Data warehouses, the host and Cluster list

Similar Questions

• Transmission of data to the host of RT to the FPGA via DMA FIFO

  Hello

  I try to write data from a host of RT on target FPGA using DMA FIFO and then process these data and read then return of the FPGA target to the host of the CR through an another DMA FIFO. I'm working on the NI SMU chassis 1062 q, with the built-in NI SMU-8130 RT controller and target FPGA NI SMU-7965R.

  The problem I face is that I want to send three different tables, two of the same size and the third with different size, and I need one more small to be sent first to the FPGA. I tried to use encode dish with two executives in the FPGA VI. In the first image, I read and write the first table in a while loop which is finite (that is, a finite number of iterations). The second frame contains the process of reading and writing the second two tables (of the same size) in a while loop that can be finite or infinite (depending on a control). The problem is that it does not work. 2 arrays are displayed on the front panel of the RT VI host and works well, however, the table that should have been read in the first sequence does not appear on the front panel of the RT VI host. It is not sensible because if it is not passed from the host to the fpga and vice versa then the second image should not have been executed. Note that I'm wiring (-1) for the time-out period to block the while loop iterations until the passage of each item is completed. So the first while loop has only 3 iterations. Could someone help me undersdtand why this happens and how to fix this?

  I enclose a picture of the host and the fpga vi.

  Thank you.

  If you vote for my idea here and it is implemented, you can even omit the loop FOR fully.

  (I also propose the RE / IM divided inside the loop FOR and perform operations on complex table before the loop the transpose and reshape .) In this way, you only need one instance of these operations. You might even save some unnecessary allocations table in this way)

• I tried to download a pdf and convert them into excel, but the data in excellent is always to the image format.  How can I get the pdf data into the columns and rows?

  I tried to download a pdf and convert them into excel, but the data in excellent is always to the image format.  How can I get the pdf data into the columns and rows so that I can do the calculations?

  If you start the https://forums.adobe.com/welcome Forums Index

  You will be able to select a forum for the specific Adobe products you use

  Click on the symbol "arrow down" on the right (where it is said to see all our products and Services) to open the drop-down list and scroll

• How to change an effective policy in host and Cluster mode?

  HI -.

  I struggle to change policy effective default on 'Custom' in vCOPS host and Cluster view.

  I notice that I can go to the view of the group, create a group and associate a strategy with the group.
  But I don't want to use groups. I like the host and Clusters main view and prefer to be able to change an effective policy on a live cluster from this point of view.

  Possible?

  Type r

  Björn.

  Hello Björn.

  Only groups can be used to associate a policy customized to objects.

  Thank you

  Alex D.

• Configure the host and the VM on two separate wireless networks

  Hello community, I was a browser for a long time, but this will be my first post.

  I would like to begin by saying that I have always found the answer I was looking for by browsing these forums and that I browsed discussions thereon and consulted the chapters regarding virtual networks in the manual workstation 7.1, but at this stage were still unable to solve my problem.

  The scenario:

  I'm a small business working in a House (upstairs) / hookah lounge (bottom). We recently had a second internet connection (WORK), Internet home of my family (HOME), to provide our customers with a free wi - fi. I would use the connection of WORK (during our hours of downtime) in a Ubuntu VM for folding and seeding of torrents. I want to put this far on a network traffic will not affect the other.

  The network:

  SE host: Windows 7 Pro 64-bit

  (Host) NIC: Intel PRO/Wireless 3945ABG (Mini PCI)

  VM: Ubuntu 10.04 on VMWare Workstation 7.0.0 build-203739

  NIC (VM): Alfa awus036h (USB)

  
  

  The current configuration:

  Network connection is made, the State of replication physical physical network is unchecked.

  The Alfa is connected to the virtual machine and is no longer present on the list of the network adapters in Windows.

  It seems that I have to manually disable the "auto eth 1" interface or the virtual machine using the internet connection in host rather than the network of your choice that the Alfa connects to in VMWorkstation. The speed of the internet with eth auto 1 is connected is quick and consistent, but using it defeats the purpose. Strangely, when I go to network connections, under the "last use" for "eth 1 auto ' it is said 'never '.

  When "eth 1 car" is disconnected, it seems that the virtual machine uses the network wireless connected to the Alfa. But the internet speed is very slow and inconsistent. On downloads, the speed varies considerably; Also, it remains at 0 kb/s for a while before going to 80 KB/s, then works his way down to 0 kb/s again.

  Possible solutions:

  1. it's a driver problem for the Alfa inside the VM environment all this time?

  2 just misunderstood how to set up this kind of virtual network?

  3 is it possible to get the desired configuration by filling the WORK and VMnet0/1/8?

  * Note: Only VMnet1 and VMnet8 appear on the Windows network connections, however isn't VMnet0 bridged one responsible for networking?

  4. upgrade to the current version of the desktop would be useful?

  5. do this problem originally because of some settings on the router?

  * Note: The AP is close enough to provide a signal strength of 85-90%

  Sorry to be so talkative, I just wanted to be as clear as possible because I'm still a beginner to learn more about virtualization.

  Thank you in advance, as always, your help is greatly appreciated.

  First of all, I must say that when I did this last response, I've been on my Mac and I thought the configuration of a host of Windows XP however outside the nomenclature of the names of the host network settings dialog box the rest stands as it is on a host Windows 7 as described below, including a picture as an attachment.

  On a Windows 7 x 64 host with two network adapters, each on a different subnet and VMware Workstation 7.1.3 installed with the editor of virtual computer network configured for VMnet0 and VMnet2 jumpered separately to one of the host of NIC and I have not changed the settings for Windows 7 host NIC-1 and have network/Internet connectivity to the host of this NETWORK adapter as shown in the picture of Google in Internet Explorer on the host computer.  In VMware Workstation 7.1.3 I have a Linux Guest configured to use VMnet2, which is filled in the settings and the Windows 7 host NIC-2 have all with the exception of VMware Bridge Protocol unchecked and have network/Internet connectivity in the guest as indicated by Google in a browser.

  From the perspective of connectivity network between the host and the guest by NIC - 2 on the host computer when all with the exception of VMware Bridge Protocol unchecked there is no connectivity between the two on this subnet because there are no protocol at stake to allow the conversation to take place.

  So theoretically and in practice what I said previously, but didn't were not expressly with a Windows 7 host in mind, nevertheless what I said is true and accurate, as evidenced by world real test/use by what I said and with the image attached herein.

  FWIW Windows 7 has been configured with the default settings and the only changes to the host's network were those made during the installation of VMware Workstation 7.1.3 so with the configuration I discussed with the attached picture, there is no reason why the host and the guest cannot be on different physical networks and each network/Internet connectivity based on the information I have provided and they be isolated from each other by being on separate physical networks.

  That said, even if they can be isolated by being on separate physical networks can still can connectivity between the 2 through VMware shared folders it it turned on and of course & slide and other services so if absolute isolation is necessary to the point where it can be, and the guest still operating system run on a Virtual Machine in the host you would need to disable the Backdoor for VMware Tools cannot provide shared folders on VMware, & glide and other services.  So if you need this isolation level let me know and I will provide additional information to complete it.

• have the icon to download helper with video up, I have until it clicks, dosnt download or convert a number appears next to the icon and its listed in the queue draft.exe

  I was able to load videos 26 then he stopped down. I checked the preferences, the version is 4.9.24, I can see that the video is listed next to the icon, when I drag the mouse over it.

  I support download icon, when the video is running. I click next to the icon and choose the game I want, on fast download I see it loads, but no dwhelper. dosnt download or convert a number appears next to the icon and its listed in the queue draft.exe

  There is a problem with DownloadHelper Firefox 36. They are working on a new version, you can download and help test this discussion page:

  https://groups.Google.com/Forum/#! Forum/video-video downloadhelper-5

• How to get back my data for the health and the watch Apps once I've restored my phone?

  How to get back my data for the health and the watch Apps once I've restored my phone?

  From the backup, you're going to be restoration.

  If you back up to iTunes, make sure that it is an encrypted backup.

• Is it possible to create a shuttle component in Oracle ADF, where the available and selected lists are tables of the adf?

  Hi all

  
  

  We use JDeveloper Studio Edition Version 12.1.3.0.0 and deployed on GlassFish Server Open Source Edition 3.1.2.2 (build 5) and connect to the SQLServer database.

  
  

  Is it possible to create a shuttle component in Oracle ADF, where the available and selected lists are tables of the adf?

  
  

  
  

  I did a POC sample on it. I can share with you. I can't put in my dropbox because dropbox is blocked in my network. Share your email. I'll send the POC through

• Workstation 9 - slow network performance between the host and guest

  I am running windows 8 on the host and installed by 9 trial. Then installed windows 8.1 as a comment system.

  I'm a slow, very slow network between the two.

  If I send files to and from the computer with another guest, transfers are normal, but if I try the same files between the host and the guest, they are really slow.

  I use a bridge connection.

  I read elseware to disable the following on the guest card:

  Large Send Offload v2 (IPv4)

  Large Send Offload v2 (IPv6)

  But that did not help.

  Thoughts?

  Maybe then try Hyper-v, it help you better.

  report this incident to Vmware if you can

  Concerning

• Difference between the hosts and virtual machines

  Happy new year!

  I guess that's a stupid question, but I don't know the answer to it.

  I created pools from VM. Some jobs in the pool are hosts and some virtual machines. What is the difference between the hosts and virtual machines. I thought I could only create virtual machines, but I guess I could create hosts as well. -What happened?

  Thanks for your help.

  where does say desktops are hosts?  A host is usually referring to an ESXi server.  A virtual machine is just the guest OS running on the host computer.  A pool is a group of VMs that can extend over several hosts.

  Gunnar

• I upgraded from Dreamweaver CS4 to CS6. but now "a Technical error occurred - cannot connect to the host. I spent hours with the technician of the host and we can't find the error. I reinstalled DW4 and it connects to accommodate perfectly. Anyone else se

  I upgraded from Dreamweaver CS4 to CS6. but now when I want to download, I "MFP error - cannot establish a connection to the host. I spent hours with the technician of the host and we can't find the error. I reinstalled DW4 and it connects to accommodate perfectly. Anyone else seen this problem?

  Mac OS 10.8.5

  
  None of these issues are causing the error in DW CS6. We double-checked all of them and we did everything right. Also I have exactly the same SiteSetup in DW CS4 and that works perfectly well. Might need to factor 6 which did not exist in the 4? Something that is not in the SiteSetup but in a hidden dialog box?

  I can also download my host using Fetch, a third party FTP. And like I said that DW CS4 works very well. So the problem is not with my host, sound with DW CS6 in particular.

  You are most likely missing something fairly simple (some goofy box cache you in some menus random). The best way to solve this problem, without playing 20 questions...

  1 open the site in DWCS4 and go to Site > Manage Sites > export to create a your site settings .ste file.

  2. close DWCS4 and open DWCS6

  3. go to the Site > Manage Sites > Import to import the .ste file to create a new site at DWCS6

  This will create an exact copy of your CS4 settings in CS6. If it still does not work, let know us and someone should have another idea for you.

• Is it posible to allow access between the host and virtal machine without wired network?

  I want to use my laptop to show him that I did in the virtual work to other people at my home.

  However, the laptop is ofen not allowed access to the network in their office.

  Is it posible to allow access between the host and virtal machine without wired network?

  VMware player

  My virtual machine is filled to the physical network adapter and use the static IP address.

  Brad

  Setting of the virtual machine: filled

  Change that to each host only (what Continuum called VMnet1) or NAT (VMnet8).  Both use a separate virtual NETWORK card to connect the physical computer virtual host, independent of any NETWORK adapter on the host.

  ... Since the machine host (win7) could not get IP, ping fail to VM (192.168.1.5)...

  Because the connection between the guest and the host is through a separate NETWORK card, you must use the 'other' IP address.  Access a prompt on the host computer and type IPCONFIG to view the IP address of VMnet1 and VMnet8 NIC.  Then use this IP address instead of 192.168.1.5.

  And when you have changed the network management modes (i.e. of bridged to host-only), Windows does not automatically renew its IP address.  The virtual NETWORK card uses a different subnet if you need to renew your DHCP lease or change your static IP address to work with the new subnet.

• How to share an IP address between the host and the VM?

  I'm a newbie on VMWare, and I hope that this question has a simple answer... I have a physical machine, I have turned into a VM today and am now running as VM on Workstation 6.5. This physical machine had a static IP address which must remain public, but I can't get a second IP address on the same subnet of the host. How can I get static IP even stay on the virtual machine without attributing an IP address of NIC1 host?

  Or is it possible to assign static IP address to the host NIC1 use somehow fill? That seems still, however, require an IP address on the host and the guest of virtual computer.

  I also looked in NAT, but I do not know how to assign the NAT specifically to NIC1 on the host. I have NIC2 and NIC3 with different IPs on different subnets.

  Thanks in advance.

  drmuzik wrote:

  So with the bridge, the NIC host does not have an IP address?

  Well the exact answer depends on those needs specific and explicit, but assuming that the physical machine will be connected directly to the Internet and the virtual machine uses a static public IP address then the physical machine may not have a public IP address if the only one you have is assigned to the virtual machine.  This is why I said delete everything except Protocolto Bridged from VMware on the physical target network adapter.

  Yet once if you had included the host and Guest OS operating system information it helps us to be more specific with answers to questions and given that you do not I will generalize and do not take the time to explain all the scenarios possible use cases.  In a case like this one containing explicit and specific local network topology details and that it connects to the Internet may also be useful to provide more explicit and specific answers.

  In addition if you have not already read chapters 14 & 15, covering networking, workstation users manual you should as it will help provide toys better understand virtual network infrastructure.

• Disable communication between the host and the virtual machine

  I have VM Server 2.0 and one of the virtual machines has the same name as the server and even if the virtual computer is connected to the host only network it generates the Windows error message: duplicate names exist on the network.

  is there a way to disable communication between the host and the virtual machines? I just need a virtual network that is isolated from my network complete and host also.

  Thank you.

  The GUI Server2 is not to choose the other unused vmnets.  Then edit your file VMX use a different vmnet of 0, 1 or 8.  (which are bridged, host-only and NAT)

  Thus, for example, if your VMX has a line that says:

  Ethernet0.VNET = "VMNet0.

  change to:

  Ethernet0.VNET = "VMNet2.

  (This assumes that you have not used the network Editor to fill the vmnet2 either).

• How do you have a field data on the other and stay readonly?

  I am trying to create two identical forms on the same page.  The first is for the entry, and the second is a copy of the employee.  I would like to set the fields on the second form to receive the data from the first and also set the form fields second as readonly.

  It is possible. The problem is of option buttons and check boxes do not have a validate event (which is exposed) as other types of fields, it should take a different approach with them. One way is to use the mouse event to the top and the code like this:

  getField("checkbox2").value = event.target.value;

  You must do this for each button to check/radio.