Database is not upward after installation on OL7?

Similar Questions

• Install ONLY Vision Demo Database and NOT the new installation?

  During the process of installing Oracle Applications R12 on Oracle Enterprise Linux.
  for the database layer, the installer provides an OPTION that allows you to
  ONLY install the (demonstration of Vision database) and NOT the (new installation)?
  
  If so, can you point me to some documentation on how this is achieved and that a
  estimate on how much disk space it would require?
  
  Thank you!

  Hello

  According to the manual 'quick install', page 2-9, it says:
  DIRECT QUOTE - "you can install a new database or a database of demonstration of Vision."
  From this quote, I guess that we can install the demo database, without having to install a database of fresh PROD.
  Don't you think that my assumption is correct?

  Your assumption is correct, but you should consider that quick install will also install the application part also in addition to the database.

  You can either install a fresh database (including the part of the application), but this database is clean (no data), and usually it is used for production after you make the necessary functional configuration OR a vision of the demo database (including the part of the application), and this instance is ready for use as functional configuration is already out in the database (used for demonstration purposes).

  If you are doing a new installation--> you'll need about 90 GB (55 for the database that is clean and 35 GB of application).
  If you do a vision--> you install will need approximately 260 GB (225 for the database which includes configuration data and 35 GB of application).

  Kind regards
  Hussein

• Microsoft LifeCam does not work after installation

  Software will not launch after installation.  Running Version 3.6 on XP SP3 OS.

  Hello

  ·         Have you been able to use the cam of life on the system before?

  ·         Where you installed the software and the drivers from?

  ·         Do you have an error message when you try to run the software?

  If you try to install the drivers on the CD/DVD and then, I would you suggest to uninstall the drivers and the software that is present on the system and then download the drivers and software on the Microsoft site and then install on the system and check if the problem is solved or not.

  For Windows XP 32 bit:

  http://www.Microsoft.com/hardware/download/DownloadResult.aspx?category=ice&type=LifeCam&name=RKA-00001&OS=XPSP2x64&lang=en

  I suggest you to return the items mentioned below.

  Troubleshoot failures to find the new LifeCam hardware

  http://support.Microsoft.com/kb/929087

  Troubleshoot failures to find the new LifeCam hardware

  http://support.Microsoft.com/kb/929087

  Set the empty preview, "initialization error" or 'no camera not connected' error in the LifeCam software

  http://support.Microsoft.com/kb/933311

• I downloaded creative cloud several times, why does the Bureau not appear after installation?

  I downloaded creative cloud several times, why does the Bureau not appear after installation?

  Sure Trudi.

  The agent would be able to connect to your machine and solve the problem.

  Contact the customer service

  * Be sure to stay connected with your Adobe ID before accessing the link above *.

• LR - CC does not work after installation with creative cloud. I run a W7 64-bit system

  Hello

  LR - CC does not work after installation with creative cloud. I run a W7 64-bit system.

  I got LR 5.7 running and is not installed by the CC.

  What to do

  Thank you.

  Hi Ridder,

  Please visit the solutions proposed in the following article.

  Lightroom does not launch or closes automatically after the splash screen

  I hope this helps.

  Kind regards

  Sumit Singh

• Databases do not come after the server reboot (sun solaris).

  Hello
  
  OS - Sun OS 5.10 local zone. Version of RDBMS - 11.2.0.3
  
  Databases do not come to the top after restarting the server.
  
  We checked the points below.
  
  Cat/etc/init.d/Oracle
  File permissions $ORACLE_HOME/bin/oradism are 4550.
  lock_sga parameter is set to false.
  Cat/var/opt/oracle/oratab entries are set to Y
  
  
  Yet databases are not coming after restarting the server.
  
  Please notify.

  Did you follow this http://docs.oracle.com/cd/B19306_01/server.102/b15658/strt_stp.htm#CFAHAHGA?

• Adobe Premiere Elements does not open after installation

  Hello

  
  I've written before last week. I bought Adobe Photoshop elements 11 and Adobe Premiere elements 11.

  I had a trial version of Photoshop elements 11 and with the code I could access the full version.

  
  However, Premiere Elements did not open after installation. I have a trial version, so I downloaded the full program. I went through the installation process and everything seemed ok, no error message. But when I tried to open Adobe Premiere Elements after you restart the computer, it did not open at all. Nothing happened.
  I uninstalled and reinstalled the program for a couple of times over and over again, but no result. Also tried to download the free trial first, and also it does not work. I checked my Quicktime and updated to the latest version.

  I use a Windows laptop: Asus Intel Core i5 - 2430M, 2.4 GHz
  I hope you can help me!

  Thank you!

  Inge

  Have you seen the answer you received in post http://forums.adobe.com/thread/1226832 your course from last week ?

• New installation Photoship CS6-Bridge opens not updated after installation.

  New installation Photoship CS6-Bridge opens not updated after installation. What gives? Photoshop œuvres, mini bridge opens but does nothing.

  Hello sinner

  Please refer; http://forums.Adobe.com/message/4522770

• [Solved] pc with xp home edition as the operating system does not start after installation of SP2 via automatic updates

  Hello everyone. After formatting my hard drive I reinstalled windows xp edition sp1 family and then installed the latest version of windows update agent. I have the auto update set to download the updates automatically and notify me when they are ready to be installed. Initially, he found 3 updates that I installed and rebooted. He concluded 58 updates. Again, I've installed and restarted. After that, we found ServicePack 2, I installed as well. But after the reboot, the pc does not start. What I get is the windows xp logo which discoloures after a few seconds and I don't see a bar moving from left to right. I left it like that for 3 hours, but nothing has changed. Also, it does not start in safe mode. I get a screen with red and green vertical lines in this case. Anyone know what's the problem? I'd appreciate any help. Thank you.

  I was finally able to solve this problem. That's what I did. I reinstalled windows xp home and followed the same path (but his definition of the automatic updates notify me before downloading or installing updates) until the automatic updates found in the new service pack 2. This time that I did not choose to download it. Instead I downloaded from here http://www.microsoft.com/en-us/download/details.aspx?id=28 and then started in safe mode and installed. I don't know one that makes the difference but service pack 2 has been successfully installed this time and tha pc was able to start after installation. Before that, I also downloaded and installed the latest versions of 2 drivers through drivermax. I mention this in the case where he has also made a difference. After the service pack 2 installation and restart, automatic updates will be found a few others brought up-to-date, but after installation and reboot, it found no others. I had to visit update windows Internet explore and search for updates it and managed to find other updates and finally SP3.

• Oracle database 11 g 2 after installation

  After Server installation Oracle to run all sqlplus the following error occurred

  error while loading shared libraries: libclntsh.so.11.1

  Your problem is that you have not carefully after the pre-installation checklist. The installation program will fail very rarely, if you follow the instructions. First, review the Setup logs and see why he abandoned.

  1 see MOSC Note 1073332.1 entitled "* / usr/bin/ld: cannot find - lxml11, Genclntsh: has no link libclntsh.so.11.1.

  2. change your .bash profile to include the CLASSPATH variable

  3 - set your LD_LIBRARY_PATH environment variable to include $ORACLE_HOME/lib and path should include $ORACLE_HOME/bin:

  export LD_LIBRARY_PATH = $ORACLE_HOME/lib

  export PATH = $PATH: $ORACLE_HOME/bin

  4. the "sqlplus: error while loading shared libraries" error can occur because DBCA missed during the connection and a d - link will remedy this error:

  Oracle > $ORACLE_HOME/bin/repeat all the

  If the previous steps do not resolve the problem, you can be better start-over and re - install the Oracle software.  This time, DO NOT ignore errors and carefully follow the pre-installation

• Creating cloud Mac Download Manager will not LAUNCH after installation.

  Creative cloud Mac Download Manager App LANCERA not after installation. Nothing happens at all. (The system is an iMac: 3.1 GHz Intel Core i5 w/16 GB running ElCaptain 10.11.4)

  For Brucgonn someone else it is! I've done a lot of reading about it in both Adobe & Apple Forums and rebuilt my system the last 3 days and answer for this is very simple! I am running a 21 "4 K Retina Mac El Capitan 11.4 in 64-bit mode. Goto: Applications / Utilities / Adobe CC / CAC / Creative Cloud.app the "Get Info" and luck for the App "open in low resolution. "THIS CORRECTION IS THE PROBLEM!" Now it opens and the icon is on my top menu bar to the right.

  Adobe should add to their web support page for the Creative Cloud Manager Download Page. Have run you a Mac in high resolution (retina in 4K or 5K) you must goto the creative Cloud.app the and modify the application to open in low resolution. Or when the application installs it is watching to see what kind of Mac your race and change the App opens in correct mode.

• Ambient light 5 does not work after installation

  After installation when you try to start get "the application could not start correctly (0xc000007b)" Windows 7 Edition home premium SP1 64-bit

  http://helpx.Adobe.com/Lightroom/KB/error-Unable-start-correctly-0xc00007b.html

• Satellite Pro M30-701: TouchPad does not work after installation of XP Pro

  My touchPad does not work after reinstalling XP Pro OS with recovery disk. I install a driver for Toshiba M30 - 701 Synaptics TouchPad tpdrv-sp-m30-xp - 7920.zip

  Can you help me solve the my problem please?
  Excuse my bad English...
  Thank you
  Jorge Neto

  HI Jorge,.

  If you have reinstalled your system using the Toshiba recovery disks the touchpad should have the right drivers and be fully functional. I seem to remember that it is possible to disable the touch pad using one of the "keyboard shortcuts" (F9 on my SA30) in order to check that it has not been inadvertently pressed.

  Kind regards

• Does not start after installation of the graphics driver

  After installation of the graphics driver from Nvidia NVS 140 m on the new installation of XP Pro SP0, black screen on reboot. All solutions?

  If the minimum driver was SP2, then you must have installed. I recommend that you have installed SP3 so that all the latest patches and security patches are in place.

• Could not start after installation of Service Pack 1 - stop: 0x0000c1F5

  original title: stop: 0x0000c1F5

  my computer does not start after you install the service pak1 on my computer toshiba laptop, don't get into safe mode either I get an error message! 0xc01a001d! 3733/91430(\Registry\Machine\Componets\Derived Data...) and also the error code Stop:! 0x0000c1F5

  Stop error message when you start a Windows Vista-based computer: "0x0000C1F5".

  http://support.Microsoft.com/kb/946084

  How to get around the Stop error 0x0000C1F5 on a Windows Vista-based computer

  http://support.Microsoft.com/kb/970101

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/