Data connection problem Note Lenovo K3

Similar Questions

• Clock of endurance causing data connection problems

  I use my Z5 Compact with all the options under Mode endurance running, however, I have noticed pick up my phone to use, the data connection is not available immediately, instead I have to wait for about 10 seconds before I can use any data.

  I have been trying to isolate the issue here and it seems that as long as I've got stamina clock disabled, all right. I only noticed this since the recent update of the firmware, but not sure that this is the cause.

  Everyone knows about this problem?

  When the clock of endurance is activated, there could be a delay for the data connection. It is planned to fix in the next update of software.

• iPhone 5 c data connection problems

  I have a 5 c iPhone running iOS 9.3.1. I can't connect to a data connection. I have 3G and LTE on and off homelessness. I was not able to connect to a given since iOS 8.x.x connectio. When I enabled cellular data, it said 3 G in the top left corner and finally changes to 1 x. If I try to load a website in Safari, I get a pop up that say 'impossible to connect to the Internet' or 'a cellular connection is not currently permitted. I had to have my SIM card fixed, so my operator gave me a replacement phone, and the upper left corner says LTE when I turned on a data connection and it worked by the fine.

  lelandsc wrote:

  I had to have my SIM card fixed, so my operator gave me a replacement phone, and the upper left corner says LTE when I turned on a data connection and it worked by the fine.

  What do you mean that you need to get your SIM card fixed? It sounds like one of two things that cause you problems, either there is a problem with your SIM, or you need to troubleshoot your phone. Have what troubleshooting you tried? You don't list everything, and if you suffer from this problem since iOS 8, I would ask why you do not have the home phone? Who provides a service for your device, Apple, an Apple authorized service provider or your carrier?

• BlackBerry classic classic BlackBerry 4G data connection problem

  Hello people,

  I just bought the classic BB, and I must say that it is a great device (much better then the Android I had before).

  I have only 1 problem. Standard (T-Mobile) connection is 4G. This means:

  (1) I can use the phone to make calls

  (2) it can send and receive data

  The problem I have is that several times a day he spends in 4g, which means that I can call only, but the transfer of data is no longer possible.

  I can solve it by going to "network settings", search for the connection, and then click 4G.

  Maybe the connection is lost sometimes, which is causing the problem, but I don't know why he is not automatically pick the best connection.

  Anyone else have this problem?

  It's pretty boring.

  Thanks in advance for your help.

  Walk

  I know its been a while!

  In fact, I found a solution to this problem.

  It was something to do with conflict with the WIFI. I turned off the wifi and the data connection back, then turn on the wifi when necessary.

  I have an unlimited plan now is not a problem, but nevertheless a faff!

• Mobile data connectivity problem

  My phone shows that is has 4G in the status bar, but my application does not connect to the internet. But when I restart my device it becomes normal and same problem arises again. Can someone give me a permanent solution.

  Try the procedure described in this article to see if they help.

  If you cannot connect to a cellular network or cellular data - Apple Support

• Connectivity problem internet Lenovo p780 with whatsapp

  Dear Sir

  Two days ago I got Lenovo P780 mobile in India.

  my model number is P780_ROW

  Android: 4.2.1

  baseband version: P780. V20

  BUILD NUMBER 780_8G_ROW_S118_130816

  I have 2g mobile connection of vodafone. I can see, it is connected to the internet, am able to connect to the game store of google, facebook, but when I run whatsapp, it just cannot connect to the network?

  What can be the problem? Will I update my firmware?

  Thank you

  Pirre

  Hi all (the one facing this problem).

  Please go to

  Settings > settings > in 'Wireless Networks' head go more... > networks > Access Point > Vodafone Live! must be selected... Then try to CHANGE IT BY 'VODAFONE CONNECT'.and...

  This should solve your problem...!

  Please write to me for further questions @ [email protected]

  Kind regards

  Anuj BB

• 9.3.2 iOS that wake up my iPhone and iPad a cellular connection. They connect to my wifi until I use them. This means that the activity of the Baker all arrives on my data connection and not my wifi network at home. How can I fix it.

  iOS 9.3.2

  My iPhone and iPad wake connected to cellular data so that I have a home network and expect things to happen on my network home. It costs me in the case of the background activity while I'm SLEEPING on my cell the att network connection. How can I fix?

  Thank you

  Barb

  Maybe a WiFi Assist. On the devices go to settings > cellular > scroll all the way down > Wi - Fi help > Toggle Off. See if that helps.

• I m facing a problem of 3 g data card is not connected to my windows 7

  I m facing a problem of 3 g data card is not connected to my window 7, the problem is that when I am connected to the data card in my pc, then click on connect to internet then a display of msg that "pls add a connection profile" when I go to Assisi and optional connection profile then click is no process I m unable to add the connection profile While this data card is correct in other window 7 and etc.

  Follow the steps in article

  http://www.ehow.co.UK/how_7257749_set-up-3G-Internet.html

• Problem connecting USB of Lenovo S890

  Hi, I just bought S890 a few days...

  and I wanted to connect to the computer with the help of the USB

  but it always show it me

  

  and I tried this also

  http://forums.Lenovo.com/T5/Lenovo-phones/S890-ideatool-connection-problem/TD-p/1083109

  but it still works no not for me...

  any solution for this?

  BTW when I simply search a file in my phone, I discovered that there is a file name is "Ideatool."

  and then inside got 2 .exe file with a picture of a question mark on the left side of the file.

  The file name is: ideatool_1.1.8_os.exe and LenovoUsbDriver_1.0.1.exe

  This file cannot be opened...

  My fixed only works if you have turned off all other drivers. You must uninstall all drivers Lenovo that comes with the phone, then follow the steps.

  HOWEVER, you must first try to use the drivers included in the phone itself. The drivers work under Windows. Therefore, transfer it to your computer to make it work. I had the same problem before, and I transfer the drivers by copying SD card, remove the SD card and copy it to the computer with the card reader. Then, run the file in Windows.

  If the included drivers do not work, so what you try my methods.

• Data connection with Vibe P1 problem

  My phone is having problem of cellular connection data connection.
  But it was working fine before the last update.
  I don't know if it's a problem of software update.
  I tried many things, I talked with my service provider (BSNL) for hours and tried everything what they suggest, all to nothing does not.
  I even used another SIM (Vodafone) to check if it was the problem of service providers, but no, the phone does not connect even in this case.
  Tried to change the APN, the network settings and so on.
  Kindly guide me and help me solve this problem.
  Thank you very much.

  Have you tried a factory reset? You have mobile data enabled in the settings?

• Microsoft Office Access Runtime and Data Connectivity 2007 Service Pak 2 will not update

  Today, I upgraded my Vista Ultimate Edition of Windows 7 Ultimate and checking the updates it listed 10 important updates. I went back in and there was still the major update 1 "Microsoft Office Access Runtime and Data Connectivity 2007 Service Pak 2 (SP2) who refuses to update which results in an error. I tried several times with the same error that results. Any suggestions as to why?

  The update could not update with no error code, just says 'update failed." However after that restart and check the view of the update the update again must have occurred because it is no longer returns in search of updates.  Thanks for responding to my problem

• connection problem of data with the support of mobistar (Belgium)

  WiFi works. Data connection isn't.

  The signal 'H' or 'E' is highlighted. I tried with the parameters of android and iphone Mobistar Belgium Web site and with all types of authentication. But it is impossible to connect.

  I will try with a sim card from another carrier and let you know.

  In the meantime, does anyone know if there are any specific APN settings for mobistar.be?

  Hi yellowtrolley,

  Thank you for reporting this issue. Please try the following to the APN settings I found on this site nd make sure your specific device supports the following frequencies:

  • GSM 900/1800 (2G GSM) net
  • W CDMA 2100 (3 G UMTS)

  The APN settings:

  • username: mobistar
  • password: mobistar
  • Name of the APN: web.pro.be

  You can also try this page if you need more specific parameters.

  Please let us know if this solves your problem, or if you have other questions about your Firefox OS device.

  Thank you!! =)

  -Ralph

• I can not get the automatic updates on my samsung jack sgh-i616. _ "connection to the update server is not available. Check your data connection settings and make sure that the device date and time are correct "___RESULT CODE: 80072ee7__ _"

  I can't get the automatic updates on my samsung jack sgh-i616.

   

  "Connection to the update server is not available. "Check your data connection settings and make sure that the device date and time are correct.

   

  RESULT CODE: 80072ee7

   

  -It is a windows mobile 6.1
  
  
  Thank you very much! = D

  As a guide.

  This error code translates ERROR_INTERNET_CANNOT_CONNECT.

  You may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates
  http://support.Microsoft.com/kb/836941

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• Connection problem: The DHCP service does not work.

  Original title: connection problem

  After got rid of a virus, my computer is always trying to get the network address. I found that the DHCP service does not work on my computer. How can I reinstall. I am running windows xp service pack 3

  Hello

  Follow these steps and check if they help.

  Step 1:

  Look for the DHCP Client service and DNS Client Services if they are started.

  a. Click Start.
  b. click on run and type Services.
  c. click right on - run as administrator.

  Check if the below mentioned services has mentioned State and type start.

  Client DHCP started Automatic\Manual.
  Client DNS started Automatic\Manual.

  Also check the dependency that are required for the DHCP Client services and DNS Client Service runs.

  To verify that double-click the service, and click the Dependencies tab.

  Step 2:

  I suggest you to reset TCP/IP settings to solve the problem.

  How to reset the Protocol Internet (TCP/IP)

• After meeting a connection problem, the computer does not connect to the network through a wired connection or wireless

  Original title:

  I have HP laptop with Windows Vista, I recently met a connection problem. I can't connect to the wired or wireless network. I network is invisible and I want to go back to the old setting. Could you please tell me how to do this

  Hello

  1. What is the brand and model of the computer?

  2. what happens when you try to connect to the Internet?

  3. do you get an error message? If Yes, what is the exact error message?

  4. are you aware of any changes made to the computer, before the show?

  Method 1:

  Follow the instructions in the following link.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:

  Update the NIC drivers and check the issue.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  I hope this helps.