DAQmxWriteDigitalU8 mod writing

Similar Questions

• Differences between the blend modes and WriteCopy?

  Hi all.

  By reading the manual of ThinApp, I read:

  "To allow the application read the resources on and write to the local computer, keep the default Merge isolation mode." This means that the application can change the elements outside of the virtual application package. Some applications depend on the dll and registry information in the image of the local system. VMware recommends this mode for applications that do not write in directories system, such as Firefox. ThinApp runs on the physical file system write operations, with the exception of the following directories and their subdirectories that redirect write operations to the sandbox:

  %AppData%\protector.exe

  Common %APPDATA%\protector.exe

  Local %APPDATA%\protector.exe

  %Program % common files

  _ % _ % ProgramFilesDir

  SystemRoot

  SystemSystem % %

  To allow the application read the resources on the local computer and restrict most of the changes to the sandbox, select the isolation of the WriteCopy mode. ThinApp intercepts write on all directories operations and redirects them to the sandbox, with the exception of the following directories and their subdirectories that redirect write operations to the physical system:

  Office %

  % Of staff

  % SystemSystem%\Spool '.

  Thus for example, in has two modes, writing of the files by the program bundled in ProgramFiles is redirected in sandbox.

  I do not understand what the differences are. And on full mode?

  I thank in advance

  JP

  Yes, it is not done it myself but can't see why not. Note that the value of the Isolationmode in package.ini is not systemwide. Computer desktop and my documents are exceptions. So to sandbox these directories, you need to copy a #Attributes.ini existing file in the captured file, place it in % office and modify it to ensure that its isolationmode is set to WriteCopy. (The default level is still merged) and then rebuild. It may be useful

• Add in one file other than (s) opened for reading or wirte

  Hello

  I work in the lab will be using barcode readers to scan the hardware id for all of his test at the beginning of each test. A material is scanned several pieces of information about the equipment will be appeneded in a single file named because equipment is scanned. So over a period of time, we can look at the different files and see when they material was used (by a stamp) and where it has been used.

  So I need to be able to update a file that could be opened by others (be it in playback mode / writing). If anyone has any ideas/suggestions on how I can add to a file that somene has already opened for reading?

  Access, SQLServer, MySQL, Oracle and any other database can be used. I do not know to Oracle, but others are provided with MS Office, have a free version or free. Access is suitable for a small number of users. Others are more robust and suitable for businesses. OR sell the database connectivity Toolkit, but there are several free alternatives.

• MD1000 thus slows the transfer of large files

  We have two MD1000 SAS attached to a Dell R710 Server storage arrays.  During a large file transfer (40 + GB) at one of the tables MD1000 it will slow down the way down for analysis.  It seems as if it is slowing down at the same location every time we try to transfer a file.  The another MD1000 connected to the server has no problems with file transfers.  This only happens when we copy to the MD1000.  Copy of the MD1000 works as it should.  Smaller files transfer copy very well.  The Dell Server Manager shows no errors with everything.  PERC card batteries are low or bad.  Any suggestion is appreciated!

  Hello, jsalyer350.

  It seems to me that your PERC could be set in mode 'Writing with' - where data passes the cache and writing "across" the disks. This can be VERY time consuming, because you are waiting for the real moving parts. PERC would be required to be paid in "Writing Back" mode, where you can make using the cache of the and have a single stream of data on the disks.

  PERC can be put into "Write-Through" mode if the battery is not, loses the ability to charge to hold the cache, etc. Maybe the battery charge lost and then has been charged, but the setting has never changed.

  You should find this setting in OMSA, otherwise after back and let me know.

  I hope this helps. Have a great rest of the week.

• Debug the anonymous block

  Hello
  DBMS_METADATA. GET_DDL package can be used to extract any database object DDL script. I use it to extract the tablespace script. I want to write all the script maps to file. for this I use UTL. FILE to write the file. She run but write a single tablespace file in script. here my Code
  

  create or replace
  PROCEDURE dpr_clobToFile(p_clob IN CLOB ) 
     IS
  
    c_amount         CONSTANT BINARY_INTEGER := 32767;
    l_buffer         VARCHAR2(32767);
    l_chr10          PLS_INTEGER;
    l_clobLen        PLS_INTEGER;
    l_fHandler       UTL_FILE.FILE_TYPE;
    l_pos            PLS_INTEGER    := 1;
  
  BEGIN
  
    l_clobLen  := DBMS_LOB.GETLENGTH(p_clob);
    l_fHandler := UTL_FILE.FOPEN('DATA_PUMP_DIR', 'MY_FILE','W',c_amount);
  
    WHILE l_pos < l_clobLen LOOP
      l_buffer := DBMS_LOB.SUBSTR(p_clob, c_amount, l_pos);      
      EXIT WHEN l_buffer IS NULL;
      l_chr10  := INSTR(l_buffer,CHR(10),-1);
      IF l_chr10 != 0 THEN
        l_buffer := SUBSTR(l_buffer,1,l_chr10-1);
      END IF;
      UTL_FILE.PUT_LINE(l_fHandler, l_buffer,TRUE);
      l_pos := l_pos + LEAST(LENGTH(l_buffer)+1,c_amount);
    END LOOP;
  
    UTL_FILE.FCLOSE(l_fHandler);
  
  EXCEPTION
  WHEN OTHERS THEN
    IF UTL_FILE.IS_OPEN(l_fHandler) THEN
      UTL_FILE.FCLOSE(l_fHandler);
    END IF;
    RAISE;
  
  END;

  the call of this block anonymous sp
  

     declare c clob;
  --fHandle  UTL_FILE.FILE_TYPE;
     begin
     -- fHandle := UTL_FILE.FOPEN('DATA_PUMP_DIR', 'MYFILE.TXT', 'w');
      for t in( select tablespace_name from dba_tablespaces where tablespace_name like 'ECP01V1_B010_DATA%')
      loop
       select dbms_metadata.get_ddl('TABLESPACE', t.tablespace_name) into c from dual;
      
       *dpr_clobToFile(c);*
      end loop;
     end;

  There are nearly 100 spaces of tables in my database where the above script write a single script of tablespace to output file. any idea? How can I debug this scenario through SQL DEVELOPER
  
  Published by: user10858330 on April 2, 2012 02:42

  Hello

  user10858330 wrote:
  There are nearly 100 spaces of tables in my database where the above script write a single script of tablespace to output file. any idea?

  Well, you open the output mode 'w' file each time, take a look at [url http://docs.oracle.com/cd/E11882_01/appdev.112/e25788/u_file.htm#i1003526] UTL_FILE documentation:

  * open_mode *.

  Specifies how the file is opened. Modes include:
  r - read the text
  w - write text
  to add text
  RB - reading bytes
  World Bank - in mode writing bytes
  AB - append mode bytes

  Therefore, for a loop of 100 case, you replace the DDL 99 times past.

  I see 3 lines of resolution that:
  -Open the file in Add mode (a or ab). But you have to make sure that it contains no tricks of previous test cycles. (ideally, first open the file in mode 'w', then all subsequent occurrences in Add mode ("a" or "ab"))
  -Open outside of the loop (in mode 'w') and close the file when the loop ends
  -Open a different DDL file for each tablespace (perhaps by adding the nom_tablespace in the output file)
  I would prefer #2 or #3 +(depending on how you will be re-using those DDLs) solution.

• How to set up a virtual file?

  Sorry, but I'm having much misunderstood the manual.

  I create a portable application on USB.  Copy/isolation mode writing.  I need to have a folder with a list of documents available in the packaged application.

  How can I change the package.ini so it creates this file in the sandbox, so that I can go later when I run the app packed via USB on another computer?

  Almost...

  @1) is it. ------< folder_name >

  This is the folder that the sandbox will be created. By assigning '. \MySandbox' the sandbox for the project will be created next to the exe you start.

  (@4) also do not remove the line ": P so you should have: #Attributes.ini

  DirectoryIsolationMode = full

  (The {} must be [], misinterpreted by the linker)

  By initially coying files %-personal folder these files will be there by default. When you delete the sandbox of the original version will be there. Verify that this is the goal... (Handy if you need to distribute with your distribution of office manuals in a company)

  Kind regards

  Michael Baars

• When writing an F9 email no longer displays the address book unless in safe mode, how do I solve this problem?

  I tried to search the frequently asked questions and did a search first. It did not work, what I found F9 turns the initial contacts on and outside, but does not solve the problem with the component being wrong.

  Until a very recent update (last week or two at the most) when I type writing, the contacts pane in the window of writing have shown my address book. Now it shows some kind of research, that I can't use because I have to see all the entries to see which ones I want to send an email. In some cases, I have multiple entries for a person based on their having several email for different types of e-mail addresses. Try to remember those who want DOESN'T WORK for me. I can't get this behavior in safe mode. As an alternative, I need Thunderbird to save my setting of safe mode, so I don't have to reconfigure the SafeMode whenever I have to restart windows or restart Thunderbird. I currently come in default safe mode

  I tried to remove and then install an older version of Thunderbird and the pane bad contact on the left was there. I can't find any setting to change the part of that wrong at the old I need. I would rather not try to reinstall win7 pro from scratch for this problem, assuming that would fix it.

  I am running windows7 64 bit pro

  It was very strange. Now things work properly and I don't know why. I want to thank everyone for their help. The image shows the first letter of the contact you want on screen messages write with the address list. Before it wasn't to show a list of addresses, just search options to search for address books. I think I'm more confused then I was before. I'll try a reboot and see if the message of Scripture remains fixed.

  Once again, thank you for all the help and hope that the correction is corrected.

• I run my pc on safe mode but I can't change the screen reselution so that everything fits in and when I'm on fb I ts large and I can't read the writing can help you

  I have windows vista Home premium, I'll have to start safe mode because I was getting the r300 driver error all the time and I need to get writing and screen resolution changed so I can see it when I go to fb, I can hardly read the writing when I do the smaller screen, I can't play games like they wont take in can help you please

  Hello

  You can not change the resolution of the screen and follow other information support technician gave you while you are using safe mode.

  You must be in Normal mode to do so.

  See you soon.

• Keyboard for blackBerry Smartphones stuck in portrait mode when writing and reading messages

  Hi all

  I really hope you can help me solve my problem. Since a few days, my keyboard is stuck in portrait mode when I'm in the Messages menu. No matter what I do, it cannot switch to see the landscape. I tried to rotate in all directions, but without success. Apart from the Messages menu, the keyboard orientation changes as it should. But at the time wherever I press the Messages button, the display immediately switches to portrait. Apparently I blocked it somehow, but I can't unlock it now. I tried all the options, I changed the sensitivity of the change of the screen, but nothing. It's really boring to write e-mail messages using a SMS keyboard. Can someone give me advice how to restore the display of the landscape keyboard?

  Thank you very much in advance.

  Hi and welcome to the Forums!

  Whenever random strange behaviors creep, the first thing to do is a battery pop reboot. With power ON, remove the hood back and remove the battery. Wait a minute, then replace the battery and cover. Power on and wait patiently through the long reboot - about 5 minutes. See if things return to functioning. Like all computing devices, BB suffers from memory leaks and others... with a hard reboot is the best remedy.

  Best!

• In the window of writing V.31.3, there is no option "insert" on the toolbar and ctrl-l does not. I can't find any way to insert a link.

  14.04 Ubuntu

  According to me, he's working the composition in plain text. Hold the SHIFT key when you click Write, reply to or forward. Raw text does not support inserts so that they are not available in the toolbar or menu when the text is in use.

  It is supposed to open appropriate, responses and transfers in text mode compatible with the original message. The default for writing new messages is defined in the account settings. However, it is also possible to define default values of individual Contacts and also to specific areas, so in my humble OPINION, it's too easy for a contradiction or incompatibility to ask how the behavior can be unpredictable.

  And I think it's buggy. I sometimes write to a newsgroup where HTML is frowned upon, so TB is put in plain text but almost always chooses HTML. Go figure.

  You can simply paste the links in the text. There is no need of the Insert | Link antics.

• Why Firefox from writing so given all the time?

  I'm running Windows 7 x 64 and Firefox 8. In my task manager, I display the bytes of i/o to write to all processes. I found that Firefox is ALWAYS the process with the largest amount of bytes in writing, after that it worked an hour or two even though there are dozens of other processes. The only Web page is Google and all my plugins are disabled.

  Why Firefox from writing so given all the time?

  Firefox can be updated from the database of phishing protection or maintenance with other files as places.sqlite. It should be limited to a point if this was done.

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions of the origin of the problem.

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.com/kb/safe+mode

• Firefox starts with a home page in Chinese writing!

  Whenever I close Firefox and restart that I took on a site that is not my own (a filled with Chinese writing!). I tried the obvious things like resetting my homepage, starting with a new profile, restart in safe mode with preferences reset default etc, but as soon as I open Firefox again once, it always goes to this page. Can anyone help?

  Fixed - but the only way I could do it was to uninstall firefox and then download again. Luckily, I backed up my favorites...

• On the Satellite X 200 CD writing

  I use Nero 8 Vista, if the laptop enter mode low power collapse the writing process fails? Or is the drive activity stop laptop switch to low power. Now I have deliberately, move the mouse sometimes. I've never written a CD on a portable computer. I need to put a desktop profile?

  Hello

  I use Nero for a long time and never noticed any problems. Because of this, I can say that your choice of burning software is very good.

  Secondly, I must say that every time when I burn the CD or DVD I use maximum power settings constantly and I win don't not t, during the burning process, something's wrong. As far as I know nothing happened, but if you burn CD/DVD you can wait 20 or 30 minutes before switch you to low energy consumption. Am I right about that?

  But Jonny right. If you want you can create own power management and use it every time when you want to burn CD/DVD.

• delays when writing with the pec in Portege M200

  I face a very obvious slow in exercising the hand writing in tablet mode.
  usually, I write "with a single note" and writing is instantly displayed in normal writing on paper.
  but when I tilt the screen to be in tablet mode, what I write is not displayed unless I finished the whole word, and display is normally extremely slow.
  Although if I tilt the screen to normal laptop mode "with the same session a note" the speed is back to normal.
  Please notify.

  Hello
  I ve tried to simulate your problem with my M200

  I couldn't see a Performance distinction between modes of Tablet PC and the PC Normal.

  Could it be that you´re by using the Tablet PC Modus in battery operation?
  Then of course as a result of the power management the M200 runs slower.

  Good bye

• M30 DVD-UDF & DVD + R writing

  Hi people,
  I wonder if anyone has figured this out already...

  So I try to use the format UDF DVD + RW on my M30, using Nero InCD. Initially, InCD would not install and tell me that there is a conflict with the DVD-RAM drivers.
  After installing these drivers (after all, price and availability of the media doesn't it look likely that this format has much of a future, and using updated UDF shaped allows to achieve the same results at a lower cost and liked compatibiliy), InCd works very well on my burner DVD EXTERNAL (Iomega Super DVD USB), DVD + RW and CDRW similar. However, the engraver of DVD INTERNAL of the M30 would only form CDRW in UDF format. When formatting DVD + RW to UDF, the program may report an error, at the same time of the formatting process. When loading a DVD + RW that has been formatted UDF disk EXTERNAL, internal drive of the M30 would be recognized properly, read the files it contains, but be unable to write to disk (showing free space 0) and load files in read-only mode. The problem is obviously not with the media itself, given that the drive would erase them without problem and write them in normal CDFS format as well. It seems somehow the firmware of this player prevents handling format UDF DVDRWs. Went to mast * a.com, but it is not help. Anyone any idea?

  -also, did anyone have any success since still write DVD + r on this "Multidrive"? I tried several cheap and more expensive, that works on my external hard drive, but none on internally - he will write for them (at the speed of 2.4 x while the external drive wrote for them at 4 x), and then invariably at the end of process, give a message such as "error - could not perform disc at a time." (However, the internal drive reads DVD + R, written on my external hard drive without problem). Among others, I tried Dysan DVD + R and DVD - R not the cheapest Dysan things - and the DVD - R would work fine, while the DVD + R would not. Funny thing is this work of DVD + RW on this drive very well.
  So are there any success since still writing DVD + r on this drive? And if yes, what brand?

  see you soon
  hwbeirut

  I wrote TDK DVD + R 4 x successfully and reading them later in different DVD readers.