I m facing a problem of 3 g data card is not connected to my windows 7

Similar Questions

• What does that mean? -This problem occurred because your graphics card does not support the required version of DirectX. This version of Windows requires a DirectX 9.0 compatible video card or newer.

  I tried viewing a presentation power point and got to page 2 and my computer crashed.  Thought on... what he did previously trying to display a PPP file, but I thought that it was not my computer to the actual file.  now I have my doubts and also this time an error message came that said... This problem occurred because your graphics card does not support the required version of DirectX. This version of Windows requires a DirectX 9.0 compatible video card or newer.  can someone tell me what I should do next?

  You left out which version of DirectX has been shown.

  As far as I know, your Intel 945GM should support DirectX 9 and because you have XP sp3, you must have at least DirectX 9 installed.

  I met the following, but it shouldn't apply to Powerpoint:

  Some such as the Intel 945 GM Intel video cards have a design limitation which may cause problems when you try to run the Source Engine games. 3D graphics kernel does not support transformation of material, light and the vertex shader to similar technologies, which is an important part of the pipeline of 3D acceleration. Instead, this functionality is emulated in software that can reduce the compatibility and performance with 3D games.

  I don't have a solution for you (assuming that DXDIAG, in fact, reports to have DirectX 9 or higher).  You can see if you install a new driver support, but if it were me, I would be first contact Acer technical support or ask your question in another forum as one of the following conditions:

  Intel graphics Forum: http://communities.intel.com/community/tech/graphics
  Forum PowerPoint: http://answers.microsoft.com/en-us/office/forum/powerpoint (select the corresponding forum for your version of Powerpoint).  Include the results of DxDiag, including the version of DirectX.  If there is something unusual about the image that causes the crash, include this info as well.

  Normally, for notebook/laptop computer, it is better to get the drivers of the mfr of computer rather than the manufacturer of the device.

  Acer drivers for your computer are here: http://support.acer.com/us/en/product/default.aspx?tab=1&modelId=535 (you want the Intel VGA for XP driver)

  Intel has a newer driver: http://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=Internet+Devices&ProductLine=Netbooks&ProductProduct=Mobile+Intel%C2%AE+945GM+Express+Chipset+Family
  It's the main Intel support page: http://www.intel.com/p/en_US/support/highlights/graphics/945gm

• Problem of PSG - Samsung Galaxy phone does not connect on windows 7 pc

  Problem of PSG - Samsung Galaxy phone does not connect on windows 7 pc

  I have two identical, the Samsung Galaxy phones, it connects to the pc to transfer files either does not connect despite the many possible corrections, I've read online by train.

  The phone tries to connect but is a problem of the PSG, while it is plugged said to install the driver, then momentarily, it says ready to use and then goes back to install driver again, it done a few times and then says failed.

  I tried to reset the phone to factory settings, reinstall the driver etc etc but nothing I tried works.

  I've read other posts of similar questions and have created a mtltrace.etl file, but I don't know where or how to download for investigation.

  Any help appreciated

  Hello Rob,

  Thank you for the update on the issue.

  I suggest you to uninstall all the drivers, that is Samsung as well as Bluetooth.

  Then, restart the computer and plug all phones Samsung three each so install the drivers and software from Samsung kies from the link below:

  http://www.Samsung.com/UK/support/model/gt-S6810PWNBTU

  After installing everything that the Samsung and then restart the computer and then plug the adapter Bluetooth (driver installation) and check if the problem persists.

  Thank you.

• Error notification of 'not connected' in taskbar & Windows Update problem

  Under Windows 64 Pro System i5 Intel, discovered the RocketTab advertising program and removed with Spybot.  Next day when I started the system the internet icon in the task bar said "not connected - no available connection", also only shows 'unknown' network connections active in the centre network and sharing, but browser and more program online function still works.  But when I tried to start the Windows Update program, it wouldn't start.  Downloaded Windows Update repair program, it corrects an error in registry but said that he could not fix the program starts.

  I have read several questions on this site that looked and tried a start-up manual of the SSTPS, but received the error 998, also receive the "error 1068: the dependency service could not start and failed to start the Remote Access Connection Manager Service", when you try to manually start the program RACMS.

  Check all services "Remote Access Connection Manager": the following results

  i. Secure Socket Tunneling Protocol Service - error 998 does not start

  II. telephone - running

  III. Plug n Play - running

  IV. Remote Procedure Call (RPC) - running

  v. DCOM - running server process Launcher

  VI RPC end point mapper. -during the execution

  Ran Windows System File Checker and repaired some registry files but could not repair

  "webio.dll"
  

  folder Windows\System32

  If this file is incorrectly routing memory of pagination for the SSTPS at startup and causes the 998 error that stops the remote access connection manager service to start and gives me startup problems with Windows Update Service (and a few other programs that use the same Protocol)

  If it is then I know that I can replace manually, but I don't want any changes manually in the registry if there is a better solution.

  Thanks in advance for any help I get.

  Hello, thanks for the response, it is a stand-alone workstation, no programs have been installed, but looking from the log files, there is a block of HARD drive error which was autocorrected day before it took place.

  So I just manually replaced the "webio.dll" file in the folder window\system32\ on the installation CD and he corrected two errors.

  Sincerely,

  DM_164

• Attempt to connect wi fi on my Dell computer, running windows XP? Have DSL but not Ethernet. Faced with problems. Checked with CISCO router but not help there. CANY anyone help

  I have a problem connecting to a Cisco E100 router to my computer. My count (office) does not have a wireless. I have DSL from. Cisco tells me to plug a router using Ethernet cable to connect. I don't have an Ethernet connection on my computer. At present I have USB connect the computer to the Westell modem.  Can anyone help? I hope this is enough information. Basically what I'm hoping to do is to install the WiFi so I can use a tablet now and maybe a laptop this last on.

  Thank you

  On the routers only house you can use USB connections are those provided by some ISPs.  An Ethernet connection between the router and the computer is far more preferred.

  Your router a Cisco E1000 or is it really E100 (I thought that Cisco makes a model with this designation not)?

  It is quite surprising that you don't have an Ethernet connection that is built into your computer.  What is the complete model number (or, preferably, the Number of Service Dell)?

  Open the Device Manager (start > run > devmgmt.msc > OK).  Expand the "Network card" category by clicking on the + next to him.  What devices are listed in this category.

  If you don't really have an Ethernet or an adapter wireless built into your computer, you can add one, using a PCI internal (if you have a desktop/Tower computer) or external (PC card for laptops) or USB to laptops or desktop/towers.

  Also, the normal configuration is to connect your DSL modem to the router and then the router to the computer.  If your Westell modem has an Ethernet connection, you must use your new router in a non-standard configuration.  Even if the Westell modem has an Ethernet port, you may need to do some reconfiguration for her as well.  What is the complete model of the Westell modem number?

• problem of format of date - ORA-01843: not a valid month beaked call OCIStmtExecu

  Hello
  I have a problem with the date format
  in QAS I report with only 2 columns:
  col1.date_test: casting (2999-12-31' AS DATE)
  col2. Year
  
  the result is:
  

  CAST ('31-12-2999' AS DATE )  year
  31-12-2999                    2011

  When I run exactly the same on the PRD, I get the message:
  message: ORA-01843: not a valid month in the OIC call OCIStmtExecute.
  
  Obi version: 10.1.3.2.1 the two QAS/PRD
  DB version: 10.2.0.5.0 the two QAS/PRD
  
  I checked the following and they are exatly the same QAS and PRD: (checked via SQLPLUS)
  NLS_Database_Parameters DD-MON-RR
  v$ nls_parameters DD-MON-RR
  
  
  the repostiory is the same, we moved to QAS for PRD;
  the cast_supported is checked (but I checked the NQSConfig.INI anyway, the settings are identical in the two EPS)
  
  IM out of ideas, what else can that check to see what the difference is in the configuration that causes the error above;
  I have already followed the advice and checked what was possible, but it seems good;
  http://gerardnico.com/wiki/dat/OBIEE/cast_as_date
  
  ID appreciate advice;
  Thank you
  Rgds

  Hello
  I wasn't sure on the exact reason, but what we were doing we is alligned the format of the date in the following way:

  NQSConfig:

  DATE_TIME_DISPLAY_FORMAT = "dd-mm-yyyy hh ';
  DATE_DISPLAY_FORMAT = "yyyy-mm-dd";

  
  kmsgLanguageName_en
  en
  locale: en
  ,
  .
  ,
  -
  :
  AM
  PM
  SS tt
  AAAA-MM-JJ - we fixed this line
  DD MMMM yyyy
  -#
  DMY
  victory: 0409
  fake
  .............
  
  AAAA-MM-JJ - we fixed this line
  

  in the repository, we have added the following command:
  Log on to:
  ALTER SESSION SET NLS_DATE_FORMAT = "DD-MM-YYYY

  Now we know all the problems with dates;
  I hope he stays this way :-)
  Rgds

• Problem with the CLOB data type.

  Greetings,
  
  I am facing a problem with the CLOB data type. I know that the CLOB data type is 4 GB (I use Oracle 9i). But in the Pl Sql procedure, I can only store 34305 size for a CLOB variable character data.
  
  This is the test script that I am trying to run.
  
  DECLARE
  -Local variables here*.
  I have INTEGER;
  C_1 CLOB.
  BEGIN
  FOR Rec IN (SELECT
  *
  ACCORDING TO THE TABLE)
  LOOP
  C_1: = c_1 | Rec.Clo_1;
  END LOOP;
  EXCEPTION
  WHILE OTHERS THEN
  Dbms_Output.put_line (SQLERRM);
  END;
  
  
  Here variable C_1 range value 34305 good character regardless of type CLOB. Now the above script fails if query my buckle - huge number of return values. It is throwing the exception "error during transfer of files ORA-06502: PL/SQL: digital error or value."
  
  He would be grateful if someone can help me on this.
  
  Thank you.

  You are probably better off using DBMS_LOB.append, instead of the concatenation of varchar2 (|).

  And... take off your when-other Manager exceptions, please...

• Windows connection problems and "Windows could not log in the Windows Event Service.

  September 14, 2014, I installed the hotfix for Windows (KB2590550).

  When I try to log on to a standard user account (not Admin), I would get an error that might say something like "Windows could not connect to the Windows Service Service event".  I click OK and then get a totally blank screen showing on the arrow of the mouse (which can be moved).

  Around this same time, when I was able to connect, I got a "not genuine Windows" pop up.  My windows 7 came factory-installed by Dell (Dec. 2011) and I got no re-imaging, re - install or repair since I got the computer.  I've also been running Symantec Endpoint Protection (version DoD) for 2011 as well.

  When I login as administrator (different account), I get an error "Failed to connect to the Windows Event Service" or something like it in a control bar bubble popup.

  I studied the Knowledge Base, and he said to apply the patch to KB2590550.

  Since then, the question is still common and works (sometimes) when I reset the password for the standard user.  In addition, all updates of the operating system, patches, etc. have failed since then.

  Now, I get occasional blue screens immediately as windows starts to load (just after the initial windows graphics) which triggers a reboot.

  Service Pack 1 is installed.

  Help, please!

  Hello

  Thank you for the update on the issue.

  If the problem still persists I suggest to run the SFC scan to check the integrity of the system and see what it finds.

   

  The sfc/scannow (System File Checker) command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  We can check & repair missing and corrupt files by the following article in the Microsoft Knowledge Base.

  1. Go to Start, click all programs and open the Accessories.
  2. Right-click on command prompt in the list programs, and then select run as administrator. If you are prompted for an administrator password or for confirmation, type your password, or click OK.
  3. In the command prompt, type the following command and press ENTER:

  sfc/scannow

  
  

  For more information, refer to this link:

  http://support.Microsoft.com/kb/929833/en-us

  Get back to us with the result of the analysis so that we can offer you additional troubleshooting steps.

  Kind regards.

• I am facing a problem with the beep.vi. I have a DAQ program, which acquired the signal and compare it to a threshold value. When a signal is out of range, a Visual and sound alarm has occurred. I use the VI beep.vi to generate the sound.

  I am facing a problem with the beep.vi.  I have a DAQ program, which acquired the signal and compare it to a threshold value. When a signal is out of range, a Visual and sound alarm has occurred. I use the VI beep.vi to generate the sound. Everything works fine except the sound alarm. It gives the table 1 d of type mismatch. I tried to fix this by placing it in a box structure. But it still does not work. If someone could help? Please find attached my VI. Best wishes to all visitors to the Forums of Discussion OR.

  Ihab El-Sayed

  published here: http://forums.ni.com/t5/LabVIEW/Playing-sound-based-on-exceeding-a-threshold-value-1D-array-data/m-p...

• Pavilion 15-n047tx: please solve my problem I am facing bluetooth problem

  HIII... I am facing a problem with bluetooth that I installed the hp site adter bluetooth driver signing bluetooth not highlighted in the Device Manager I see in other devices bluetooth connector properties so it shows driver for this device not installed... what should I do? use windows 8 and no model No 15-n057tx Pavilion

  Hello:

  If you have installed Windows 8, you need the bluetooth driver for the wireless card model that your laptop is...

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_130390_1

• I am facing a problem with the POWER of ODIN 9.1.0.5, my broker is Indiainfoline, my OS is Vista ultimate, when I login, everytime I get an error 'System Error (10055) (setsockopt)'.

  I am facing a problem with the POWER of ODIN 9.1.0.5, my broker is Indiainfoline, my OS is Vista ultimate, when I login, everytime I get an error 'System Error (10055) (setsockopt)'.

  Check out these links:

  System (10055) error (setsockopt) Solution
  http://www.win7heads.com/software/82898-system-error-10055-setsockopt-solution.html

  ODIN request does not work Windows 7
  http://social.technet.Microsoft.com/forums/en/w7itproappcompat/thread/ddbe30c8-f4c6-4B8F-ac91-85aa07191ea3

• Microsoft Picture Manager has stopped working I am facing this problem two previous hours__

  Microsoft Picture Manager has stopped working, I faced this problem two previous hours.when I open programs view massage on screen photo managrt has stopped working

  Hi Araud,

  What programs do you speak? Remember to make changes to the computer before this problem?

  This problem can occur because of no present conflicts of Microsoft programs on the computer, I suggest you try the following steps:

  Step 1: Put the computer to clean and test start

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.

  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not the computer to start normal follow step 7 in the link.

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I try to install my Adobe Acrobat 9 on a newly purchased computer, but getting the message that my serial No. is not valid. I faced the problem of the last time I changed my PC, but Adobe offers support.

  I try to install my Adobe Acrobat 9 on a newly purchased computer, but getting the message that my serial No. is not valid. I faced the problem of the last time I changed my PC, but Adobe offers support.

  Acrobat 9 is not compatible with the current operating system, which is probably the reason why they don't support you, but they still let you know if your s/n is valid or not... Try to contact them again and ask for this information.

• I am facing some problems with the installation of data protection. Please see below for details

  We use the data protection in our project.  The research that I have done in protecting data, I realized that the FDM adds the data in protected intersections to load the file that is created by FDM via the import process. The problem is that there are actions given in HFM and I get an error that says: "error: load the file cannot contain action data according to user option." I'm pretty sure that some user option (it would be great if you have an idea where I can find this user option) prevents data already present of shares to be loaded via FDM. Have faced this kind of error before? Is there a work around on this?

  Thank you

  Rohit

  Hello

  The user option which is the origin of the problem is 'File Contains Data property'. You must make sure that this load option is enabled when you start loading in FDM process if the dataset that you present must contain data of shares.

  Kind regards

  Simon

• Facing a problem with writing the custom for WLS identity assertion provider

  I am facing a problem with writing the custom for WLS identity assertion provider.

  Requirement:

  Asserter identity configured in WLS should get called when the following cookie is sent in a request by my application
  cookie name: OAMAuthnCookie_blr1234567.idc.oracle.com:7777
  
  I added the name of the cookie as a token of support and Active token in WeblogicCustomIdentityAsserter.xml
  
  < MBeanAttribute
  Name = "SupportedTypes.
  Type = "java.lang.String [].
  Writeable = "false".
  Default = "new String() {& quot; OAMAuthnCookie_blr1234567.idc.oracle.com:7777 & quot ;}.
  / >
  <!-ActiveTypes attribute contains the subset of your mbean SupportedTypes who are active in the area. ->
  < MBeanAttribute
  Name = "ActiveTypes".
  Type = "java.lang.String [].
  Default = "new String() {& quot; OAMAuthnCookie_blr1234567.idc.oracle.com:7777 & quot ;}.
  / >

  Problem:

  Identity asserter provider is not invoked for the request that has the cookie named OAMAuthnCookie_blr1234567.idc.oracle.com:7777.
  
  I did some experiments with the cookie name, to see where the problem could be
  
  Identity asserter provider is triggered for the following cookies:
  OAMAuthnCookie_blr1234567.idc.oracle.com7777.
  blr1234567. IDC. Oracle
  blr12_XXX. IDC. Oracle.com
  
  and it does not work for cookie name - OAMAuthnCookie_blr1234567.idc.oracle.com:7777
  
  I think that the name of the token supports not the colon. I don't have control over the name of the cookie, two points will always be
  
  Tried it with giving the name of the cookie after the encoding of the colon
  

  < MBeanAttribute

  Name = "SupportedTypes.

  Type = "java.lang.String [].

  Writeable = "false".

  Default = "new String() {& quot; OAMAuthnCookie_blr2211441.idc.oracle.com & #58;. 7777 & quot ;} »

  / >

  
  But still does not work
  Am I missing something? Any help will be appreciated.
  Help, please!

  colon ': ' is an illegal character in the name of the cookie.

  RFC 2616, Section 2.2 says:

  token = 1 *.

  separators = "(" | ")" | " <" |="" "="">" | " @"

  | "," | ";" | ":" | " \" |<">

  | "/" | "[" | "]" | "?" | "="

  | "{" | "}" | SP | HT

  It is clear ":" a "separator" and thus not allowed in a token or a cookie name.