Missing data - Performance: CPU, RAM, disk, Net

Similar Questions

• Dashbord CPU, RAM, disk, Perf missing data Net

  I'm starting a new Capacity planner. Dashboard monitor-> show missing data, there is no data with CPU, RAM, disks, pref. Net on systems with Performance data (please see attachment file), but a data collector VMware capacity Planer 2.8 has collectd it. How do I troubleshoot it? Thank you

  I would recommend that you go to the '1. Put tab in place' and change the date range for the project.  I can see your username that you are Thai and generally the data send to Thailand would contain 255 x years (thai year) instead of 201 x.

• How can I get the Guest VM CPU, Ram, disk of VMware Tools?

  Hey guys,.

  I have a question for the information of the guest OS,

  I can use the SDK to get information such as the disk i/o of vCenter,

  But I can't the CPU, Ram, disk use on the comments operating system?

  I know vmware tools can help, but I don't know how to use the web Service to obtain, please do me a favor!

  Thank you

  To get the disk usage information in the guest operating system, you get "guest.disk" property of the managed object VirtualMachine. This will give you the total capacity and free space on each disk information.

  http://www.VMware.com/support/developer/VC-SDK/visdk41pubs/ApiReference/Vim.VM.GuestInfo.DISKINFO.html

  For the processor and memory, you can extract the properties "summary.quickStats.overallCpuUsage" and "summary.quickStats.guestMemoryUsage" of the managed object VirtualMachine.

  http://www.VMware.com/support/developer/VC-SDK/visdk41pubs/ApiReference/Vim.VM.summary.QuickStats.html

  I hope this helps!

  Neha

• Exchange on Vmware performance (CPU/RAM/IO)

  Hello

  I currently looking to migrate an exchange Server 2003 to a vmware.  So far, all of the items found were based on architecture using a SAN storage.

  Our exchange server currently has about 250-300 mailboxes but lets say that the solution must support at least 500 mailboxes.  We do not expect to use a SAN or a type of external storage for now.

  I want to know is if, in terms of performance and above all i/o, this solution is possible.   I found the article stating that it is y eraf without major differences in performance between a vmware and a physical server, but these comparisons are, as already said, always based on a vmware server using a San.  Y at - it an article or information about a solution using only the local disks of Vmware server?

  Thank you

  If you use a physical right now box without any performance problem, then your disk susbsystem is fast enough. There is a document of scaling to Micrososoft Exchange you can use to calculate your IOPS drive / s required. You can then create your susbsystem of disk based on that, assuming a SAS 15 k disk gives you 150IOPS. A 6 disks in RAID 5 will give you 600 IOPS / s, a disc set 2 in RAID-10 for newspapers will give you 150 IOPS / s.

  VMware adds a small overhead in terms of disk IO (perhaps 5%)

• Vs CPU Ram graphic card upgrade for Mac pro performance?

  Just after the crossroads to aboard the cloud to Adobe and seeks help on CPU Ram vs graphics card GPU.

  Material:

  • MAC Pro (early 2009) 4.1 2.26 Ghzdual core 8, 23 grams (5 x 4 g sticks and sticks of 3 x 1 G), 4 x 1 TB 7200 RPM int. HD (1 scratch drive), (no windows don't things here)
  • Graphics card Ge Force GT120 Machine has 64-bit capability, but normally starts in 32- bit due to old still used 32-bit apps.
  • Watch CS6 AE activity monitor uses all 16 son, works in 64 bitsand seizes about 10 Gig of ram to operate in.

  Software:

  • Running OS x 10.6.8. (Snow leopard) with all updates.
  • All major video applications: creative cloud (also have studio FCP 3 installed but just move to Adobe now on video works)

  I really like this AE & body use all threads, made in the background (which results in NO crashes (so far)) because my old 120 GT video card apparently is more stifling that it worked in FX in FCP 7 & 4 Motion.

  1. Q - can someone point me in the direction of how Adobe got the device to use all the cores and threads and run it in 64-bit, but starts in 32 bit?

  In terms of performance, (rendered in particular) I know I should go to the Apple/ATI 5870 graphics card, but as a veterinarian of fixed-income securities disabled, $450 is hard to find. I evaluated cards flashes, including those of macvidcards on ebay, but for used cards which are flashed, it gives me pause, especially when they are about the same price as the new price of 5870.

  So I am struggling with trying to figure out that the best shot for the less $$$, where the issue of the title.

  1. Is it more effective for video FX works to add CPU ram or (gulp) to upgrade the video card to 5870 card?

  Example: I can add sticks of 3 x 4 G in place and place existing 3 x 1 G sticks of ram for less than $200 CPU. A new 5870 card is $ 450 Apple. Approach that annoys me that most make speed plant put VFX work in AE CS6 or P Pro CS6?

  Sorry, I'm more than a little fuzzy on this, but hoping a kind soul will lead the way.

  Ken

  For After Effects, more RAM is better. For Premiere Pro, an improved GPU is more important. In addition, you might consider spending money even on an SSD, which is beneficial for both (for caches).

  See this page for more information on material for Premiere Pro and Adobe After Effects: http://adobe.ly/pRYOuk

• variable sharing, missing data, the timestamp even for two consecutively given

  Hello

  I have a problem with missing data when I read a published network shared variable.

  Host VI:

  In a host of VI on my laptop (HP with Windows XP Prof.) I write data to the shared Variable 'data '. Between two consecutively write operations is a minimum milliseconds of wait time. I use it because I want to make sure that the time stamp of each new value of data is different then a preview (variables shared the resolution is 1 ms)

  VI target:

  the VI target cRIO-9012 bed only of new data in the way that it compares the timestamp of a new value with the time stamp of the last value on a device in real time.

  Problem:

  rarely, I'm missing a data point (sometimes everything works fine for several hours, transfer thousands of data correctly above all of a sudden failure occurs). With a workaround, I'm able to catch the missing data. I discovered that the missing data have the timestamp exactly the same, then the last point of data read, is so ignored in my data 'legal '.

  To summarize, the missed value is written to the variable shared host, but ignores the target because its timestamp is wrong, respectively the same as the last value, despite the host waits for a minimum of 10 milliseconds each time before writing a new value.

  Note:

  The shared Variable is hosted on the laptop and configured using buffering.

  The example is simple only to display the function of principle, in real time, I also use a handshake and I guarantee that there is no sub - positive and negative.

  Simplified example:

  

  

  Question:

  Anyone has an idea why two consecutively data can have the same timestamp?

  Where timestamping (evil) Finally comes (System?)?

  What would be a possible solution (for the moment with shared Variables)?

  -> I tried to work around the problem with the clusters where each data gets a unique ID. It works but it is slower that comparing the timestamps and I could get performance problems.

  It would change anything when I animate the shared on the RT System Variable?

  Thanks for your help

  Concerning

  Reto

  

  This problem has been resolved in LabVIEW 2010.  You can see other bugs corrections in theReadme of LabVIEW 2010.

• How to measure the performance of the disks in vcenter

  Hey guys,.

  What is the best way for me to measure the performance of the disks in vcenter? I use the iscsi SAN storage for my environment vsphere and wants to make sure that things are defeated.

  Y at - it a good way for me to measure this inside of vcenter, if what should I pay attention to the?

  Thank you

  Kevin

  Performance, Advanced tab, storage card, chart options.

  Here you can select your storage cards and view certain measures. To also have historical data (and not only in real time), you will need to change the settings of his stats in vCenter server.

  Or select a disc, and here you can see, for example the latency time.

  André

• ORA-19612: datafile 0 not restored because of missing data

  Hello
  
  I'm testing a restoration of the controlfile. The database is in archivelog mode and automatic backup is defined on IT. I did successfully a full backup and backup of database copy.
  
  To test I did the following:
  -Note the DBID
  -closing of the database
  
  -Rename the two controlfiles:
  $ mv /u02/rcat/control01.ctl /u02/rcat/control01.ctl_old
  $ mv /u02/fra/rcat/control02.ctl /u02/fra/rcat/control02.ctl_old
  
  
  When I try to restore the controlfile autobackup form I get the following error. What could be reason please?
  
  

  [rcat@oel54]$ rman target /
  
  Recovery Manager: Release 11.2.0.1.0 - Production on Fri Dec 10 00:07:41 2010
  
  Copyright (c) 1982, 2009, Oracle and/or its affiliates.  All rights reserved.
  
  connected to target database: RCAT (not mounted)
  
  RMAN> set dbid 502889862;
  
  executing command: SET DBID
  
  RMAN> restore controlfile from autobackup;
  
  Starting restore at 10-DEC-10
  allocated channel: ORA_DISK_1
  channel ORA_DISK_1: SID=19 device type=DISK
  
  recovery area destination: /u02/fra
  database name (or database unique name) used for search: RCAT
  channel ORA_DISK_1: AUTOBACKUP /u02/fra/RCAT/autobackup/2010_12_09/o1_mf_s_737336682_6j2pyv2l_.bkp found in the recovery area
  channel ORA_DISK_1: looking for AUTOBACKUP on day: 20101210
  channel ORA_DISK_1: looking for AUTOBACKUP on day: 20101209
  channel ORA_DISK_1: restoring control file from AUTOBACKUP /u02/fra/RCAT/autobackup/2010_12_09/o1_mf_s_737336682_6j2pyv2l_.bkp
  RMAN-00571: ===========================================================
  RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
  RMAN-00571: ===========================================================
  RMAN-03002: failure of restore command at 12/10/2010 00:09:55
  ORA-19870: error while restoring backup piece /u02/fra/RCAT/autobackup/2010_12_09/o1_mf_s_737336682_6j2pyv2l_.bkp
  ORA-19612: datafile 0 not restored due to missing data
  
  $ ll /u02/fra/RCAT/autobackup/2010_12_09/o1_mf_s_737336682_6j2pyv2l_.bkp
  -rw-r----- 1 oracle dba 10354688 Dec  9 23:44 /u02/fra/RCAT/autobackup/2010_12_09/o1_mf_s_737336682_6j2pyv2l_.bkp

  Thank you!

  ORA-19612: datafile 0 not restored because of missing data

  lack of data---> file may damaged from backup sets...
  so try to take backup once more and then restore.

  In addition, you must give
  RMAN > list backup of controlfile; comes from the target database not new database...

  Thank you

• Why not place the Oracle data files on local disks

  Hi, I want to ask a fundamental question.
  
  Almost any Oracle installation I've seen, data files have been placed on Mount points, disk etc..
  
  Is there a reason for this? Why no one does place for local disks oracle data files? I couldn't find the answer on the installation guide
  
  I ask this because I will install oracle (10g) on vmware and trying to decide whether to put data on the vmdk (virtual computer local disk) files...
  Is - this recommended? If not, why it is recommended to put data files to a disc of fixation for point/external etc..
  
  
  Thanks in advance

  Hello

  People store data files on separate disks
  (1) bettter performance
  (2) the data can be in a centralized storage
  (3) if the OS crashes always files are safe
  (4) configurable with raid options
  (5) hot Swapping
  (6) easily can add additional storage

  Kind regards
  Delphine K

• Point cloud with missing data and 3 sets of data

  Hello

  I'm doing a scatter diagram that has 3 sets of data in it (i.e. 3 plots on the same graph), except that 2 of my sets of data have a missing value while my third set has all the values. I end up getting 2 lines that are disconnected. I can't just remove the line containing the missing data for the 2 sets of data because since my category axis is time, my data points get shifted and no longer appear at the right time. This is the chart that I have.

  

  Thank you.

  Hi Gabrielle,.

  If there is a diagram of dispersion, the x axis is a value axis. If you have auto selected for the min and max values on this axis, the scale may change when you remove the data point, 15, 85, but the rest remains in the same position relative to the values on each axis of ordinates. What change will be , however, is the curve on which 15 85 approached a local y maximum.

  Scatterplots will always leave a gap in the line/curve of connection where there are a pair of missing data. There are two ways to close the gap.

  If the chart is an essentially linear relationship, you can use a calculated value is pair up with the lack of value x. The downside of this is that the representation of this point will be indistinguishable on the map of the other data points, measured.

  A better way would be to make two tables, one with the full data set, the other with the partial sets, but with the pair missing completely removed.

  Adjust the cards the same size and have the same scales on each axis, then just remove one of the cards except the data points, the curves connecting the data points, the x axis of ordinates and the legend showing the color and the forms used to plot each series.

  Give a graphic a transparent filling and place it in front of the other.

  Kind regards

  Barry

• Missing data calendar after MS update

  This morning, I went to check my calendar in the Palm Desktop 6.2.2 and almost everything was missing. Apparently, an update of MS ran all night.

  In my Palm OS Desktop/username/calendar folder, I see a big (1408KO) file called datebook.bak and another called DateBook.mdb.bak (1464 KB) one who would contain my missing data?

  My last Coop diary is dated 10/08/09 and I wouldn't lose all my data from this date.

  Unfortunately, the restoration of data from my Palm TX is not an option.

  I am running Vista as the underlying operating system.

  Any ideas on the recovery of my lost calendar are appreciated.

  Hello

  The DateBook.mdb.bak file that you found contain your appointments before last successful hotsync. It would be important that hotsync not you your PDA or the bak file would have overwritten with the contents of the Agenda you see in Palm Desktop right now.

  I suggest that you undergo these:

  1. Create a new user name in Palm Desktop.
  2. While in the module calendar in the new user name, click file > import.
  3. Navigate to the location of the bak file.
  4. Type * (asterisk) in the 'filename' box and press ENTER. This should indicate the contents of the directory that the bak file.
  5. Now, double-click the bak said to import it.
  6. If you're lucky, you should see your lost appointments.

  If you're unlucky ignore the following steps:

  1. Now, are you sure that the bak file really contains your lost diary, near Palm Desktop.
  2. Using windows Explorer, navigate to your username folder. Usually, it's \Documents\Palm OS Desktop\ [a derivative of your hotsync username]
  3. Rename the folder "Calendar" to something else.
  4. Open Palm Desktop and be in your correct username and in the calendar module name.
  5. Now you can import the bak file in the folder of the Agenda that had renamed you in step 3.
  6. Now you can hotsync TX, but remember that the conduct of the Agenda is set to DESKTOP REPLACED the HANDHELD computer.
  Message edited by wacre on 10/16/2009 06:35

• I upgraded my card mother cpu ram and hard drive. I reinstalled windows xp home edition has got all of the updates. After 9 latest updates download and installtion went well, I restarted the computer, I get a blue screen and the computer restarts

  I upgraded my card mother cpu ram and hard drive. I reinstalled windows xp home edition has got all of the updates. After 9 latest updates download and installtion was going well until I rebooted the computer and go to page window showing all the icons that I get a blue screen and the computer restarts its self and does not stop. How can this be corrected?

  Hi KevinRy,

  Welcome to the Microsoft Answers site!

  Unplug all external devices.

  Try to start in safe mode. If you can start in safe mode, and then do a system restore to restore the computer to an earlier point in time.

  Change the recovery settings to disable automatic reboot, if you are able to boot up to the desktop computer:

  1.	Right-click my computerand then click Properties.
  2.	Click the Advanced tab.
  3.	Under Startup and recovery, click settings to open the Startup and recovery dialog box.
  4.	Clear the automatically restart check box, and then click OK many times necessary.
  5.	Restart your computer so that the settings take effect.

  Now, when you are going to close and a fatal error occurs, you will see at least and it won't cause an automatic restart.

  Please reply back with the error message you get because it helps us to resolve the error.

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• RAM disk: is - this practice?

  By ram drive running the operating system on the ram, I mean.  With memory prices so incredibly cheap and fast ram so abundant, it seems now is a better time then ever to do so.  I thought that I could save my OS and load it to memory prior to each session.  Currently I use about 6 GB for the C drive because I loaded all possible programs on another drive.  Many people use 16 GB of ram and when it costs only about $5 per GB, sound very tempting.  1600 mhz DDR3 is very powerful, quick and cheap now.  You can use a small SSD for all your program files or just a standard Sata 7200 RPM.

  A virtual machine, you could easily test because you can put the virtual drive on the RAM disk and run the drive from there to test. I'm thinking now that it has been proposed.

  If your motherboard 1155 can take a 32 GB of RAM, then go ahead. Some will work with him, some will not. Some are limited to 16 GB (motherboard, chipset/OS no limit). Windows XP 64 or Windows 7 64 would work.
  Paging file, temporary files, etc. work well in a RAM drive. But, running more than RAM instead of a paging file works better (to a point, of course). With enough RAM, the swap file is rarely used, but required for some programs. With enough RAM, it wouldn't matter where he was.
  XP 64 is great. As long as all your drivers and things are compatible. Windows 7 on the same hardware with lots of RAM would actually probably faster. I noticed that 7 has some improvements that make it faster than XP with recent material and more RAM.
  I don't know how OSX works, but it is based on BSD, so I think that it would benefit from a RAM drive using the /swap partition.
  Current SSDS are no faster than the RAM, but they have more space (and it's still there when you stop). An operating system on a RAM disk is not really practical. Restart the updates, driver install, etc. would be necessary and after the reboot you lose install updates, so you're still stuck with a default value.
  I'm sure that someone has tried to put a Win7 installation on a RAM disk, a Google search can show you. You could probably try and make a picture for your PC with all drivers and updates and put this image on the Ramdisk to see what it looks like, but I wouldn't do it right now for a production or facility for anything other than messing around to try out it.

• How can I find and open/search the 32 GB of data that fills the disk for possible deletion?

  Using XP: I have only about 2 GB (2 000 MB) of the programs on my hard drive Go 37 and less than 3 GB of space left.

  How can I find and open/search the 32 GB of data that fills the disk for possible deletion?

  Thank you.

  * original title - full hard drive. *

  Using XP: I have only about 2 GB (2 000 MB) of the programs on my hard drive Go 37 and less than 3 GB of space left.

  How can I find and open/search the 32 GB of data that fills the disk for possible deletion?

  Thank you.

  Download and run JDiskReport.

  There are a number of things you can do to- temporarily - free up disk space.  The only real solution, however, is to get a larger hard drive.

  • You can run Disk Cleanup (start > run > cleanmgr > OK)
  • You can reduce the size allocated for the restoration of the system to about 1 GB (right click on desktop > properties > system restore > settings)
  • You can disable hibernation (if you don't use it) (right click on an empty spot on the desktop > properties > screen saver > power > Hibernate)
  • You can disable the indexing of the drive, which will also speed up your computer a bit (http://lifehacker.com/031440/turn-off-indexing-and-speed-up-windows-xp)
  • You can reduce the size of your Internet browser cache (depending on the browser that you use)
  • You can remove most of the $NTUninstallKBxxxxxx files $ following the directions here: http://windowsxp.mvps.org/Hotfix_backup.htm (read the warnings in the gray box first)

  But none of these answers you will earn really large amounts of space for very long.  The term solution time is a bigger hard drive.

  In the meantime, download and run JDiskReport, that will show you graphically what files take up more space and seem to so indicate what files to delete or uninstall applications.

• I had to reinstall XP Pro operating system. After installation do not play the HD ADECK. Tried to reinstall, but kept on getting vital missing data. Reinstall again.

  I am running XP Pro.  What respect should be reinstalled from the CD.   After the reinstallation, Harmon Kardon speakers do not work because HD ADECK cannot be properly installed.  Kept on getting vital missing data?

  Any suggestions?  Someone else's experiences loss of sound after a re - install?

  I guess you have formatted the HD?

  Therefore, you need to reinstall the relevant software for HD ADECK

  See here:

  http://www.Google.fr/search?q=HD+ADECK&ie=UTF-8&OE=UTF-8&AQ=t&RLS=org.Mozilla: en - GB:official & client = firefox-a

  Happy trawling,
  Jerry