Database authentication account to some users.

Similar Questions

• GANYMEDE did not windows database authentication in AD.

  I wait with Ganymede installation in our environment using windows database authentication. However, I do not understand what I have to do on the RADIUS server to pass authentication to windows on our domain database. I have already created the user account special for Ganymede advertising and chooses widows database on radius server authentication option.  Local RADIUS authentication works fine but I would use the windows database

  and does not work. Can someone help me?

  Hi Michael,

  Basically, we need more information such as ACS you run and what version AD 2003, 2008 etc... bare in mind that version 4.0 - 4.2 AVS does not work with AD 2008 R2.

  Basically, we need a few more steps:

  1.) together until a computer account and the name of cisco

  2.) implemented local policies in your windows

  3.) are you installing ACS on your domain controller or on a member server?

  4.) ensure that GBA services run with the account that you have created in AD, you must specify the account appropriate rights...

  Basically, all the stuff mentioned above are more in detail here:

  http://www.Cisco.com/en/us/customer/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.2/installation/guide/Windows/postin.html#wpxref2582

  In ACS go to:

  Database of external user > database group mapping > Windows database

  and see if you can find area in it if so it will be just a matter of mapping of the security groups in AD with ACS groups...

  Also make sure you see aaa properly like this:

  !

  AAA new-model

  !

  !

  AAA authentication login default group Ganymede + local

  AAA authorization config-commands

  AAA authorization exec default group Ganymede + authenticated if

  AAA accounting exec default start-stop Ganymede group.

  orders accounting AAA 1 by default start-stop Ganymede group.

  orders accounting AAA 15 by default start-stop Ganymede group.

  Default connection accounting AAA power Ganymede group.

  AAA accounting system default start-stop Ganymede group.

  GANYMEDE-server host GANYMEDE IP key PASSWORD

  RADIUS-server timeout 3

  RADIUS-server application made

  See you soon,.

  Fabio

• Restrict access to connect to some users

  Hello
  
  I am building an application for internal use and I need to restrict access to some users... Is it possible to do in the connection, as the authentication scheme selected is "Account data"...?
  
  
  Thank in advance for your answers!

  Have you set the condition on the connection process? Because it works fine with me.

  Process: Login
  Type: Exist (SQL query)
  Expression1: select 'x' where double: P101_USERNAME not in ("USER1", "User2")

  (can also be something like Select 'x' allowed_users where upper (username) = upper(:P101_USERNAME) )

  DickDral

• Explorer Windows has encountered a problem and needs to close, sorry for the inconvenience into account only one user. Other user accounts properly.

  This problem deals with only one of my user accounts, where the user accounts function correctly.  When my wife logs in to his user account, it receives the error "windows Explorer has encountered a problem and needs to close, sorry for the inconvenience."  No ICONS or deskbar charge upward; However, my daughter and my user account functions properly.

  I did a system successfully restore to a previous point, but the problem remains.

  If you are still having problems with Windows Explorer crashing, I suggest to consider the suggestion offered by ShadowKat:

  "Hello people, it seems that some guys out there are still having trouble with this random crashes. I have the same problem, except that it happens every time that I go to my media files on my NAS. It seems that there is a bug or something with windows that causes this problem when you access a folder to storage media like mine, especially when the size of the file is very large (archive all my discs of film there for convenience and continuous =), about 1 TB of data). Windows capable of generating thumbnail images for your files and blocks the Explorer as well.

  I solved this by going to my computer > click the "Organize" (upper-left) > folder and search options > view tab check "Show icons, never thumbnails" option and uncheck the "display file on the photos." This prevents windows to generate images and solved the problem for me. Less visually flashy Yes, but at least not need a cloth and restart is).
  Source: http://www.computertooslow.com/windows-explorer-has-stopped-working.asp
  I hope this helps and good luck!
  ShadowKat. »
   
  If you're still having problems after this, I suggest that to start a new thread in the following location:
   
  http://answers.Microsoft.com/en-us/Windows/Forum/performance
   
  I hope this helps.

• * Switching user EDITED * accounts when it not an account administrator and user switching welcome screen/fast are off.

  I really need help. I am the administrator of the computer, but I'm not connected my admin account, I am connected to a limited account. I need to change the account, but the user function is disabled, and being in a limited account, I can't turn it on. Also, when I was originally in the admin account, I tried to re - turn on the function, but he told me that I couldn't until a program has been uninstalled. Oh, and there is no welcome screen because she wasn't too. Can you help me to activate this function and return to my account or am I trapped forever, never able to access my account admin impossibility?

  * Edited question:

  My computer is a professional Windows 2000 XP laptop, and it's me signature automatically on the limited user account. I tried pressing the SHIFT key when you restart the computer, but he did that tell me there was a "stuck key" and I had to stop by pressing and continue. I don't know what was the program that appears when I tried to re - turn on the windows screen, but as soon as I can get to my admin account, I can understand. So far, the advice, they gave me did not. Any other ideas? Thank you

  You have left out some important information. What version of XP you, run Home/Pro/Media Center? Are get you connected automatically to your limited user account? If so, then hold down the SHIFT key as Windows starts. Should you get the classic login box and you can enter your own name of user and password. Once in, set the auto paper by doing the opposite of:

  Set up Windows to automatically connect (MVP Ramesh) - http://windowsxp.mvps.org/Autologon.htm

  If you want to get the welcome back screen, you will need to give the exact text of the error message and just say "a program". The difficulty depends on what "some program" is. MS - MVP - Elephant Boy computers - don't panic!

• Possible to disable cmd for some users?

  Hi, im having a problem with one of my brothers always tries to hack into windows via cmd when he is angry at someone.
  The problem is that after he did this, spit of Windows and you need to start safe mode and then collect from there.
  It's not good for the computor so I ask you; Is anyway to block some users to use the cmd program?

  Thank you

  Hi, im having a problem with one of my brothers always tries to hack into windows via cmd when he is angry at someone.
  The problem is that after he did this, spit of Windows and you need to start safe mode and then collect from there.
  It's not good for the computor so I ask you; Is anyway to block some users to use the cmd program?

  Thank you

  To run cmd, enter the administrator password.
  Change your administrator password.
  Create a user account for him without admin privileges. It cannot do any damage now.

  t-4-2

• Is it possible to prohibit the access of some users in the Panel?

  My PC running Windows 7 is used by some users.

  I want to edit group policy to deny access to users 2 Control Panel, but I don't want to change the strategy of control panel for other users.

  Is it possible to change the policy to only 2 users in admin account or do I need to log on as each account to change the policy for each user?

  Please give me some advice.

  Hello

  Your system is connected to a domain?

  The question you posted would be better suited for COMPUTING public Pro on TechNet. I would recommend posting your query in the TechNet Forums to get help:

  Windows 7 security TechNet Forums

  Let us know if you need help with Windows related issues. We will be happy to help you.

• Disabled accounts of internal users of ISE

  Hello

  I noticed this morning that, rather than the regular minimum number of users during the night on our wireless network from about 200 we had 68. Missing customers were some infusion pumps Hospira that have been set up with accounts of local user on the system, then I looked at the accounts. Most of the accounts for hospira pumps have been disabled but not all and no other accounts have been disabled, except a few that are no longer necessary and have been disabled by me.

  What could cause multiple accounts off without manual intervention?

  Thank you

  Martin

  Martin,

  You can check the user password policy settings, there is a default parameter to disable the user account after 60 days. See if you can stop this.

  Thank you

  Tarik Admani
  * Please note the useful messages *.

• How to save the password encrypted in the database using database authentication (weblogic server)

  Hi Experts,

  JDEV version 11.1.1.7.0

  I have a usecase where I use database authentication in my Application.

  However if I save the module to record user password. Its economy without encryption. Can U suggest how can I do this

  Thank you

  Roy

  Please see

  https://docs.Oracle.com/CD/E16162_01/user.1112/e17455/dev_secure_apps.htm#OJDUG1168

• Store an encrypted digital value and that the value isn't encrypted visible only some users in Apex

  
  I'm looking for a way to store a value digital encypted in a field in a table (so that it appears encrypted even for a DBA) and display the value of unencypted in the forms of the Apex and interactive reports for some users, but not others.

  Suggestions as to how I might do this?

  Thanks in advance.

  Martin

  Try these documents:

  Using masking to columns to display sensitive columns as NULL values

  Using VPD in an APEX Application

  Securing data stored using Transparent data encryption

  The features you want are characteristic of the database.

  You can use DBMS_CRYPTO for encryption of data instead of transparent data encryption, but you will need to create a package for your insert, update, delete and a view that allows the decryption based on v('APP_USER').

  Also, you will not be able to search on this column if you are using DBMS_CRYPTO.

• query not using the index for some user

  Hello
  
  I have a query that is running in less than a second for sys, system, or schema owner. However, another user (test_user) take 30 seconds to run the same query.
  
  I certainly dba and privileges identical to test_user as schmea_user, but the result is the same.
  
  I checked
  
  Select * from V$ SYS_OPTIMIZER_ENV;
  
  Both are the same for both users.
  
  I have check the plan to explain to both users. I noticed that for sys/system/schema_owner, the query uses an index, but not the test_user.
  
  All have experience the issue where a user uses an index, but not the other?
  
  Thank you for any assistance.

  Thank you for the display of formatting output, this output is much easier to read.

  One of the first things you notice about the execution plans that is for the owner non-schema "SQL_ID, 0wcs85uywn72m, number of children 1" appears in the output of DBMS_XPLAN, while "SQL_ID 0wcs85uywn72m, child number 0" (the same SQL_ID but a different number of child) appears for the schema owner. "" Whereas the SQL_ID is the same, which indicates that the client requires exactly the same SQL statement, so it's a good start.

  Then, note that in the predicate for the nonschema owner information section the following appears (sometimes with the order of the two conditions switched in position) as a condition placed on each table that is available in the schema:

  filter(("SEAL_FLAG" IS NULL OR "SEAL_FLAG"'Y'))
  

  The above suggests the presence of the virtual private database (or a superset of private database virtual) generated the predicates. You should be able to confirm that this is the case by querying V$ VPD_POLICY using the SQL_ID which was displayed in the DBMS_XPLAN output:

  SELECT
    *
  FROM
    V$VPD_POLICY
  WHERE
    SQL_ID='0wcs85uywn72m';
  

  As a test, I made a few minor adjustments to the example on this page:
  http://Antognini.ch/2011/09/optimizer_secure_view_merging-and-VPD/
  I changed the name of T to T12 and TESTUSER table specified for the schema names. I then created the function S of this page as follows:

  CREATE OR REPLACE FUNCTION s (schema IN VARCHAR2, tab IN VARCHAR2) RETURN VARCHAR2 AS
  BEGIN
    RETURN 'ID < 10';
  END;
  /
  

  I then added a couple of lines in the T12 test table:

  INSERT INTO T12 VALUES (1,1,NULL);
  INSERT INTO T12 VALUES (4,1,NULL);
  INSERT INTO T12 VALUES (10,1,NULL);
  INSERT INTO T12 VALUES (12,1,NULL);
  
  COMMIT;
  

  With an active 10053 trace, I executed the following SQL statement:

  SELECT id, pad
    FROM t12
    WHERE
    spy(id, pad) = 1
  

  The SQL_ID (in my case, found in the 10053 trace file) was 6hqw5p9d8g8wf, so I checked V$ VPD_POLICY to this SQL_ID:

  SELECT
    *
  FROM
    V$VPD_POLICY
  WHERE
    SQL_ID='6hqw5p9d8g8wf';
  
  ADDRESS          PARADDR            SQL_HASH SQL_ID        CHILD_NUMBER OBJECT_OWNER OBJECT_NAME                    POLICY_GROUP                   POLICY                 POLICY_FUNCTION_OWNER          PREDICATE
  ---------------- ---------------- ---------- ------------- ------------ ------------ ------------------------------ ------------------------------ ---------------------- ------------------------------ ------------------------------------------------------------------------------------
  000007FFB7701608 000007FFB7743350 1518838670 6hqw5p9d8g8wf            0 TESTUSER     T12                            SYS_DEFAULT                    T_SEC                  TESTUSER                       ID < 10
  

  As noted above, the VPD test function named S added the predicate "ID".< 10"="" to="" the="" sql="">

  There are not many clues in the 10053 trace file in my test VPD generated additional predicates. Trace the following was found shortly after the beginning of the file (this is the SQL statement initially presented):

  ----- Current SQL Statement for this session (sql_id=6hqw5p9d8g8wf) -----
  SELECT id, pad
    FROM t12
    WHERE
    spy(id, pad) = 1
  

  I searched then down in the trace for final after changes query file (to be noted that this sentence could be slightly different in different versions of database Oracle). That's what I found:

  Final query after transformations: ******* UNPARSED QUERY IS *******
  SELECT "T12"."ID" "ID","T12"."PAD" "PAD" FROM "TESTUSER"."T12" "T12" WHERE "TESTUSER"."SPY"("T12"."ID","T12"."PAD")=1 AND "T12"."ID"<10
  kkoqbc: optimizing query block SEL$F5BB74E1 (#0)
  

  Note that the final query after transformation shows how the final version of the query that has been rewritten by the query optimizer before the SQL statement has been executed and this version of the query includes AND "T12". "" IDENTITY CARD ".<10. if="" i="" was="" attempting="" to="" determine="" how="" that=""><10 predicate="" was="" added="" to="" the="" sql="" statement,="" i="" would="" start="" at="" the="" "current="" sql="" statement="" for"="" line="" in="" the="" trace="" file="" and="" search="" down="" the="" trace="" file="" for=""><10* -="" in="" this="" case,="" the="" following="" is="" what="" i="" found="" as="" the="" first="" search="" result,="" very="" close="" to="" the="" "current="" sql="" statement="" for"="" line="" in="" the="" trace="">

  **************************
  Predicate Move-Around (PM)
  **************************
  PM:     PM bypassed: Outer query contains no views.
  PM:     PM bypassed: Outer query contains no views.
  query block SEL$F5BB74E1 (#0) unchanged
  FPD: Considering simple filter push in query block SEL$F5BB74E1 (#0)
  "TESTUSER"."SPY"("T12"."ID","T12"."PAD")=1 AND "T12"."ID"<10
  try to generate transitive predicate from check constraints for query block SEL$F5BB74E1 (#0)
  finally: "TESTUSER"."SPY"("T12"."ID","T12"."PAD")=1 AND "T12"."ID"<10
  

  As can be seen from the above (because the predicate again appeared before and after the line containing the word "Finally: '), the AND"T12 ". "" IDENTITY CARD ".<10 predicate="" was="" already="" added="" to="" the="" original="" sql="" statement="" by="" the="" time="" the="" predicate="" move-around="" section="" of="" the="" trace="" file="" was="" written,="" and="" that="" is="" the="" first="" mention="" of=""><10 in="" the="" trace="" file.="" in="" your="" case,="" you="" would="" search="" the="" 10053="" trace="" file="">

  "SEAL_FLAG" IS NULL
  

  If V$ VPD_POLICY revealed that there are virtual private database (VPD) generated predicates applied to the SQL statement, take a look at the following article in the Oracle documentation library:
  http://docs.Oracle.com/CD/B28359_01/network.111/B28531/VPD.htm

  This article lists the different points of view, who can be interviewed to learn more about the VPD rules which are in force in the schema. For example, with my SPV test:

  SELECT
    *
  FROM
    ALL_POLICIES;
  
  OBJECT_OWNER                   OBJECT_NAME                    POLICY_GROUP                  POLICY_NAME                    PF_OWNER                       PACKAGE                       FUNCTION                       SEL INS UPD DEL IDX CHK ENA STA POLICY_TYPE              LON
  ------------------------------ ------------------------------ ----------------------------- ------------------------------ ------------------------------ ----------------------------- ------------------------------ --- --- --- --- --- --- --- --- ------------------------ ---
  TESTUSER                       T12                            SYS_DEFAULT                   T_SEC                          TESTUSER                       S                                                            YES YES YES YES NO  NO  YES NO  DYNAMIC                  NO
  

  He knows performance issues related to the use of VPD, some of which are Oracle Database version-dependent, and some have been fixed in recent versions. Take a look at the following articles if you have access to My Oracle Support:
  MetaLink (MOS) Doc ID 728292.1 ' known performance problems when you use transparent encryption data and indexes on the encrypted columns.
  MetaLink (MOS) Doc ID 967042.1 "How to investigate Query Performance regressions Caused by VPD (FGAC) predicates?"

  You might find working through the second of the above that the problem is caused by a bug in database Oracle.

  On a side note. Execution plans you have published include the 0 value in the column starts many of the operations in the execution plan. 0 indicates that the operation never actually executed. A 0 is included in the column starts on the line that includes the FULL ACCESS of TABLE of PEOPLE_TRANSACTIONS at least to the OPC. Value 123, a full table of PEOPLE_TRANSACTIONS table scan PROPERTY_CONTAINER_ID was not actually performed.

  Charles Hooper
  http://hoopercharles.WordPress.com/
  IT Manager/Oracle DBA
  K & M-making Machine, Inc.

• Some users of the problems to repaint after the 1.6.0_29 JRE

  I was unable to nail the determinant here - but we had several update their Java users moved to 1.6.0_29 after being invited by the automatic updater.
  
  For some, it's painless and just kept the work as expected with both Java applets that we use - however, for the other one of our applets began to exhibit repaint issues usually following a Javascript instantiated update.
  
  For computers that have the problem, it's easy enough to reproduce (so far, they have all be Win7) - but on others after reboot - or do a Java full uninstall (all versions) and a reinstall of 1.6.0_29 just the problem disappeared and applets are returned to work.
  
  The applet in question is a tree control that synchronizes the choice of the tree to what is projected in a substructure. A timer periodically checks whether the location of executives has changed and if it's a public call on the cmdlet to update the selection.
  
  The applet is not signed (and signing it did not help) - and the code works very well for years (we kept up to 1.1 compatibility until earlier this year).
  
  I begin to see more and more manifest: database drivers and now some relating to changes to the works of LiveScript. Given what I read these threads seem to suggest he should simply be broken-, but as it has resolved itself on a number of systems (including mine) - it feels a lot more something didn't you re-register correctly - or is damaged.
  
  There are no errors in the Java console.
  
  Any ideas? -is a known issue that I've missed?
  
  Thank you
  
  Adam

  Great to hear. 6u30 moments was just out there to oracle.com and will soon be published on java.com. A number of bugs in 6u30 were set to respond to repaint and related issues. Vs Setup offline online should have no bearing on this question. If you see that there is a different behavior between the online and offline, please let us know.

  http://www.Oracle.com/technetwork/Java/javase/downloads/index.html

  -Roger

  Edition - updated the URL

• some user names do not appear in the processes tab of task - windows, xp pro sp3 Manager

  Some user names do not appear in the Task Manager process tab.

  Process services Terminal Server is running, and I reset the Task Manager in the registry.

  Can someone please help?

  Thank you. André

  I have described at best in the original thread.

  However, I just uninstall a program that gives me a more graphic theme on my desk etc. - 7 Remix XP.  After it is uninstalled, all users appear in the Task Manager as it allows.  Obbviously Yes, I will leave out the culprit.

  Thanks for your help and your interest in my question.

  You can help me if you know something about the associations of files and program in win7 64 bit tohttp://social.answers.microsoft.com/Forums/en-US/w7programs/thread/71df3e94-7d33-42da-9e4f-6bba88e91273.

  Cordially, André

• I accidentally typed my password for the account of the user to an unencrypted page

  original title: password security

  I accidentally typed my password for the account of the user to a page that is unencrypted. The response was that the username password is incorrect, so I broke down and disconnected.  I'm worried that the password has been clearly displayed, but do not know with certainty

  Hello

  Probably won't matter if you change your password.

  Hope that helps.

• RemoteScan is not for some users

  I recently installed RemoteScan on a new machine and got all this work in one programs installed on the RDS Server. In the other program requiring analysis, RemoteScan appears only for some users. I tried to recreate the user profile. I tried to copy it to the file remote.ini of a profile that works. I tried to reinstall RemoteScan on the workstation, but so far nothing has solved the problem. I have no idea what could be the cause and was hoping that someone could have encountered the same problem. Any help would be greatly appreciated.

  RemoteScan files must be in the user homepath. These files should be as follows:

  TWAIN_32 (folder... RemoteScan internal folder)
  TWAIN_32.dll 44KO
  Twunk_32.exe

  All these RemoteScan files should be in the folder windows homepath from the user. To confirm the homepath from the user, you need to connect to the server as the user and then display a command prompt. Type set home.

  If you have questions contact RemoteScan to 406-721-0276.

  Thank you