Data block

Similar Questions

• Satellite Pro U200 - incorrect checksum error (ROM (data block))

  Hello when I run my Satellite Pro U200 Toahiba
  I have an error

  Incorrect checksum (ROM (data block))
  PRESS ANY KEY TO CONTINUES.

  Pleas Help

  The most common cause for the mistakes of "Bad Checksum" is the CMOS battery on the motherboard failure.
  The battery may be empty or could have been dead. But it's really not easy to say exactly what's wrong!

  Therefore, I recommend first to access the BIOS and set it to default settings. Don t forget to save the changes.
  More you must connect to the AC adapter and should leave it plugged during on 24 hours to recharge the battery CMOS.

  Maybe it helps to get rid of this error message.
  If it doesn't help, then you should contact a technician for laptop!

• Regarding the authorized request property if the data block is the database no.

  I'm now a project located on Oracle Forms 10g.

  There is a DataBlock with certain properties such as

  1 block of data in the databases: No.
  2 query allowed: Yes
  3 interrogate the Data Source Type: table
  4 insert authorized: Yes
  5 update allowed: Yes
  6. Remove allowed: Yes

  If the DataBlock is not database data block are then properties no. 2 to 6 relevent?
  I think these properties must be set to NO and the query data Source Type must be None.
  Can someone help me please.

  Yes... The block of database property must be "NO"... I made the mistake of typo... You can also change other properties... No problem in that

• Verizon Palm Centro with data block incoming picture message issue

  My wife & I have Verizon Palm Centro.  We have a data block on the account that we only wanted to fuse our PDA with our phone to carry less devices.  Recently, someone she knew sent him a picture message.  She never received as to be expected since we have a block of data.  BUT now his phone constantly freezes and will not allow her to put it to sleep.  I noticed that when he behaved in this way, there are two icons triangle above the antenna meter chart, which mean the transfer of data (they go gray and then become green and grey).
   
  To try to remedy the situation, I did a soft reset.  One more question.  Did a Hard Reset.  One more question.  She took it to the Verizon store.  They said he had no trouble finding.  Has continued to be a problem.  Then I saw on the Palm site there is an upgrade of the operating system.  Done (which includes some reset hard).  One more question.  The next day, my wife returned to the Verizon store.  This time, they saw the issue.  They said there was nothing they could do, but give him a new phone.  She brings the phone home and same problem.  I then HotSync had to get all its data back on the phone.
   
  Now, I get a little concerned, as it has been 5 days since the beginning of the question.  As this problem happening my wife tells me of the picture message sent him these days ago.  While it's a data connection, I opened the message Centre and there is an icon of mail with arrows to move through it stay at 0%.  When that disappears, the triangle icons disappear from the graph of power antenna.
   
  I call the technical assistance.  The person is very and said we should would never block because someone should only get this phone for data.  I explained that we wanted only to combine devices.  I explained the picture message. blah blah blah.  He then says that it is from a software on the phone.  Takes me through a bunch of read him information.  All the time that he does not believe me that it's something to do with the unrecovered MMS (which we do not want yet).  In any case, it is more than an hour on the phone with the guy.  It had Palm on instant message and at the back of their hand for me.  He then tells me to do a Hard Reset.  I told her that I've already done a lot and it was not the solution.  I had to do because it could it resolve, he said.  I did, and for the next few minutes, it doesn't lock upwards with the icons.  That is why he said it was fixed and it was something we did on the phone.  Then, he wanted to end the call.  As he was not driving, I ended the call.
   
  Well..................  I did a restore complete everything on the phone my wife, starting by a Safe Hotsync for his calendar, list of tasks and addresses.  Then I restored one - by - one all of his requests including its Documents to go files, etc..  It took another hour +.  The phone worked ok for some time and now 1 day later... The same thing is happening again.
   
  Is there a way to stop this madness?  Verizon can't kill what is trying to get out?  Is there something in the Palm that can kill the message?  Any help would be great.

  PS Our phones have the same exact software on them with the same applications, provided with the phone and the modules provided by Verizon/Palm.  We have the same ringtones.  We have the same content of music on our MicroSD cards.  The only thing different is photos we have taken.  My phone doesn't have this problem.  The only difference is that picture stupid someone message.  Hopefully, it's not mine.  Thanks again.

  Thank you very much for the reply.  After that I posted this, I contacted Verizon Technical Support.  It seems that the problem was exactly what I said it was.  There was a picture message which was held by the data block, but still somehow try to get on the phone.  I spent some time with a very competent tech person who took the time to solve the problems with me (and down tell me).  We tried to remove the block to see if the message would come through.  Still problem.  We went through all kinds of things to reprogram and realign the phone to the Verizon network.  Still problem.  Then he looked again and found a setting in the application of message for MMS messages fired automatically.  When I disabled this setting, bam message came (no picture because of the block) and the problem stopped.  I was very pleased with the help and the phone my wife is no problem.

  P.S., while my wife & I have the same contacts this is a manual process to keep the same.  We have different identifiers of Palm.  Our devices are different.  The only reason why I mentioned in my original post how we hae the inforamtion even had to point out that his phone was screwing and mine was not (with essentially the same content).  Once again, thank you.  G

  Message relates to: Centro (Verizon)

• The values for the items in the list of the other data blocks appear not when running.

  Hello

  I have a new problem again.

  I'm a new form in which there is about 8 blocks. All blocks have their tables in the oracle database.

  Each block has 18 columns with the same column and the column names. But the values in these columns are different and do not match.

  The problem is while I sign the form, it fills only the first data block. Other blocks do not display or fill in the values.

  I can't create a master relationship because all column values are different.

  How show or fill in the values of all the tables?

  Please help me. Thank you.

  Hello

  If your form has really separated tables, then you can simply use a trigger key-exeqry at the level of forms of travel in each block in turn and perform a built-in query execute, eventually returned the starting block.

  That is to say

  go_block('..');

  execute_query;

  go_block('..');

  execute_query;

  etc.

  go_item (...);

  In this case, you would use the block where clause to constrain each table for the game proper.

  If, however, the database has no relationship between the tables, but the content of the data has a correlation, then you could create a relationship of forms manually.

  see you soon

  Stem

• ROWID and data block

  Hello
  I'm using Orace 11 g R2 on Oracle Linux 64-bit 5.6
  I have a simple question. ROWID contains: number of data, the number of file data object, * block * number, line number.
  When he says data block, it doesn't mean Oracle this block or block of disk?
  Thank you all.
  
  Published by: Laus on June 3, 2013 04:16

  Oracle block. The doc for dbms_rowid makes this clear, http://docs.oracle.com/cd/E11882_01/appdev.112/e25788/d_rowid.htm#CIHDGIGD
  --
  John Watson
  Oracle Certified Master s/n
  http://skillbuilders.com

• ORA-01578: ORACLE corrupt data block

  DERA Guru,
  
  In the SAP, I have following error in the Oracle database
  SQL error in the database when you access a table
  
  
  "Database of text of the error...:" ORA-01578: corrupted ORACLE data block (record #).
  38, block # 72576) ORA-01110: data file 38:
  ' K:\ORACLE\D01\SAPDATA4\D01_12\D01. "DATA12 '."
  How can I solve it. Please guide me...
  
  Thank you for your help and advice...

  Take a look at the log of alerts? He could tell you about the type of the damaged object...
  otherwise, run this query:
  Select *.
  from dba_extents
  where file_id = 38
  and 72576 between block_id and block_id + blocks - 1;

• Data block corruption?

  Hi all
  
  OraDB 11.2.0.1
  
  Today, we just met this error in oue PROD db. It is the first time that we have achieved this.

  Caused by: java.sql.SQLException: ORA-01578: ORACLE data block corrupted (file #
  5, block # 136230)
  ORA-01110: data file 5: 'C:\ORACLE\ORADATA\ORAJVB7\DATATS01.DBF'
  ORA-26040: Data block was loaded using the NOLOGGING option

  My boss ask you what are the usual cause of this issue.
  I just said, fluctuations in the power supply and the drive is already old and fragile.
  It presents a valid explanation?
  
  How do you handle this issue?
  The FF is also acceptable?
  
  startup nomount
  recover the database.
  
  
  Thank you very much
  
  Edited by: KinsaKaUy? on July 18, 2012 20:19

  KinsaKaUy? wrote:
  Thank you...

  I just thought that 11.2.0.1 is now the high-tech modern database and it has a utility to repair the damaged data. Something like fix DBMS exec (Corrupt block). And presto! corruption will be gone.
  Why is that the process is still primitive :(

  Corruption would be gone on that the storage on which the Oracle block is sitting, would be free of him. If you have a defective material, can not expect Oracle to heal for you, right?

  Aman...

• Data block size

  Hi all
  
  I know the data block size is 8 bytes, where n is the number of cells that exist for this combination of dense dimensions. My question is why is a multiplication of n * 8, IE why particularly n is multiplied by 8 not with anything else?
  
  Thanks in advance.
  
  Kind regards
  Stéphane

  This must be linked to the maximum amount of data that can store 8 bytes.
  http://wiki.answers.com/Q/Largest_number_stored_as_a_byte
  After a bit of google search, you can see that 8 bytes are large enough to contain the largest type of digital data available.

  See you soon,.
  Alp

• How to count the number of elements in a data block

  Hi all
  How to count the number of elements in a particular data block oracle Forms 10g.
  If it's a text_item or the display_item or the list_item etc is there any method to do this.
  
  Please answer...

  get the first element with GET_BLCOK_PROPERTY(..., FIRST_ITEM);
  loop until GET_ITEM_PROPERTY(..., NEXTITEM) is null
  count on in the loop.

• Inserting data block to the SPOUT making varchar2 (150) column with currupted

  Hi Chris,
  
  We are facing a problem with the insertion of bulk data on the BEAK in a table
  
  Insert data block to the SPOUT making varchar2 (150) column in a table with the corrupted values.
  column of first row inserted correct, but the second line, columns in the new row as null
  
  We had trace OIC just before the insertion, these values are correctly coming
  But integration doesn't work properly
  
  Could you suggest, what could be the problem, we use the OIC during the client/server connection, this problem is for a direct connection also

  In general, please do not post questions forum for questions where you have already opened a SR. This translates simply by duplication of efforts and is unlikely to lead to a faster resolution. If the problem is serious or complex that you opened a SR, it is very likely that anyone in the forum (including me) will have an instant response and it will probably ask a lot of questions and do a lot of research that is already made by Oracle support.

  Thank you for your understanding and your cooperation.

  Chris

• Question about data block address (DBA)

  Hi all
  
  The disk block has its own s/n (data block address) and when it is read into the buffer cache, he has a memory address (I'm just guessing).
  If my assumption is correct, the DBA and memory address have any relationship, i.e. a mechinsm of mapping?
  
  Best regards
  Leon

  Laughing out loud
  There is NO relationship between the address of a block on the disk (the file / block number) and address when it is in memory. Keep in mind, first, that there could be several copies a block of memory.

  By 'relationship', I mean that you can not say "because this block disk address is X the memory address is there.
  There is a relationship between the address block and 'cache buffers chain' that the block will be associated with - and that's how Oracle knows how to find the block of memory, he knows what channel it should be, so he goes to the beginning of the relevant channel and starts walking he controls each link in the chain for the right version of the block on the right. (The string is a list of related entries of x$ bh, of course, not a linked list of actual copies of blocks).

  Concerning
  Jonathan Lewis

• Size of data block

  Storage of Data Type: dynamic Clac
  Store
  Label only
  Store & Clack Dynamics
  Shared data
  
  As number of block in Essbase is calculated by multiplying the number of members in Sparse dimension and number of cells in each block is calculated by multiplying the number of dense dimension members
  
  
  My question is that
  
  The effects of type of data storage because of the number of cells in each (Dense) block of data and block (Sparse)
  
  For example
  A sparse dimension a total 60 members but off them only 40 members have property stored for the data block will be created on the basis of 40 or 60 members?

  Blocks will be for members only, where the data is stored, if you think about why store something that does not exist.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Workload file data block

  Hello.
  
  I want to load the CAP (binary code) file to map java (GP 2.1.1).
  
  data block for the file load means code binary file CAP, right?
  
  and im wondering how we change our structure for BER - TLV?
  
  Binay cescodessont [4 b 50 03 04 14 00 08 00 08 00 CF 56 86 3D 00 00 00 00 00 00 00 00...]
  
  E8 80 00 00 C4 * 82 0A 4B 29 FA * 50 03 04 14 00 08 00 08 00... (binary code)...
  
  I discovered the "82" tag means having length with 2 bytes more (0x0A29 for now)
  
  I must add to load the block structure of data file something else?
  
  
  Thank you

  845467 wrote: data block for the file load means code binary file CAP, right?

  As far as I know, no, not all cap file. You must find in the PAC file as 'header.cap', 'directory.cap' and other components and download only. These components are described in the FRENCH_TRAVELLER_64 specification. You must download in the order defined in the specification.

  845467 wrote: 80 E8 00 00 82 C4 FA 0a 29 50 4 b 03 04 14 00 08 00 08 00... (binary code)...

  APDU should look something like this
  E8 80 00 00 C4 82 XX XX 01 02 ZZ ZZ DATA YY YY FA...

  XX XX - length of tag C4

  YY YY 01 - the name and length of the component header.cap

  02 ZZ ZZ - the name and length of the component directory.cap

  Note, debug.cap, and descriptor.cap are optional. In the case of JCOP cards they are downloaded on C4 tag.

• I have a trigger to post to the data block request...

  I have a trigger to post to the data block request...

  BEGIN
       IF :SECTION IS NOT NULL THEN
            SELECT DESCRIPTION INTO :BOROUGH FROM C_LOV_BOROUGH WHERE :SECTION = SECTION;
       END IF;
  END;

  Table C_LOV_BOROUGH has many lines
  
  When I scroll quickly after querying data...
  I get the error ORA-01403, after than scrolling up and down... it disappears... someone can help?

  Use a slider instead of direct SQL SELECT as if you can't find all the lines, would not raise an exception, or use an exception handler to handle all exceptions silk-screened - found.

  DECLARE
   CURSOR c_get_desc IS
     SELECT DESCRIPTION
       FROM C_LOV_BOROUGH
     WHERE SECTION = :SECTION;
  BEGIN
  IF :SECTION IS NOT NULL THEN
    OPEN c_get_desc;
    FETCH c_get_desc INTO :BOROUGH;
    CLOSE c_get_desc;
  END IF;
  END;
  

  Second method:

  BEGIN
    IF :SECTION IS NOT NULL THEN
      SELECT DESCRIPTION INTO :BOROUGH
        FROM C_LOV_BOROUGH
     WHERE SECTION = :SECTION;
    END IF;
  EXCEPTION
    WHEN NO_DATA_FOUND THEN NULL;
  END;
  

  Cursor is safer than direct SELECT SELECT because maybe meet TOO_MANY_ROWS exceptions too... but if you use the slider, he realized the first found line extraction and populate the BOROUGH and if it does not find anything, it won't throw an exception.