Data flow using two or more bands in RFSG SMU-5646R
Hello
I am a newbie in Labview. I'm trying to implement the multiplexing in frequency in Labview. Recently I tried to use two strips to transmit the text file, then I found the error in niRFSG write ARB Waveform on the FIFO session while trying to run the VI. I use Labview 2014 and SMU 5646R. Could you please tell me if the VST can be used to transmit/receive using two frequency bands at the same time? Is it possible for me to implement this FDM using SMU 5646R? Any response would be very useful for me. Thank you in advance.
Kind regards
Renita
Hi Vince,.
Thanks for posting of your code. I see what is happening here. You get errors because you're trying to generate two signals separated with 1 device at the same time. It is not possible. You need to stop/cancel completely 1 RFSG in order to start sessions to generate with the other session.
Tags: NI Hardware
Similar Questions
-
[hp-2710p]. Can I use two or more batteries ultra-slim on this computer?
I have a hp 2710p. Can I use two or more batteries ultra-slim on this computer?
I would not attach the second ultra-slim under the firt one battery?Thank you
Hey Gottlob999,
HP has a feature to double on batteries for this laptop.
THX
-
I'm under a terminal constantly reading window from a serial port running in a different thread using "Run asynchronous VI".
Towards the end of the test, I open a separate VI in another thread also uses "asynchronous Execute VI. This VI reads constantly the Ethernet packets.
I'm running the sequence in the user interface of C++ and for some reason, once in a while TestStand crashes and in the dialog box it said it
"The MFC example user interface has encountered a problem and needs to close. We are sorry for the inconvenience. »
The error signature:
AppName: testexec.exe AppVer: 4.1.1.55 ModName: msvcr80.dll
Any of you have an idea as to why he would do this? Also, what is the best way to open and close these threads?
Any help would be greatly appreciated.
-
Hello.
I have a document with some parties updated with the fusion of data (via placeholders). Is it possible to set a style of different cases for the same placeholder in the same text. See the example:
Mike runs its < < vehicule_placeholder > > in the city. But its < < VEHICULE_PLACEHOLDER > > is meant to be shared.
If the value of this placeholder in the file merger is 'bike', the sentence should be:
Mike runs his bike in the city. But his BIKE is meant to be shared.
Is this possible? How?
Thank you.
You can do it. A character style for this configuration placeholder text, set in all caps.
-
Automation and scripts data flow using ODI API AND SDK in Oracle Data Integrator (ODI) 11g
Hi team,
We have a requirement of scripts and automation of stream using ODI API and SDK. The requirement must use source ODI API and SDK to target cards in Excel (mapping map) is read and can use the SDK to create interfaces for Excel sheets. I am a novice to Groovy and Java script. Please help me on what should be the approach.
I am able to create individual objects of ODI as 'Projects', 'Models', 'Interfaces' and 'Packages' by using the 'Groovy' editor that comes with ODI 11 g.
Thank you very much in advance!
Best regards
Dos Santos.
Take a look at the post by Dave Allen who will in the sense of what you're trying to achieve:
https://blogs.Oracle.com/warehousebuilder/entry/odi_11g_interface_builder
-
Can I use two cards at the same time on the same computer?
Hello
I have two graphics cards, one is integrated, i.e. HD 2500, Intel and the other is dedicated, i.e. Nvidia Geforce GT620. My question is that can I use both at the same time on the same PC. Whenever I try to connect via a VGA cable (per processor) and DVI (via graphic card) at the same time, the screen goes black and when I take off the DVI cable, the screen will return. When I connect the DVI again after log on, there is just the theme of Windows and folders that I opened all get reduced. When I disconnect the DVI cable once again, I opened the folder displays again.I want to make use of both integrated and dedicated graphics card, I read on the internet that two graphics cards give a performance gain. Also, I'm a gamer. But in time, I bought my PC, I had no knowledge about computers. I want to use two graphics cards. Please tell me a way by which I can use two graphics cards at the same time without the problem described above.Yes, you can use two cards graphics, combined to boost performance. But it depends on a condition: the two (or more) cards must be of the same brand. To make it clearer, you can use two or more NVIDIA graphics (thanks to SLI technology) or AMD graphics (with CrossFireX technology, supports up to four graphics card in a single PC).
But, a mixture of graphics cards of different brand, as NVIDIA and AMD or NVIDIA and Intel or AMD and Intel or NVIDIA, AMD and Intel, can not be used for SLI or CrossFireX.On the black screen, please follow the following link:http://support.Microsoft.com/kb/976064 -
FabricPath or OTV between two data center using Direct fiber cable
Hello
I have two data center both of them has the same equipment N7k, N5k and N2k, and we want the dataCenter being active/active, I'm really confused to use OTV or FabricPath characteristic, if someone can help me with my scenario and explain to me what is the best solution and advantage and disadvantage between OTV and PabrcPath.
Many thanks in advance
Hi Steven,
No problem, I'll go through your points as completely as possible. I advise you to read more about these protocols, maybe if you have access to INE or similar, see their videos on this. I would also like to say again that I have not seen all documentation Cisco indicating that FabricPath to be used as a DCI.
With regard to the way fabric you ask what follows...
1. only can use it between two datacenters of you have more we can't, please correct me?
No, you can use the path of fabric with more than two data centers, but even with OTV, you can use it with more than two data centers.
2. HSRP localization can not be implemented as OTV. However You can have two differnet Gateways at the Data Center 1 and 2 using two different HSRP groups. If server is moved dynamically from, (i didn't understand this point can you please explain with example?
OK, so this is a GREAT topic. Location of HSRP CAN be implemented with OTV, but cannot be implemented with fabric path. First hop redundancy protocols can be localized and is supported by Cisco with OTV, this basically allows the same default gateway to reside in two of your data centers providing the ACTIVE/ACTIVE configuration. So no matter where your VM is, they did not change their default, even if gateway your servers to move to the other datacenter.
If we didn't have this, we would have only an active member of HSRP divided between DC and things would be extremely troublesome in regard to traffic flows. A virtual machine in DC2 VLAN needs to talk to host in VLAN B. But the default gateway is completely in DC1. So frame is sent to the ICD in DC1, then the gateway by default, routes packets VLAN B. This VLAN B lies in fact in DC2, so now it has to go all the way back to DC2. You get my point...? :)
With localization happen only local to the domain controller. If all servers / VMS in the domain controller can speak locally to its "own" default gateway.
3. unknown unicast flooding (can you give me an example?)
Unknown unicast traffic is unicast packets/images with unknown destination mac address. By default, switches are flooding this type of traffic to all ports in the VLAN. With path of fabric that would take place during your DCI, but with OTV, it is all taken care locally, so massive savings on bandwidth here and it is much more effective.
4. ARP optimization between Data Center (can you give an example regarding ARP optimization?)
There is another function of OTV, which makes it far superior on the way of tissue. Essentially, we are reducing the volume of traffic passing through the transport infrastructure (i.e. ICD)
When ARP, host in DC1 to host that responds in DC2, we use links and there is travel time of package that might be minimal, but is not the most optimal. OTV AED - or edge device spy ARP response and subsequently knows that this mapping exists from there. ARP takes place after the first Protocol, the EDA almost proxy ARP to DC1 so the ARP request locally does not have to travel to DC2.
5. Typically two flows (Odd VLANs by OTV-VDC-1 and even vlans by OTV-VDC-2) carry the entire layer 2 traffic flow between the two Data Centes. Hence the load balancing the links is not efficient. ( (can you explain compare with FabricPath if you have example?)
IMHO, it's bad and good. Balance the workload of the OTV if you have more than an AED on site. VLAN strange appointment via an AED, even numbered VLAN go through the other. Depending on traffic on VLANs, this could become unbalanced. Fabric used by all its links to mac addresses 'route' to the respective SID - ID switch she needs to do. So perhaps a better uniformity of split here.
6. VLAN scalability for OTV is lower than FabricPath as of this content writing. (can you explain what this mean i didn't understand it)
I completely disagree with this comment. I too do not understand.
7. Resiliency of FabricPath network is better than OTV in some failure scenarios.(can me an example ?)
I also disagree with that. Resilience of path of fabric could be same as OTV or perhaps better. However, my personal experience is that OTV fine tuning with things like BFD failover is much faster!
Fabric is good because the control of aircraft ISIS and its operation is admirable, but could say the same for the OTV.
Lets say one of the DCI links had to die, the transmission of the tissue path would continue through the other links, then perhaps for low latency, high frequency, environments that would be beneficial. OTV will change the EDA and re - learn mac, announced by other AEDS, addresses, but as I said, the time could be extremely minimal and tuning. This isn't a big deal, unless you need under second time convergence!
I hope that I have answered your questions, I recommend use for your DCI OTV, use the path of fabric for your inside of local switching in your DC. This has been implemented repeatedly and the links I sent you the models validated Cisco also point out.
Remember - fabric has been built to be a step towards TRILL, and replacement of protocols spanning-tree, OTV was built especially for the dci. They are both built and examples of specific design. It makes no sense to get these confused or mixed up, unless there is a real and pressing the case.
Joel conclusion is right, use the right tools for the job. If the use case is good for the FP then OK, if not, OTV.
Rcmnd - reading http://www.packetmischief.ca/2013/04/23/DCI-series-overlay-transport-vir...
These are just my thoughts.
Bilal (CCIE #45032)
-
Input module of data acquisition can be read by two or more LabVIEW vi at the same time % 3F
I use the DAQ palette in LabVIEW to read the virtual channels of the input data acquisition module. I've done several VI who read many entries of three modules of simulations. The problem appears when I run two or more VI´s reading entries from the same virtual module (for example. first.VI module 1 input ai0 and second.VI bed ai0 entry module 1 bed), when this happens the next errors are shown:
Error-50103
Platform AND Services: The specified resource is reserved. The operation could not be performed as indicated.
and
Error-200022
Resource requested by this task has already been reserved by another task.
It's worrying because I want to get the DAQ chassis and some modules, but if this problem is present with physical equipment my application may be unnecessary. This means that entry module only can be read once at the time?
I m using global variables in each Subvi to share data with main VI, however, I found the solution in a different way... I just changed to single channel and dbl sample playback mode, so I Don t need to clean up the task of reading in my subVI´s, the zeros isn´t problem here, and the six subVI´s work at the same time!
Thanks for the tips!
-
problem of data flow in the case structures (using a state machine)
Good day everyone.
I'm having a problem with the flow of data between the structures of the case.
I try to use an example of a state machine for this simple problem. but when I try to send data of a box structure to change the State of the code. It will change not in the desirable output, instead, it offers the possibility that the exit options emul.
could someone please point what I'm doing wrong here. Any kind of help would be very appreciated.
With a quick glance at your photos a question you have is that you use not data flow. You write your status updated in local variables value. Your State should pass through the case structures are a single wire. Playback of your order "Enum", happened in the register shift on the right side of your loop probably get running and reading before any processing occurs within the structure of your business. That's why you're reading the old value of the State and not the update. or have a classic case of a race condition in your code.
-
new to labview :-) and I have a problem when I want to change the value of a string in bunches, and I want to implement this using the node value of property instead of writing directly to the stream or by using the variable, enclosed is the picture. No matter, I have change in cluster (control) or value of Popery out (indicator) cluster, the value (sensor 7) dataflow keeps unchanged even I gave the new value by value of property node. Thank you to give me some advice about this.
Hi GerdW
Thanks a lot for your answer. The reason I'm stubbornly tring to break the flow of DATA is: we have a test system that have about 100 screws, they have a few connected flow, some of them will be unbundling a cluster dataflow chain to check the value in order to make the different cases. Now I want to insert user event by changing the control and influential cases during run time.
As I initially uses a global variable (to control cases) instead of unbundle string data flow, it works well. But then, I found there are a lot of screws that are using the string unbundle. One of the 'lazy' means, I tried is to change the value via the property node (because that way, I did not need to find all the places where using the unbundle string and replace them with the global variable), then I noticed a problem with "dataflow", the value in the stream of cluster in fact will not be changed by changing the value of the property node.
I did a test with VI simple (like the picture in last post), and after reading your advice, I tell myself that I need to understand the concept of "DATAFLOW" in labview, it seems that my "lazy" way can not work in this scenario.
I have attached the criterion VI here, have you furthur suggestions on what I can do in this case?
Mant thanks!
Minyi
-
Use two assistants for the acquisition of data at the same time
Hello
I want to read multiple data channels of analog inputs on my DAQ hardware. However, when I try to create two separate data acquisition assistants for each entry, it gives an error saying "is reserved for the specified resource. The operation could not be performed as indicated "." Can't use two assistants for the acquisition of data at the same time?
I have to add different channels in the same assistant DAQ? I tried, but I couldn't separate the data in different graphs.
How does this work?
Kind regards
Allard
You can't have multiple tasks of the same type (in this case inputs analog) on the same device. Just so having 1 DAQ Assistant read all your channels and separate your channels for individual transformation.
-
Can I use CC on more than two devices (I have 3 Mac and 1 PC in the House) if I deactivate those that I do not?
Thank you
Hi ingrid,.
You can use Adobe Creative cloud on 2 machines.
If you disconnect from the creative cloud on 1 machine which you use so you can activate it on another computer.
Please see the help document:
https://helpx.Adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html
Kind regards
Sheena
-
It is good to have two or more samples, replicates?
Hello world
I read somewhere in a blog it is good to have replicates more according to the number of tables that a particular schema has to achieve good performance. Is this good?
We have 150 patterns, and some of them contain spatial data. It's a windows 2008 R2 with oracle 11.2.0.3 Server
Is it ok to create two or more extracts, datapump also or just replicates is good?
What about the following scripts? what I need to add or remove anything for this?
EXTRACT EXT1
USERNAME, PASSWORD XXXXX XXXXX
EXTTRAIL/goldengate/dirdat/lt
BR BRINTERVAL 2 h
WARNLONGTRANS 1 h, 10 m CHECKINTERVAL
REPORTCOUNT EVERY 10000 RECORDS, RATE
DDL INCLUDE ALL
DDLOPTIONS ADDTRANDATA RETRYOP RETRYDELAY MAXRETRIES 10 10 &
REPORT
REPLICAT REP1
XXX OF USERNAME, PASSWORD XXXX
DISCARDFILE c:/goldengate/dirdat/rep1.dsc
ASSUMETARGETDEFS
DDL INCLUDE ALL
DEFAULT DDLERROR IGNORES RETRYOP
REPORT DDLOPTIONS
Correct me if I'm wrong.
Thanks in advance...It depends on the workload you have.
150 patterns looks like to much. If YOU have more than 1 pump/extract/replicat but attention
You must ensure that all tables that may be part of a single transaction belong to the same stream.
If the flow you get right now is that enough I wouldn't create several excerpts/pumps
However, more replicates seem to be the way forward in your case, take a look by using the @RANGE function and remember my 3rd line by separating the schemas/tables in different "streams of replication.
-
Two (or more) mp3 files for a song? can I delete one of them?
Hello world
I use iTunes 12.4.3.1 on iMac with OS X El Capitan.
I recently created a "parallel" to the MP3 playlist for a playlist with about 100 titles, because I need to burn it to CD. So far so good. No doubt, I made some kind of mistake, and now I've discovered that, for each mp3 track have have two or more files. They do NOT appear as duplicates. Duplicates show two versions of the song, such as AAC and the other in mp3 format. As in the following screenshot.
But if I select the song mp3 (the one with 160 Kbps) and click on 'Show in finder' I get the following THREE files:
The "right" one is that with time later and the '1' in the name, I know using the option "information" on the song.
so now the questions are:
(a) how it happened?
(b) is it possible to find ALL these duplicates and delete them?
(c) in the case, can I delete them manually without risk to my music library?
I am relatively new to Apple, I will be grateful for all the advice
Best regards
Claudio
(a) you can know with certainty, but my guess is that you have made a conversion like this before, and then deleted the new songs in the library after use, without deleting the corresponding files in the press kit at the same time. When iTunes tries to make a new copy by using the standard file naming scheme there is already a file it if it adds etc. '1' or '2' that required such file until it can make a new file name. (In some scenarios, it starts with "2" but I can't remember which).
(b) use file > add to library, and select the iTunes Media folder. Anything not currently connected to iTunes is added to the library. Use file > library > show duplicate items > same Album to an exact replica of the list. Sort on Date added. Remove duplicates added only today. Send messages deleted to the trash.
(c) see b). Manual removal is usually difficult and prone to error. You must be sure that the file you are deleting is not that the library is connected to. It may not always be apparent from the date or name.
There are a set of circumstances in which multiple entries of the library can be connected to a single file. If there is a risk that this then some extra to take when removing care needs, but this is not a problem in the scenario described and the given solution addresses only the physical dupes who are in the media folder and are not currently connected to iTunes.
TT2
-
30.0 Firefox is so slow since updated. IE & Chrome not having problems loading pages, showing the blank pages, need two or more tests to open Web pages. It seems to have something to do with the Visual data on the pages. My MSN homepage gets old and dies every time I open the page after the re-opening and closing of firefox. It takes forever! What is a memory drain? Each open page in a new session of firefox suffer the same fate.
Start Firefox in Safe Mode {web link}
While you are in safe mode;
Press < Alt > or < F10 > to display the toolbar.
Followed;Windows; Tools > Options
Linux; Edit > Preferences
Mac; name of the application > PreferencesThen Advanced > General.
Find and stop using hardware acceleration.Dig safe web sites and see if there is still a problem. Then restart.
Maybe you are looking for
-
I have a HP Officejet Pro 8600 + which is coming up with an error message. This just happened out of the Blue yesterday. The printer is a little older than a year. It is said: "There is a problem with the printer or ink system. Printhead not missing
-
OfficeJet Pro 8630: fax memory
When the fax of large documents, internal memory fills and cancels Telec. How can I increase the allocation of memory; or, how can I redirect storage of faxes I can fax large documents?
-
646 error code 2 update won't go through what should I do to fix this problem now?
WHAT MUST I DO FOR CODE ERROR 646 UPDATE IS COMPLETE WHY EVERYTIME I TRY TO INSTALL UPDATE I STILL MEET 646 2 UPDATE ERROR CODE DOES NOT INSTALL IS THERE A VIRUS ON MY COMPUTER HOW CAN THIS PROBLEM BE FIX NOW
-
Remove windows xp without deleting winows 7
Windows xp is no longer what I want and I have windows 7 and so I want to get rid of windows xp, then I only have windows 7 to use.
-
Is there a calendar staff function somewhere in Vista, what I can add to the desktop to quickly add and delete appointments, etc. ???