Data Access Manager and the views HTML

Similar Questions

• Then I activated my Access Manager and put a password and so now when I go and need to tap into it he says it's the wrong

  So I activated my Access Manager and put a password and so now when I have to type in is to say that he is the only evil and wrong please help?

  So I activated my Access Manager and put a password and so now when I have to type in is to say that he is the only evil and wrong please help?

  I'm sorry. Your problem falls into the category of the polict restricted forum. Namely...

  Keep secure passwords - Microsoft strategy on move the passwords

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/keeping-passwords-secure-Microsoft-policy-on/a5839e41-b80e-48c9-9d46-414bc8a8d9d4

  Which means, we are not allowed to help users to bypass the password protection, no matter what could be the reasons.

• All my data have doubled and the lines are slightly compensation and overlapping. Unusable.

  All my data have doubled and the lines are slightly compensation and overlapping. Unusable. How to restore the distorted view course content?

  Hello Arnold,.

  A screenshot of the upper-left corner of your document could help the issue. Include as much as in the example below.

  If this section of the table does not display data "doubled and shifted", provide a second screenshot of a section of the same size, showing a sample of the data in question.

  Kind regards

  Barry

• I keep getting emails telling me that if I do not answer with my name, password, Date of birth and the country or territory my Windows Live will be Shut Down

  I keep getting emails telling me that if I do not answer with my name, password, Date of birth and the country or territory my Windows Live will be Shut Down.  The person who sends me emails is also with MSN.  Everyone knows this?  Thanks for your help.

  Thank you for visiting the Microsoft answers community.

  The question you have posted is bound using Windows Live (Messenger) and would be better suited in the Center to help Windows Live Messenger. Please visit this link to find a community that will provide the support you want.

• How to get around the Startup Manager and the black scree at startup

  tried to deactivate the boot manager of arise to stat upward by going to advance settings and put the 'the operating system display list' to zero. However, the Boot Manager always appears at the star for a few seconds and then the screen goes black and possibly windows vista starts. What can I do to work around the Boot Manager and the black screen at the star to the top? I tried the system recovery option, but it didn't work. Can someone help me?

  Thank you

  Hello

  I suggest you to see link below and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows7/change-the-default-operating-system-for-startup-multiboot

• How to interpret the data cache setting and the current value of data cache?

  How to interpret the data cache setting and the current value of data cache? We found that even, we configure a larger data cache in Essbase 2 GB for example, the current value of the data cache is always much lower. Does that indicate an activities of data at very low recovery or something else?
  
  Thanks in advance!

  Hello

  When a block is requested, Essbase searches the data for the block cache. If Essbase is the block in the cache, it is immediately accessible. If the block is not found in the cache, Essbase in the index for the appropriate block number and then uses the index of the block entry to retrieve from the data on the disk file. Retrieve a block requested in the data cache is faster and therefore improves performance.

  So as you say that its current value is much lower then % is very low, that a requested block is in the cache of Essbase data.

  Hope that respond you to the.

  Atul K

• Can not get to start remote access connection manager and the connections don't work Internet

  Original title: wired & wireless connections does not.

  I can not get the remote access connection manager to start and so no internet connection is not working, also I can't open the system restore to go back on this machine. What is this?

  I am running a Dell Studio 1735 PP31L w model number / Edition Vista Home premium.

  Hi Rick,

  1. what happens when you try to start the remote access connection manager? You receive messages or error codes?

  2. you receive error codes or restore messages when you perform the system?

  You can check the status of the following services and make sure that the services are started.

  a. Click Start and type Services in start search and press ENTER.

  b. in the services with the right button on the phone and then click Properties.

  c. under the general tab, select automatic next to startup type.

  d. under the general tab, click Start under the service status and then click apply and then click OK.

  e. Repeat steps c & d to the remote access connection manager and Remote Access Auto Connection Manager service.

  Hope this information is useful.

• Management of data access Client pulling the registry instead of Web.config settings

  I have an ASP.NET 4.0 application configured with the managed provider of ODP (32 bit) via the customer install the production. It is configured with the following text in the root web.config file:

  <oracle.manageddataaccess.client>
    <version number="4.121.1.0">
      <settings>
        <setting name="TraceLevel" value="127"/>  
        <setting name="TraceOption" value="0"/>
        <setting name="TraceFileLocation" value="c:\temp\odpnet66.trc"/>
      </settings>
      <onsConfig mode="remote"></onsConfig>
    </version>
  </oracle.manageddataaccess.client>
  

  When I look for the trace file, however, I realize that it is written to a location set to HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\ORACLE\ODP.NET\4.121.1.0.

  What needs to be done to make the provider read its settings from the web.config file?

  Additional information:

  <system.data>
      <DbProviderFactories>
      <remove invariant="Oracle.ManagedDataAccess.Client" />
      <add name="ODP.NET, Managed Driver"
           invariant="Oracle.ManagedDataAccess.Client"
           description="Oracle Data Provider for .NET, Managed Driver"
           type="Oracle.ManagedDataAccess.Client.OracleClientFactory, Oracle.ManagedDataAccess,Version=4.121.1.0, Culture=neutral, PublicKeyToken=89b483f429c47342" />
    </DbProviderFactories>
    </system.data>
  

  You probably ODP.NET, pilot managed, also installed on your machine, if the registry entry, HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\ORACLE\ODP.NET\4.121.1.0, has been created. This registry entry is not created by managed ODP.NET. Any tracing would flow from the ODP.NET, to use unmanaged driver.

  Some recommendations to try to allow managed ODP.NET tracing:

  (1) value TraceLevel 7 or reduce its value.  Managed and unmanaged trace level values are different. What are managed.

  • TraceLevel: 1 = Public API; 2 = private API; 4 = API/data network. These values can be OR ed. To enable all, set TraceLevel to 7 . Errors will be always drawn.

  (2) set the TraceFileLocation on a directory name, not the file name. Make sure that the location of the directory exists.

• Push the view, enter data, Pop store and the... How?

  Simple example...

  I need to get data from one view in the other as if a notice has been a pop up.

  for example...

  I have a baseView with a button "SELECT DATE".

  When the user clicks the button, they see dateView and they enter the date here.

  When finished selecting the date, they click OK in dateView who must bring back them to baseView passing the selected date.

  What is the best way to do it?

  -use a sharedObject to store the date and when to pick it up on base?

  -pop baseView then press OK then dateView push baseView with data?

  n ' not use a dateView but rather a popup dateEntry (as a custom alert)?

  There are several ways I could go with this, would like to know what the experts, however, suggest.

  Thank you.

  Ok. Looks like I found the answer and then some.

  Glad to know I wasn't the only one looking for something like this.

  http://remotesynthesis.com/post.cfm/passing-data-on-pop-methods-in-mobile-Flex

  and

  http://www.remotesynthesis.com/post.cfm/passing-data-across-views-in-Flex-Mobile

  Thanks RemoteSynthesis.com

• Smart Data Source Manager seen corrupt View

  Hello

  I had updated my V11.1.1 smartview just to find out that all the new versions have not been completely works flawless for me, so I decided to downgrade to V11.1.1 again.

  Since the downgrade my opinion however "Smart View Data Source Manager" is corrupted, so I can't create, edit or delete anything (illustrated: http://www.imagesup.net/?di=1613887541459). I correctly uninstalled any previous update until I installed the old version again.

  Everyone faces the same question and could probably help me to restore the correct view?

  BRGRDS,

  Daniel

  Have you tried to remove CAOptionsXML of [HKEY_CURRENT_USER\Software\Hyperion Solutions\HyperionSmartView\Options]?

  HTH-

  Jasmine.

• Access rights in the viewer Discoverer 10 g

  Hello
  
  Need help with the user accounts and previlegdes associated with user accounts.
  
  Most users access discover Viewer for a sector with the same ID and have access only to the reports, not all data in the business district.
  
  I have User ID 'abc', employing 10 people to connect with the viewer of discoverer access reports created using a specific business area.
  
  I have an another Userid "lmf' whose use 20 people to connect with the viewer discoverer and access reports created using a few other BA.
  
  Now, I want to first 10 users for only reports in read mode for access to and do not make any other change while accessing reports.
  
  What changes we need to make this happen? Is there something that we must do this in the pref.txt file and create a sort of triggers so that these restrictions may be imposed?
  
  Kind regards
  
  Anuj
  
  Published by: hicham marocainlol, March 30, 2009 15:26

  Hello
  Let me explain,
  I'm not saying that users should not share the same BA.
  I'm not saying that each person must use his own user_id, so you will not have this conflict.
  There is a way to change the GUI and to tweak it, but it will affect all users of spectator and not only a specific (like change the file pref.txt) and also it is not supported by oracle.
  If you don't want to go in this direction, you should look for customizing UIX files.

• EliteBook 8570p: ProtectTools Device Access Manager blocks the upgrade of Windows 10

  Hello

  I can't upgrade Windows 7 Pro for Windows 10.

  (Manual and automatic) installation fails because of the incompatibility of ProtectTools Security Manager (according to Microsoft). This is also described in a document that I found on the HP Web site: http://h20565.www2.hp.com/hpsc/doc/public/display?sp4ts.oid=5212912 & docId = docLocale & emr_na-c04734799... .

  Before I can uninstall ProtectTools, I need to uninstall other HP, like Device Access Manager tools...

  And this is my problem: how to uninstall Device Access manager? It is not listed under "programs and features". I tried to uninstall tools like CCleaner and Revo Unistaller, but they can't find it or the other.

  I installed the latest version of ProtectTools, via the SoftPaq Download Manager and disabled all functions of the ProtectTools, as far as I can tell.

  How do I remove subsequently ProtectTools?

  Best regards

  Wim.

  I found a way to remove it on this Web site: http://www.shouldiremoveit.com/Device-Access-Manager-for-HP-ProtectTools-9553-program.aspx

  Run: MsiExec.exe /X {55B52830-024A-443E-AF61-61E1E71AFA1B}

  It fixed for me.

• I have a problem with so-called Access Manager and I can't make it out of my computer could it please help me

  I'm unable to remove the so-called Access Manager

  Here's a FAQ on Access Manager: http://windows.microsoft.com/en-US/windows-vista/Internet-Explorer-Content-Advisor-frequently-asked-questions.

  As said t-4-2, we can not help you to override restrictions or remove or disable the program.  This is between you and the administrator of the system that was put in place.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Flash Access Manager: create the update list policy generates SERIOUS: Servlet.service () Exception

  I have created a new policy and want to broadcast its existence to our server to access the Flash, but using the list of update of political strategy-> add-> create a list updated policy, I have an error message (Note: the only parameters different when comparing the new policy to the RFA - policy.pol is the addition of the HDCP Encryption tab right to play) :

  The server encountered an internal error () that prevents to satisfy this demand. java.lang.ArrayIndexOutOfBoundsException exceptions : 2

  com.adobe.flashaccess.refimpl.userinterface.UICommunicator.createPolicyUpdateList (UICommu nicator.java:817)

  com.adobe.flashaccess.refimpl.userinterface.UICommunicator.doPost (UICommunicator.java:145)

  javax.servlet.http.HttpServlet.service(HttpServlet.java:637)

  javax.servlet.http.HttpServlet.service(HttpServlet.java:717)

  It is also registered by Tomcat:

  February 1, 2012 12:57:57 org.apache.catalina.core.StandardWrapperValve invoke

  SERIOUS: Servlet.service () for servlet UICommunicator threw the exception

  java.lang.ArrayIndexOutOfBoundsException: 2

  at com.adobe.flashaccess.refimpl.userinterface.UICommunicator.createPolicyUpdateList (UICommu nicator.java:817)

  at com.adobe.flashaccess.refimpl.userinterface.UICommunicator.doPost (UICommunicator.java:145)

  at javax.servlet.http.HttpServlet.service(HttpServlet.java:637)

  at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)

  at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter (ApplicationFilterChain.j ava: 290)

  at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)

  at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:233)

  at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191)

  at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:128)

  at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)

  at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)

  at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:286)

  at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:845)

  at org.apache.coyote.http11.Http11Protocol$ Http11ConnectionHandler.process (Http11Protocol.ja goes: 583)

  to org.apache.tomcat.util.net.JIoEndpoint$ Worker.run (JIoEndpoint.java:447)

  at java.lang.Thread.run (unknown Source)

  Here are a few screenshots with all my settings Flash of Access Manager:

  

  

  

  

  -EDIT: MORE INFO.

  I also tried to creating policy using command line tools, specifically the AdobePolicyManager.jar by using the following:

  java-jar AdobePolicyManager.jar new poltest.pol o - x w 210240 - opAnalog NO_PLAYBACK - opDigital NO_PLAYBACK

  with my flashaccesstools.properties configured. (I can reach so useful)

  The policy is created, but the errors of content about authentication during playback.

  Content plays successfully when encrypting using the default ad - policy.pol, but new policies do not seem to be recognized by FAX3, and I can't get them to be recognized correctly.

  Post edited by: Derek J Entringer

  This is now solved. Policies were properly created, and the content was being encryption properly.

  The problem occurred because the Protection of output type was not matching what has been implemented within our Treaty custom authentication backend.

• Display the date current system and the time in a form

  Hello experts around the world.
  
  I have this little minor challenge I'm having trouble in the corners.
  
  I have a form and I want to display the date current system and time so when I save the form his record with the date displayed.
  
  I tried sysdate, & sysdate and & sysdate. in the default part with static text with memories of State meetings.
  
  So any help or suggestion would be a great help :)
  
  Thank you

  Hi kevin

  write the script in the HTML header below.

  It will give at once, you can set this variable in the variable text box element.

  or else check the below link in java script

  http://www.McFedries.com/JavaScript/DateTime.asp

  see you soon,
  Shan