data extarneous of copy of the completed files C:\ drive. No space left for storage

Similar Questions

• Windows didn't start because the following file is missing or corrupt: < root windows > \System32|hal.dll, please reinstall a copy of the above file.

   \systrem32\hal.dll

  What can I do with this message:

  Windows didn't start because the following file is missing or corrupt: \System32|hal.dll, please reinstall a copy of the above file.

  Thank you

  In Windows XP:

  http://pcsupport.about.com/od/findbyerrormessage/a/missinghaldll.htm

  In Windows Vista & 7:

  http://pcsupport.about.com/od/errorh/a/HAL-dll-missing-Windows-7-Vista.htm

  In addition, if the file is actually missing, you can try to boot from a UNIX / Linux Live CD like Knoppix and add/replace the file manually with a file from another PC running THE SAME VERSION OF WINDOWS!

  If you are not good with computers, you should ignore this option because it could cause serious problems. If you still want to try, and there is a hal.dll file in \system32\ BACK IT UP. You have to put back in place.

  Let us know if it works.

• Windows xp hp will not start. error message: Windows has not start because the following file is missing or corrupt: < root windows > \system32\hal.dll. Please re - install a copy of the above file.

  Hello, I recently restored my windows hp tower to its factory because of virus settings and when I restarted my PC I recieced this error message: Windows has not start because the following file is missing or corrupt: \system32\hal.dll Please reinstall a copy of the above file.  where can I get a copy? and is it possible to download the start software and burn it to a cd?

  Hi FRANKGRIMES_945,

  What is the model of your computer?

  (a) you can try to arrange for a Windows XP disk that corresponds to the same edition, as it is installed on your machine.

  (b) thereafter, follow this link & check if you are able to start correctly on the desktop.

  Error message: "Windows did not start because of a configuration of the disk of the computer problem.

  Hope the helps of information.
  Please post back and we do know.

• Windows didn't start because the following file is missing or damaged: _ < root Windows > \system32\ntoskrnl.exe.__Please reinstall a copy of the above file.

  Hi the other my system was crushed, and on restarting I got this message: Windows is not start because the following file is missing or damaged:

  \System32 \ntoskrnl.exe.
  Please reinstall a copy of the above file.

  I've read a few articles online, but still I can not solve the problem. I don't want to reinstall XP or lose my information.

  can any1 give me a simple cut down on what to do (step by step).

  Thanks in advance.

  Hello Jamdutch,

  Thank you for your message.  Click HERE for instructions to perform a repair of the system installation.  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• If I copy and paste a comment in a pdf when I create a comment copied xfdf file is not included.  Is it possible to add these comments copied to the xfdf file?

  If I copy and paste a comment in a pdf when I create a comment copied xfdf file is not included.  Is it possible to add these comments copied to the xfdf file?

  Hi Steve Whipple.

  This link (Acrobat Help |) Import and export comments ) seems relevant to your query. Please let me know if it allows you to export xfdf file comments.

  Kind regards

  Rahul Tyagi

• Hi, I use Adobe Photoshop Lightroom output CC Camera Raw 9.5 2015.5. I am now with Nikon D4s shooting but the lightroom does not read the RAW format. Why? Is it possible to import the RAW files in lightroom? Thank you for your help

  Hi, I use Adobe Photoshop Lightroom output CC Camera Raw 9.5 2015.5. I am now with Nikon D4s shooting but the lightroom does not read the RAW format. Why? Is it possible to import the RAW files in lightroom? Thank you for your help

  I'm not an apple person.  I read on a few different forums that apple has changed what is called 'writing' in a recent update to apple.  You may need to find an Apple expert to show you how to make sure you are allowed to write to files or locations on your computer.

• I bought the photo Illustrator and ask the Adobe site plan for individuals with credit cards, but to date I have not received the confirmation email. How can I contact for more information on the good end of the order?

  Hello 11/18/2015 I bought Illustrator photo and ask the Adobe site plan for individuals with credit cards, but to date I have not received the confirmation email. How can I contact for more information on the good end of the order?

  Your subscription to cloud shows correctly on your account page?

  If you have more than one email, you will be sure that you use the right Adobe ID?

  https://www.adobe.com/account.html for subscriptions on your page from Adobe

  .

  If Yes

  Some general information for a subscription of cloud

  Cloud programs don't use serial... numbers you, connect you to your cloud account paying to download & install & activate... you may need to sign out of the cloud and restart your computer and log into the cloud for things to work

  Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud

  -Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html

  -http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

  -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  -http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html

  -ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp

  -http://helpx.adobe.com/creative-cloud/kb/license-this-software.html

  .

  If no

  This is an open forum, Adobe support... you need Adobe personnel to help

  Adobe contact information - http://helpx.adobe.com/contact.html

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  -Select your product and what you need help with

  -Click on the blue box "still need help? Contact us. "

• My Windows 7 Professional Office system disk has been corrupted and I took the opportunity to install a SSD for a new system disk and reinstall Windows.  The system is installed and running on the SSD, with my old drive system currently used for storage a

  My Windows 7 Professional Office system disk has been corrupted and I took the opportunity to install a SSD for a new system disk and reinstall Windows.  The system is in place and running on the SSD, with my old drive system now used for storage as it is still readable.  The only product Adobe, that I reinstalled so far is drive XI but I would like to reinstall items 8 and Acrobat 9 without occupying more licenses that both are also installed on my laptop.  Can you tell me the best way to do it?  -Thank you

  If you have two activations allocated already and one was lost on the hard drive that has failed, then you must contact the Adobe Support via chat and ask them to reset your activations.

  To the link below, click on the still need help? the option in the blue box below and choose the option to chat...

  Serial number and activation support (non - CC) chat
  http://helpx.Adobe.com/x-productkb/global/Service1.html ( http://adobe.ly/1aYjbSC )

• Automatic extension of a data file with the complete file system

  We are working on a database of Oracle10g 10.2.0.4 on HP - UX 11.31 (Itanium |) PA - RISC)
  
  We would create our database by activating the automatic Extension of our data files
  (defining the maximum size limit or unlimited)
  
  Our question is:
  What happens to the database in the event of complete file system when one of the data files should be automatically extended?
  The extended data file has become corrupted or the db cease its activity?
  
  
  Marco

  No data corruption should occur. If Oracle is trying to develop, OS it will send the message that it is not possible. That's all.

• Card data scope of device to the TDMS file buffer

  How transfer brought data card device buffer to TDMS file directly bye passing buffers LabVIEW and Windows. In the same way as DAQmx configure logging (VI) do we have any function scope?

  The API OR-SCOPE doesn't have the ability to record data acquired directly on the disc like the DAQmx API offers.  All data must be retrieved from the on-board memory, which makes data transfer OR-SCOPE kernel driver via DMA, and a copy must then happen to transfer data from the space of the kernel in user space (LabVIEW), how it can be manipulated.

  The main reason for this flow is because the calibration scale occurs in the NOR-SCOPE driver and not the material.  So if you were to save data directly to the disk as DAQmx, he stock raw ADC codes, without correction calibrated.  The API OR-SCOPE allows to recover the coefficients of scale if you want to apply them at a later date after extraction of the data from the hardware.  To optimize flow of data applications, it is recommended.

  The only exception to the logging directly on the disk would be the Oscilloscope Reconfigurable SMU-5171R.  It is being implemented with LabVIEW FPGA firmware using the design of Instrument libraries, code is open for editing.  With the open nature of this software stack, it is possible to implement "direct to TDMS" functionality with LabVIEW FPGA Read region node.

  I hope this helps!

  -Nathan

• Copy to the new file names

  When I 'copy again,' since a WAV mp3 Adobe Audition CC, the new "copy in ' file name becomes"Untitled"instead of"name of the original file. 1 "as it did in earlier versions of Audition. It's complicated organizer of files in the folder to open the file.

  Am I missing a setting somewhere that will fix this problem?

  You will have to go quite a long way toward AA 3 to see this feature. Unfortunately, he has not done it in the completely new rewrite of hearing that Adobe has done to make it cross-platform. He has not been there since CS 5.5. But this shouldn't be a problem since the new copy exists only in temporary memory until you save it any way. The best way is to do a save under a new name which will give you a new copy to work with. You need to save it in another audio format from the original in any case. You will be sure that then if you change the file and the chance to have a computer crash, you won't lose the working copy.

• Copy only the vmdk file to create a backup

  I'm totally new to VMware ESX 4, but decided to allows you to host a web server on Windows 2008 Server vm, after about two weeks of reading and the VMware ESX product testing. I have used other products virtual machine last year or so for other projects.

  Why not just copy the vmdk files to create backup vms? That is problem? I have not to perform the clone at the same time as any other vm used to create or created from the vmdk file copied. I tested with a NT4 Workstation vm, because the files are small and can be copied and moved quickly, and I didn't have problems.

  I use the Vsphere Client to copy the vmdk file to a folder at the root of the data store and then by creating a virtual machine, naming the vm the same as the folder.  I created a model of the virtual machine to w2008 use Vsphere standalone converter, but the vmdk copy is so much easier and faster that of re-run the converter again on the model should I need.

  I created a Windows Server 2008 virtual machine and want to test before installing Tomcat and MySQL. The operating system should get messed up, I thought that I could start over with just using the current vmdk file, I copied. Yet I don't trust using snapshots, etc. I have also created many Linux VM on the ESX Server for analysis of the use of Tomcat on them. I also have a XP Pro VM as an alternative to emergency. It is XP Pro on a computer that hosts the web site of Tomcat/MySQL production - slowly.

  Thank you

  Homerun

  Take a look at http://communities.vmware.com/docs/DOC-8760 for a script that can automate Virtual Machine cloning. When you start a virtual machine that has been cloned ESXi will prompt you to "I copied it" or I moved it"etc. If it is a copy, you would respond with "I copied it" and ESXi change MAC, etc. of the UUID. The only required files are files VMDK and VMX file. Others will be re-created when the machine is added to the inventory.

  In regards to the tools, I would install them. It also includes drivers to allow the host ESXi communicate with VM for things like the soft stop etc.

• Cannot associate the copy of the original file

  I have a lot of files that I created by making a copy of the original and modify.  I have the original file with no edit history.  The copy which shows the results of the edition is marked as a missing file and the change history is grayed out. The two files share the same name, except that one is a copy.  Is it possible to add a link to these files?  When I try to look for the missing file, and then point to the original, it says that the file is already linked to a file and cannot be linked to a second file. Any ideas or suggestions would be accepted with gratitude.

  Thank you for your ideas.

  Missing files must be reconnected via this procedure: http://www.computer-darkroom.com/lr2_find_folder/find-folder.htm

  After that, you can 'link' the original and copy via stacking in Lightroom (as long as they are in the same folder)

  There is no need in Lightroom to make copies first before editing. Lightroom editing is completely non-destructive and your original pixels are never changed in the file of the original photo.

• contents of the copy of the PDF file generated using Pagemaker 6.5C

  My colleague has generated a set of PDF files generated using Pagemaker 6.5C (Mac version).

  Now I want to copy the contents of PDF files (many Chinese words).

  How can not highlighted all Chinese characters, when I tried to copy them.

  Although I can highlight most of Chinese characters, I got a lot of weird as sighs "#!" "$#" but not original content.

  You say please what can I do to get the Chinese characters copied (100%)?

  Thank you very much!

  You need the exact fonts of your colleague, and even in this case, it may not work if they subset fonts in the pdf file. Your best bet is to get your colleague to copy the text for you in a format that you can use, but even in this case, you will need the fonts, pagemaker is rather limited in the fonts that can be used and required a lot of special fonts in order to work.
  Jay

• Problem by providing data to AreaChart present in the .fxml file

  I created the file .fxml using FX scene Builder AreaChart control and try to use in Netbeans.
  My problem is that I'm not able to add data to this table. When the user clicks on the button in the form, function CreateChart() is called to display the chart.
  I tried several ways, but not a good way to implement.
  
  +<!------------------------ test1.fxml-------------------------------->+
  < AnchorPane id = "AnchorPane" maxHeight = "500.0" maxWidth = "950.0" minHeight = "500.0" minWidth = "500.0" prefHeight = "574,0" prefWidth = "914.0" xmlns:fx = "http://javafx.com/fxml" fx:controller = "javafxapplication2. Sample' >
  < children >
  < label id = "label1" alignment = "CENTER" contentDisplay = 'CENTER' layoutX = "-" we 1.0 = "29.0" prefHeight = prefWidth "40.0" = "298,0" text = "Test Application" textAlignment = 'CENTER' textFill = ' #5352cc ' pointed out = "true" = "true" wrapText >
  < effect >
  < reflection / >
  < / effect >
  < font >
  < do name = "System Bold Italic' size ="24.0"/ >
  < / make >
  < rotationAxis >
  < Point3D y = z "0.5" = "4.0" / >
  < / rotationAxis >
  < / label >
  < TextField fx:id = "textField1" layoutX '55.0' = on = "109,0" opacity = "0.95" pickOnBounds = "true" prefWidth = "200,0" text = "Name" / >
  < button fx:id = 'button' layoutX '126.0' = on = "150.0" onAction = "#handleButtonAction" text = "Click Me!" / >
  < label fx:id = 'label' = "126,0" layoutX on = "180.0" minHeight = "16.0" minWidth = "150.0" prefHeight = "16.0" prefWidth = "150.0" / >
  < ProgressBar id = "progressBar1" layoutX = we "53.0" = "263.0" mouseTransparent = "true" pickOnBounds = "true" prefWidth = "200,0" / >
  < ProgressIndicator id = "progressIndicator1" layoutX '124.0' = on = "294,0" / >
  < AreaChart id = "AreaChart" fx:id = "areaChart1" = "297,0" layoutX on = "50.0" >
  < xAxis >
  < CategoryAxis id = "xAxis1" on the side of 'BOTTOM' = >
  < categories >
  < FXCollections fx:factory = "observableArrayList" / >
  < / categories >
  < / axis desabscisses >
  < / xAxis >
  < yAxis >
  < NumberAxis id = "yAxis1" side = "LEFT" / >
  < / yAxis >
  < / AreaChart >
  < / children >
  Properties of <>
  < backgroundColor >
  < "1,000" green = blue = colour opacity "0.880" = "0,698" red = "0.800" / >
  < / backgroundColor >
  < / properties >
  < / AnchorPane >
  <!---------------------------------------Sample.java---------------------------------------->
  public class Sample implements {bootable
  
  @FXML label private;
  Private @FXML TextField textField1;
  Private @FXML AreaChart areaChart1;
  @FXML private ObservableList observableArrayList;
  @FXML
  Private Sub handleButtonAction (ActionEvent event) {}
  System.out.println ("you clicked me!");
  label.setText ("Hello World!" + textField1.getText ());
  createAreaChart();
  }
  
  
  @Override
  Public Sub initialize (URL url, rb ResourceBundle) {}
  TODO
  }
  
  Public Sub createAreaChart()
  {
  areaChart1.setTitle ("monitoring the temperature (in degrees C) '");
  
  XYChart.Series seriesApril = new XYChart.Series ();
  seriesApril.setName ("April");
  seriesApril.getData () .add (new XYChart.Data (0, 4));
  seriesApril.getData () .add (new XYChart.Data (3, 10));
  seriesApril.getData () .add (new XYChart.Data (6, 15));
  seriesApril.getData () .add (new XYChart.Data (9, 8));
  seriesApril.getData () .add (new XYChart.Data (12, 5));
  seriesApril.getData () .add (new XYChart.Data (15, 18));
  seriesApril.getData () .add (new XYChart.Data (18: 15));
  seriesApril.getData () .add (new XYChart.Data (21, 13));
  seriesApril.getData () .add (new XYChart.Data (24: 19));
  seriesApril.getData () .add (new XYChart.Data (27: 21));
  seriesApril.getData () .add (new XYChart.Data (30, 21));
  
  XYChart.Series seriesMay = new XYChart.Series ();
  seriesMay.setName("May");
  seriesMay.getData () .add (new XYChart.Data (0, 20));
  seriesMay.getData () .add (new XYChart.Data (3, 15));
  seriesMay.getData () .add (new XYChart.Data (6, 13));
  seriesMay.getData () .add (new XYChart.Data (9, 12));
  seriesMay.getData () .add (new XYChart.Data (12, 14));
  seriesMay.getData () .add (new XYChart.Data (15, 18));
  seriesMay.getData () .add (new XYChart.Data (18, 25));
  seriesMay.getData () .add (new XYChart.Data (21, 25));
  seriesMay.getData () .add (new XYChart.Data (24, 23));
  seriesMay.getData () .add (new XYChart.Data (27, 26));
  seriesMay.getData () .add (new XYChart.Data (31, 26));
  
  areaChart1.getData () .addAll (seriesApril, seriesMay);
  }
  }
  
  
  Please suggest me what is the problem?

  Hello

  XYChart should be passed their axis in the constructor.
  Developer SceneBuilder preview comes with a set of elements dropable XYChart where the nature of the X axis and the Y axis is preconfigured.
  In other words, when you drop an AreaChart in SceneBuilder, the area chart is preconfigured with a NumberAxis Y and a CategoryAxis X.
  From what I see, it seems that your series requires a X NumberAxis and Y NumberAxis.

  A way to make your example work replace manually

  
  
  
  
  
  
  

  with

  
  
  

  in the FXML file. SceneBuilder should be able to happily work with such a file, it's just that at the moment the library in SceneBuilder has all XYChart configured in this way.

  Hope this helps,

  -daniel