Dashboards and dynamic login screen

Similar Questions

• Windows 7 Pro black screen with cursor on all modes and no login screen

  OK so basically, it's how, my laptop decided to me-screw right when I need to make some adjustments to my final project for next week.

  Friday he started very well in class and at the end of the course at 6:30, I stopped him. I normally don't that often stopped because I usually find myself opening upward in an hour later. But I did this time and when I got home and turned on around 9:00, it started like this:

  Screen Compaq PhoenixBIOS > Windows boot animation > black screen with cursor mobile, no login screen

  No screen connection. No sound. Not nothing but a black screen and the cursor movement. So I force shutdown and turned it back, this time he asked a chkdsk and I ran it. A ton of stuff file unreadable came and it took all night to run through it all. Tried to start again and Windows Error Recovery came and I tried all Modes of security and start normally and all produce the same black screen and the cursor with no login screen.

  Then I used my Windows 7 dvd repair to try and system restore to a week before. That's where I noticed that windows had installed a critical update at 12:00 on Friday. Tried to restore before that, but he failed. Gave me an error 0 x 80070057 and said I should run chkdsk /r and then try again. Then I used the cmd prompt through dvd repair and he has seen all these things wrong file again once recovered things then realized hours later. Tried to restore the system again. Still the same error. A run chkdsk again through the cmd prompt, then he went to clean without errors or orphaned files or anything, but it took a lot of time. I used the Startup Repair, and he has not found anything wrong either. But still the same error the system restore.

  So I looked around online for the last two days, trying to figure out and that someone said to try CTRL + Alt + Delete, the sticky shift key thing. So I tried to boot the system again, same black screen with cursor movement. I did CTRL + Alt + Delete, nothing. Press and hold the SHIFT key, and a pop-up window asked FilterKeys. Press the SHIFT key 5 times, a popup asked about sticky keys. But that's all I can get it to do. Nothing else. I tried to boot into safe mode with F8, chose, each of them and that changes in screen resolution and the words "safe mode" in all the corners of the screen. If the repair dvd's while I start in safe mode, it will open as well in safe mode, but with the same black background mode. Tried running sfc/scannow through repair invites cmd of the dvd and it says a system repair is pending and he had to restart, and then run the sfc/scannow. Tried, but it doesn't do anything when I restart except go to Windows Error Recovery asking either start in any safe mode or normally. And then it's just black screen again.

  So I am at a complete loss what to do now. After all of this mess, it seems that this Windows Update Friday afternoon did something and when I booted it upward once again, his cause nothing but problems. I think it has something to do with the display and the graphics card drivers? It's as if the thing starts but I do not see anything either because the sticky keys appears, but sees nothing else, no matter what I do. Seriously, I don't want to this junk because this is a new hard drive and I was just able to retrieve my files from my old hard drive that had epic failures as well. And I just got this new specifications I wanted as well.

  Laptop Spec:

  Compaq CQ50-115nr
  OS: Windows 7 Professional
  HARD drive: Western Digital Scorpio Blue 320 GB SATA WD3200BEVT
  Processor: AMD Turion X 2 RM-70
  Graphics card: NVIDIA GeForce 8200 M G
  Memory: 3 GB RAM

  If someone could seriously help me I would be VERY happy.

  Hello

  This isn't good news.

  --------------------

  STOP: 0XC000021A

  Can be a difficult problem to solve, and you indeed need a technical help in a real store of the computer
  (not the leeks and the glances at a BestBuy or other BigBox stores) or system manufacturer support.

  Cause

  This error occurs when a subsystem of mode user, such as WinLogon or the Client Server Run-Time Subsystem (CSRSS), irremediably compromised and security can not be guaranteed. In response, the operating system goes into kernel mode. Microsoft Windows cannot run without WinLogon or CSRSS. Therefore, it is one of the rare cases where the failure of a user mode service can stop the system.

  Incompatible system files can also cause this error. This can happen if you restored your hard disk from a backup. Some backup programs may skip restoring system files which they determine are in use.

  Solve the problem

  Run the kernel debugger is not useful in this situation because the error occurred in a user mode process.

  Resolve an error in the user-mode device driver or system, third-party application service: Because the bug 0xC000021A control occurs in a user mode process, the most common culprits are third-party applications. If the error occurred after the installation of the new or updated device driver or service system, third-party applications, the new software should be removed or disabled. Contact the manufacturer of the software on a possible update.

  If the error occurs during the system startup, restart your computer, and then press F8 to character-based menu that displays the choice of operating system. In the Windows Advanced Options menu that results, select the last known good Configuration option. This option is most effective when a pilot or a service is added at a time. If the error is not resolved, try to manually remove the offending software. If the system partition is formatted with the (FAT) file allocation table, use a MS-DOS boot disk to access the hard disk of the computer. If the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or remove the defective software. If the defective software is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file. If a room newly installed if material is suspected, remove it to see if that fixes the problem.

  Try running the emergency recovery disk (ERD) and allow the system to repair any errors that it detects.

  Solve a problem of file system do not match: If you have recently restored your hard disk from a backup, check if there is an updated version of the backup/restore program available from the manufacturer. Make sure that the latest Windows Service Pack is installed.

  STOP: 0XC000021A<-- read="" this="">
  * 1314.html http://www.faultwire.com/solutions-fatal_error/Status-System-Process-terminated-0xC000021A-

  -----------------------------------------------------------------------

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------

  It's my generic bluescreen convenience store - you can try Mode safe mode as suggested in article
  above - repeatedly press F8 that you start. Disks of Vista are probably necessary - if you do not try to repair it, you can borrow a friends because they are not protected against copying. You can also buy the physical disks
  good system machine cheap that you already own Windows (you have to reinstall them if)
  required). You can also repair disks on another computer.

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  Displays information on all the "crash" of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  You can try a system restore to a point before the problem started when one exists.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates cbs.log Windows Vista (and Windows 7)
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using the methods above
  It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  Startup Options recovery or Windows 7 disk repair

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Navto link that goes directly to the (e-mail and password) login screen

  Is there a way to show the login screen (where he asks the email and password - direct payment) a Collection or an Article? Using Navto for example?

  It is not supported at the moment. As we enter 2016 we seek to provide more / different ways to trigger the login screen and your suggestion is an option.

  Neil

• I forgot my password and the login screen. __

  I forgot my administrator password at the logon screen, and now I have been locked. Please could you answer in simple terms as I am a novice.

  Thank you for your time.

  Vee2

  Hi Malkaleah

  Thank you for answer you.

  I don't have the vista installation or recovery disk. I already tried downloading but no luck, I'm afraid. It seems that I have to get it repaired.

  I thank very you much for your time.

  Vee2

• WIN8 - no desktop, black screen with the mouse pointer. Manager tasks and the login screen work.

  As usual I left my computer and after a few minutes, he fell asleep. Next morning, I had moved to the mouse, computer wakes, but I got a black screen with the mouse pointer. I hit CTRL + Alt + Delete and screen with Task Manager option appeared. I stop computer and rebooted. Welcome screen and logon is displayed. After you enter the password and click on submit that the screen becomes black with only the pointer visible mouse. I don't have not installed anything recently. Can you help me find my office?

  OK, I had the same problem. I thought that if you have a pointer and can launch Manager tasks and all programs through its file > new task, then the hull works correctly. No office and no taskbar mean that something is wrong with explorer.exe. Now, he has corrupted not necessarily, may not properly launched.

  Here's what I did:

  1. I opened the Task Manager, the Details tab

  2. I killed all explorer.exe on the list

  3. just to be safe, I also tried to kill dwm.exe but it will be may not be necessary (it never goes away)

  4. I started the new instance of explorer.exe via file > run

  And voila, I had the desktop and the taskbar.

  It will be useful.

• I have a copy of Halo 2 for Windows Vista disc and the login screen keeps telling me 'No product valid key'

  I bought a copy of Halo 2 for Windows Vista drive during the Christmas holidays and after that I installed the game, valid and registered the product key with the installation program, I load the game to connect to Games for Windows Live and he informs me that "your product key invalid. It seems that through my research on the Internet, I have to request a new key to use my game. I called Microsoft Technical Support, and told me to come here to get answers on how to get a new product key. Apparently Microsoft Engineers could give me a new key from what the woman for Microsoft said.
  EDIT: I received a reference number for Microsoft colleagues to use to search for my problem:
  121229016843033

  Hello

  Thanks for posting your question in the Microsoft Community!

  We have a dedicated team that leans on issues with Halo 2 for Vista.

  You can post the question here:

  http://forums.haloonwindowsvista.com/forums/

  You can also refer to:

  Solve problems with activation for Microsoft games problems and mapping programs.

  http://support.Microsoft.com/kb/960480

  "Invalid product key" error in Microsoft Games, MapPoint, or Streets & Trips.

  http://support.Microsoft.com/kb/812467

  Support for the Microsoft Product Activation issues.

  http://support.Microsoft.com/GP/cu_sc_prodact_master

  Support for common problems of PC games.

  http://support.Microsoft.com/ph/7745

  I hope this helps. Please let us know if you need help.

• Adobe Creative cloud loads and opens an empty window, no apps appear and no login screen appears, do I have to reinstall this application by invitation again.

  

  uninstall your cc, Creative Cloud desktop application help | Uninstall the creative desktop application Cloud

  clean through the use of the Adobe Creative Cloud cleaning tool to solve installation problems

  and reinstall apps download Adobe Creative Cloud | CC free trial Adobe

• How to make a login screen forget (connection user names)?

  In facebook and yahoo login screens, I find a lot (misspelled) names stored in a drop-down menu to choose a user name
  I want to delete some entries in this menu drop-down

  Follow these steps to delete the recorded data (form) in a drop-down list:

  1. Click on the (empty) input field on the web page to open the drop-down list
  2. Select an entry in the drop-down list with the mouse or the cursor key
     do not click with the mouse or press the Enter key
  3. Press the DELETE key (on a Mac: shift + del) to delete the highlighted entry

• Suddenly blocked on my home Windows Vista login screen. Does not recognize my password.

  I have Windows Vista and last night, while "standby mode", my laptop started a search of self-checking on the MS Dos operating system disk.  When I went to use my laptop, I interrupted the search and then asked if I wanted to take.  Have no real choice to exit the screen MS-DOS - other than to say Yes (because I'm not a techie) I decided to resume.  The search is over and my login screen comes on then.  At this point, I typed my password and now it does not recognise my password!

  We moved house just across the (very rural) Australia, so my registry key is in transit with the rest of my furniture.  Internet ADSL not yet connected to the House.  With the help of her husband's WIFI account.  What should I do to restart my laptop without having to erase all the information on my hard drive?  Is this possible?  Or I'm screwed?

  Hello

  This is the information from microsoft on you assist on passwords

  http://support.Microsoft.com/kb/940765

  except that we cannot help you

  read this microsoft's policy NOT to provide assistance to crack passwords:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/keeping-passwords-secure-Microsoft-policy-on/a5839e41-b80e-48c9-9d46-414bc8a8d9d4

• gmail login screen is wrong and does not accept my password. URL is just. Help!

  I'm on an iMac, OS 10.9.5, Firefox 37.0.2. When I either (1) click on the link of the site Google gmail or (2) enter the url for gmail, I get a login screen that demand only my username and then allows me by clicking next. In the next screen, asked me my password. When I enter my password, the screen refreshes, but presents the same screen once again with empty fields. This is not the case if I use Safari. Everything looks / acts directly in Safari. I almost never use Safari, please do not start!

  Well, it took some time and a ton of detective, but the problem is solved. You were good cor - el, running the safe mode it does work right. Then I just disabled all extensions and add them one at a time until one of them broke it again. The culprit is looking to disconnect. I even deleted and downloaded again hoping that there is a version mismatch, but no go. GRRRRRRRR. I'm going to their message and let them know what happened.

• Cannot focus Skype name and password in the login screen

  I use Skype for a long time now and used the automatic connection whenever I start my computer. Today, I accidentally disconnected from Skype. Now, I can focus my Skype name and password in the login screen. I'm having the same problem with fields in Internet Explorer 11. Does anyone know a solution to this problem? I use Windows 7 Professional.

  For me, that did the trick.
  http://community.Skype.com/T5/Windows-desktop-client/Skype-won-t-sign-in-can-t-enter-password/m-p/41...

• I did an upgrade and now can't get past login screen

  I did an update of my Macbook Pro, non-unibody, running 10.8. ? by using the software update page.  It seemed it wasn't minor corrections to the drivers, but the Mavericks jump or what.

  Everything seems to work well and he did it again to the login screen.  Now it makes a loop on the login screen.  When I enter my login, it seems, it tries to connect but just returns to the login screen and my avatar.  If I enter an incorrect password, it is as it should be and shakes the password box, but when I enter the correct pass it's all gray, then black, then loops back to the login screen and my avatar.

  Help please?

  Bruce

  It would be useful that you have indicated the EXACT model/year of yoyr MBP.

  Reset the SMC and the NVRAM:

  https://support.Apple.com/en-us/HT201295

  https://support.Apple.com/en-us/HT204063

  Try a safe boot:

  https://support.Apple.com/en-us/HT201262

  Any change?

  Ciao.

• My iMac cursor is stuck in the upper left corner of the login screen and I can't move it and now I can't use my iMac. What can I do? My iMac is a 27-inch 2014 release (one thin without retina display) and uses the keyboard and wireless mouse.

  My iMac cursor is stuck in the upper left corner of the login screen and I can't move it and now I can't use my iMac. What can I do? My iMac is a 27-inch 2014 release (one thin without retina display) and uses the keyboard and wireless mouse. It runs OSX Mountain Lion (not sure which version) and is a model 27 inches.

  have you tried to change the batteries in the mouse?

• Web page does not display the toolbar or dashboard and can not resize screen

  I'm unable to decrease the size of the screen when you use the web to display the toolbar tool and dashboard.  I went through different places to try to find a correction, but I can't find what I did accidentally or what the computer did to cause this problem and how to fix it.  Thank you for your help.

  Hi Nancydo,

  What application are you when you mention that you "use the web" and can not see the dashboard and toolbar?

  If you use Safari, the menu bar, are you able to click View > actual size?   Otherwise try file > close all windows in Safari.

  Have you restarted the computer?  Many times this will reset all default settings, including the sizes of windows.

  Also, check system preferences > display and make sure that the option "by default to display" is selected for the resolution.

  The resources below will provide additional information on the preferences of the system in general and the display options of Safari in particular.  Your profile says you are using OS X Lion.  These resources are for OS X Lion of the mountains, but they are very similar.

  On the display of system preferences pane
  https://support.Apple.com/en-us/HT202532

  The basics of the Mac: Safari 6 in OS X Lion mountain
  https://support.Apple.com/en-us/HT202525

  Have a great day!

• I get the windows login screen and I do not know the password for administrators

  I accidentally deleted my account and when the computer starts and I get the windows login screen and I do not know the administrators password. Also how can I reinstall windows when I got a disc when I brought my laptop. Thank you, Lorraine

  Thanks for getting back to me. I sold my old laptop to my son-in-law, and he asked me to remove my name from the computer off so that my name wasn't on the screen all the time. so I deleted the profile of cook of lorraine and made one for him, but I didn't give it a password. then I realized what I had to do (I got Lorraine where time is on the bottom of the screen), but was unable to highlight to remove it without a mouse. so I plugged a mouse, but the computer does not read, then I restarted the computer. When I restarted, all I could get was the windows login screen.

  then I typed in the name son-nlaws and they said that he was kidnapped, tyoed in mine and got the same and then typed in Administrator, but did not know the password. I have since reinstalled windows. XP Professional would not install saying a file was missing, so I installed xp family and is working again. He just has to click on what edition it wants to run. Professional XP of course happen just with the display of connection... but it can use again.
  Thank you once again, Lorraine