HP G-522uk AMD Qhad Core 64-bit

Similar Questions

• Desktop PC's processor HP 251 - a11, Windows 10, AMD quad core A6-6310 accelerated with 4 GB memory DDR3 system and 500 GB hard drive. I installed I tunes last version and cannot operate.  Error message says Hello not activated.  Tells me to

  Desktop PC's processor HP 251 - a11, Windows 10, AMD quad core A6-6310 accelerated with 4 GB memory DDR3 system and 500 GB hard drive. I installed I tunes last version and cannot operate.  Error message says Hello not activated.  Tells me to go to the Control Panel then administrative tools and allow to Hello.  I followed these instructions, but I can't activate Hello.  What did wrong and how I can activate the Hello?  My email is * any help is greatly appreciated

  < email published by host >

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• VMWare vCenter Server runs on AMD Quad Core A8 1.9 ghz CPU, 6 GB Ram?

  I want to practice and try to Setup AMD Quad Core A8 1.9 ghz CPU, 6 GB Ram, 1 TB HD, but it gives me an error that "processor is not supported to check with your provider"

  I have the license version Win8, Samsung LEPTOP

  I use vmware workstation 9 and install win 2008 guest OS and configure vcenter server in 2008

  But it on Windows 2008 is a 64-bit version? If I remember correctly that came in 32 and 64 bit flavors.

  I recommend you to install a Windows 2008 R2 instead, coming only in 64-bit.

  Linjo

• AMD Quad-Core A8 - 4500M Turbo CORE

  Hello, I recently bought the cell phone following:

  • HP Pavilion laptop 17334 AMD A8 4 GB memory
  • Model #: 17-e118dx
  • Processor AMD Quad-Core A8 - 4500M accelerated with AMD Radeon HD 7640 G discrete graphics card class
  • AMD 8-series
  • Microprocessor: 1.9 GHz (with Turbo CORE 2.8 GHz)
  • Product number: G4X63UA

  I would like to know how to use the Turbo CORE... Or market, whatever it is. Y at - it a setting or software for that?
  Also, how can I find out about motherboard and that the processors going to? I have a 2.20 GHz processor in my old laptop HP I want to switch out if you accept it and do spin faster.

  Thank you!

  Chris

  Hi ChrisU_72,

  Thank you for visiting the Forums HP's Support and welcome. I read your thread on your HP Pavilion Notebook e118dx 17 and switchable graphics. Here is a link to a Overview of the switchable graphics. Your system will be automatically transmitted to the base of Turbo when necessary. It is not recommended to change the graphics because it could burn the graphics card.

  Thank you.

• Chipest AMD w8.1 64-bit drivers

  I want to

  Chipest AMD w8.1 64-bit drivers

  my lap is probook g1 450

  Hello

  Download, save & install the following driver, rebooting the system after installation.

  The AMD graphics driver available in the site to download your product comes with driver chipset:
  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5405424&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_124491_1%257CswEnvOID%253D4158%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  Alternatively, you can download the first file in this link:
  http://support.AMD.com/en-us/download/chipset?OS=Windows+8+-+32

  Concerning

  Visruth

• Risks for adding memory to windows AMD Turion 64 / 32 bit operating system - 2 Questions

  Can I add memory to the system of memorization of the AMD Turion 64 / 32-bit operating system, without damage to the laptop computer through Microsoft?

  Hello
  You can add memory and I suggest you to contact the manufacturer for assistance on this issue.

• Non - VT dual core 64-bit processor support

  I'm fighting with the VMWare compatibility and in general matrix processor for ESXi 4.1 needs. It will install (in box running a thin VM) on the non - VT dual core 64-bit processor as an Intel E2200 with 2 GB of RAM? Or can I * need * to install VT?

  Can I install it on the system without head the serial console?

  Thank you!

  Welcome to the community,

  It will install (in box running a thin VM) on the non - VT dual core 64-bit processor as an Intel E2200 with 2 GB of RAM? Or can I * need * to install VT?

  You can install ESXi, but you will not be able to run the 64-bit without VT support clients. With only 2 GB of RAM, you will be able to install the OS and run it, but it will not be too much RAM left for the virtual machine that you want to run.

  Can I install it on the system without head the serial console?

  What type of console is not sure. As long as you can start the installation from the CD or set the ISO as a virtual CD, you should be able to install it. You need to try. If this does not work there are other options. For example, to prepare a USB stick with ESXi, attach it to the system and the boot USB hypervisor.

  Whether or not it is possible to install and run ESXi on your system, depends not only of the CPU. There are other requirements for the material too. As the controller of disk, network cards,...

  André

• AMD vs Core I7 - which works better for Adobe products?

  I am running an AMD system (Phenom 2 x 4 3.2 Ghz, 8 GB DDR3 PC10666, ATI 3870 512 MB, Windows Ultimate 64 bit, WD 120 GB 10 k RPM)

  and I wonder if it's worth the purchase and construction of a new, intel Core i7 - 920 system. I know the top end, 970 would be better, but I don't want to drop $1 k on a processor - 920 is what I am looking at.

  I would like to know (users who have used, or who are familiar with both platforms) which powerful system with the Adobe production suite and if it is worth the investment to move from AMD to Intel. Hyper Threading does affect how AE / first made? I notice a difference in speed of 8 GB to 12/24 GB of memory (for AE / Pr)?

  I would also like suggestions on graphics cards (vs Quadro or GTX vs Radeon FireGL) to boost performance. I'm not much more than a gamer and I would like more to be able to focus on production. Right now I use a deck of cards (a former here) and I would like to know if buying a newer version will boost the performance of the AE / PR.

  Any help, advice or suggestions would be great!

  Thank you

  Drew

  I recommend Intel processors more AMD for Adobe products.

  Hyper Threading does affect how AE / first made?

  I can't speak for the first. For AE, perhaps is it marginal compared to the number of physical cores. And can be sometimes counterproductive if she tips system multiprocessing AE into believing there are twice as many hearts, because of the way that AE holders right RAM to the authorities made it starts for each core (when "Simultaneous multiple images rendering" is enabled in preferences).

  I notice a difference in speed of 8 GB to 12/24 GB of memory (for AE / Pr)?

  Yes, 8 GB is actually the absolute minimum you want for a quad core (2 GB by heart) system.

  After that, it depends on the content. For the Comps format, large source files and/or 32 HD PCB treatment, having more RAM would lead to the best performance and reliability.

  I would also like suggestions on graphics cards (vs Quadro or GTX vs Radeon FireGL) to boost performance. I'm not much more than a gamer and I would like more to be able to focus on production.

  In AE, OpenGL previews are designed to provide a smoother and more responsive experience when it interacts with the application. It won't help with rendering in most of the time. Support for high level of consumption of range card should be good. No need to sell the House for one of the models at the pro level. Keep an eye to the list of card/driver combinations officially supported.

• LabVIEW 8.6.1 AMD Multi Core Crash with call loops

  Hi all

  I tried, but I couldn't find all the messages with my exact situation.  Here it goes:

  I have a multi-core AMD Phenom 64 processor and I'm running Windows 7 64 and I am running an application in LabVIEW 8.6.1 in compatibility mode.  (I know, not a good idea)  I have a pretty complex application with several timed loops and the different ways to talk to FieldPoint (FieldPoint 6.0.6 and experimentation with Modbus talk to cFP-180 x).  You may be wondering why I'm using call loops.  It is an application of RT which can also run on Windows using structures conditional disable, etc.

  I had met sporadic crashing earlier in my files executable for more than a year and used a lvalarms.dll in only patched version my executables.  It was on a totally different processor and we were running Vista at that time.  Now, I notice a very similar behavior on 8.6.1, except now the development environment all crashes or breaks down my executable compiled as well.

  I found this KB, but he was referring to problems observed on LabVIEW 8.5, and the utility of the OS is only for Windows XP.  As recommended in the KB, I used BCDEdit to set the flag onecpu and now everything seems to work normally.  My PC is now significantly slower, however, and I wonder if there is another workaround solution that I might be able to try.

  If you have read so far and who have followed my description you already have my gratitude.  If anyone else has experienced this?  Someone at - it ideas?

  Thank you very much

  Jim

  Alright.  In case someone else runs into this apparently dark scenario, here's workaround solutions I've found:

  1. see if the problem goes away by setting the processor affinity using the Task Manager. Open the Task Manager, look under the "Processes" tab and right-click on the process. (for example LabVIEW.exe or your executable)  Under the context menu which select "set affinity...". "and select only the CPU 0.  In my case, I have a quad-core processor, so I up to four logical processors that are displayed in the dialog box that results.

  Run your application code or the executable file for a while, and if everything seems to be stable, it would seem that you have isolated the problem successfully.

  2. one of the solutions is to disable additional logical processors for the entire operating system, although there may be negative implications on performance.  In this case, try the steps in the lower part of this KB.  I have Windows 7, so I used the utility of command-line bcdedit with no problems.

  3. Finally, a really interesting option that is well worked for me should automatically set the affinity of the processor for each individual process.  There is at least a utility available to achieve this.  I've now changed my LabVIEW 8.6 shortcut to call RunFirst, which sets the processor affinity for LabVIEW to automatically use the first logical processor.  This way I can still use my processor image for all it's worth except in applications that have problems with it.

  I hope this helps someone else out there one day.

  Jim

• BL25P 392439-B21 HP - support AMD - V for 64-bit guests

  Hey all, just trying to determine if this particular creature supports 64-bit clients as consideration for Intel who has Intel virtualization technology.

  Thanks in advance!

  Hello

  AMD Opteron are 32/64 bit processors.

  AMD Opteron series 100, 200 series and 800 series is excluding AMD - V.

  BL25P 392439-B21 HP is an Opteron 275 processor. She will not allow 64-bit clients.

  Kind regards.

• AMD-FX6100 run a bit hot in HP pavilion h8m

  Hello

  My 6 h8-1100 processor runs hot when using lazy and a little warmer when slight to moderate. I can feel it just in case of feeling where the processor. I opened the case and the fan seems to barely work. Today I underclocked to 3 GHz to 3.3. but did not help much.

  I'm ready to buy a new CPU cooler and fan, but this old computer a month ago, when I received it 06/01/12.

  Or can HP help me with this problem for free?

  Thank you

  Motherboard: http://support.hp.com/us-en/document/c03117539

  Download and run CoreTemp.
  After the time that you get.

  As long as temperatures are below 60 degrees C for normal use, life is good. The max temp is 70 degrees C (from the AMD card)

• Pavilion DV7-6c23cl AMD quad core laptop there a 2nd Bay and a port?

  Hello

  I'm looking for a laptop that can accommodate two hard disks (I want a smallish SSD for the system and a conventional SATA, more great for data), I've read that at least some of the Pavilion DV7 laptops with a drive Bay 2nd (& port). Costco is currently selling an image based AMD Pavilion DV7 (dv7-6c23cl) that seems attractive. What I need to know is: has a drive Bay 2? Thank you.

  Ron

  Hello

  It has bedroom (or Bay) for a second HDD. You need a caddy for her. There are a LOT of people have done this upgrade and there are also a few videos on the net. You can Google "HP dv7 second HDD.

  Kind regards.

• HP dv6 AMD dual core 64 2.20 GHz SSD Upgrade

  Hello, I bought a HP dv6 a few years ago and now what to do an upgrade.

  and thought to put a 8 GB of RAM and a 500 GB SSD. can I do this?

  Thanks in advance.

  Yes, it takes up to 8 GB of RAM

• Four-core 64-bit VISTA system does not restart after the latest updates

  My system does not at all now after SP2. It won't even load of recovery disks cannot get sytem to work repairing or family name known good config, etc..

  If you need a copy of the DVD, go to this link and download the image.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/
  Kind regards

  Today, it was a good day, I didn't have to use my AK.

• HP dv6t Quad Edition - accelerated processor AMD Quad-Core A8 - 3520M (2.5GHz/1.6GHz, 4 MB L2 Cache)

  I paid for the aforementioned processor. However I noticed that the CPU clock not more than 1.5 GHz. How to unlock its full potential of 2.5 GHz.

  It should work at 1600 mhz and 2500 mhz band is the «Turbo» speed You are unlikely to capture turbo speed in action. It will kick only when necessary and only for saccades. There's really nothing that you need to worry, you have a powerful processor.