Data block corruption?

Similar Questions

• Corrupted ORACLE data block

  Hello
  What can cause a block of data that is corrupted in the SYSAUX01. Data DBF file?
  
  ORA-01578: ORACLE data block corrupted (file # ORA - 01578: ORACLE data block corrupted (file # 2, block # 98776))
  ORA-01110: data file 2: ' D:\ORADATA\DWHGROUP\SYSAUX01. DBF'
  ORA-26040: data block has been loaded using the NOLOGGING option
  (*, block #) *.
  
  
  What my options?
  It is possible to use for the SYSAUX DBMS_REPAIR?

  Hello

  This problem comes if
  (1) you open your database from backup
  (2) you restore your primary backup database.

  This problem is caused by
  (1) that you have completed your table / index with the nologging option.

  Option you have
  (1) check if you have the main database in place. If so rebuild the object with the logging option (the best option)
  (2) If you do not have primary database and then check what is corrupt table or index. If index rebuild and table then more information would be necessary, and also, this does not guarantee that you would be able to recover.

  Concerning
  Anurag Tibrewal

• ORA-01578: ORACLE corrupt data block

  DERA Guru,
  
  In the SAP, I have following error in the Oracle database
  SQL error in the database when you access a table
  
  
  "Database of text of the error...:" ORA-01578: corrupted ORACLE data block (record #).
  38, block # 72576) ORA-01110: data file 38:
  ' K:\ORACLE\D01\SAPDATA4\D01_12\D01. "DATA12 '."
  How can I solve it. Please guide me...
  
  Thank you for your help and advice...

  Take a look at the log of alerts? He could tell you about the type of the damaged object...
  otherwise, run this query:
  Select *.
  from dba_extents
  where file_id = 38
  and 72576 between block_id and block_id + blocks - 1;

• script/steps to corrupt data blocks

  Please give me some script/not to corrupt data blocks (not the data files).
  I need to check for the recovery test.
  
  Thank you

  http://www.oracleflash.com/9/How-to-perform-block-media-recovery-using-RMAN.html

• Block corruption on the physical Standby database

  Hi all

  Operating system: HP Unix

  DB: 10.2.0.4

  We are facing corruption block on our database of physical intelligence. The same has been detected using commands below and several blocks were found to be corrupt.

  RMAN > backup validate check the logic of database;

  SQL > select * from v$ database_block_corruption

  As it is a basic data watch no backup is present, pulling the command below did not help

  RMAN > list of corruption block restoration;

  I think taking the incremental backup of the PR and the same application on DR, y at - it another way to eliminate corruption said?

  Kind regards

  Sphinx

  You can check below link if corruption block results nologging, there is a thread already with the question.

  Block corruption on the standby database

  10.5.2 steps of recovery for databases physical standby

  Data protection scenarios

• Block corruption

  Hello
  
  I find under block corrupted in my alert log.
  
  ORA-01578: block ORACLE (corrupted file # 219, block # 162129) data
  
  This block could you please let me know the query for which damaged segment.
  
  Thanks in advance
  Aman

  This query will help you to identify the segment.

  select tablespace_name, segment_type, owner, segment_name
  from dba_extents
  where file_id = 219
  and 162129 between block_id and block_id + blocks -1;
  

• Inserting data block to the SPOUT making varchar2 (150) column with currupted

  Hi Chris,
  
  We are facing a problem with the insertion of bulk data on the BEAK in a table
  
  Insert data block to the SPOUT making varchar2 (150) column in a table with the corrupted values.
  column of first row inserted correct, but the second line, columns in the new row as null
  
  We had trace OIC just before the insertion, these values are correctly coming
  But integration doesn't work properly
  
  Could you suggest, what could be the problem, we use the OIC during the client/server connection, this problem is for a direct connection also

  In general, please do not post questions forum for questions where you have already opened a SR. This translates simply by duplication of efforts and is unlikely to lead to a faster resolution. If the problem is serious or complex that you opened a SR, it is very likely that anyone in the forum (including me) will have an instant response and it will probably ask a lot of questions and do a lot of research that is already made by Oracle support.

  Thank you for your understanding and your cooperation.

  Chris

• Satellite Pro U200 - incorrect checksum error (ROM (data block))

  Hello when I run my Satellite Pro U200 Toahiba
  I have an error

  Incorrect checksum (ROM (data block))
  PRESS ANY KEY TO CONTINUES.

  Pleas Help

  The most common cause for the mistakes of "Bad Checksum" is the CMOS battery on the motherboard failure.
  The battery may be empty or could have been dead. But it's really not easy to say exactly what's wrong!

  Therefore, I recommend first to access the BIOS and set it to default settings. Don t forget to save the changes.
  More you must connect to the AC adapter and should leave it plugged during on 24 hours to recharge the battery CMOS.

  Maybe it helps to get rid of this error message.
  If it doesn't help, then you should contact a technician for laptop!

• I have an ASUS computer. I installed an older version of clue on it. It work well. I tried to uninstall, but "the data is corrupted". Any help?

  I installed an older version of clue on my computer.  The game does not work very well.  I tried to uninstall, but "the data is corrupted".   The geek squad told me to reinstall the program.  It does not have to uninstall the game.  I tried to untalling through the drive and Control Panel.  Help me please.

  Nevertheless, the issue has nothing to do with Windows Update. Please start a new thread in this forum for assistance: http://social.answers.microsoft.com/Forums/en-US/w7programs/threads

  How to start Windows 7 Mode safe
  http://www.bleepingcomputer.com/tutorials/tutorial61.html#Windows7 ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Counters.dat is corrupted and unreadable

  I kept getting the message when certain programs are open, the latest being 'Corrupt Adobeupdater.exe' and that '\Temporary Internet Files\counters.dat is corrupted and unreadable. "

  Please tell us what seems to be the problem.

  Hello

  1. what security software is installed?

  2. don't you make changes to the computer before this problem?

  Method 1.

  Run a full scan of the computer with the Microsoft Safety Scanner to make sure that the computer is virus-free.

  Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  Method 2.

  If the problem persists, then start the computer in safe mode and run a full scan of computer viruses.

  Advanced startup options (including safe mode): http://windows.microsoft.com/en-US/windows7/Advanced-startup-options-including-safe-mode

  Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  Method 3.

  You can use the restore points for Windows 7 to return to a previous state, when your computer was working properly.

  System Restore: http://windows.microsoft.com/en-us/windows7/products/features/system-restore

  Important: System Restore will return all system files not as documents, email, music, etc., to a previous state. These files of types are completely affected by the restoration of the system. If it was your intention with this tool to recover a deleted file to non-system, try using a file instead of system restore recovery program.

  Let us know if you need assistance with any windows problem. We will be happy to help you.

• Regarding the authorized request property if the data block is the database no.

  I'm now a project located on Oracle Forms 10g.

  There is a DataBlock with certain properties such as

  1 block of data in the databases: No.
  2 query allowed: Yes
  3 interrogate the Data Source Type: table
  4 insert authorized: Yes
  5 update allowed: Yes
  6. Remove allowed: Yes

  If the DataBlock is not database data block are then properties no. 2 to 6 relevent?
  I think these properties must be set to NO and the query data Source Type must be None.
  Can someone help me please.

  Yes... The block of database property must be "NO"... I made the mistake of typo... You can also change other properties... No problem in that

• Verizon Palm Centro with data block incoming picture message issue

  My wife & I have Verizon Palm Centro.  We have a data block on the account that we only wanted to fuse our PDA with our phone to carry less devices.  Recently, someone she knew sent him a picture message.  She never received as to be expected since we have a block of data.  BUT now his phone constantly freezes and will not allow her to put it to sleep.  I noticed that when he behaved in this way, there are two icons triangle above the antenna meter chart, which mean the transfer of data (they go gray and then become green and grey).
   
  To try to remedy the situation, I did a soft reset.  One more question.  Did a Hard Reset.  One more question.  She took it to the Verizon store.  They said he had no trouble finding.  Has continued to be a problem.  Then I saw on the Palm site there is an upgrade of the operating system.  Done (which includes some reset hard).  One more question.  The next day, my wife returned to the Verizon store.  This time, they saw the issue.  They said there was nothing they could do, but give him a new phone.  She brings the phone home and same problem.  I then HotSync had to get all its data back on the phone.
   
  Now, I get a little concerned, as it has been 5 days since the beginning of the question.  As this problem happening my wife tells me of the picture message sent him these days ago.  While it's a data connection, I opened the message Centre and there is an icon of mail with arrows to move through it stay at 0%.  When that disappears, the triangle icons disappear from the graph of power antenna.
   
  I call the technical assistance.  The person is very and said we should would never block because someone should only get this phone for data.  I explained that we wanted only to combine devices.  I explained the picture message. blah blah blah.  He then says that it is from a software on the phone.  Takes me through a bunch of read him information.  All the time that he does not believe me that it's something to do with the unrecovered MMS (which we do not want yet).  In any case, it is more than an hour on the phone with the guy.  It had Palm on instant message and at the back of their hand for me.  He then tells me to do a Hard Reset.  I told her that I've already done a lot and it was not the solution.  I had to do because it could it resolve, he said.  I did, and for the next few minutes, it doesn't lock upwards with the icons.  That is why he said it was fixed and it was something we did on the phone.  Then, he wanted to end the call.  As he was not driving, I ended the call.
   
  Well..................  I did a restore complete everything on the phone my wife, starting by a Safe Hotsync for his calendar, list of tasks and addresses.  Then I restored one - by - one all of his requests including its Documents to go files, etc..  It took another hour +.  The phone worked ok for some time and now 1 day later... The same thing is happening again.
   
  Is there a way to stop this madness?  Verizon can't kill what is trying to get out?  Is there something in the Palm that can kill the message?  Any help would be great.

  PS Our phones have the same exact software on them with the same applications, provided with the phone and the modules provided by Verizon/Palm.  We have the same ringtones.  We have the same content of music on our MicroSD cards.  The only thing different is photos we have taken.  My phone doesn't have this problem.  The only difference is that picture stupid someone message.  Hopefully, it's not mine.  Thanks again.

  Thank you very much for the reply.  After that I posted this, I contacted Verizon Technical Support.  It seems that the problem was exactly what I said it was.  There was a picture message which was held by the data block, but still somehow try to get on the phone.  I spent some time with a very competent tech person who took the time to solve the problems with me (and down tell me).  We tried to remove the block to see if the message would come through.  Still problem.  We went through all kinds of things to reprogram and realign the phone to the Verizon network.  Still problem.  Then he looked again and found a setting in the application of message for MMS messages fired automatically.  When I disabled this setting, bam message came (no picture because of the block) and the problem stopped.  I was very pleased with the help and the phone my wife is no problem.

  P.S., while my wife & I have the same contacts this is a manual process to keep the same.  We have different identifiers of Palm.  Our devices are different.  The only reason why I mentioned in my original post how we hae the inforamtion even had to point out that his phone was screwing and mine was not (with essentially the same content).  Once again, thank you.  G

  Message relates to: Centro (Verizon)

• The values for the items in the list of the other data blocks appear not when running.

  Hello

  I have a new problem again.

  I'm a new form in which there is about 8 blocks. All blocks have their tables in the oracle database.

  Each block has 18 columns with the same column and the column names. But the values in these columns are different and do not match.

  The problem is while I sign the form, it fills only the first data block. Other blocks do not display or fill in the values.

  I can't create a master relationship because all column values are different.

  How show or fill in the values of all the tables?

  Please help me. Thank you.

  Hello

  If your form has really separated tables, then you can simply use a trigger key-exeqry at the level of forms of travel in each block in turn and perform a built-in query execute, eventually returned the starting block.

  That is to say

  go_block('..');

  execute_query;

  go_block('..');

  execute_query;

  etc.

  go_item (...);

  In this case, you would use the block where clause to constrain each table for the game proper.

  If, however, the database has no relationship between the tables, but the content of the data has a correlation, then you could create a relationship of forms manually.

  see you soon

  Stem

• ROWID and data block

  Hello
  I'm using Orace 11 g R2 on Oracle Linux 64-bit 5.6
  I have a simple question. ROWID contains: number of data, the number of file data object, * block * number, line number.
  When he says data block, it doesn't mean Oracle this block or block of disk?
  Thank you all.
  
  Published by: Laus on June 3, 2013 04:16

  Oracle block. The doc for dbms_rowid makes this clear, http://docs.oracle.com/cd/E11882_01/appdev.112/e25788/d_rowid.htm#CIHDGIGD
  --
  John Watson
  Oracle Certified Master s/n
  http://skillbuilders.com

• Data block

  Do we have any kind of place where you can get data block to the practice. The data must match to a kind of schema object relationship. In bulk means that the number of rows should be in crores. Closely on explain plans with data block.

  Random data only get you so far. It is very well for certain types of trials in bulk, but it has two major flaws:

  (1) a lot of performance issues come from tilt in our data. Random generatedly values, while presenting tufts of values is wanted to have the extremes of the distribution of the data that we see in actual data. This includes things like the change in length of string.
  (2) key generation are difficult. Of course, we can generate unique digital keys with ROWNUM but other types or uniqueness are harder and the hassles of foreign key relationships is a complete hemorrhoid.

  So, what to do? Well, there are a number of specific data. The best place to look is [url http://www.infochimps.com/datasets] InfoChimps. This used to be a really great site but the company (not without reason) is looking to make money from their efforts, so they now limit access to a large number of their data sets. However several games is free (although reigistration is necessary) or even some links to hosted public data sets.

  Most of the data sets are CSVs, so there is a certain amount of work needed to bring them into a database. However, it is not too difficult with the external tables, and it is also a useful training full-time.

  Cheers, APC