Here are the part numbers:

• F6C79PA #ABG: HP Envy touch notebook PC screws missing.

  Hi, I bought two HP TouchSmart laptop computers want last year some time. I have no notification marking until now both computers laptops are messing around a screw, this was noted when left that holds the hinge broke off, causing an internal fan to no function. One of my computers laptops now dose will not work, has developed an error message about 'system fan 90 b' does not properly. I need this problem fixed as soon as POSSIBLE, any other necessary information let me know, thanks - Rold

  Thanks, Omar

• OptiPlex 7040 Micro screws missing and clips for WiFi card

  We have just purchased four Optiplex 7040 Micro computers and open one open to see how they can get to everything in a small box.  By doing this, I noticed that the WiFi card has not been pressed by what it is.  It doesn't look good for me, so I opened the rest.

  One of them had a clear plastic retainer clip, with a screw now with card Wifi supported firmly in place.  The others had a screw, but not clips.

  Since then, I spoke with technical support and support enforcement.  They tell me that they cannot just send screws and Staples, only completely new computers.  Looks like a complete waste for me.

  Does anyone else have this problem?

  

  

  It's normal.

  The newer chipsets have a sink of heat and the Z bar.

  

• Vision and Motion screws missing

  Hello

  I have installed (in order):

  -LabVIEW 2013 PDS 64 bit

  -Vision Development Module 2011 64 bit

  -LabVIEW PDS 2011

  The range of Vision and movement is visible in 2011 and 2013. But in 2013, the palette is empty.

  I could get this to work?

  Thank you

  Hi Marvin,.

  in your case applies the first photo: LabVIEW vs VISION!

  And it shows it clearly: you can use any version VISION from2011 with LabVIEW2011VISION.

  But to use LabVIEW2013 , you need to install VISION2013 (or newer).