SFC/scannow found he could not repair corrupted files

Similar Questions

• SFC/scannow found but could not fix some corrupted files, how can I remove them / find them?

  Separated from this thread.

  Rob,

  Sincerely appreciate the info/advice.  I ran sfc/scannow and cropped the results to include only the unable to complete sections.  OK portions have been eliminated for practical reasons.  PC is a Vista PC with SP2 and all updates.  The antivirus program is run several times a week and has identified no virus/spyware/malware.  No other real problems with PC.

  2015-03-19 17:07:14, CSI Info 0000014 c [SR] beginning verify and repair operation
  2015 03-19 17:07:16, CSI Info 0000014 d [SR] cannot repair the military record [l:18 {9}] "Chess.dll" Microsoft-Windows-Shell-PremiumInboxGames-chess, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral public key in the store, file is missing "
  2015-03-19 17:07:19, CSI Info 0000014e [SR] cannot repair the military record [l:32 {16}] "PurblePlace2.dll" Microsoft-Windows-Shell-InboxGames-PurblePlace, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral public key in the store, file is missing "
  2015-03-19 17:07:19, CSI Info 0000014f [SR] cannot repair the military record [l:30 {15}] "PurblePlace.dll" Microsoft-Windows-Shell-InboxGames-PurblePlace, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral public key in the store, file is missing "
  2015-03-19 17:07:20, Info CSI 00000150 [SR] cannot repair the military record [l:32 {16}] "PurblePlace2.dll" Microsoft-Windows-Shell-InboxGames-PurblePlace, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral public key in the store, file is missing "
  2015-03-19 17:07:20, Info CSI 00000151 [SR] this element is referenced by [l:160 {80}] "' Package_65_for_KB948465 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.18005.948465 - 240_neutral_GDR" "
  2015-03-19 17:07:20, Info CSI 00000152 [SR] cannot repair the military record [l:30 {15}] "PurblePlace.dll" Microsoft-Windows-Shell-InboxGames-PurblePlace, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral public key in the store, file is missing "
  2015-03-19 17:07:20, Info CSI 00000153 [SR] this element is referenced by [l:160 {80}] "' Package_65_for_KB948465 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.18005.948465 - 240_neutral_GDR" "
  2015 03-19 17:07:20, info CSI 00000154 [SR] could not reproject corrupted file [ml:520 {260}, l:98 {49}] '------? "\C:\Program Files\Microsoft Games\Purble Place"------[l:30 {15}] "PurblePlace.dll"; source file in the store is also corrupted
  2015 03-19 17:07:21, info CSI 00000155 [SR] cannot repair the military record [l:18 {9}] "Chess.dll" Microsoft-Windows-Shell-PremiumInboxGames-chess, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral public key in the store, file is missing "
  2015-03-19 17:07:21, info CSI 00000156 [SR] this element is referenced by [l:160 {80}] "' Package_66_for_KB948465 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.18005.948465 - 243_neutral_GDR" "
  2015 03-19 17:07:21, info CSI 00000157 [SR] could not reproject corrupted file [ml:520 {260}, l:84 {42}] '------? \C:\Program Files\Microsoft Games\Chess"\[l:18{9}]"Chess.dll; source file in the store is also corrupted
  2015 03-19 17:07:21, info CSI 00000159 [SR] verification complete

  2015-03-19 17:08:47, transaction Info CSI 00000187 [SR] beginning verify and repair
  2015 03-19 17:08:49, info CSI 00000188 [SR] cannot repair the military record [l:36 {18}] "ShaderCache.ps_2_0" Microsoft-Windows-WindowsSystemAssessmentTool, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral public key in the store, file is missing "
  2015 03-19 17:08:55, info CSI 00000189 [SR] cannot repair the military record [l:36 {18}] "ShaderCache.ps_2_0" Microsoft-Windows-WindowsSystemAssessmentTool, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral public key in the store, file is missing "
  2015-03-19 17:08:55, CSI Info 0000018 [SR] a the item is referenced by [l:158 {79}] "' Package_16_for_KB948465 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.18005.948465 - 49_neutral_GDR" "

  2015-03-19 17:10:25, CSI Info 000001 c 2 [SR] repair 3 components
  2015-03-19 17:10:25, CSI Info 000001 c 3 [SR] beginning operation check and repair
  2015-03-19 17:10:25, CSI Info 000001 c 4 [SR] cannot repair the military record [l:32 {16}] "PurblePlace2.dll" Microsoft-Windows-Shell-InboxGames-PurblePlace, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral public key in the store, file is missing "
  2015-03-19 17:10:25, CSI Info 000001 c 5 [SR] cannot repair the military record [l:30 {15}] "PurblePlace.dll" Microsoft-Windows-Shell-InboxGames-PurblePlace, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral public key in the store, file is missing "
  2015-03-19 17:10:25, CSI Info 000001 c 6 [SR] cannot repair the military record [l:18 {9}] "Chess.dll" Microsoft-Windows-Shell-PremiumInboxGames-chess, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral public key in the store, file is missing "
  2015-03-19 17:10:25, CSI Info 000001 c 7 [SR] cannot repair the military record [l:36 {18}] "ShaderCache.ps_2_0" Microsoft-Windows-WindowsSystemAssessmentTool, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral public key in the store, file is missing "
  2015-03-19 17:10:25, CSI Info 000001 c 8 [SR] cannot repair the military record [l:18 {9}] "Chess.dll" Microsoft-Windows-Shell-PremiumInboxGames-chess, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral public key in the store, file is missing "
  2015-03-19 17:10:25, CSI Info 000001 c 9 [SR] this element is referenced by [l:160 {80}] "' Package_66_for_KB948465 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.18005.948465 - 243_neutral_GDR" "
  2015-03-19 17:10:25, 000001 ca CSI Info [SR] could not reproject corrupted file [ml:520 {260}, l:84 {42}] '------? \C:\Program Files\Microsoft Games\Chess"\[l:18{9}]"Chess.dll; source file in the store is also corrupted
  2015-03-19 17:10:25, 000001cb CSI Info [SR] cannot repair the military record [l:32 {16}] "PurblePlace2.dll" Microsoft-Windows-Shell-InboxGames-PurblePlace, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral public key in the store, file is missing "
  2015-03-19 17:10:25, 000001cc CSI Info [SR] this element is referenced by [l:160 {80}] "' Package_65_for_KB948465 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.18005.948465 - 240_neutral_GDR" "
  2015-03-19 17:10:25, CSI Info 000001 cd [SR] cannot repair the military record [l:30 {15}] "PurblePlace.dll" Microsoft-Windows-Shell-InboxGames-PurblePlace, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral public key in the store, file is missing "
  2015-03-19 17:10:25, CSI 000001ce [SR] Info this item is referenced by [l:160 {80}] "' Package_65_for_KB948465 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.18005.948465 - 240_neutral_GDR" "
  2015-03-19 17:10:25, 000001cf CSI Info [SR] could not reproject corrupted file [ml:520 {260}, l:98 {49}] '------? "\C:\Program Files\Microsoft Games\Purble Place"------[l:30 {15}] "PurblePlace.dll"; source file in the store is also corrupted
  2015-03-19 17:10:26, CSI Info 000001 d 0 [SR] cannot repair the military record [l:36 {18}] "ShaderCache.ps_2_0" Microsoft-Windows-WindowsSystemAssessmentTool, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral public key in the store, file is missing "
  2015-03-19 17:10:26, CSI Info 000001 d 1 [SR] this element is referenced by [l:158 {79}] "' Package_16_for_KB948465 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.18005.948465 - 49_neutral_GDR" "
  2015-03-19 17:10:26, CSI Info 000001 d 3 [SR] full repair
  2015-03-19 17:10:26, CSI Info 000001 d 4 [SR] validation of transaction
  2015-03-19 17:10:26, CSI Info 000001 d 8 [SR] check and complete repair operation. All of the files and registry keys listed in this operation were repaired successfully

  A few notes:

  (1) we will NEVER buy another PC with a trace of all 'games' that is, waste of space and time and a value.  Looking at the impossible to correct entries, they seem to be exclusively associated with functions of game without value.

  (A) we need to participate in this farce of a game or can simply be ignored without affecting

  legitimate operation/functions of the PC?  When close or restart, we get the error message

  0 x 0000142 failed to initialize properly... Other PC functions seem to work well.

  (B) is there a way to clean up the waste of space games so that would solve the problem

  without affecting the performance of the PC? (When try to remove the game worthless hoax,)

  It will not remove them). I know that some of the files 'source' for waste games

  missing.  Since NONE of them will ever by used, is there a reason to worry?

  Thanks in advance for your help.

  Gene

  St Paul, MN

  Hello

  This note at the end:

  "2015-03-19 17:10:26, info CSI 000001 d 8 [SR] check and repair the Transaction."
  completed. All of the files and registry keys listed in the operation have been successfully
  "repaired"

  Run a Checkdisk just to be sure and rerun the SFC.

  Run checkdisk - schedule it to run at the next startup, then apply OK your way
  outside, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  You can ignore the problems of game but if there is ever, all you are concerned about
  then you can extract the files from the Vista DVD or even to make a upgrade in Place or repair
  Installation

  Access files on your Vista installation DVD
  http://www.Vistax64.com/tutorials/86959-access-Vista-install-DVD-files.html

  How to extract system files missing from the DVD of Windows 7/Vista.
  http://blog.NirSoft.NET/2009/09/17/how-to-extract-missing-system-files-from-the-DVD-of-Windows-7vista/

  --------------------------------------------------------------

  You can try a repair install or an upgrade in Place.

  You can use another DVD that aren't copy protected but you you need to own
  Product key. It must be the same version 32 or 64 BIT Vista OEM. Also the system
  machine to usually sell the cheap disk since you already own Windows. Don't forget to make a
  good backup or 3 (security in redundancy).

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• SFC/scannow found but could not fix some corrupted files

  Hello

  Today, I tried to install the update package 'Microsoft Visual Studio 2010 Service Pack 1', but unfortunately she didn't... Then, I wanted to check my operating system with SFC/scannow and discovered that some files are corrupt.

  I would like to know if anyone here can check the log and can tell me what files are important and if there is serious damage. I do have to know how to analyze these logs, but I don't know what needs Windows or what.
  https://rapidshare.com/files/4272859726/CBS.7z

  Thank you!

  Hi Maik,

  I suggest that refer you to the link that talks about the determination of the log files and how repair/replace files.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-performance/SFC-SCANNOW-detected-some-corrupt-files-unable-to/aef21425-6530-464a-A18D-a4d21449aa82?page=1

  Warning: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  For more information, see the link.

  How to analyze the entries in the log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista

  Note: Applies to Windows 7

  Let us know the results. We will be happy to help you further.

• Scannow found problem, could not fix, called file journal CBS but windows does not give me access to see

  Update not working - tried everything, including the command prompt scannow - he found problems but could not fix, then referred me to a CBS log file to see - but Windows will not give me access to the file to see.  What gives?  Of course, I have a problem - how to fix?  sfc/scannow info below:

  Microsoft Windows [Version 6.0.6001]
  Copyright (c) 2006 Microsoft Corporation.  All rights reserved.

  C:\Windows\System32>sfc/scannow

  Start scanning system.  This process will take time.

  Start of the phase of verification of the scanning system.
  Full check of 100%.
  Windows resource protection found corrupt files but was unable to repair some of th
  EM.
  Details are provided in convertible bonds. Journal windir\Logs\CBS\CBS.log. For example
  C:\Windows\Logs\CBS\CBS.log

  C:\Windows\System32 >

  The update which is a failure? The .net 4.0 security update?

  If so, try this:

  Credits go to Control_tps
  
  Try the following steps, please:

  1. go in programs and features, click on it.

  2. scroll to the bottom for Microsoft.Net Framework 4 Client Profile, do a right click.

  3. we will give you a choice of uninstall/change, click it.

  4. then it will give a choice to repair, choose repair. It will take about 4 to 10 minutes to repair (with my PC) experience may vary.

  5 once completed, will update you Center and update again.

  If not fixed, try to remove .net Framework 4.0 with the .NET Framework Cleanup Tool (http://blogs.msdn.com/b/astebner/archive/2008/08/28/8904493.aspx ), reinstall it and install the updates.

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• SFC/scannow errors found but could not fix some files corrupted,

  Greetings! my windows Explorer still crashes so I tried to search this site for possible answers to my problem, I found one by sfc/scannow, I tried to find some probs then we found that my file explore was corrupted. It's fixable without reformat my OS?...
  How?
  I have a 64-bit windows 7 ultimate service pack 1 System. Thanks in advance for help Microsoft Community!
  Here's the part of my report sfcdetails.txt log:

  2016 01-25 14:53:05, info CSI 00000088 [SR] cannot repair the military record [l:24 {12}] "explorer.exe" from Microsoft-Windows-explorer, Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2016-01-25 14:53:05, CSI Info 0000008a [SR] cannot repair the military record [l:24 {12}] "explorer.exe" from Microsoft-Windows-explorer, Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2016-01-25 14:53:05, CSI Info 0000008b [SR] this element is referenced by [l:202 {101}] "Microsoft-Windows-Foundation-Package ~ 31bf3856ad364e35 ~ amd64 ~ ~ 6.1.7601.17514.WindowsFoundationDelivery '.
  2016 01-25 14:53:05, CSI 0000008e Info [SR] could not reproject corrupted file [ml:520 {260}, l 28 {14}] '------? \C:\Windows"\[l:24{12}]"Explorer.exe '; source file in the store is also corrupt.

  In safe mode and clean the boot, what was the results?

  Do you have the Windows 7 DVD?

  Follow the steps in the following Microsoft Support article:

  8.1 Windows, Windows 8 or Windows 7 hangs or freezes

  Warning before you perform these troubleshooting steps:

  System Restore: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  Disk check: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Security scanner: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Also, try the steps in the following Microsoft support article:

  Optimize Windows performance

  Please post back with the results and the information requested, we will be happy to help you further.

  ___________________

  Thank you best regards &,.

  Isha Soni

• media player does not open. Itried the benchmark tool, it did not help. I tried the scanning from the prompt, it says that some files were corrupted and could not repair them. There is no error message at all

  Itried the benchmark tool, it did not help. I tried the scanning from the prompt, it says that some files were corrupted and could not repair them. There is no error message at all

  Maybe the info will offer something that you haven't tried:

  First, launch... Task Manager...

  How to launch the Task Manager instantly in Windows XP or Vista?
  http://www.XP-Vista.com/tipstricks/how-to-launch-the-Task-Manager-instantly-in-Windows-XP-or-Vista

  The Task Manager / processes tab select (highlight) any which instance of:
  "wmplayer.exe" and left click on the button "complete the process".

  If you see a dialog box 'Warning'... left click Yes.

  Close the Task Manager.

  Try Windows Media Player again.

  And... the following links may be worth a visit:

  (925704) when I try to use Windows Media Player 11, the program
  does not start, or some user interface elements are empty
  http://support.Microsoft.com/kb/925704

  Please see the following article for info on opening a high command
  Prompt in Vista

  Windows Vista - command prompt: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/command-prompt-frequently-asked-questions
  (scroll down to: how to run a command with elevated privileges?)

  Good luck...

• SFC/scannow can't repair corrupted files

  original title: RAN SFC/scannow have currpted files cannot get rid of them ran newspaper and he told me the members file name how can I del these files currupt Email removed for privacy

  has ran sfc scannow found cruppted of the windows file search journal first I ran microsoft Mr don't fix no newspaper help list the names lik / / can't fix the military record [01:25 {12} "settings in the microsoft-windows-bar side.

  How can I remove this file please

  E-mail address is removed from the privacy *.

  Hello

  Download Autoruns and check under the tab Sidebar Gadgets - remove anything which is a yellow Standard
  Folder marker and/or points to a temp area or non-existent.

  Autoruns - free - see what programs are configured so that it starts automatically when your system
  boots and you login. Autoruns shows you the full list of registry and file locations where
  applications can configure Auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  ===========================================================

  Many files that SFC cannot resolve are not important.

  Start - type in the search box-> find CMD in top - click right on - RUN AS ADMIN

  put the command from below (copy and paste) in this box and her and then press ENTER.

  findstr/c: "[SR]" %windir%\logs\cbs\cbs.log > sfcdetails.txt

  who creates the sfcdetails.txt file in the folder that you are in when you run it.

  So if you're in C:\Windows\System32 > then you will need to look in that folder for the file.

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  in Windows Vista
  http://support.Microsoft.com/kb/928228

  This creates sfcdetails.txt in C:\Windows\System32 find and you can post the errors in a message
  here. NOTE: there are probably duplicates so please only post once each section error.

  You can read the newspaper/txt files easier if you right click on Notepad or Wordpad then RUN AS ADMIN - then
  You can navigate to sfcdetails.txt (in C:\Windows\System32) or cbs.log (in C:\Windows\Logs) as needed.
  (You may need to search sfcdetails.txt if it is not created in the default folders.)

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Cannot install paintnet 3.5. It gives an error "system of e/s file not found exceptions could not load file."

  Original title: uninstalled paintnet3.5 now impossible to reinstall download

  "downloaded the file and open it to install gives this error :-systemi/o file not found exceptions could not load file or Assembly of base of the version3.0.0.0 culture = neutral public key token = 31bf3856ad364e35' or one of its dependencies, the system cannot find specified file base name of the 3.0.0.0 - batch version of gibberish between - then" AVT Assembly binding logging is disabled to allow to link failure check the registry value (hklm\software\microsoft\fusion\enablelog (c word) 1 IAM onwindows vista service pack2 version6 and ihavent a clue unless something has been lost in my recent wave of attacks of malware bullguard - computer reports now clean-i do not know how to access the files of basic trends are not listed as installed programs

  Hi Bernie, 78,.
   
  I suggest that you follow these steps and check if it helps.
   
  Step 1:
   
  Right-click on the setup.exe file and run as administrator and check.
   
  Step 2:
   
  I suggest that make you the SFC scan on your machine like a system file is damaged or missing. Scan SFC repairs and tries to retrieve system files.
   
  Step 3:
   
  I am not quite sure if the malware is flushed out of your system. I wish that you run a scan complete of your security again software or run a line scan using the link below.
  http://www.Microsoft.com/security/malwareremove/default.aspx
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• could not clean the file history data element not found in windows 8

  My drive hard ext fills, and when I try to clean the first versions or any version I get the same message "could not clean the file history data element not found in windows 8" I don't know if there is a corrupted file.  The only thing I have not done is to delete the entire folder FileHistory ext drive and start again.

  Hey Daley,

  If there are errors in your player in the history of the files that need to be repaired, try to repair your disk

  1. Open the Center of the Action drag from the edge right screen, quilting search (or if you use a mouse, pointing to the top right of the screen, move the pointer of the mouse down and then clicking search), entering in the center of Action in the search box, type or by clicking settings and then by typing or clicking on the center of Action.

  2. Tap or click repair.

  Warning of Chkdsk.

  Important: When running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Reference:

  What happens if something is wrong in the history of the files?

  Please post back with more information and the status of the issue.

• Error computer repair at each reboot of Windows Vista. Startup Repair says error ""could not repair.

  Original title: problem at startup

  Whenever I start my system, using windows 7 Ultimate a message for repair (recommended) or windows to start normally. When I go for repair, there nothing give a message "could not repair' why?

  Hello

  1. are you able to boot to the desktop?
  2 have you made any changes to the computer before the show?
   
   
   
  Method 1: Startup Repair is a Windows Recovery tool that can fix certain system problems that might be preventing Windows to start. Startup Repair scans your computer for the problem and then tries to fix it so that your computer can start correctly
  Reference: http://windows.microsoft.com/en-US/windows-VISTA/Startup-Repair-frequently-asked-questions
  
  Method 2:
  Windows Vista or Windows 7 unbootable, and the Startup Repair tool does not resolve the problem:
  http://support.Microsoft.com/kb/934540

• Windows Mail error message: "some of the files could not be found and could not be attached to the message." You want to send the message anyway? »

  original title: end this message appears "some of the files could not be found and he could not be attached to the message." You want to send the message anyway? "I am running Windows Vista Home Basic Edition
  Hello
  I'm so frustrated, this problem has arisen at a very bad time!

  I started to use Windows Mail a few months ago and have had no problems so far, since Thursday night, every time that I attach a file to an e-mail message when I click on send this message 'some files was not found and could not be attached to the message. You want to send the message anyway? "I am running Windows Vista Home Basic Edition.

  Thank you

  Hello

  Method 1:
  You can perform the steps of troubleshooting from the link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Windows-Mail

  Method 2:
  You can check if the default e-mail program is selected, follow the steps to do this:
  a. go to: Control Panel and go to default programs. Select Configure programs and Computer Defaults b. Select continues if the permissions window will appear
  c. left, double-click Custom, under Choose a default e-mail program, select Windows Mail.
  d. click Ok and close.

  Method 3:
  If none of the above steps are useful, then try to perform the system restore to the date when it was working fine.
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  NOTE: System Restore does not affect personal files, such as e-mail, documents, or photos, so it cannot help you restore a deleted file. If you have backups of your files, you can restore files from a backup.

  Method 4:
  If the file you are trying to download is opened, then it will not download, you can close the file completely and then try to download.

   

• corrupted files run sfc/scannow, but findstr cannot find details or file on windows 7pro sp.1 upgraded from vista ultimate

  corrupted files run sfc/scannow but findstr cannot find details or file on windows 7pro sp.1 upgraded from vista ultimate cd rw Dvd Player also stopped working cannot download Mr fixit on internet explore 11.

  A possible answer to your dilemma related to the results of the SFC is on this thread:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/SFC-cannot-fix-corrupted-files-in-Windows-7/f798f377-126C-47ff-Bb16-ef5e0dddb5be

• Smoking: CMDTUX_CAT:816: ERROR: could not exec, executable file not found

  Saludos
  
  Soy an estudiante y estoy con experimentado a trial of smoking 10.3 en Windows XP y cuando trato inciar application simpserv, obtengo lo siguiente:
  
  C:\Oracle\tuxedo10gR3_VS2005\samples\dnet\cli\callapp > tmboot
  All admin processes and the server starts? (y/n): y
  All admin process is started and the server C:\Oracle\tuxedo10gR3_VS2005\samples\d
  net\cli\callapp\tuxconfig
  INFO: Oracle Tuxedo, Version 10.3.0.0 with VS2005, 32-bit, Patch level (none)
  
  Starting process of the admin...
  
  exec BBL - one:
  process ID = 2596... Has begun.
  
  The server process starting...
  
  exec simpserv - R:
  CMDTUX_CAT:816: ERROR: could not exec, executable file not found
  exec WSL - A - n - //IBM934007079:3050 - x 5 - m 2 n 10:
  Failed.
  1 started process.
  
  No comprendo por what happens, the mi archivo UBBCONFIG config es esta:
  
  #
  # (c) 2006 BEA Systems, Inc. All rights reserved
  #
  
  * RESOURCES
  IPCKEY 76543
  #Example:
  #IPCKEY 76543
  
  MASTER SITE1
  NETWORKID DOM1
  MAXACCESSERS 50
  MAXSERVERS 50
  MAXSERVICES 50
  MODEL SHM
  PERIOD 5
  
  * MACHINES
  IBM934007079 LMID = SITE1
  APPDIR = "C:\Oracle\tuxedo10gR3_VS2005\samples\dnet\cli\callapp."
  TUXCONFIG = "C:\Oracle\tuxedo10gR3_VS2005\samples\dnet\cli\callapp\tuxconfig."
  TUXDIR = "C:\Oracle\tuxedo10gR3_VS2005."
  MAXWSCLIENTS = 10
  
  * GROUPS
  GROUP1 = 1 LMID GRPNO = SITE1
  WSGRP GRPNO = 4 LMID = SITE1
  
  * SERVERS
  SRVID = SRVGRP 11 simpserv = CLOPT GROUP1 = "-A"
  
  WSL = WSGRP SRVID = 1 SRVGRP
  RESTART = GRACE MAXGEN = 10 Y = 0
  CLOPT = ""-A - n - //IBM934007079:3050 - x 5 - m 2 n 10 ""
  
  * SERVICES
  
  The idea are iniciarla para poder accesarla through ALSB.
  
  Thank the ayuda can prestarme, gracias.

  Hello

  You can verify that the wsl.exe file is located in C:\Oracle\tuxedo10gR3_VS2005\bin?

  If so, can you please post the contents of the ULOG to the period of time when you tried to start this application?

  Thank you
  Todd little
  Chief Architect of Oracle Tuxedo

  PS I do not think that oracle supports Windows XP to run the Tuxedo servers. This works if you install the Windows Server 2003 kit, but we cannot approve what Microsoft does not consider Windows XP a server operating system.

• While the plug-and-play was still there at all, and I tried to go I still receive error message 2. could not locate the file.

  Here's the situation.

  First of all only started to the top of my Asus to find was no sound. Following up to plug-and-play service has not started. It is now removed apparently.

  Here are the solutions I tried, in and out of safe mode:

  While the plug-and-play was still there at all, and I tried to go I still receive error message 2. could not locate the file.

  In CMD sfc/scannow reached 32%, then breaks down, saying: it finds corrupted files, but could not fix.

  It Startin via msconfig did not work.

  Tried to go through Device Manager, which is completely empty for some reason any.

  System Restore is restoring before this problem. When you attempt a restore, plug-and-play service is not returned to the existence, defective or otherwise.

  I knew, but there may be malware, mutiple scans with several services did not find anything.

  I tried to contact microsoft help and they might suggest only I have upgraded to windows 10. Tried several times, and he has failed to be upgraded, every time. For the most part just download windows 10 and then by restarting the computer as if nothing happened. Any ideas on how I can fix this?

  Hello

  Welcome to the Microsoft community. I will certainly help you with the problem you are experiencing.

  I would like to ask you:

  • You are running Windows 7 or Windows 10 on your PC?
  • When was the last time it was working fine? Remember to make changes to the computer before this problem?

  Given that you are unable to complete the scan of SFC and Task Manager is empty, usually reinstall or do a repair install is the best choice of action. However, we can try to fix these files and check if that helps. To do this, refer to the steps below:

  1. Open the start menu and type "cmd".
  2. Right-click on the command prompt and click "run as administrator".
  3. Type the following commands and press ENTER after each.

  DISM.exe / Online/Cleanup-image /Scanhealth

  DISM.exe / Online/Cleanup-image /Restorehealth

  After you run these commands, restart the system and check.

  You can also view,

  Difficulty errors of corruption of Windows by using the DISM tool / System Update Readiness

  https://support.Microsoft.com/en-us/KB/947821

  If you are using Windows 7 and have the product key for this. You try to run an upgrade in Place to fix all the corruptions.

  Refer,

  How to perform an upgrade on the spot on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2

  Hope this information was useful.

• XmlDataModel could not open the file

  Hello

  I can't seem to understand how to fix this (attention: XmlDataModel could not open the file "... /..") /.. (' / data / model.xml ').

  what I have is the following,

  generate an XML file using the QXmlStreamWriter and after you have created the file (confirmed that the file exist) create a new XmlDataModel

  // modelfile is define in the h file like QFile *modelfile;
  
  modelfile = new QFile("data/model.xml");
  
  QXmlStreamWriter* xmlWriter = new QXmlStreamWriter();
  xmlWriter->setDevice(modelfile);
  
  // do the xml write stuff
  
  modelfile->flush();
  modelfile->close();
  
  XmlDataModel *dataModel = new XmlDataModel();dataModel->setSource(QUrl("../../../data/model.xml"));//dataModel->setSource(QUrl("modelx.xml")); << file in the asset folder to check if this works ( and this works )listview->setDataModel(dataModel);
  

  THX,

  Xtravanta

  Found the solution:

  dataModel-> setSource (QUrl::fromLocalFile(QDir::homePath() + "model.xml"));