Cannot associate the copy of the original file

Similar Questions

• Just installed CS6, but cannot associate the JPG file type with Photoshop.

  Earlier, I installed Photoshop CS6 and Lightroom 4. Types of PSD and TIFF files work fine, but I'm completely unable to associate the JPG, JPEG or any other variant with the Photoshop program, such that I can double-click on the photo file and open Photoshop and photography. I can associate JPG to bridge or Lightroom or other programs, but when I go to Photoshop, then select Photoshop.exe nothing happens, even not an error message. Does anyone have an idea what is happening here?

  Operating system is Windows 7 Ultimate, 32-bit Edition. There is 4 GB of memory in the machine, which is a Dell Vostro 1720 laptop.

  Thank you

  Bill Sexauer

  I had the same problem. Initially could only associate JPEGs PS CS5, after removing the PS CS5 I still couldn't join the 6. Fixed after running the CCleaner registry cleaner.

• iTunes can't locate my music. When I try to play a song one get an exclamation point and the message "the song could not be used because the original file cannot be found. You want to locate?

  I don't know if I am posting this in the right place. If she must be somewhere else please let me know.

  When I try to play a song I get an exclamation point next to the song and a pop up that says: "the song could not be used because the original file cannot be found. You want to locate? »

  I use Windows 10 and iTunes version 12.3.1.

  It's the path statement where the music is currently located on my hard drive:

  

  If I click on a single song from within File Explorer, it opens iTunes and the song plays without problem.

  To try to solve this problem, I went in 'Advanced' in 'Préférences' and changed the iTunes media folder location to match the location of the files on my disk hard as you can see below.

  

  Unfortunately, it did not work either. iTunes is always gives me the same message that it cannot locate the original files. I REALLY hope someone can help me finally tried for weeks to solve this problem.

  Thank you!

  Now iCloud is down, if something happens on the end of apples.

• SE error message: "the registry cannot load the hive (file) \systemroot\system32\config\software"when try to start on the original copy of Windows XP. "

  Original title: you're smarter then me. Help, please

  My windows xP home edition has crashed on my HP Pavilion a620n. Initially, I was able to get by using the original cd of the publishing house. Then it crashed again. Rebooted and pressed F8 and typed in my administrator id. This time, a cam of the screen saying that it was an ID of invaled. Re-checkeded my Id and it was OK. Put in my cd original and installed on a different partition. Problem is that I forgot to do a dual boot. Now I have two sessions of windows xp on the same partition. Am able to switch between them, but really need the original. When I click on the origianl happens with the registry cannot load the hive (file) \systemroot\system32\config\software.

  Is it possible to fix this?

  Thanks, it was a great help

• Is it possible to synchronize the copied file in the local folder with the original file in the network?

  Hello

  I copied a file from the shared network folder and it is really important document, so I need to use this file as a file off the local drive connection and backup as well just in case where the cause accidental, but I don't want to save it each time and don't want to use the original file in the network.

  Is it possible to automatically synchronize the copied file in the local folder with the original file in the network?

  Thank you

  Absolutely without interruption would require a program to write that monitors files on the file locks and triggers a sync as soon as he sees a change.  So, since we cannot just write a program, the best thing is either:

  (1) an icon on your desktop that you can click each time you want to synchronize "synchronize my files now.

  or

  (2) plan the "my sync files' to run automatically every x minutes.  It could be a batch script that checks to see if the file is more recent and copies only files that have changed.  Although perhaps a little aggressive, you could plan this thing check-and-copy-a batch file - again to run every 60 seconds.

  Batch files allow you to control the operations very directly, but Microsoft has also made a (not supported) tool called SyncToy who does all the same things, but has a graphical interface to select your options. It can be programmed to run automatically on a schedule.

• Error copying file or folder: cannot read the source file or disk.

  My problem occurs when you try to copy on the same computer I am on (or to a remote drive).  I get one of these messages in the dialog "error copying file or folder.

  box:

  Impossible to copy 'Filename': data error (cyclic redundancy check).
  Impossible to copy 'Filename': cannot read the source file or disk.

  Hey Norton victim,
  
  (a) what is your operating system?
  (b) what program file you are not able to copy?
  
  As the files are copied, Windows verifies that the data that has been copied are the same as the source files. The cyclic redundancy check (CRC) error occurs when the copied data does not match the original.
   
  This could be down to a mistake of the DVD, the disc goes wrong and has failed to 'read' the file properly or the file was placed on a bad sector on your hard drive. (Could be just down to a scratch or some marks on the dvd, maybe clean it if necessary and try again).
   
  I would run a check disk (CHKDSK) against the drive to rule that, although lacking - you have another dvd player to try the disc again? If so, try the dvd in another drive, or even a completely different machine to try to pin-point the problem.
   
  At the command prompt, type the following command and press ENTER:
   
  Chkdsk /r
   
  Note: If bad sectors are detected when running check disk utility and attempt recovery of bad sectors is verified during the verification of the drive for errors, data in the bad sector can be lost as they tried to recover bad sectors.
  
  FOR INFO:
   
  Data error (cyclic redundancy check)"Error Message When Outlook downloads E-mail
  http://support.Microsoft.com/kb/319128
   
  Aziz Nadeem - Microsoft Support

• Move file - I need prevent the original files to be moved by other users who are copying files

  I need to keep the original file cannot be deleted during a moving file.  Is there an option?

  Two suggestions:

  Solution of the authorization in function of

  • Ensure that all students have access only "limited user" to the computer.
  • Set the permission for the folder in which the files are located on 'Read only' for administrator users.
  • It is easy to do if you have XP Pro and Simple file sharing is disabled (link).  In the case against (and anyway), read more here--> http://tweakhound.com/xp/xpperm/xpPerm1.htm
  • This method fails if you have students able to crack the password for the built-in Administrator account (or the password to your account "computer administrator").

  The computer freeze

  • Install and use an application like Deep Freezeconfiguration control.  This restores the computer to a known state whenever it is restarted.
  • Of course, this won't help if A student deletes the file and student B looking for him until the computer is restarted.

• Error: "the song___ couldn't be used because the original file cannot be found. You want to locate"with Itunes

  Original title: songs from ITunes library will not play.

  Many of the songs in my ITunes library opening result in the following message: "the song___ could not serve because the original file cannot be found. You want to locate. "When I click on 'Search', none of the files are recognizable and yet does not play the song at the opening.

  I know that this isn't a matter of Windows, but some of us are always based on Apple for our music.

  Hi Allan_889,
   
  Here is an article of Apple Support that you may find useful. Follow the steps in the article and see if you can solve this problem.
  iTunes: file not found error message
   
  Note: The steps described in the article may apply to find the files of the song as well.
   
  If it doesn't, please post your request in The Forums of Apple Support for assistance.

• When you copy a file in the same folder, is it possible to choose where "copy of" add original file name?

  When you copy a file in the same folder, is it possible to choose where "copy of" add original file name?

  Someone has an idea?

  No, it is not possible.

• cannot read the source file or disc for install.wim when file copying.

  I'm doing a windows 7 bootable from a USB key, and when copying files every thing goes more except for the install.wim

  I get the error message "cannot read the source file or disk.

  I checked there is enough space on the disk, and I also tried copying from disk to my office, same question.

  I tried using the command line to move the file and get an "Access denied" error message, which I believe is the root cause as to why I can't move the file in the first place.

  Hello

  try to run the System File Checker.

  Here is the link:

  http://support.Microsoft.com/kb/929833

  It will be useful.

• Try to install the new copy off error vista WINDOWS CANNOT OPEN THE REQUIRED FILE 0x8007000D

  OT: Hey tried down laptop restore none tried to install the new copy off vista prem with no joy only error 0x8007000D WINDOWS can NOT OPEN THE REQUIRED of joy

  Portable Hi down tried restore none tried to install the new copy off vista prem with no joy only error 0x8007000D comes WINDOWS CANNOT OPEN THE REQUIRED FILE of joy

  Hi jamesgillwn,

  1. when exactly you get this error message?
  2. what disc do you use to reinstall?
  3. What is the exact error that appears when you try to start?
  4. at what point of the installation you get the error message?

  After researching the error 0x8007000D code is essentially due to file corruption and a problem with the drive itself.

  First check if you have scratches or dust on the disc and clean the surface and try again.

  To check if the disk is wrong, you will need to copy the contents of the DVD to the hard drive and try to install using that.

  Try the steps from the following link:

  Error message when you try to install Windows Vista by using the DVD drive on the computer: "Windows cannot install required files".

  http://support.Microsoft.com/kb/930984

  Note: When you perform the installation, you will lose the data, make sure that you need to backup your data before you perform the installation.

• "Cannot read the source file or disk" when copying photos

  I am train back to top/save families photographs stored on the C drive in the folder 'My photos' on an external HARD drive.
  Whenever I am trying to copy and to, I get a message saying "cannot read the source file or disk.  If I keep on pressing the button 'Try Again', he eventually some of the files copy the external HARD drive and fails on some.  There are times when I hit the "try again" Button to 30 times before it complies.
  I am logged on as administrator and am running Windows 7 on a HP laptop.  Could you help me debunk this?  I am beyond frustrated with this since I want to save precious family memories, but I am upset about windows on each attempt.
  Thank you
  Sandrine

  Hi JasjitRehsia,

  I've seen some posts where it is perhaps due to an error on the hard disk. See the article after some troubleshooting:

  http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

  I hope this helps!

• You are looking for a way to set permissions of files on a folder so that users can view and copy the files out, but may not change the original file in the folder.

  You are looking for a way to set permissions of files on a folder so that users can view and copy the files out, but may not change the original file in the folder.  They will have to copy the files in the folder to make changes and then copy a review of back in.  Locally and on the network

  Hello

  1. In Windows Explorer, right-click the file or folder you want to work with.

  2. In the context menu, select properties and then in the Properties dialog box, click the Security tab.

  3. In the name list box, select the user, contact, computer, or group to which you want to display permissions. If the permissions are grayed out, this means that the permissions are inherited from a parent object.

  https://msdn.Microsoft.com/en-us/library/bb727008.aspx?f=255&MSPPError=-2147217396

• Windows 7 can't copy files on external hard drive and keep showing "cannot read the source file or disk.

  Windows 7 can't copy files on external hard drive and keep showing "cannot read the source file or disk" HELP me PLS
  I'm going crazy because of this

  Hello

  1. What is the format of the file system on the external hard drive?

  2. are you able to copy or move files into the computer?

  You can follow the suggestions mentioned below and check with the question.

   
   
  Method 1:Delete CCG, prefetch files.
   
  Step 1: Delete Temp files

  (1) open the window run (Windows key + R)

  (2) type %temp%, and then press ENTER

  (3) delete all Temp files in the Temp folder
   
  Step 2: Delete Prefetch files

  (1) open the window run (Windows key + R)

  (2) type %temp%, and then press ENTER

  (3) delete all files in the Prefetch folder.

  Method 2: Run the tool (SFC.exe) System File Checker, try to copy the files and check.
   
  Follow the form of measures the following link: http://support.microsoft.com/kb/929833
  Method 3: Run the check disk then try to copy the files and check.
  
  Check a drive for errors
  http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors
  Note: If bad sectors are found in the hard drive then it could try to fix this particular sector. If you have any data on that, it can get lost.
   
  See also: http://support.microsoft.com/kb/976972
   
  I hope this helps!

• "could not be used because the original file cannot be found".

  Due to the use of the program duplicate Fixer of Photos on my Mac, I now have quite a few photos in Lightroom was marked as "could not be used because the original file cannot be found" and a small! mark appears on the thumbnail.

  I would like to know if I choose these photographs (more than 400 in all of my collection of approximately 20,000) by some filter? I did not understand this point, and it would be useful to follow them down (to then define as rejected and then removed from the LR catalog) without having to wade through hundreds of folders, etc.

  Suggestions for a filter would be very appreciated.

  Tony

  PS I probably shouldn't have trashed the peaks of duplicate Fixer Photos, but this is now water under the brifge...

  Use the menu command library-> find all the Photos of missing

  To fix the icon exclamation point, read the following instructions: Adobe Lightroom - find folders and files moved or missing