Data ExecutionPrevention closed Windows

Similar Questions

• When I try to access 'My images' closed Windows program using its Data Execution Prevention

  Original title: when I try to access the closed Windows "My pictures" the program using it is Data Execution Prevention - how can I stop this?

  See above

  Hi PeterMcRitchie,

  ·         Did you do changes on the computer before the show?

  ·         You get the error message?

  Follow these steps:

  Step 1: Start the computer in safe mode and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2: If the problem does not still in safe mode, perform a clean boot to see if there is no conflict of software like clean boot helps you eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

• Put into service takes more than 15 minutes. Stop is worse. It hangs at "closing Windows" regardless of the programs that I run is extremely slowly.

  Original title: start & close problem. Slow response

  My PC is running Window XP SP2. I did all the updates.

  Recently commissioning takes more than 15 minutes. Stop is worse. It hangs at the "closing Windows.
  Whatever programs that I run is extremely slow.
  I ran virus scan, microsoft fixed, but the problem persists.

  Well, I think you don't like it, but the first thing to do is to eliminate by using their special tools Norton Uninstall program:

  https://www-secure.Symantec.com/Norton-support/JSP/help-solutions.jsp?LG=English&CT=United+States&docid=20080710133834EN&product=home&version=1&PVID=f-home

  Now, you might think I be without protection and get some bad things on my computer, but you just want to see how things are going without it.  Just don't visit WWW stupid or silly sites, where you can pick up some virus or malware and you can always install a new copy, but I think it's a big headache for you now.

  It might be out of date, too many options of protection installed, etc.  More protection is not always better, and you will pay for it in the performance of the system with the more stuff you add.

  Then when Norton is gone, proceed as follows:

  No matter what you use for malware protection, follow these steps:

  Download, install, update and do a full scan with these free malware detection programs at:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

  Consider instead of Microsoft Security Essentials or Norton - he did a good job.

  We must eliminate what can cause problems, so I'd start with Norton.  You can put it back later if you want, but you need to see how things are going without it.  Moving things to a good operating system that you are happy with first.

  Eliminate potential problems one at a time and test thing out... one thing at a time.

  Symantec/Norton is you biggest problem right now.

  Check your NVIDIA drivers:

  I use the NVIDIA site and let scan them online take a look at your video system and see what he suggests for drivers and consider their analysis if they offer a new driver.

  It is recommended to run the scan NVIDIA with Internet Explorer.

  Here is the address of the NVIDIA page:
  http://www.nvidia.com/download/Prescan.aspx?lang=en-us

  Read the instructions, and then click the DRIVERS GRAPHICS button to start scan and answered in the affirmative, if asked to install the plugin required to run the NVIDIA scan.

  Get rid of Norton.

• Problems syncing of Smartphones from blackBerry Desktop Manager: closed windows program

  I have Windows Vista and my BB Desktop manager is v4.5.  Over the past 2 weeks I couldn't sync my BB 8330 closed windows the program after she compares the calendar in outlook and tells me I have a crash of the application.  I read all the threads and instructions to fix this problem and have tried each of the solutions, but to no avail.  I am at a loss to know what to do now.

  I found the solution!   There was a corrupt outlook calendar entry.  I'm not sure that one but here is what I did to solve the problem: I backed up my data in my device using the backup feature.  Given that I had isolated this calendar was the problem, I then set up my sync not sync calendar and make a one-way sync outllook on my device, replace all data in the device.  I had a successful synchronization and then went I reconfigured my sync to synchronize everything done the two-way synchronization.  Once again, success!  Thanks for all the suggestions you gave.

• OS data and the window of TimeCapsule

  I want to read and write data in timecapsule window Os.  What should I do and what it takes? Thank you very much for you're help a friend.

  The time Capsule will share its internal hard drive so that OS X, Windows or Linux network clients can access the files stored on it. There should be no additional settings required on the TC to... except that you must make sure that the option "Enable file sharing" is enabled on the AirPort Utility disk tab.

  You access this hard drive from Windows like any other network drive.

• What should I do if "Recently closed Windows" shows nothing?

  Today, I came across a very unusual problem. I was surfing the web and click on a url and it said to open it in a new tab. Instead of display 'Sign in', he showed a tab that was totally Virgin I clicked several times more and I duplicated the process. In addition, the X to close the tabs had disappeared as well. Not sure what to do I just closed the window entirely. I had a second window open, so I had to still Firefox will. When I flew over "Recently closed tabs", he showed the closed tabs that came from the second window in the box that pops out. I thought that 'Ok, everything looks very good." I then on "Recently closed Windows" and absolutely nothing jumped out. No box or anything like that. I tried to restart, but got the same result. I even tried to open a new window and go to something in the Favorites and closed the window. Still nothing.

  This has me very confused.

  I use Firefox on Ubuntu 14.04.2 39.0

  After a few farm unexpectedly launches of Firefox and it suddenly works again. Very strange.

• How to re - activate the functions 'Restore previous Session', "Recently closed tabs" and "Recently closed Windows" in the menu of history?

  For some time, four choices in the restore section (tabs of other devices, Previous Session Restore recently closed tabs and recently closed Windows) have been shaded. Keyboard shortcuts do not work, and didn't undo closed tab in the context menu of the tab.

  I found and tried various patches to do this, including:

  • From Firefox in Mode safe without addons.
  • Firefox reset.
  • Change the values of browser.sessionstore.max_tabs_undo and browser.sessionstore.max_windows_undo in all: config.
  • Check to see if I have a user.js in profile Firefox. (I don't).
  • Verify that the private browsing is not the default mode. (It is not).
  • Create a profile to see if it had the same problem. (He did.)
  • Running anti-malware analysis. (BitDefender and SpyBot).
  • Temporarily disable my anti-virus and anti-malware.

  Any of these solve my problems.

  Other devices tab is grayed out, but I've never used, and it might have previously grayed out.

  The story works in general. Sites I visit are added to the log.

  Preferences are saved correctly when I change them.

  Any advice on how to solve the problem would be much appreciated, as I am very fond of these features and often served until they stopped working.

  ADDITIVE

  After that looking through the list of preferences of change created by the resolution of the problems, I tried now also reset the following text:

  • browser.places.smartBookmarksVersion
  • browser.newtabpage.storageVersion
  • Browser.cache.Disk.Capacity
  • Browser.cache.Disk.smart_size.first_run
  • Browser.cache.Disk.smart_size.use_old_max
  • Browser.cache.Disk.smart_size_cached_value

  The problem persists.

  I finally managed to understand this. In searching the Web, I found a thread detailing a similar problem on the Mozillazine forum. The problem has been identified as a missing browser.sessionstore.enabled set, so I went looking in Subject: config and couldn't find it. After creating the entry, by assigning the value true and restart Firefox, the functions of recovery/recently started working again. Apparently, some bookmark plugins and session-based can cause this problem, but in my case, it must have been something else, that I never had no such plug-ins installed.

  If you have this problem, here's a detailed itinerary of the way I fixed it. Whereas there seems to be several problems that can cause restore/recently functions to stop working, it is not a guaranteed fix, but it is still a thing to try, at least.

  1. Open a new tab or window.
  2. Type of topic: config address in the box and press ENTER.
  3. Read reviews and promise to be careful.
  4. Copy this: browser.sessionstore.enabled - and paste in Subject: config'search box in s. press ENTER.
  5. If you copied the text at the top right, the setting should appear in the list. If it is not the case, you have the same problem, I did. (I would say that you copy/paste the text indicated and only this text before moving on to double check).
  6. If the parameter does not exist, right click on the parameters of the list and choose new-> Boolean. Paste the parameter name that you copied previously in the name box, click OK and then set the Boolean true. Once you have click OK, restart Firefox, and (hopefully) things should work properly again.

  Thanks to everyone who offered help and thoughts!

• change the number of recently closed windows, firefox remembers

  Hi, I want to increase the number of windows recently closed, who remembers to Firefox. Currently, he remembers three recently closed windows, but often when I click on hypertext links (no pop ups) they open automatically in a new window, which functionally removes the registration of windows I had open and he wanted to see again... that now they are gone, apparently forever. Is there some settings to change that? I don't need or want that Firefox remember my entire browsing history, I just want to be able to return on the 6 or 7 windows recently closed because 3 is not sufficient. Thank you.

  By default, Firefox stores only 10 "previously closed tabs" out the window and 3 'previously closed windows.' To increase these values:

  (1) in a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.

  (2) in the search above the list box, type or paste sess and make a pause so that the list is filtered

  (3) double-click the preference browser.sessionstore.max_windows_undo and enter your preferred Windows (I have 10).

  (4) If you want, double-click the preference browser.sessionstore.max_tabs_undo and enter your favorite number of tabs (I have 20).

• Failed to retrieve the recently closed windows browser tabs

  Yesterday, when I was not bothered just opening my browser, I opened a tab next to him do a little homework, and without thinking, I closed the browser with the last browser as well, which means I lost all my information from that, but didn't know until the next day.

  I had this kind of problems before, but I could watch my story, then re - open my window closed recently. This time, however when I tried to do the same thing the next day that the 'closed window' was grey, as if she did not save the things that I did not open before and the worst, it's that I've lost probably close or more than 200 tablets and this is not laugh, because all the things I had before were things that I was now and save for months until I went to use it.

  I tried to find a solution by looking at my story earlier and from back, but most of the information I had had been kept for a few months, which means that I can't check it out.

  Could I possibly want to ask you to find a solution for me please because this has gotten me very depressed that I can't get back the things I love as long as lose it depressed me to the point that I lied on my bed for a few hours without sleep.

  Thank you.

  Hi Firemonkey008, I guess the .bak file looks like a good candidate for the missing session very recently. That's what we hope to find. Yes, it's that you rename sessionstore.js to. You must rename or delete the existing sessionstore.js first, or Windows will not let you do the name change.

• Empty windows appear in the recently closed Windows list

  Recently, I upgraded to Firefox 13.0.1. (It seems that he could have two updates on the same day or after the other very short, but I'm not sure of him. I will be reminding upgrades of multiple instances of Firefox, all this same version. Thus, it * could * be true that this problem has arisen with this version or a recent previous version.)

  Since the upgrade, empty windows appear in the list of recently closed Windows (RCWL). I try to keep the clean list, so when I'm done with a window holding sites I know I don't want to go back, I close all the tabs in the window, leaving an unused new tab *, and then close the window. These windows should not be included in the RCWL, but they are now.

  [* I put new tabs to about: blank so that they will load the pages automatically.]

  Since this standard behavior change comes with an upgrade, and since I can't find any reference to it elsewhere, including the Support of Mozilla, I suspect that it may be a new bug.

  In troubleshooting, I tried deleting the list recently closed in these windows and tabs. I've never had before, but it seemed worth trying and as something that might have been relevant. I thought that perhaps a window would not "Save as really empty ' if it had recently closed tabs in the list. This tactic did not work.

  I also tried to start Firefox in Mode safe, the reopening of all the RCWL, each one tab - a 'new tab' in all cases - closing then close each window. They always appear in the RCWL.

  Please let me know if I can (or need to) provide additional information. Thanks for any help!

  Try to set the browser.newtab.url pref to about: blank so currently, you do not use this parameter.

  • http://KB.mozillazine.org/about:config

• Is there a possibility that MusicBrainz can be added as a data provider for Windows Media Player

  When you use Windows Media Player, I was hurt a lot to identify my music. A lot of music I have is not available in the Microsoft music meta service database. What gives? Would be nice if Microsoft could be added to their database. MusicBrainz is a big data provider for Windows Media Player and would make it easier for information about the available media. Data MusicBrainz are permitted in the public domain and some under Creative Commons (CC) license. I don't think that Rovi has a contract saying to Microsoft data to use. I can cite other data in addition to the AMG providers: Journal of CD Japan, CD newspaper China, ZACR DBS and feedback from users. I can almost guarantee you if Microsoft used the MusicBrainz data, Windows Media Player would be much easier for the Organization of the music. Data MusicBrainz are much better quality than WMP user feedback data.

  Hi chuckwoodakawoodchuck,

   
  Welcome to the Microsoft community. Thanks for your suggestion, I will ask you post this feedback in the following link as well.
   
  Give us your comments for Windows 7.
  http://support.Microsoft.com/common/survey.aspx?scid=sw;en-us;2310&altStyle=MFE&renderOption=OverrideDefault&showPage=1&FR=1&nofrbrand=1
   
  Please let us know if you find any problem with Windows, we will be happy to help you.

• Lost all my data and Genuine Windows 8

  I had a problem in my laptop that my recovery disk has been formatted. So I went to the customer Service, they told me to format the data as my Windows has been tampered. When formatting is complete, not a single data were there in my HARD drive. Even the drivers have also been installed. I am facing problem too. My phone became useless. They said that HP will give you a real CD in Windows 8. So, how do I get my CD. Please help me. !

  Hello

  Here are a few options available.

  1. you can order a set of replacement recovery disks using the link below - it will reinstall the operating system, all the drivers, and almost all of the original software (the exception being often tests of MS Office).  They will also recreate all of the original scores, including the recovery Partition.

  Order HP recovery disks.

  2 if your laptop is originally shipped with Windows 8, the activation key is stored in the chip of the Bios, so you could create your own OEM of Windows 8 installation disc.

  For more information on how to proceed, see the 3rd post by Hüffer on the following link - Note that the download is subject to a ceiling of use, you may need to try over a period of a few hours.

  http://h30434.www3.HP.com/T5/notebook-hardware/need-product-key/m-p/2592099/highlight/false#M96668

  Best regards

  DP - K

• Data execution prevention-window Explorer error when I try to access the windows Explorer, and more particularly when I try to watch videos.

  Original title: data execution prevention-window Explorer error

  Data execution prevention launches when I try to access the windows Explorer, and more particularly when I try to watch videos. So I tried to turn off DEP for windows Explorer. Now, I can access my videos, but they all have text on them that says video PHOTO, & www.jpg.com. I have not downloaded new software recently, so I don't know where it comes from. I ran my antivirus sofware and malwarebytes, and my system is to come clean. How can I remove this from my videos? Thank you!

  This isn't how to diagnose and repair the DEP errors - especially not Windows Explorer DEP errors.

  But 6 days of inactivity and a link to an article of a MSE = automatic response.

• How to extend the volume of data in the Windows XP machine?

  Victorinox original title: space Partition:

  My C drive is almost full (110 MB only free) but my G, E, H readers have at least 23 GB of free space in each of them. SO can I do anything to divide the sapce. I know that to do something with the start menu. Can u direct me giving the steps.

  I can leave 16 GB free space in each drive and have drive C with 21 more GB of space.

  Hi AnirudhRamesh,

  You can use diskpart.exe to extend a data volume in Windows XP.
  For more information, see this link:

  How to extend a data volume in Windows Server 2003, Windows XP, in Windows 2000 and in Windows Server 2008

  http://support.Microsoft.com/kb/325590

  Note: Before moving to take backup of any important data before making changes to the system.

  Hope the helps of information.

  Please post back and we do know.

• "Closing Windows.

  I wake up about 2 times a week, with a blue screen and the "closing windows" across the middle. After that, the button to turn off the computer does not close it. I need to unplug the power cord in order to power off the computer and start again. Why is this happening? I thought it might have something to do with running updates.

  Hello

  References to Vista also apply to Windows 7.

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or
  Windows 7
  http://support.Microsoft.com/kb/929135

  Use advanced tools to solve performance problems in Windows 7
  http://www.howtogeek.com/HOWTO/6152/use-advanced-tools-to-troubleshoot-performance-problems-in-Windows-7/

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/default.aspx/GP/slow_windows_performance?p=1

  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to change, add or remove startup programs in Windows 7
  http://www.SevenForums.com/tutorials/1401-startup-programs-change.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Think about it an absolute must - manually update your drivers.

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using the methods above
  It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.