Data Modeler: how to create and use the collection type

Similar Questions

• How to create and use the database in the development of a mobile Web site?

  Hello

  I am a beginner in the creation of Mobile-based Web sites. So, please can someone help me as I want to use a database for a website of the mobile base. How can I proceed further on this issue? I know what database I use and how a connection can be made to it and using what language?

  Please do not respond.

  Thank you and best regards,

  Richa Bhatia

  If you are a Microsoft Developer, you can use ADO.NET to access the database.  This is because it is the technology on the server side and is running on the web server and not to the device.

  You can create your Web site by using one of the web technologies side server such as ASP.NET, JSP, PHP etc. Any technology that will serve up to HTML will work.

  When developing web sites for mobile devices, you will quickly realize that it is not a "one size fits all".  Each set of HTML markup will probably have to be customized for each of the mobile that you are eager to target.  And then, for each version of the operating system for mobile devices there are differences in sizes of rendering, JavaScript and HTML/CSS screen capabilities.

  My best analogy is thinking differences between desktop browsers such as IE5/6/7/8, Firefox, Chrome, Opera, Safari vX.Y.  Then multiply that by about 10 fold when it comes to differences in mobile browsers.

  Have a Web site that supports all mobile devices with a set of means HTML you'll probably adopt an approach more common denominator based on lowest mobile device features, you want to support.  The alternative is create targeted for each mobile user experiences.

• How to create and use Webservice using WSDL controls in weblogic portal10.3

  I have WSDL, how to create webservice control using WSDL in portal weblogic 10.3 and use these controls to call the Web service methods?
  Please give me the links of documents for this.
  
  Thank you
  
  Published by: user9041086 on August 12, 2010 09:26

  See the discussion below

  How to create and use Webservice using WSDL controls in weblogic portal10.3

  Thank you
  Vincent Sarvabatla

• How to activate and use the built-in webcam

  built in webcam

  How to activate and use the built in webcam on my desktop Dell Inspiron 1?

  MikeViklund,

  Try to read...

  Use and troubleshooting of the Webcam Dell and Dell Webcam Central Software

  Rick

• How to configure and use the local storage dirve and usb

  My company bought a server DMM cisco as well as 10 players of 4310 g dmp.  I tried to work on mine here to get it all working.  Let me expose what we would do first before to get into the details.

  The cental DMM will it play any content and be used to create and manage the content here at company wehre I am.  However my boss wants to send dmp individual players (4310 g) out to our factories across the country.  He wants me to be able to creat content or allow a person managing the exact address to edit the content and then push the content from the server DMM to corporate local DPM record either on local storage or attached thumb order.  I guess my questions on what are the following.

  (1) is it necessary to push the content locally for playback?  Willingness to play the content of our dmm on the wan to do lots of traffic?  Presentations could be as simple as a welcome page based presentation playing images video and flash.

  (2) based on local content would be a wise decision I'll have to see exactly how this is done poorly.  In the settings of the dmp, I see the setting of local storage and turned it on and set to read/write.  In regard to the command of thumb gose exactly how I implement that so that DPM can see?  I plug to the back of the drive, and it seems that it is active but the management console of the player I don't see anyway to actaully see if she knows the USB.

  (3) how will push the content for local storage and control of the DMM thumb?  It looks like I can send things to the storage internal if package transfer and or advanced/DPM deployment tasks or server file.  What exactly is the difference between these two?

  (4) Lastly how I actually play the local content of the dmp?  Can I set this up on a schedule of the dmm just like I would if he played the local dmm?

  I searched through the documentation, but I have not found any good docs who are clear to actually how to do these things.  So, any help would be appreciated.

  Thanks in advance.

  gec5741

  Hi Glen,

  Here are the answers to your questions

  1) is it nessesary to push the content locally for playback?  Will  playing content from our dmm over the wan be to much traffic?   Presentations could be as simple as a basic welcome page to a  presentation playing video and flash images.

  It is not required to push the content locally, you can also play the DMM directly. The main advantage of playing on the spot, is that you can transfer the videos several hours or days before the presentation begins to be played if you deploy content off hours and then, when he's ready to start playing the new presentation.

  If you play directly the content of the DMM, the content will be transferred at the time of the DMP starts playback. This may fail if the WAN link is saturated at that time here.

  2) If pushing the content local would be a wise decision I am having  difficulty seeing exactly how this is done.  In the dmp settings I see  the local storage setting and have it turned on and set to read/write.   As far as the thumb drive gose how exactly to I set that up so the dmp  can see it?  I plug it in the back of the player and it looks like it's  active but from the management console of the player I do not see any  way to actaully see if it knows about the usb thumb drive.

  You don't need to do anything to enable USB storage, simply plug it in. To confirm that the DMP is able to see it properly, the simplest way is to connect to the DPM via FTP and confirm that he has a «usb_2» directory This "usb_2" directory, where is the USB drive is mapped.

  3) how will I push the content to the local storage and the thumb drive  from the DMM?  It looks like I can send things to the internal storage  though the advanced tasks/deployment package and or file transfer to DMP  or server.  What exactly is the differnce between these two?

  The task of "File transfer" will just do this, transfer a file to the DMP. The deployment package is smarter and will transfer all the contents of a presentation and organize them in a structure that can be used to read the content locally. You should always use the deployment package.

  4) finally how will I actually play the content from the local dmp?  Can  I set this up on a schedual from the dmm just like I would if it was  playing from the local dmm?

  Yes, she may be scheduled as any other presentation.

  I suggest you have a look at the link below. He explains the steps required to configure the deployment package and read the content deployed with it.

  http://www.Cisco.com/en/us/docs/video/digital_media_systems/5_x/5_2/DMM/user/guide/DMP/CDs.html#wp2188026

  I hope everything is clear now, but if you have any questions, let me know. I'll try to answer.

  Daniel

• How to create and save the Excel file at the dam using java

  I'm trying to create an excel spreadsheet and save it in the dam. I am able to create Excel in the dam, but no data is it than excel. I use the following codes to create.

  String filename = "updatedMetadata.xls";

  FileOutputStream fos = new FileOutputStream (filename);

  Workbook WritableWorkbook is Workbook.createWorkbook (new File (filename));.

  WritableSheet writableSheet = workbook.createSheet ("update metadata", 0);

  Label = null;

  label = new Label (0, 0, "Header1");

  writableSheet.addCell (label);

  label = new Label (0, 1, "tête2");

  writableSheet.addCell (label);

  label = new Label (0, 2, "Header3");

  writableSheet.addCell (label);

  label = new Label (0, 3, "Header4");

  writableSheet.addCell (label);

  label = new Label (0, 4, "Header5");

  writableSheet.addCell (label);

  label = new Label (0, 5, "Header6");

  writableSheet.addCell (label);

  label = new Label (0, 6, "Header7");

  writableSheet.addCell (label);

  label = new Label (0, 7, "Header8");

  writableSheet.addCell (label);

  label = new Label (1, 0, "col val");

  writableSheet.addCell (label);

  label = new Label (1, 1, "col val");

  writableSheet.addCell (label);

  label = new Label (1, 2, "col val");

  writableSheet.addCell (label);

  label = new Label (1, 3, "col val");

  writableSheet.addCell (label);

  label = new Label (1, 4, "Col. val" "");

  writableSheet.addCell (label);

  label = new Label (1, 5, "col val");

  writableSheet.addCell (label);

  label = new Label (1, 6, "col val");

  writableSheet.addCell (label);

  label = new Label (1, 7, "col val");

  writableSheet.addCell (label);

  label = new Label (2, 0, "col val");

  writableSheet.addCell (label);

  label = new Label (2, 1, "col val");

  writableSheet.addCell (label);

  label = new Label (2, 2, "col val");

  writableSheet.addCell (label);

  label = new Label (2, 3, "col val");

  writableSheet.addCell (label);

  label = new Label (2, 4, ' Col. val "" ");

  writableSheet.addCell (label);

  label = new Label (2, 5, "col val");

  writableSheet.addCell (label);

  label = new Label (2, 6, "col val");

  writableSheet.addCell (label);

  label = new Label (2, 7, "col val");

  writableSheet.addCell (label);

  Workbook.Write ();

  Workbook.Close ();

  ResourceResolver resourceResolver = request.getResourceResolver ();

  AssetManager Manager = resourceResolver.adaptTo (AssetManager.class);

  InputStream is = this.getClass () .getResourceAsStream ("/ content/dam/company/fileFolder /" + filename);

  Element element = manager.createAsset ("/ content/dam/company/fileFolder /" + name of file, is, "application / vnd.ms - excel", true);

  File is created in the path "/ content/dam/company/fileFolder / '.

  The file name is "updatedMetadata.xls".

  Thanks in advance

  Mahesh Narayanan

  I found it myself. I share the code so that in the future someone else can use it.

  String filename = "updatedMetadata.xls";

  ExcelFile to the file = new File (filename);

  Workbook WritableWorkbook = Workbook.createWorkbook (excelFile);

  WritableSheet writableSheet = workbook.createSheet ("update metadata", 0);

  Label = null;

  label = new Label (0, 0, "Header1");

  writableSheet.addCell (label);

  label = new Label (0, 1, "tête2");

  writableSheet.addCell (label);

  label = new Label (0, 2, "Header3");

  writableSheet.addCell (label);

  label = new Label (0, 3, "Header4");

  writableSheet.addCell (label);

  label = new Label (0, 4, "Header5");

  writableSheet.addCell (label);

  label = new Label (0, 5, "Header6");

  writableSheet.addCell (label);

  label = new Label (0, 6, "Header7");

  writableSheet.addCell (label);

  label = new Label (0, 7, "Header8");

  writableSheet.addCell (label);

  label = new Label (1, 0, "col val");

  writableSheet.addCell (label);

  label = new Label (1, 1, "col val");

  writableSheet.addCell (label);

  label = new Label (1, 2, "col val");

  writableSheet.addCell (label);

  label = new Label (1, 3, "col val");

  writableSheet.addCell (label);

  label = new Label (1, 4, "Col. val" "");

  writableSheet.addCell (label);

  label = new Label (1, 5, "col val");

  writableSheet.addCell (label);

  label = new Label (1, 6, "col val");

  writableSheet.addCell (label);

  label = new Label (1, 7, "col val");

  writableSheet.addCell (label);

  label = new Label (2, 0, "col val");

  writableSheet.addCell (label);

  label = new Label (2, 1, "col val");

  writableSheet.addCell (label);

  label = new Label (2, 2, "col val");

  writableSheet.addCell (label);

  label = new Label (2, 3, "col val");

  writableSheet.addCell (label);

  label = new Label (2, 4, ' Col. val "" ");

  writableSheet.addCell (label);

  label = new Label (2, 5, "col val");

  writableSheet.addCell (label);

  label = new Label (2, 6, "col val");

  writableSheet.addCell (label);

  label = new Label (2, 7, "col val");

  writableSheet.addCell (label);

  Workbook.Write ();

  Workbook.Close ();

  ResourceResolver resourceResolver = request.getResourceResolver ();

  AssetManager Manager = resourceResolver.adaptTo (AssetManager.class);

  InputStream stream = new FileInputStream (excelFile);

  Element element = manager.createAsset ("/ content/dam/company/fileFolder /" + name of file, is, "application / vnd.ms - excel", true);

• How to create and use using the .csv file?

  I have one makes IAM csv file to create use... What are the steps to follow.

  I am looking for this last 3 days... .data is not updated in the database.

  I hope that iam not creating do not properly use...

  Please send to [email protected]

  Hello musunurudiadem,

  Have you tried the process in these documents?

  http://www.NI.com/white-paper/13758/en/

  http://digital.NI.com/public.nsf/allkb/AB28139F280CC3E586257563005B9664

  In the first link, if you click on the boxes of the flowchart need you for the step-by-step procedures for a different part to get data in tiara.

  As your data is in a CSV file, you may be able to use the wizard:

  http://www.NI.com/white-paper/13789/en/

  If you cannot use the wizard, here are some resources for programming your own plugin:

  http://www.NI.com/white-paper/13803/en/

  Kelsey Johnson

  Technical sales engineer

  National Instruments

• I have a Mac and a Mac home. How to create and use then the same catalog everything in at work and then at home?

  I thought the creative cloud LR so I can use the catalog even if I'm at work or at home. My photos are on a DHM who moves back with me. I don't know how to set up?

  Hi jamberry,.

  You can save your catalog on the external hard drive so that you can work on the same catalog on both machines.

• How to find and use the "disposable" email addresses

  Sometimes, I get a notice at the bottom of the screen that I can use disposable or disposable email addresses if I don't want to use my regular. I don't know how to do this in the help sections.

  You may specify where you see these messages? Firefox and Mozilla don't provide no e-mail services, but you can use something like gmail, simply create an email address at which you care and use that as a "disposable" email address.

• HP Pavilion 14-b017cl: follow-up on creating and using the USB key recovery to win 8 after replacing the bad hard drive

  I have 2 hp pavillion sleekbook model 14-b017cl'. I replaced the hard drive in my son after that she doesn't have the "optimized hard drive dst test '. I used my sleekbook work to create a USB stick recovery. I followed the instructions to use the recovery to Win 8 usb drive. When I started the laptop of my son, with the USB stick inserted, I got this message.

  PXE - m0f: exit pxe rom

  no bootable device-insert bootdisk and press a key

  Flash player Flash when I put under tension. I rebooted, you press F2, conducted an audit on the new hard drive, happened.

  Later, I inserted the recovery key in my laptop (that I used to create it) and it would not initialize to top. I checked the content to the flash drive and they seemed "Chargers", so it seems to be what I expected. It seems that the recovery USB STICK will not work if my own laptop dies. What I have to buy the HP flash drive, or I'm doing something wrong.

  Hi @gretschman7,

  Thank you for your query.

  I understand you are trying to perform a recovery from a USB flash drive, but you get the error "pxe - m0f: exit pxe rom.

  "no bootable device-insert bootdisk and press any".  You check the recovery media on your laptop as it is the same model and it seems fine.

  Looks like you may need to change the boot sequence. Here is a link to HP - performing a recovery system (Windows 8) HP computers that will help you.   Here is a link to a YouTube video which can also help:.  Performing a recovery of HP system on a laptop HP with Windows 8.

  Please let me know the results.

  Thank you for your participation in the Forums of HP! We want to help you as well as others who may encounter a similar problem as you. Please consider tagging the post in order to solve your problem as "accept as Solution" to help other members of the community!

  To show recognition for my efforts please click the Thumbs Up below.

• How to create and use a signature custom for photographs

  How can I create a stamp/brush that I can use to sign my photos?

  You use the text tool to type your signature

  Use the Quick Selection tool to select the portion of text

  Then, click the Edit Menu< go="" to="" define="" brush="">

  And save the brush with the name.

  If the brush is just presented, you can increase the size of the brush.

  Kind regards

  ~ Mohit

• How to launch and use the VMware tools

  After installing 2008r2 as a virtual machine and install VMware Tools, I am unable to open the tools and use them.  I did two days of searching, and I can't find an answer to my problem.    Downstairs is an action I took, but I would appreciate any help from the community.

  Purpose:

  Laboratory at home training and certification.

  Hardware environment: (based on "Chris Wahl" home Build Lab)

  SuperMicro Motherboard MBD-X10SLH-F-O

  Intel Xeon E3-1230 v3 3.30 GHz processor with 32 GB of ram

  Software environment:

  64-bit version of Windows 7 Professional, host operating system

  VMware Workstation 10 with all updates installed with administrator privileges

  VM #2: vSphere 5.1 install

  VM #1: The Windows 2008R2 VM I have a problem with VMware tools.

  I've deleted and rebuilt the two VM three times now, thinking it was my environment somehow.  ESXi 5.1 works although I have not built anything there yet.  I am able to access this part of the laboratory fine of vSphere Client.

  VMware Tools:

  Within the Services of VM 2008 I can see VMware Tools started service, the icon in the system tray notification area and see the files on the C: drive of the virtual computer, but there is no way to open it.

  I followed several links to create a virtual laboratory, but should not be this hard to run a program.  It's my first time that you try to use VMware tools, but I'm following the steps in the lab below install procedures.

  In the middle of the page of "Blog Editor" part 4 "build the ultimate vSphere Lab is where it installs the VMware tool and lowest after restarting Windows Update service I'm stuck to the next step."

  "Open VMware Tools, go to the Shrink ."  Click on the button of the prepare to shrink . »

  ?  How to "open the VMware Tools?

  Now on the path I have searched for and deleted and reinstalled the tools, but always without success.

  Here is a link where I found the following measures to be taken, but it doesn't work either.  The "NOTE" at the bottom, it's something I noticed and made sure was right when I installed the last time tools.

  I even found a link to where you can download the tools separately from the ISO files, and yet, it does not work.  A LITTLE HELP PLEASE!

  http://www.vdsyn.com/Windows-2008-R2-virtual-machine-VMware-tools-shows-not-running-current-after-vmotionsnapshot-operations-randomly/

  So next step that we did was
  1 uninstalled VMware Tools in the virtual machine
  2 restarted the VM
  3. manually deleted/renamed the C:\Program VMware Tools
  4. manually deleted/renamed C:\Programdata\VMware\VMware tools
  5 Rebooted
  6. install the VMware tools
  7 Rebooted

  The issue is not reproducible after the same

  
  NOTE: Make sure that the virtual computer CD player points to the correct image.  I found it always go back to the windows 7 iso image on my C: drive from physical machines to where the image 2008r2 was on drive E:

  No need to reinstall again. You're not missing something. VMware has changed the VMware Tools tray and removed options that were available in previous versions. Take a look at for example experience front of VMware: The VMware Tools GUI is gone - now what? with some information about this change and the replacement of the command line.

  André

• How to create and process the Iinteractive report with the records selected in 4.1

  Hello
  
  I want to have an interactive report that will have a check box that can be selected for processing batch in front of each line. Is it possible to do?
  If there is, please provide a method to deal with these cases, i.e. for each selected record, create a new record on another table and update the record as well as the Treaty.
  
  Thank you
  
  Published by: yannisr on July 13, 2012 05:58

  To do this, you must consult the documentation for the APEX for two things

  Create a checkboxes using APEX_ITEM API

  How to reference these boxes in a process to send

• How to configure and use the e-mail program Thunderbird files

  I need to be able to record certain emails into folders but cannot work out how to do this in Thunderbird. Help!

  Right-click on the account or local folders to create a folder.
  Right-click on a folder and create a subfolder
  If it's a pop account - it will be local but if its an IMAP create you on the server.

• Edge 40-how set up and use the built-in Wecam? It is not listed in Device Manager.

  We just bought this new advantage 40 with the built-in webcam, but it does not appear in our Device Manager, or find how to use it or put up in assistance with this.

  How can we put in place and use it?

  Thank you

  Found the problem. The software has never been installed.

  I downloaded the software from yawcam and the camera has come magically to life.