DataFile recovery not to repair corrupted block
HelloTowing of data files are corrupt data block and recovery of files not repairing block corruption.
sql 'alter database datafile 2, 8 offline';
restore datafile 2, 8;
recover datafile 2, 8;
sql 'alter database datafile 2, 8 online';
The media recovery complete successfully without warning.But, after recovery when I try:
validate check logical datafile 8,2;
It shows again block corruptions. I tried several times to recovery, and the same appears when I query V$ database_block_corruption.I also tried the same thing with RMAN > failure of the repair and the result is always the same.
I tried RMAN incremental and full after that it and two of them have not
ORA-00600: internal error code, arguments: [17114], [0x2B58288E0BB8], [], [], [], [], [], []
ORA-00600: internal error code, arguments: [17147], [0x2B58288E0BB8], [], [], [], [], [], []
It seems that the data files are not recovered and block corruption after the restoration and recovery.An of this datafile is sysaux. and the version of DB is g 11, standard edition.
BANNER
Oracle Database 11g Release 11.1.0.6.0 - 64bit Production
PL/SQL Release 11.1.0.6.0 - Production
CORE 11.1.0.6.0 Production
TNS for Linux: Version 11.1.0.6.0 - Production
NLSRTL Version 11.1.0.6.0 - Production
Thank youPublished by: najet 11 June 2010 20:05
Published by: najet June 11, 2010 20:11
I suggest you to contact the Oracle Support
Tags: Database
Similar Questions
-
Heyo. Im running windows 8, with about 2000 (I think) corrupted files that it contains. /sfc scannow does not fix any of them. /DISM / /restorehealth/cleanup-image online doesn't solve all these either. I can't update or repair my laptop due to files is corrupt, and all updates (about 52 GB worth of updates accumulate) do not install. I need to solve this problem, because I want to sell this laptop, it is in perfect condition except for these problems. I tried hundreds of ways to solve this problem, and none of them worked. Even tried installing the trial evaluation copy Windows 8.1 to reset my pc, but not even that would install. IM in need you guys. I'd love any help that I can get and will be willing to give something (other than money) if requested :)
Laptop comes with windows pre-installed 8. Need update windows 8.1 update, but it does not.
Thanks in advance.
Seems to me that your best bet is to contact your computer support and request a set of Recovery Disks.Note that there is usually a small fee for these expenses. Hope this helps and if you need another post to help and we will be happy to help you.
The above opinion is mine and mine nothing and does not necessarily reflect that of Microsoft, it's employees, or any other Member of this forum.
"When we try to take anything by itself, we find it hitched to everything else in the universe." -John Muir
-
Currently, I have Windows 7 and had to buy Windows 8 for the school. I tried downloading it several times, but when she writes the check, it is said, "Download unsuccessful. The download task has not completed. The new attempt at repair by block limit has been exceeded. The file is corrupted. »
I don't know what to do.
Original title: download Windows 8 Windows 7
Hello Travis,
Thanks for posting your question on the Forums of community of Microsoft.
To better understand the issue please help us with these questions.
from which site you try to download Windows 8?
b. what browser do you use to download?
c. you try to download a full version or update?
d. you run the upgrade wizard before trying to download the Windows 8?
This problem usually occurs due to the installation of Web the contents of the folder in the system. So, now, I you suggest to rename or delete the installation folder to the following location and then try to download Windows 8:
C:\Users\
\AppData\Local\Microsoft\Web install See also the link mentioned to follow the correct steps before and during the installation of Windows 8 below:
How to upgrade to Windows 8Note: I strongly recommend to back up all your important files and folders on an external storage device before performing any type of upgrade of the OS.
Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.
-
maxcorrupt is marked or not marked corrupt blocks?
Hello
Documentation says:
"You can use the SET MAXCORRUPT command to set the total number of * not * corruptions permitted in a file for RMAN backups." The default value is 0, which means that RMAN does not tolerate corrupt blocks trivialized whatsoever.
If the MAXCORRUPT limit is exceeded when RMAN meeting marked a * non * corrupt block during a backup, then RMAN terminates the backup. Otherwise, RMAN writes the corrupt block newly detected at the backup with a special header that indicates that the block is marked corrupt. »
So, I did the following test:
backup database and everything is correct, no corrupt blocks.
corrupt a block using "dd".
backup database and is not caused by the corrupted block.
Make sure that the block is marked as corrupted.
Try saving again, but it fails when it is supoused to work because the block is marked as corrupted.
The only way to save the database uses "maxcorrupt.
The documentation is wrong or I'm doing something wrong?
Test case:
Thank you#/home/oracle> rman target / Recovery Manager: Release 11.2.0.1.0 - Production on Fri May 14 11:42:01 2010 Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved. connected to target database: O11R2 (DBID=3441786850) RMAN> backup database; Starting backup at 14-MAY-10 using target database control file instead of recovery catalog allocated channel: ORA_DISK_1 channel ORA_DISK_1: SID=33 device type=DISK channel ORA_DISK_1: starting full datafile backup set channel ORA_DISK_1: specifying datafile(s) in backup set input datafile file number=00001 name=/disco11g/oradata/o11r2/system01.dbf input datafile file number=00002 name=/disco11g/oradata/o11r2/sysaux01.dbf input datafile file number=00005 name=/disco11g/oradata/o11r2/example01.dbf input datafile file number=00006 name=/disco11g/oradata/o11r2/prueba.dbf input datafile file number=00003 name=/disco11g/oradata/o11r2/undotbs01.dbf input datafile file number=00004 name=/disco11g/oradata/o11r2/users01.dbf channel ORA_DISK_1: starting piece 1 at 14-MAY-10 channel ORA_DISK_1: finished piece 1 at 14-MAY-10 piece handle=/disco11g/flash_recovery_area/O11R2/backupset/2010_05_14/o1_mf_nnndf_TAG20100514T114210_5yt6qmhm_.bkp tag=TAG20100514T114210 comment=NONE channel ORA_DISK_1: backup set complete, elapsed time: 00:03:02 channel ORA_DISK_1: starting full datafile backup set channel ORA_DISK_1: specifying datafile(s) in backup set including current control file in backup set including current SPFILE in backup set channel ORA_DISK_1: starting piece 1 at 14-MAY-10 channel ORA_DISK_1: finished piece 1 at 14-MAY-10 piece handle=/disco11g/flash_recovery_area/O11R2/backupset/2010_05_14/o1_mf_ncsnf_TAG20100514T114210_5yt6xc21_.bkp tag=TAG20100514T114210 comment=NONE channel ORA_DISK_1: backup set complete, elapsed time: 00:00:02 Finished backup at 14-MAY-10 RMAN> exit Recovery Manager complete. #/home/oracle> dd if=/dev/zero of=users01.dbf bs=8k conv=notrunc seek=526 count=1 1+0 records in 1+0 records out 8192 bytes (8.2 kB) copied, 0.00570121 seconds, 1.4 MB/s #/home/oracle> rman target / Recovery Manager: Release 11.2.0.1.0 - Production on Fri May 14 11:46:12 2010 Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved. connected to target database: O11R2 (DBID=3441786850) RMAN> backup database; Starting backup at 14-MAY-10 using target database control file instead of recovery catalog allocated channel: ORA_DISK_1 channel ORA_DISK_1: SID=44 device type=DISK channel ORA_DISK_1: starting full datafile backup set channel ORA_DISK_1: specifying datafile(s) in backup set input datafile file number=00001 name=/disco11g/oradata/o11r2/system01.dbf input datafile file number=00002 name=/disco11g/oradata/o11r2/sysaux01.dbf input datafile file number=00005 name=/disco11g/oradata/o11r2/example01.dbf input datafile file number=00006 name=/disco11g/oradata/o11r2/prueba.dbf input datafile file number=00003 name=/disco11g/oradata/o11r2/undotbs01.dbf input datafile file number=00004 name=/disco11g/oradata/o11r2/users01.dbf channel ORA_DISK_1: starting piece 1 at 14-MAY-10 RMAN-03009: failure of backup command on ORA_DISK_1 channel at 05/14/2010 11:46:26 ORA-19566: exceeded limit of 0 corrupt blocks for file /disco11g/oradata/o11r2/users01.dbf continuing other job steps, job failed will not be re-run channel ORA_DISK_1: starting full datafile backup set channel ORA_DISK_1: specifying datafile(s) in backup set including current control file in backup set including current SPFILE in backup set channel ORA_DISK_1: starting piece 1 at 14-MAY-10 channel ORA_DISK_1: finished piece 1 at 14-MAY-10 piece handle=/disco11g/flash_recovery_area/O11R2/backupset/2010_05_14/o1_mf_ncsnf_TAG20100514T114619_5yt6zmxp_.bkp tag=TAG20100514T114619 comment=NONE channel ORA_DISK_1: backup set complete, elapsed time: 00:00:01 RMAN-00571: =========================================================== RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS =============== RMAN-00571: =========================================================== RMAN-03009: failure of backup command on ORA_DISK_1 channel at 05/14/2010 11:46:26 ORA-19566: exceeded limit of 0 corrupt blocks for file /disco11g/oradata/o11r2/users01.dbf RMAN> exit Recovery Manager complete. #/home/oracle> sqlplus system/oracle SQL*Plus: Release 11.2.0.1.0 Production on Fri May 14 11:46:38 2010 Copyright (c) 1982, 2009, Oracle. All rights reserved. Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production With the Partitioning, Oracle Label Security, Oracle Database Vault and Real Application Testing options SQL> select * from V$DATABASE_BLOCK_CORRUPTION; FILE# BLOCK# BLOCKS CORRUPTION_CHANGE# CORRUPTIO ---------- ---------- ---------- ------------------ --------- 4 526 1 0 ALL ZERO SQL> exit Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production With the Partitioning, Oracle Label Security, Oracle Database Vault and Real Application Testing options #/home/oracle> rman target / Recovery Manager: Release 11.2.0.1.0 - Production on Fri May 14 11:47:04 2010 Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved. connected to target database: O11R2 (DBID=3441786850) RMAN> exit Recovery Manager complete. #/home/oracle> rman target / Recovery Manager: Release 11.2.0.1.0 - Production on Fri May 14 11:47:34 2010 Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved. connected to target database: O11R2 (DBID=3441786850) RMAN> backup database; Starting backup at 14-MAY-10 using target database control file instead of recovery catalog allocated channel: ORA_DISK_1 channel ORA_DISK_1: SID=47 device type=DISK channel ORA_DISK_1: starting full datafile backup set channel ORA_DISK_1: specifying datafile(s) in backup set input datafile file number=00001 name=/disco11g/oradata/o11r2/system01.dbf input datafile file number=00002 name=/disco11g/oradata/o11r2/sysaux01.dbf input datafile file number=00005 name=/disco11g/oradata/o11r2/example01.dbf input datafile file number=00006 name=/disco11g/oradata/o11r2/prueba.dbf input datafile file number=00003 name=/disco11g/oradata/o11r2/undotbs01.dbf input datafile file number=00004 name=/disco11g/oradata/o11r2/users01.dbf channel ORA_DISK_1: starting piece 1 at 14-MAY-10 RMAN-03009: failure of backup command on ORA_DISK_1 channel at 05/14/2010 11:48:50 ORA-19566: exceeded limit of 0 corrupt blocks for file /disco11g/oradata/o11r2/users01.dbf continuing other job steps, job failed will not be re-run channel ORA_DISK_1: starting full datafile backup set channel ORA_DISK_1: specifying datafile(s) in backup set including current control file in backup set including current SPFILE in backup set channel ORA_DISK_1: starting piece 1 at 14-MAY-10 channel ORA_DISK_1: finished piece 1 at 14-MAY-10 piece handle=/disco11g/flash_recovery_area/O11R2/backupset/2010_05_14/o1_mf_ncsnf_TAG20100514T114848_5yt743qq_.bkp tag=TAG20100514T114848 comment=NONE channel ORA_DISK_1: backup set complete, elapsed time: 00:00:02 RMAN-00571: =========================================================== RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS =============== RMAN-00571: =========================================================== RMAN-03009: failure of backup command on ORA_DISK_1 channel at 05/14/2010 11:48:50 ORA-19566: exceeded limit of 0 corrupt blocks for file /disco11g/oradata/o11r2/users01.dbf RMAN> run { 2> set maxcorrupt for datafile 4 to 1; 3> backup database; 4> } executing command: SET MAX CORRUPT Starting backup at 14-MAY-10 using channel ORA_DISK_1 channel ORA_DISK_1: starting full datafile backup set channel ORA_DISK_1: specifying datafile(s) in backup set input datafile file number=00001 name=/disco11g/oradata/o11r2/system01.dbf input datafile file number=00002 name=/disco11g/oradata/o11r2/sysaux01.dbf input datafile file number=00005 name=/disco11g/oradata/o11r2/example01.dbf input datafile file number=00006 name=/disco11g/oradata/o11r2/prueba.dbf input datafile file number=00003 name=/disco11g/oradata/o11r2/undotbs01.dbf input datafile file number=00004 name=/disco11g/oradata/o11r2/users01.dbf channel ORA_DISK_1: starting piece 1 at 14-MAY-10 channel ORA_DISK_1: finished piece 1 at 14-MAY-10 piece handle=/disco11g/flash_recovery_area/O11R2/backupset/2010_05_14/o1_mf_nnndf_TAG20100514T114930_5yt75cb1_.bkp tag=TAG20100514T114930 comment=NONE channel ORA_DISK_1: backup set complete, elapsed time: 00:01:35 channel ORA_DISK_1: starting full datafile backup set channel ORA_DISK_1: specifying datafile(s) in backup set including current control file in backup set including current SPFILE in backup set channel ORA_DISK_1: starting piece 1 at 14-MAY-10 channel ORA_DISK_1: finished piece 1 at 14-MAY-10 piece handle=/disco11g/flash_recovery_area/O11R2/backupset/2010_05_14/o1_mf_ncsnf_TAG20100514T114930_5yt78fqt_.bkp tag=TAG20100514T114930 comment=NONE channel ORA_DISK_1: backup set complete, elapsed time: 00:00:01 Finished backup at 14-MAY-10
Joaquin GonzalezSelect * from V$ DATABASE_BLOCK_CORRUPTION;
only the brand as a corrupted block. This simply shows that the block was found to be corrupt.
the marking is of DBMS_REPAIR. FIX_CORRUPT_BLOCKS
See http://download.oracle.com/docs/cd/E11882_01/appdev.112/e10577/d_repair.htm#CHDGBBEG
Hemant K Collette
http://hemantoracledba.blogspot.com -
SFC/scannow found he could not repair corrupted files
Running Windows7 32 Bit
Found several Pots every 5 to 7 years in which this issue; hoping that there may be a newer better way to solve the problem... so seconded and fingers crossed.
* PC froze
* Powered off / Powered it back on
* Selected Normal boot started fine on the desktop PC
Decided to run sfc/scannow. "At the end it read: Windows resource Protection found damaged, files but was unable to solve some of them.
Looked at the log CBS.log file. It might take some time to review and even if I saw it that I would not be able to choose the corrupted files, nor know how to find and replace... and don't know if I was smart enough for that I could even remove and replace the files of the operating system.
I realize I've read in some real old Posts on this topic, maybe some corrupt files are not really necessary or important... but I'd rather have a good job of OS.
So is there a way to better\newer to resolve this issue... instead of finding what could be one is necessary in the files of the boot of Hay, then looking for right files to replace those damaged?
I note an In BONE repair on-site... that worries me, because the software just doesn't do well after a repair on the spot.
Looking for replacement option, and eager to have a BONE without corrupted files and corrupt files... If on-site repair is my only way to go... What are the actual steps not excluded... I have my original Windows7 DVD...
Haven't tried using the system restore, given that this feature would not replace the corrupted files back to a previous restore point...
Very well.
Marking of my previous response as RESPONSE will officially close your thread.
PS: Wouldn't mind a USEFUL vote while you're there either.
-
RMAN backup on the database with data file with corrupted block
Hi friends,
I have a problem with a database of oracle 11g XE on windows server 2003, the database is in production, it is open, is operating normally.
The database has no backup configured before, so I put the database archiving mode and tried to backup using rman utility, but it show me some errors.
First of all, it showed me:
ORA-19501: error in reading file... SYSAUX. DBF
ORA-27070: async read/write failed
OSD-04016: error queuing an asynchronous i/o request.
And when I passed the dbv on the SYSAUX file utility. DBF showed the fatal error.
So, I switched CHKDSK utility on windows to repair the disc of the error. After that, run utility dbv and he passed and showed me the corrupt on SYSAUX blocks. DBF
Then, came to rman and ran:
RMAN > validate the logical database checking;
State of the file marked corrupt blocks examined empty blocks high YVERT
---- ------ -------------- ------------ --------------- ----------
3 0 1111 115840 78859075 FAILED
File name: C:\ORACLEXE\APP\ORACLE\ORADATA\XE\SYSAUX. DBF
Type block for lack of treated blocks blocks
---------- -------------- ----------------
Data 0 0
Index 0 0
Other 38 114729
After that: watching the content of v$ database_block_corruption;
Show me a lot of lines like this:
SQL > select * from v$ database_block_corruption;
FOLDER # BLOCK # BLOCKS CORRUPTION_CHANGE # CORRUPTIO
---------- ---------- ---------- ------------------ ---------
3 4440 1 FRACTURED 0
3 4439 1 0 ZERO ALL THE
3 4386 2 FRACTURED 0
3 4384 1 0 ZERO ALL THE
3 4334 1 0 ZERO ALL THE
...
33 selected lines.
Finally I try to rerun rman and he shows me the error:
ORA-19566: exceeded the limit of 0 blocks corrupt file C:\ORACLEXE\APP\ORACLE\ORADATA\XE\SYSAUX. DBF
How can I do backup with rman? Maybe I can by pass the corrupt block?
I'll be grateful for any help you can provide.
=)
It would be better if you try to find the reason of corruption and try to recover the corrupt blocks. A block corrupted in the backup would really not must use. But if you're ready to take backup, you can ask RMAN to ignore corrupt blocks and move forward.
Use the pseudo-code for the backup
Run {set maxcorrupte for the database
to 10; backup tablespace sysaux ;}
HTH
Aman...
-
Corrupt block is detected in the control file
Hi all
I have a scenario where I have set up regional advisory councils active / standby and I managed archive redo logs applied to sleep - everything was ok
Versions - Oracle 11g R2, RHEL 5
Scenario 1:
Perfectly redo application log on the work of sleep when I don't create our software application tables using sql on the primary scripts until AFTER the stages of CAR/Dataguard completed successfully.
Scenario 2:
Redo log application does not work when I'm not running our sql scripts until I take a RMAN backup of the primary to be duplicated in the Standby
Everything comes in the day before after the rman duplicate, archive logs is transferred, but now they are not applied.
I see the ORA-00227: Corrupt block is detected in the control file: (block 1, block # 1) in the journal alerts when I put on standby in Recovery Mode
My theory is that somehow our sql scripts are breaking my rman backups when I run them before creating a primary RMAN backup to load on Standby - I just need someone to indicate whether there is a possibility of their experience, if so I will contact the support of Oracle to continue the investigation. It's my first time working on CARS DG etc.
Thank youHello
If not solved with 11.2.0.2 I opened a SR.
I don't think that this should be the case...
Sebastian -
Original title: Unable to connect to the wireless network
Unable to connect to the network wireless Toshiba Satellite A105 PC running Windows 7. "Windows could not finish repairing the problem because it is impossible to perform the following action. Renewal of your IP address. Works with Windows XP SP2, IE 8.00.6001.18702 file, I think that Version 3. It has been installed on a disk provided by Microsoft after that old installation became corrupt (in the sense of Microsoft technical support.) Before that, wireless network worked well. (So unable to connect to the Internet for updates.) Have tried to change the other settings and different messages acquired when it SHOWS that I am connected but cannot connect because of something to do with the certificate. I don't remember what I did to try to solve this problem in the last days.
I should add that I have tried the solutions of the previous forum on this topic, and none worked.Hi Marilynnla,
Sorry to hear about the bad experience you encounter. Lets see if the network problem can somehow be archived.
Read this article and follow the steps. Lets see if it helps in any way.
How to troubleshoot wireless network connections in Windows XP Service Pack 2(Works for Windows XP SP3 as well)
-
ORA-19612: datafile 0 not restored because of missing data
Hello
I'm testing a restoration of the controlfile. The database is in archivelog mode and automatic backup is defined on IT. I did successfully a full backup and backup of database copy.
To test I did the following:
-Note the DBID
-closing of the database
-Rename the two controlfiles:
$ mv /u02/rcat/control01.ctl /u02/rcat/control01.ctl_old
$ mv /u02/fra/rcat/control02.ctl /u02/fra/rcat/control02.ctl_old
When I try to restore the controlfile autobackup form I get the following error. What could be reason please?
Thank you![rcat@oel54]$ rman target / Recovery Manager: Release 11.2.0.1.0 - Production on Fri Dec 10 00:07:41 2010 Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved. connected to target database: RCAT (not mounted) RMAN> set dbid 502889862; executing command: SET DBID RMAN> restore controlfile from autobackup; Starting restore at 10-DEC-10 allocated channel: ORA_DISK_1 channel ORA_DISK_1: SID=19 device type=DISK recovery area destination: /u02/fra database name (or database unique name) used for search: RCAT channel ORA_DISK_1: AUTOBACKUP /u02/fra/RCAT/autobackup/2010_12_09/o1_mf_s_737336682_6j2pyv2l_.bkp found in the recovery area channel ORA_DISK_1: looking for AUTOBACKUP on day: 20101210 channel ORA_DISK_1: looking for AUTOBACKUP on day: 20101209 channel ORA_DISK_1: restoring control file from AUTOBACKUP /u02/fra/RCAT/autobackup/2010_12_09/o1_mf_s_737336682_6j2pyv2l_.bkp RMAN-00571: =========================================================== RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS =============== RMAN-00571: =========================================================== RMAN-03002: failure of restore command at 12/10/2010 00:09:55 ORA-19870: error while restoring backup piece /u02/fra/RCAT/autobackup/2010_12_09/o1_mf_s_737336682_6j2pyv2l_.bkp ORA-19612: datafile 0 not restored due to missing data $ ll /u02/fra/RCAT/autobackup/2010_12_09/o1_mf_s_737336682_6j2pyv2l_.bkp -rw-r----- 1 oracle dba 10354688 Dec 9 23:44 /u02/fra/RCAT/autobackup/2010_12_09/o1_mf_s_737336682_6j2pyv2l_.bkp
ORA-19612: datafile 0 not restored because of missing data
lack of data---> file may damaged from backup sets...
so try to take backup once more and then restore.In addition, you must give
RMAN > list backup of controlfile; comes from the target database not new database...Thank you
-
I ran repair permissions in disk utility. the latest information that printed was, (warning SUID FileSystem/library /CoreService /RemoteManagement /Contents /MacOS /ARDAgent ARDAgent.App) has been modified and will not be repaired. This warns something that I really need to worry. Also, how can it be fixed
Don't worry about this.
-
WARNING: SUID file will not be repaired kernel of the system/library/services/distance
If the question is what do I do about this, the answer is nothing.
-
My computer is slow, so I did a repair disk with disk utility. It shows the following message: WARNING: SUID "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" file has been modified and will not be repaired.
This is what significantt and what I need to do.
In addition, anyone recommend a good antivirus, malware application; or is the system Mac enough? Wharton could I do for optimization?
1. it is normal. You need not do anything.
2. unless you use Windows on the computer or often to share files with computers running Windows, it just Synchronize Mac OS X and use your common sense.
(138148)
-
Computer Dell laptop Windows XP SP3 - processor Intel Celeron M 1.40 GHz, 512 MB Ram, ATI MOBILITY RADEON 9000
The local connection is working fine but my wireless connection does not receive through my laptop. The wireless works since it goes through my PS3 and my sister's laptop perfectly.
I used the repair, but it will say:
Windows could not finish repairing the problem because it is impossible to perform the following action: renewing your IP addressI used in the cmd command:
ipconfig/renew
Needless to say a message:
No operations can be performed on the wireless network connection, although it has its media disconnected.Help, please
Received my solution of another comforter
Told to go to my router linksy page http://192.168.1.1 setup and change the wireless security mode. It is in mixed mode to WPA2/WPA and I changed it to WPA2 Personal and it worked!Thanks for trying to help JW! : D -
Original title: Repair the connection to the local network.
When I try to repair the connection to the local network I get the following message: "Windows could not finish repairing the problem because the following action could not be completed: clear the cache DNS." For assistance, contact the person who manages your network. "How can I solve this problem?
Hello
1. what exactly is the problem you are experiencing when connecting with Internet?
2. what type of Internet connection you have (wired or wireless) sound?
3. don't you make changes to the computer until the problem occurred?
Method 1: To resolve this issue, follow these steps:
(a) click Start, click run, type services.msc, and then click OK.
(b) in the list of services, click DNS Client.
(c) ensure that the status column displays started and that the Startup Type Automaticcolumn.
(d) if the service is not set to started or if the startup type for the DNS Client service is not set to Automatic, follow these steps:
a. right click on Client DNS and then click Properties.
b. in the Properties of the Client DNS dialog box, click the general tab and then click Automatic in the list Startup type .
c. click Start, click applyand then click OK.
Method 2: Wi - Fi and in Windows network connection issues.
Hope this information is useful.
-
Recovery not authorized by HP software
Recovery not authorized by HP software after WD 640 GB 5400 RPM hard drive has failed and replaced with a 500 GB drive at 7200 RPM.
While using the computer before the end of the 1 year warranty, crashed my dv6 2114tx.
To restart the computer, the computer would not start.
Diagnosis could not find the hard drive and it looked sick.
While still under warranty I mistaken to buy a new hard drive to improve the speed.
No riders were found on the new hard drive.
The new hard drive is a Hitachi travelstar 7 k 500
Hard disk has been mounted and tested OK by HP software.
Software HP would NOT allow factory reset as the new hard drive is smaller than the original.
When new recovery disc, I created and when running with them now, they load but the dv6 2114tx does not recognize the hard drive and does not, therefore, restart as part of the recovery process.
Could you please tell me as to how I can get my computer and run it again?
Well, the computer has picked up after the use of your workaround. 100% you mind, but at least I can use it again.
After that the last completed recovery disk, I inserted the installation disk of Win 7 and rebooted with the help of the F8 key. Installed Win 7 Pro on an empty space of the partitioned drive. Different order to the product like sku key. Tried again with nothing entered the product key, OK.
Now, I had two options to the Windows Boot Manager and was able to complete the recovery of orginal Win 7 Home.
Start-up takes a bit more now and have lost some control of customizing office but mostly Ok.
Hard drive partition can become a problem, but all good for now.
Years ago a leader of IBM who did a few simple calculations in his office.
If he could do an IBM start 10 sec faster than an Apple and he sold 60 million computers.
Then it could save you hours of country 1 million lost by day, waiting for a computer.
Maybe you are looking for
-
Newsstand and new applications are available at the Canada? Icon 'see in the App Store.
Newsstand and new applications are available at the Canada? I don't see them in the App Store.
-
Hi all. I've been cleaning and updating my granddaughter desktop PC. This model used by an Asus P5BW - rev 1.05 MB (HP/Compaq name: Buckeye-GL8E), a processor Intel E6300 4x1Go RAM PC2-6400 and runs a 10 Pro 64-bit Windows installation. I thought I
-
Look and the iPhone is no longer connect
After resetting the settings on my iphone5 (long story), my Apple Watch matched now tells me that it can not load maps, and weather, or because it cannot connect to my iPhone. Oddly enough, my calendar and stocks apps still work. When I run the app
-
maximum rate of series cRIO 9066
Hello. I would like to know the maximum flow to the serial port on CompactRIO 9066. I couldn't find it in the manual. Kind regards Daniel
-
My sleekbook will not play music with cover closed!
Hello, I just bought a sleekbook (amd model) and I have it configured on the computer that he didn't go to sleep when I close the lid, so I can listen to music while I was walking around, but for some reason some after a few seconds of it being close