ORA-01578: ORACLE corrupt data block

Similar Questions

• script/steps to corrupt data blocks

  Please give me some script/not to corrupt data blocks (not the data files).
  I need to check for the recovery test.
  
  Thank you

  http://www.oracleflash.com/9/How-to-perform-block-media-recovery-using-RMAN.html

• Reading excel data file in Oracle form data blocks

  Hi all
  
  I want to read the data from the excel file in the data block of the module of the form. There are many resources available that explain how to put the data in oracle forms in the excel sheet, but I can't find a single resource to achieve this functionality. Can someone please help me get around this problem. Any help will be much appreciated.
  
  Thanks in advance
  Bilal

  Bilal,.
  There is little documentation available through My Oracle Support, which shows how to read an Excel file in a form, but you need a support contract with Oracle to access the document (how to read data from an EXCEL worksheet in a form using WebUtil Client_OLE2 [813535.1 ID]).

  I've seen this issue come up in the forum from time to time, so I wrote a small form demo which illustrates playback in Excel in a form. Discover forms: how to read an Excel file in a form. This demonstration uses the WebUtil library, so you must make sure have WebUtil correctly configured in the Forms Designer, as well as on your application server.

  Hope this helps,
  Craig B-)

  If someone useful or appropriate, please mark accordingly.

• ORA-01578: block of data corrupted ORACLE ORA-01110: data file 46:, ORA-06512: at line 1 ScanningError 1038246

  We get error below of the application team. Please find attached the file backup rman error.

  ORA-01578: ORACLE corrupt data (file # 46, block # 64626) ORA-01110: data file 46: ' / db04_hlt/PHCLMDB/PHCLMDB_DATA/phclm21.dbf' ORA-06512: at "HCLM_ADMIN. SCANPROC_INSUPLOADTEMP", line 16 ORA-06512: at line 1 ScanningError 1038246

  fe40282660394026b5f76bf3f5d649e4 SCANPROC_INSUPLOADTEMP-ORA-01578: data block (file # 46, block # 64626) corrupted ORACLE ORA-01110: data file 46:

  Hello

  Please follow the steps to format corrupt block a used the procedure mentioned in the document below, please note that you need to do several times for all the block corrupted in free space.
  Doc-ID 336133.1===> how corrupt Format block is not part of any Segment.

  Following the notes 293515.1 -->> ORA-1578 ORA-26040 in a LOB segment - Script to resolve errors

  This note is for these errors, but the procedure is exactly the same, we must:

  1 - identify the ROWID affected
  2 - Put the ROWID corrupted on EMPTY_LOB
  3. When you MOVE the LOB to a new Tablespace

  These are essentially the steps, the note shows how

  Kind regards

  Alok

• Corrupted ORACLE data block

  Hello
  What can cause a block of data that is corrupted in the SYSAUX01. Data DBF file?
  
  ORA-01578: ORACLE data block corrupted (file # ORA - 01578: ORACLE data block corrupted (file # 2, block # 98776))
  ORA-01110: data file 2: ' D:\ORADATA\DWHGROUP\SYSAUX01. DBF'
  ORA-26040: data block has been loaded using the NOLOGGING option
  (*, block #) *.
  
  
  What my options?
  It is possible to use for the SYSAUX DBMS_REPAIR?

  Hello

  This problem comes if
  (1) you open your database from backup
  (2) you restore your primary backup database.

  This problem is caused by
  (1) that you have completed your table / index with the nologging option.

  Option you have
  (1) check if you have the main database in place. If so rebuild the object with the logging option (the best option)
  (2) If you do not have primary database and then check what is corrupt table or index. If index rebuild and table then more information would be necessary, and also, this does not guarantee that you would be able to recover.

  Concerning
  Anurag Tibrewal

• Data block corruption?

  Hi all
  
  OraDB 11.2.0.1
  
  Today, we just met this error in oue PROD db. It is the first time that we have achieved this.

  Caused by: java.sql.SQLException: ORA-01578: ORACLE data block corrupted (file #
  5, block # 136230)
  ORA-01110: data file 5: 'C:\ORACLE\ORADATA\ORAJVB7\DATATS01.DBF'
  ORA-26040: Data block was loaded using the NOLOGGING option

  My boss ask you what are the usual cause of this issue.
  I just said, fluctuations in the power supply and the drive is already old and fragile.
  It presents a valid explanation?
  
  How do you handle this issue?
  The FF is also acceptable?
  
  startup nomount
  recover the database.
  
  
  Thank you very much
  
  Edited by: KinsaKaUy? on July 18, 2012 20:19

  KinsaKaUy? wrote:
  Thank you...

  I just thought that 11.2.0.1 is now the high-tech modern database and it has a utility to repair the damaged data. Something like fix DBMS exec (Corrupt block). And presto! corruption will be gone.
  Why is that the process is still primitive :(

  Corruption would be gone on that the storage on which the Oracle block is sitting, would be free of him. If you have a defective material, can not expect Oracle to heal for you, right?

  Aman...

• ORA-01578: block ORACLE (corrupted file # 1, block # 53713) data

  When I tried to export data from the database (Oracle 11 g, 64-bit Linux)
  
  Following error message is im
  
  About to export specified users...
  . export of the actions and the patterns of objects procedures
  EXP-00008: ORACLE error 604
  ORA-00604: an error has occurred at the SQL level 1 recursive
  ORA-01578: block ORACLE (corrupted file # 1, block # 53713) data
  ORA-01110: data file 1: ' / u02/oradata/RSDB1/system01.dbf'
  EXP-00083: the previous problem occurred when calling EXFSYS. DBMS_EXPFIL_DEPASEX P.schema_info_exp
  EXP-00008: ORACLE error 604
  ORA-00604: an error has occurred at the SQL level 1 recursive
  ORA-01578: block ORACLE (corrupted file # 1, block # 55497) data
  ORA-01110: data file 1: ' / u02/oradata/RSDB1/system01.dbf'
  EXP-00083: the previous problem has occurred during the call to SYS. DBMS_CUBE_EXP.schema_i nfo_exp
  . exporting foreign function library names for the user WB_APP_MANAGER
  . export synonyms for PUBLIC types
  EXP-00008: ORACLE error 604
  ORA-00604: an error has occurred at the SQL level 1 recursive
  ORA-01578: block ORACLE (corrupted file # 1, block # 44638) data
  ORA-01110: data file 1: ' / u02/oradata/RSDB1/system01.dbf'
  EXP-00000: export completed unsuccessfully
  
  I do not understand how to solve this problem please help me solve this problem...
  
  
  Thank you

  OK, so you're not do backups at all.

  In other words, that your only option is to reload the database from the most recent export. This means that you going to LOSE data at the time of the last export, up to the current moment in time.

  As others have said, I'll say it again: export is NOT a backup strategy valid! You must run in archivelog, backup your database regularly mode (using the RMAN backup) and backup and Save (once again, with RMAN) all archivelogs generated between backups!

  But it is what it is. You have only export you took. So, you need to work with what you have. Given that corruption is file #1, which is the SYSTEM tablespace datafile, your only option is to drop and re-create the database, and then import your latest export.

  When you have done this, and you have a working database once again, go back and set ŒUVRE a REAL STRATEGY of BACKUP! Use RMAN, place the database in archivelog mode. Do not hesitate!

  Hope that helps,

  -Mark

• Error: ORA-01110, ORA-01578 and ORA-26040

  Oracle installed:

  The RAC

  Oracle Database 11 g Enterprise Edition Release 11.2.0.3.0 - 64 bit Production

  PL/SQL Release 11.2.0.3.0 - Production

  "CORE 11.2.0.3.0 Production."

  AMT for Linux: Version 11.2.0.3.0 - Production

  NLSRTL Version 11.2.0.3.0 - Production

  Linux: Red Hat 64-bit

  Question: I get the following error.  Can someone provide suggestions?

  Thank you.

  Caused by: java.sql.BatchUpdateException: ORA-01578: data corrupted ORACLE (file # 9, block # 316) block
  ORA-01110: data file 9: "+ DATA/msodev/datafile/cmd_default.344.881030253".
  ORA-26040: data block has been loaded using the NOLOGGING option

  Hello

  First ask the dba_extents to identify the nom_segment and nom_tablespace something lke below

  Select the owner, nom_segment, tablespace_name from dba_extents where FILE_ID = 9 and 316 between BLOCK_ID and BLOCK_ID + BLOCKS;

  Once you identify the object you can drop and re-create if his index finger, using DBMS_REPAIR if his table...

  You can find more information in the metalink note

  ORA-1578 / ORA-26040 corrupt blocks by NOLOGGING - explanation of the error and the solution (Doc ID 794505.1)

• ORA-01033: oracle initialization or shutdown in progress.

  I had a 10g oraclexe facility and had some apex in development applications in one of my pc.
  I had to format the hard drive for some reason, so what I did was saved simply to entire folders "app" and "oradata' in 'c:\oraclexe', on another hard drive.
  
  Then in another pc I just installed oracle xe (even 10g version) and just replaced "app" and "oradata' of the new facility at the old backup of files. (after data)
  I updated the host name in "c:\oraclexe\app\oracle\product\10.2.0\server\NETWORK\ADMIN\listener.ora".
  
  Then the database restarted.
  
  I was able to connect to SYS as SYSDBA with the old password, but when I try to log in with the old user account.
  He tells *'ora-01033: oracle initialization or shutdown in progress. *
  
  I tried to allso with 'HR' acount, same result. Homepage also apex does not open.

  Recover the database

  His order of database, restores and restores a database at a given time or at the end of newspapers by progression.

  ALTER Database

  instruction to change, maintain or recover an existing database.

  Read
  docs.oracle.com/cd/B19306_01/server.102/b14200/statements_1004.htm

  Cause of the error:
  There is corruption of block in the tablespace.

  Mark this thread as a response.

• ORA-01092: ORACLE instance is complete. Forced logoff ORA-00942: table or view does not exist on the 12 c CARS

  Hey Geeks,

  I met a problem when starting my 12 c RAC database.

  To mount it fine, but when I try to open, he throws me an error.

  System Global area 1.5400E + 10 bytes

  Bytes of size 4737560 fixed

  2952791528 variable size bytes

  1.2415E + 10 bytes database buffers

  Redo buffers 26857472 bytes

  Mounted database.

  SQL > alter database open;

  change the database open

  *

  ERROR on line 1:

  ORA-01092: ORACLE instance is complete. Disconnection forced

  ORA-00942: table or view does not exist

  Process ID: 11338068

  Session ID: 1429: No.3

  Here is the output of the trace file...

  ORACLE_HOME = / oracle_home/app/orahome

  Name of the system: AIX

  Name of the node: INS1

  Version: 1

  Version: 7

  Machine: 00C8CCA74C00

  Instance name: INST1

  Redo thread mounted by this instance: 1

  Oracle process number: 7

  The Unix process PID: 20381876, image: oracle@ins1 (TNS V1 - V3)

  2014-11-27 22:49:20.892

  SESSION ID: (197.5) 2014-11-27 22:49:20.892

  CUSTOMER ID :() 2014-11-27 22:49:20.892

  NAME OF THE SERVICE :() 2014-11-27 22:49:20.892

  NAME of the MODULE: (sqlplus@ins1 (TNS V1 - V3)) 22:49:20.892 2014-11-27

  ACTION NAME :() 2014-11-27 22:49:20.892

  2014-11-27 22:49:20.889716: start the recovery of field = 0, valid = 0, flags = 0 x 4

  2014-11-27 22:49:24.580

  Awarded with 32 slaves of recovery success

  With the help of 3 buffers overflow by slave of recovery

  2014-11-27 22:49:24.740

  1 post of thread: logseq 15, block 2, CHN 3510749

  cache-bass rba: logseq 15, block 3

  RBA on disk: logseq 15, block 72, RCS 3510824

  Start the recovery at logseq 15, block 3, Yvert 0

  2014-11-27 22:49:24.981

  Started the resilvering redo thread 1 seq 15 blocks 72-73

  2014-11-27 22:49:24.994

  Finished resilvering redo thread 1 seq 15

  2014-11-27 22:49:24.994

  Started writing zeroblks thread 1 seq 15 blocks 74-81

  2014-11-27 22:49:24.994

  Completed written zeroblks thread 1 seq 15

  = Redo read statistics for thread 1 =.

  Total physical reads (from disk and memory): 4096 KB

  -Redo read_disk - statistics

  Read rate (ASYNC): 35KO in 0,25 s = > 0.14 Mb / s

  Long: 0 Ko, moves: 0/104 (0%)

  Longer LWN: 2 k, moves: 0/33 (0%), moved: 0 MB

  Redo last scn: 0x0000.0035922b (3510827)

  ----------------------------------------------

  -Recovery Hash Table statistics

  Hash table buckets = 262144

  More long string hash = 1

  Hash string average = 25/25 = 1.0

  Max compares by lookup = 1

  AVG compares by lookup = 151/176 = 0.9

  ----------------------------------------------

  2014-11-27 22:49:25.007

  KCRA: start the debt for 25 blocks of data collection

  2014-11-27 22:49:25.039

  KCRA: treated blocks = 25/25, has claimed = 25, eliminated = 0

  2014-11-27 22:49:25.054

  Online Redo Log recovery: thread 1 mem Group 6 Seq 15 reading 0

  2014-11-27 22:49:25.060

  Ask again filled with 0.02 MB

  2014-11-27 22:49:25.235

  Control of completed recovery point

  -Recovery Hash Table statistics

  Hash table buckets = 262144

  More long string hash = 1

  Hash string average = 25/25 = 1.0

  Max compares by lookup = 1

  AVG compares by lookup = 176/176 = 1.0

  ----------------------------------------------

  Recovery thread nab 1 seq 15 to 74 with 8 zeroblks sets

  2014-11-27 22:49:26.000

  2014-11-27 22:49:26.000433: validate the domain 0

  2014-11-27 22:49:26.001348: valid domain 0, flags = 0x0

  2014-11-27 22:49:28.315

  County ofsmtab$: 0 entries

  2014-11-27 22:49:28.732

  ORA-00942: table or view does not exist

  ORA-00942: table or view does not exist

  2014-11-27 22:49:28.738

  USER (ospid: 20381876): put an end to litigation because of the 942 error

  

  In my case, the problem solved by running the following...

  GRANT SELECT on SYS. The USER$ in XDB.
  GRANT SELECT on SYS. The USER$ in CTXSYS.
  GRANT SELECT on SYS. The USER$ to DVSYS;
  GRANT SELECT on SYS. The USER$ to LBACSYS.
  GRANT SELECT on SYS. The USER$ to APEX_040200;
  GRANT SELECT on SYS. The USER$ to DV_SECANALYST;

  See the screenshot above.

• Inserting data block to the SPOUT making varchar2 (150) column with currupted

  Hi Chris,
  
  We are facing a problem with the insertion of bulk data on the BEAK in a table
  
  Insert data block to the SPOUT making varchar2 (150) column in a table with the corrupted values.
  column of first row inserted correct, but the second line, columns in the new row as null
  
  We had trace OIC just before the insertion, these values are correctly coming
  But integration doesn't work properly
  
  Could you suggest, what could be the problem, we use the OIC during the client/server connection, this problem is for a direct connection also

  In general, please do not post questions forum for questions where you have already opened a SR. This translates simply by duplication of efforts and is unlikely to lead to a faster resolution. If the problem is serious or complex that you opened a SR, it is very likely that anyone in the forum (including me) will have an instant response and it will probably ask a lot of questions and do a lot of research that is already made by Oracle support.

  Thank you for your understanding and your cooperation.

  Chris

• ORA-01033: Oracle initialization or current shudown

  I can't connect to my Oracle 10g XE both browser and SQL database * more.
  
  I get this error message every time I try: ORA-01033: Oracle initialization or current shudown.
  
  I'm so confused, since I worked with it successfully yesterday and it's morning, I restored my system to yesterday in vain. I tried to stop the database in the start menu and got the prompt that the judgment was a success, I started the database in the start menu and got a prompt of commands that start was successful, but when I try to go to the Home Page of the database in the same start menu , Internet Explorer can not display the page and SQL * Plus will return the above error.
  
  What can I do for any emergency connect to this database?

  The easy solution is to unsintall Oracle XE and reinstall XE, but after checking with a Windows tool that your drive is OK: you will lose all data.

  The difficult is trying to recreate the control with the procedure files manually to adapt to your database of the XE:
  http://download.Oracle.com/docs/CD/B19306_01/backup.102/b14191/osrecov.htm#i1011110. You shouldn't lose all data if the disk is OK and if no other database file is corrupted.

  If you have not added or moved or deleted a file of database
  and if you use the Western character set
  and if you have installed Oracle XE on C:\
  then the following script is OK.

  You must run with:

  c:\> sqlplus / as sysdba
  

  set echo on
  SHUTDOWN ABORT
  STARTUP NOMOUNT
  CREATE CONTROLFILE REUSE DATABASE "XE" NORESETLOGS  ARCHIVELOG
      MAXLOGFILES 16
      MAXLOGMEMBERS 3
      MAXDATAFILES 100
      MAXINSTANCES 8
      MAXLOGHISTORY 292
  LOGFILE
    GROUP 1 'C:\ORACLEXE\APP\ORACLE\FLASH_RECOVERY_AREA\XE\ONLINELOG\O1_MF_1_5HXJ0MVQ_.LOG'  SIZE 50M,
    GROUP 2 'C:\ORACLEXE\APP\ORACLE\FLASH_RECOVERY_AREA\XE\ONLINELOG\O1_MF_2_5HXJ0NR9_.LOG'  SIZE 50M
  -- STANDBY LOGFILE
  DATAFILE
    'C:\ORACLEXE\ORADATA\XE\SYSTEM.DBF',
    'C:\ORACLEXE\ORADATA\XE\UNDO.DBF',
    'C:\ORACLEXE\ORADATA\XE\SYSAUX.DBF',
    'C:\ORACLEXE\ORADATA\XE\USERS.DBF'
  CHARACTER SET WE8MSWIN1252
  ;
  -- Configure RMAN configuration record 1
  VARIABLE RECNO NUMBER;
  EXECUTE :RECNO := SYS.DBMS_BACKUP_RESTORE.SETCONFIG('CONTROLFILE AUTOBACKUP','OFF');
  -- Configure RMAN configuration record 2
  VARIABLE RECNO NUMBER;
  EXECUTE :RECNO := SYS.DBMS_BACKUP_RESTORE.SETCONFIG('RETENTION POLICY','TO REDUNDANCY 2');
  -- Commands to re-create incarnation table
  -- Below log names MUST be changed to existing filenames on
  -- disk. Any one log file from each branch can be used to
  -- re-create incarnation records.
  -- ALTER DATABASE REGISTER LOGFILE 'C:\ORACLEXE\APP\ORACLE\FLASH_RECOVERY_AREA\XE\ARCHIVELOG\2010_02_25\O1_MF_1_1_%U_.ARC';
  -- ALTER DATABASE REGISTER LOGFILE 'C:\ORACLEXE\APP\ORACLE\FLASH_RECOVERY_AREA\XE\ARCHIVELOG\2010_02_25\O1_MF_1_1_%U_.ARC';
  -- ALTER DATABASE REGISTER LOGFILE 'C:\ORACLEXE\APP\ORACLE\FLASH_RECOVERY_AREA\XE\ARCHIVELOG\2010_02_25\O1_MF_1_1_%U_.ARC';
  -- ALTER DATABASE REGISTER LOGFILE 'C:\ORACLEXE\APP\ORACLE\FLASH_RECOVERY_AREA\XE\ARCHIVELOG\2010_02_25\O1_MF_1_1_%U_.ARC';
  -- ALTER DATABASE REGISTER LOGFILE 'C:\ORACLEXE\APP\ORACLE\FLASH_RECOVERY_AREA\XE\ARCHIVELOG\2010_02_25\O1_MF_1_1_%U_.ARC';
  -- Recovery is required if any of the datafiles are restored backups,
  -- or if the last shutdown was not normal or immediate.
  RECOVER DATABASE
  -- All logs need archiving and a log switch is needed.
  ALTER SYSTEM ARCHIVE LOG ALL;
  -- Database can now be opened normally.
  ALTER DATABASE OPEN;
  -- Commands to add tempfiles to temporary tablespaces.
  -- Online tempfiles have complete space information.
  -- Other tempfiles may require adjustment.
  ALTER TABLESPACE TEMP ADD TEMPFILE 'C:\ORACLEXE\ORADATA\XE\TEMP.DBF'
       SIZE 20971520  REUSE AUTOEXTEND ON NEXT 655360  MAXSIZE 32767M;
  -- End of tempfile additions.
  

  In any case if you don't want data, you must back up your database. Oracle XE is simple tools to back up and restore the database. See http://download.oracle.com/docs/cd/B25329_01/doc/admin.102/b25107/backrest.htm#i1004902

  Edited by: P. Forstmann on 25 Feb. 2010 21:22

• Regarding the authorized request property if the data block is the database no.

  I'm now a project located on Oracle Forms 10g.

  There is a DataBlock with certain properties such as

  1 block of data in the databases: No.
  2 query allowed: Yes
  3 interrogate the Data Source Type: table
  4 insert authorized: Yes
  5 update allowed: Yes
  6. Remove allowed: Yes

  If the DataBlock is not database data block are then properties no. 2 to 6 relevent?
  I think these properties must be set to NO and the query data Source Type must be None.
  Can someone help me please.

  Yes... The block of database property must be "NO"... I made the mistake of typo... You can also change other properties... No problem in that

• RMAN Duplicate - ORA-01092: ORACLE terminated instance. Disconnection forced

  Source DB - 11.2.0.2.0

  Target DB - 11.2.0.2.0

  OS - SunOS 5.11

  Hello guys I'm trying to restore a database by using a duplicate order. Here are the scripts that I use.

  This is the script in which the restore.cmd is called.

  -----------------------------restore.sh--------------------------------------------------------------

  #! / usr/bin/ksh

  #PATH $PATH = "" / usr/ccs/bin: / usr/bin: / usr/sbin: / usr/sbin/nsr: / usr/ucb: / usr/ucb: / etc: / usr/local/bin ""

  #LD_LIBRARY_PATH = / usr/openwin/lib: / usr/ccs/lib

  #export PATH LD_LIBRARY_PATH

  GET_DATE = 'date "+ %y %d hour %M %s %m" '

  CHK_DATE = "date"+ %y %m %d"'"

  GET_YEAR = "date" + %y' "

  GET_DAY = "date"+ %d"'"

  Etiquettemois = "date"+ %p"'"

  GET_MONTH = "date" + %m' "

  ORAENV_ASK = NO

  #. / usr/local/bin/oraenv

  . $HOME/.profile

  echo ${ORACLE_SID}

  ################################################################################################################

  echo $ORACLE_HOME $DB_NAME $ORACLE_BASE

  Export ORACLE_HOME, ORACLE_BASE DB_NAME

  EXPHOME = / export/home/oracle

  CLN_Home = / export/home/oracle

  job_log_file = "${EXPHOME}" / rman_restore.log ' "

  Add $(ORACLE_HOME) / bin/rman trace = / export/home/oracle/monsuivi msglog ${EXPHOME} / rman_restore_msg_log.log < <!

  auxiliary connection.

  Set the dbid = 5798365608

  echo setting

  @${CLN_Home} / restore.cmd

  output

  !

  Shortly after the spfile is restore, I get the following error.

  DOUBLE RMAN ERROR-

  connected to the auxiliary database (not started)

  Oracle instance started

  Total System Global Area 8554127360 bytes

  Bytes of size 2175440 fixed

  5117054512 variable size bytes

  3170893824 of database buffers bytes

  Redo buffers 264003584 bytes

  Call krmmmai krmmpem

  RMAN-00571: ===========================================================

  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.

  RMAN-00571: ===========================================================

  RMAN-00601: fatal error in the Recovery Manager

  RMAN-03004: fatal error when executing command

  RMAN-04006: auxiliary database error: ORA-01092: ORACLE terminated instance. Disconnection forced

  RMAN-03002: failure of Db in dual at 27/12/2013 12:18:10

  RMAN-05501: abandonment of duplicate target database

  RMAN-03015: an error has occurred in the script stored memory Script

  ORA-03113: end of file on communication channel

  -TRYING to solve the error-

  When I checked google, said some, it could be undo tablespace issue, so I put the undo_tablespace parameter in the same as source target. Here again, I was getting the same error.

  The source database has not being upgraded, if this isn't a problem with the upgrade.

  can give any output as to how this problem can be solved?

  Thank you

  First: DUPLICATE is NOT restore!

  Second: If a database hits ORA-1092.

  There will be errors in the alerts log.

  Before even this announcement, you should examine the error online and browsed the alert.

  Troubleshooting is any dumping using ctrl-c/ctrl-v and sitting with your shoes on your desk and your hands behind your head to whistle and wait for replies to come.

  -----------

  Sybrand Bakker

  Senior Oracle DBA

• The values for the items in the list of the other data blocks appear not when running.

  Hello

  I have a new problem again.

  I'm a new form in which there is about 8 blocks. All blocks have their tables in the oracle database.

  Each block has 18 columns with the same column and the column names. But the values in these columns are different and do not match.

  The problem is while I sign the form, it fills only the first data block. Other blocks do not display or fill in the values.

  I can't create a master relationship because all column values are different.

  How show or fill in the values of all the tables?

  Please help me. Thank you.

  Hello

  If your form has really separated tables, then you can simply use a trigger key-exeqry at the level of forms of travel in each block in turn and perform a built-in query execute, eventually returned the starting block.

  That is to say

  go_block('..');

  execute_query;

  go_block('..');

  execute_query;

  etc.

  go_item (...);

  In this case, you would use the block where clause to constrain each table for the game proper.

  If, however, the database has no relationship between the tables, but the content of the data has a correlation, then you could create a relationship of forms manually.

  see you soon

  Stem