dataguard 11 GR 2, using a main node 2 CARS and a single standby
HelloI need to implement dataguard between GR 11, 2 CARS db at a single standby mode. How should I proceed?
Secondly, I need to apply timely archive newspaper i.e I need the dataguard be in SYNC mode only in the night and the day before read-only
the rest of the time mode. Can I do this using dataguard broker? If Yes, can you please give me the steps?
Kind regards
RAM
Hi Pras,
for this, you can use the TIME-OUT setting for the log_archive_dest_n layout (by specifying the archive pending location). If you set such a delay in 1440, all archives will be shipped to the standby server (so if you lose the primary is not a big problem), but they will only be recovered on the coast a day later.
Is this what you need?
Best regards
Robert
Tags: Database
Similar Questions
-
Hi I want to get a new email on my phone or can use my maine one
I can't use my main email to work on my phone, I 2email address & and the two won't on my phone that I have to get a new email to gmail.
Hi Rego,
It depends on the type of blocks of security in your work email. I was able to set up my work email account in my Firefox OS device without any problems.
Please contact your IT Department for more information on SMTP and IMAP addresses and ports that must be configured.
Please let us know if you have other questions about your Firefox OS device.
Thank you
-Ralph
-
HP Photosmart, 7525 how to print photos from iPad to use the main paper tray.
I have pictures of troubled impression of the main plate. He continues to try to use the smallest. Photo tray
I tried selecting the main tray by default and will not work.
With the help of hp photosmart 7525Hello
If you use AirPrint, the default setting is to use the photo for the photo tray and the main tray for all other printing. AirPrint allows very little flexibility in this regard.
To increase the flexibility around paper selection and the plateau, you will need to download the HPe-Print application on the app store and use it.
-
calculation using the formula node needs two clicks
Hello
I want to use this piece of code for a larger program. My goal is to take 10 values and calculate two values using a formula. I used the formula node as the calculation functions digital ordinary would be too heavy. If I click on save, it saves two values to a file.
The problem that I am facing is that when I start the program, it works very well for the first time. The second time however, if I change the values, and then click on save, it still displays the previous values, or some altered values. I have to click on save twice to get the correct values. I don't understand the reason why this happens. Can anyone help?
File attachment: Capture screen and VI.
P.S. If the solution can help with the problem, I'm ready to change any part, but please, not irrelevant to suggestions on how to * improve my code *, because I've worked hard to make it work with another major project.
I don't completely understand the description of your problem. But I see two problems.
1. the "Save" button actually belongs to the event that handles the record button. And the case of the event should really be Jean-Claude Value Change of mouse down?
2. your STOP at the bad mechanical action. Since it happened so this just released, it is only true while you're pressing it. It stops the upper loop, but can't stop low loop because your loop will also be waiting to save button to press. Stop will always be false because you cannot press two buttons at the same time.
Try to make your action to stop button to be changed when released. You must return the button to false programmatically born of two loops. In fact, it would be better to have a case of events for the stop button to stop the lower loop.
I don't understand what you're trying to do in the upper loop. You read a file as soon as possible, and it seems to be the same file that you create in the lower loop. Why?
-
sbRIO-9631 digital inputs/outputs using e/s node FPGAS and FPGA of i/o method node
Hello, I'm trying to configure my SBRio-9631 for the first time. I try to use the on boards to inputs and digital outputs. The following code will work? This is a simple "read the entries, 'or' some inputs and pass ' exits." I have to add "E/s method nodes FPGA" between my 'FPGA of i/o nodes"to get"modes of State of sorting for the input and output lines? Also, I can't simulate/test it works, by adding 5 VDC at the entrances, and not have any source of voltage output. Thank you for your time.
Hey, Spex,.
I really, really appreciate your help. Your follow up information was exceptional.
Thanks again for your help and your time.
gjmm
-
using the formula node array index
Hello
I'm new to labview...
I am creating a vi that takes a number n and out the primes from 0 to n (i.e. including 1).
My approach to do, he uses a formula node, but I can't understand how the table index or for each number first output.
It seems that my indexing algorithm works very well, but I'm just pushing it into the array as an element.
It'll will be great if someone could take a look at my vi and give me a hint on how to index properly.
Thank you
AA
your output should be a table and index first use [index]
also you have to declare the index and Prime]
-
Need help on how to create the transformation of the Park by using the MathScript node?
Hello
I want to generate a transformation of the Park by using the MathScript node. But there is an error message which confused me. Please can someone help me to have a look of my program? Thank you!
The error message is "error-90011 occurred in error in the function mail to line 1. The sizes of the input matrices are incompatible.
Check that the matrices have the same size or one is a scalar.Possible reasons:
LabVIEW: Sizes of the input matrices are incompatible. Check that the matrices have the same size or that one is a scalar".
Hello
The problem is that all of your entries to the MathScript node are vectors. All entries of the vector to the MathScript node becomes vector lines. A multiplication of two vectors lines generates a size mismatch error. If you really want a scalar of this multiplication of output (by calculating the dot product of vectors), then you have to bring your 'a', 'b' and 'c' vectors or your vector of 'x '. If you want everything just multiply your elementwise vectors and produce an output vector, you must use the elementwise multiplication operator '. *' (time point). Use this operator between your 'a', 'b' and 'c' vectors and your calculation of fishing. For example, on your first line,
d = (2/3)*a.*(sin(x))+(2/3)*b.*(sin(x-(2*pi/3)))+(2/3)*c.*(sin(x+(2*pi/3)));Don't forget to also change your output to a 1 d of DBL array variables. You can do this by right-clicking on the output variable and selecting "Choose Data Type."
Grant M.
Staff software engineer | LabVIEW Math & Signal Processing | National Instruments -
Question to load data using sql loader in staging table, and then in the main tables!
Hello
I'm trying to load data into our main database table using SQL LOADER. data will be provided in separate pipes csv files.
I have develop a shell script to load the data and it works fine except one thing.
Here are the details of a data to re-create the problem.
Staging of the structure of the table in which data will be filled using sql loader
create table stg_cmts_data (cmts_token varchar2 (30), CMTS_IP varchar2 (20));
create table stg_link_data (dhcp_token varchar2 (30), cmts_to_add varchar2 (200));
create table stg_dhcp_data (dhcp_token varchar2 (30), DHCP_IP varchar2 (20));
DATA in the csv file-
for stg_cmts_data-
cmts_map_03092015_1.csv
WNLB-CMTS-01-1. 10.15.0.1
WNLB-CMTS-02-2 | 10.15.16.1
WNLB-CMTS-03-3. 10.15.48.1
WNLB-CMTS-04-4. 10.15.80.1
WNLB-CMTS-05-5. 10.15.96.1
for stg_dhcp_data-
dhcp_map_03092015_1.csv
DHCP-1-1-1. 10.25.23.10, 25.26.14.01
DHCP-1-1-2. 56.25.111.25, 100.25.2.01
DHCP-1-1-3. 25.255.3.01, 89.20.147.258
DHCP-1-1-4. 10.25.26.36, 200.32.58.69
DHCP-1-1-5 | 80.25.47.369, 60.258.14.10
for stg_link_data
cmts_dhcp_link_map_0309151623_1.csv
DHCP-1-1-1. WNLB-CMTS-01-1,WNLB-CMTS-02-2
DHCP-1-1-2. WNLB-CMTS-03-3,WNLB-CMTS-04-4,WNLB-CMTS-05-5
DHCP-1-1-3. WNLB-CMTS-01-1
DHCP-1-1-4. WNLB-CMTS-05-8,WNLB-CMTS-05-6,WNLB-CMTS-05-0,WNLB-CMTS-03-3
DHCP-1-1-5 | WNLB-CMTS-02-2,WNLB-CMTS-04-4,WNLB-CMTS-05-7
WNLB-DHCP-1-13 | WNLB-CMTS-02-2
Now, after loading these data in the staging of table I have to fill the main database table
create table subntwk (subntwk_nm varchar2 (20), subntwk_ip varchar2 (30));
create table link (link_nm varchar2 (50));
SQL scripts that I created to load data is like.
coil load_cmts.log
Set serveroutput on
DECLARE
CURSOR c_stg_cmts IS SELECT *.
OF stg_cmts_data;
TYPE t_stg_cmts IS TABLE OF stg_cmts_data % ROWTYPE INDEX BY pls_integer;
l_stg_cmts t_stg_cmts;
l_cmts_cnt NUMBER;
l_cnt NUMBER;
NUMBER of l_cnt_1;
BEGIN
OPEN c_stg_cmts.
Get the c_stg_cmts COLLECT in BULK IN l_stg_cmts;
BECAUSE me IN l_stg_cmts. FIRST... l_stg_cmts. LAST
LOOP
SELECT COUNT (1)
IN l_cmts_cnt
OF subntwk
WHERE subntwk_nm = l_stg_cmts (i) .cmts_token;
IF l_cmts_cnt < 1 THEN
INSERT
IN SUBNTWK
(
subntwk_nm
)
VALUES
(
l_stg_cmts (i) .cmts_token
);
DBMS_OUTPUT. Put_line ("token has been added: ' |") l_stg_cmts (i) .cmts_token);
ON THE OTHER
DBMS_OUTPUT. Put_line ("token is already present'");
END IF;
WHEN l_stg_cmts EXIT. COUNT = 0;
END LOOP;
commit;
EXCEPTION
WHILE OTHERS THEN
Dbms_output.put_line ('ERROR' |) SQLERRM);
END;
/
output
for dhcp
coil load_dhcp.log
Set serveroutput on
DECLARE
CURSOR c_stg_dhcp IS SELECT *.
OF stg_dhcp_data;
TYPE t_stg_dhcp IS TABLE OF stg_dhcp_data % ROWTYPE INDEX BY pls_integer;
l_stg_dhcp t_stg_dhcp;
l_dhcp_cnt NUMBER;
l_cnt NUMBER;
NUMBER of l_cnt_1;
BEGIN
OPEN c_stg_dhcp.
Get the c_stg_dhcp COLLECT in BULK IN l_stg_dhcp;
BECAUSE me IN l_stg_dhcp. FIRST... l_stg_dhcp. LAST
LOOP
SELECT COUNT (1)
IN l_dhcp_cnt
OF subntwk
WHERE subntwk_nm = l_stg_dhcp (i) .dhcp_token;
IF l_dhcp_cnt < 1 THEN
INSERT
IN SUBNTWK
(
subntwk_nm
)
VALUES
(
l_stg_dhcp (i) .dhcp_token
);
DBMS_OUTPUT. Put_line ("token has been added: ' |") l_stg_dhcp (i) .dhcp_token);
ON THE OTHER
DBMS_OUTPUT. Put_line ("token is already present'");
END IF;
WHEN l_stg_dhcp EXIT. COUNT = 0;
END LOOP;
commit;
EXCEPTION
WHILE OTHERS THEN
Dbms_output.put_line ('ERROR' |) SQLERRM);
END;
/
output
for link -.
coil load_link.log
Set serveroutput on
DECLARE
l_cmts_1 VARCHAR2 (4000 CHAR);
l_cmts_add VARCHAR2 (200 CHAR);
l_dhcp_cnt NUMBER;
l_cmts_cnt NUMBER;
l_link_cnt NUMBER;
l_add_link_nm VARCHAR2 (200 CHAR);
BEGIN
FOR (IN) r
SELECT dhcp_token, cmts_to_add | ',' cmts_add
OF stg_link_data
)
LOOP
l_cmts_1: = r.cmts_add;
l_cmts_add: = TRIM (SUBSTR (l_cmts_1, 1, INSTR (l_cmts_1, ',') - 1));
SELECT COUNT (1)
IN l_dhcp_cnt
OF subntwk
WHERE subntwk_nm = r.dhcp_token;
IF l_dhcp_cnt = 0 THEN
DBMS_OUTPUT. Put_line ("device not found: ' |") r.dhcp_token);
ON THE OTHER
While l_cmts_add IS NOT NULL
LOOP
l_add_link_nm: = r.dhcp_token |' _TO_' | l_cmts_add;
SELECT COUNT (1)
IN l_cmts_cnt
OF subntwk
WHERE subntwk_nm = TRIM (l_cmts_add);
SELECT COUNT (1)
IN l_link_cnt
LINK
WHERE link_nm = l_add_link_nm;
IF l_cmts_cnt > 0 AND l_link_cnt = 0 THEN
INSERT INTO link (link_nm)
VALUES (l_add_link_nm);
DBMS_OUTPUT. Put_line (l_add_link_nm |) » '||' Has been added. ") ;
ELSIF l_link_cnt > 0 THEN
DBMS_OUTPUT. Put_line (' link is already present: ' | l_add_link_nm);
ELSIF l_cmts_cnt = 0 then
DBMS_OUTPUT. Put_line (' no. CMTS FOUND for device to create the link: ' | l_cmts_add);
END IF;
l_cmts_1: = TRIM (SUBSTR (l_cmts_1, INSTR (l_cmts_1, ',') + 1));
l_cmts_add: = TRIM (SUBSTR (l_cmts_1, 1, INSTR (l_cmts_1, ',') - 1));
END LOOP;
END IF;
END LOOP;
COMMIT;
EXCEPTION
WHILE OTHERS THEN
Dbms_output.put_line ('ERROR' |) SQLERRM);
END;
/
output
control files -
DOWNLOAD THE DATA
INFILE 'cmts_data.csv '.
ADD
IN THE STG_CMTS_DATA TABLE
When (cmts_token! = ") AND (cmts_token! = 'NULL') AND (cmts_token! = 'null')
and (cmts_ip! = ") AND (cmts_ip! = 'NULL') AND (cmts_ip! = 'null')
FIELDS TERMINATED BY ' |' SURROUNDED OF POSSIBLY "" "
TRAILING NULLCOLS
('RTRIM (LTRIM (:cmts_token))' cmts_token,
cmts_ip ' RTRIM (LTRIM(:cmts_ip)) ")". "
for dhcp.
DOWNLOAD THE DATA
INFILE 'dhcp_data.csv '.
ADD
IN THE STG_DHCP_DATA TABLE
When (dhcp_token! = ") AND (dhcp_token! = 'NULL') AND (dhcp_token! = 'null')
and (dhcp_ip! = ") AND (dhcp_ip! = 'NULL') AND (dhcp_ip! = 'null')
FIELDS TERMINATED BY ' |' SURROUNDED OF POSSIBLY "" "
TRAILING NULLCOLS
('RTRIM (LTRIM (:dhcp_token))' dhcp_token,
dhcp_ip ' RTRIM (LTRIM(:dhcp_ip)) ")". "
for link -.
DOWNLOAD THE DATA
INFILE 'link_data.csv '.
ADD
IN THE STG_LINK_DATA TABLE
When (dhcp_token! = ") AND (dhcp_token! = 'NULL') AND (dhcp_token! = 'null')
and (cmts_to_add! = ") AND (cmts_to_add! = 'NULL') AND (cmts_to_add! = 'null')
FIELDS TERMINATED BY ' |' SURROUNDED OF POSSIBLY "" "
TRAILING NULLCOLS
('RTRIM (LTRIM (:dhcp_token))' dhcp_token,
cmts_to_add TANK (4000) RTRIM (LTRIM(:cmts_to_add)) ")" ""
SHELL SCRIPT-
If [!-d / log]
then
Mkdir log
FI
If [!-d / finished]
then
mkdir makes
FI
If [!-d / bad]
then
bad mkdir
FI
nohup time sqlldr username/password@SID CONTROL = load_cmts_data.ctl LOG = log/ldr_cmts_data.log = log/ldr_cmts_data.bad DISCARD log/ldr_cmts_data.reject ERRORS = BAD = 100000 LIVE = TRUE PARALLEL = TRUE &
nohup time username/password@SID @load_cmts.sql
nohup time sqlldr username/password@SID CONTROL = load_dhcp_data.ctl LOG = log/ldr_dhcp_data.log = log/ldr_dhcp_data.bad DISCARD log/ldr_dhcp_data.reject ERRORS = BAD = 100000 LIVE = TRUE PARALLEL = TRUE &
time nohup sqlplus username/password@SID @load_dhcp.sql
nohup time sqlldr username/password@SID CONTROL = load_link_data.ctl LOG = log/ldr_link_data.log = log/ldr_link_data.bad DISCARD log/ldr_link_data.reject ERRORS = BAD = 100000 LIVE = TRUE PARALLEL = TRUE &
time nohup sqlplus username/password@SID @load_link.sql
MV *.log. / log
If the problem I encounter is here for loading data in the link table that I check if DHCP is present in the subntwk table, then continue to another mistake of the newspaper. If CMTS then left create link to another error in the newspaper.
Now that we can here multiple CMTS are associated with unique DHCP.
So here in the table links to create the link, but for the last iteration of the loop, where I get separated by commas separate CMTS table stg_link_data it gives me log as not found CMTS.
for example
DHCP-1-1-1. WNLB-CMTS-01-1,WNLB-CMTS-02-2
Here, I guess to link the dhcp-1-1-1 with balancing-CMTS-01-1 and wnlb-CMTS-02-2
Theses all the data present in the subntwk table, but still it gives me journal wnlb-CMTS-02-2 could not be FOUND, but we have already loaded into the subntwk table.
same thing is happening with all the CMTS table stg_link_data who are in the last (I think here you got what I'm trying to explain).
But when I run the SQL scripts in the SQL Developer separately then it inserts all valid links in the table of links.
Here, she should create 9 lines in the table of links, whereas now he creates only 5 rows.
I use COMMIT in my script also but it only does not help me.
Run these scripts in your machine let me know if you also get the same behavior I get.
and please give me a solution I tried many thing from yesterday, but it's always the same.
It is the table of link log
link is already present: dhcp-1-1-1_TO_wnlb-cmts-01-1 NOT FOUND CMTS for device to create the link: wnlb-CMTS-02-2
link is already present: dhcp-1-1-2_TO_wnlb-cmts-03-3 link is already present: dhcp-1-1-2_TO_wnlb-cmts-04-4 NOT FOUND CMTS for device to create the link: wnlb-CMTS-05-5
NOT FOUND CMTS for device to create the link: wnlb-CMTS-01-1
NOT FOUND CMTS for device to create the link: wnlb-CMTS-05-8 NOT FOUND CMTS for device to create the link: wnlb-CMTS-05-6 NOT FOUND CMTS for device to create the link: wnlb-CMTS-05-0 NOT FOUND CMTS for device to create the link: wnlb-CMTS-03-3
link is already present: dhcp-1-1-5_TO_wnlb-cmts-02-2 link is already present: dhcp-1-1-5_TO_wnlb-cmts-04-4 NOT FOUND CMTS for device to create the link: wnlb-CMTS-05-7
Device not found: wnlb-dhcp-1-13 IF NEED MORE INFORMATION PLEASE LET ME KNOW
Thank you
I felt later in the night that during the loading in the staging table using UNIX machine he created the new line for each line. That is why the last CMTS is not found, for this I use the UNIX 2 BACK conversion and it starts to work perfectly.
It was the dos2unix error!
Thank you all for your interest and I may learn new things, as I have almost 10 months of experience in (PLSQL, SQL)
-
Is it OK to buy the student of CC version and I use it mainly for the University ... But I sometimes design (Logos, posters... etc) for my friends and other people and I charge for it? ... is legal? because I really care about the small details.
You are allowed to use the student/teacher version for commercial purposes.
-
two nodes OEM, how best to use these two nodes?
I checked the OEM documents, seems 2 nodes single point of failure. He recommended 4 knots of CARS and best practices.
However, my company provided only two nodes without RAC configuraiton. What is the best I can get out?
Create a primary then waiting for failover OEM?
Thank you in advance.Hello
Consult the following document, which gives «High availability Solutions»
http://docs.Oracle.com/CD/E11857_01/EM.111/e16790/ha_strategy.htm#BGBICCFF
Will give the options high availability configurations.
Best regards
Vincent -
Use creation to read alternating channels and data
I have a csv file that I am trying to create a use. The help file says that if I specify a line in the form of data, then all subsequent lines must also be given.
The first line of my file is a header parameter names of test. I would like these are the names of channel for the actual data (parameter values) that follow on the next line.
Then I have a blank line, then a line with my main data channel names. The following lines are then the main actual data.
I'm sure I need a VBScript to do this, but am a little to get something that works based on examples that I found on the shelf.
I want to bring in the header data in the data portal so that I can put some of them together with graphs in my reports.
I have attached a sample data file. Also, I would generally ignore some of the columns of data (in this case, columns 3 to 10)
Thanks for your suggestions!
Hi Greg_Gran-
I have attached a personalized use which will be structured according to your posted example files and will ignore the third to the tenth data channels.
To use the use, simply unzip the cover record attached to your hard drive. Double-click the *.uri file that is included to register for use with your computer. Once you get the registration successful dialog box, you will be able to load your data files. Because CSV is a format of generic file with many variations, you may need to push the priority of this particular use for the *. "" "Extension CSV through DIAdem NAVIGATOR" settings "My DataFinder ' configure ' menu File Extensions so that this use is always used instead of the other *. DataPlugins CSV.
I didn't know if you wanted to ignore the third to the tenth of all columns of data or from time to time, so I built a small hook in the use that will allow you to adjust the 'package' of ignored channels (e.g.: 3-10, 1-5, 21-30). To change the range of the use know when loading:
- Select the NAVIGATOR tiara.
- "" "Select Settings ' Options ' Extensions ' DataPlugins.
- Right-click the use of Greg_Gran_CSV, and then select Edit the Script.
- In line 5 of the use, the variable "Ignore" is defined as a one-dimensional two values (3 and 10) table. These are the upper and lower values defining the range of the data channels to ignore. To load all the data, change the value (or both) - 1.
- Save the use.
As I had only a single file to test with, I can't guarantee that there will be problems with your other files - let me know if you encounter any problems or if you have any other questions.
-
all the nodes property objects and objects grouped
Hello
Now position an on my GUI objects in the center of the screen using nodes property. However, I don't want to have to have a node property for each decoration, image and control. Is it possible that I can group all the objects and then use a property node to position them? I tried to use the property node all objects, but none of the clues seem to apply to my group of objects.
Help please!
Thank you very much.
John
p.s. I downloaded my vi test. The graph, the decoration and the exit button have been grouped. control over check.vi to set the object to be moved.
Tabbed pages are a great way to group objects GUI.
Rather than use a decoration,
- use a tab control
- Delete everything except the first tab
- Hide tab
- The value of the proprties of the tab control and control on this page is move, hide, display as well as the tab control.
I hope this helps,
Ben
-
What is main groups of work and home-group?
Dear moderator,
What is main groups of work and home-group?
Best@regards
Faruksao
From Bangladesh
Homegroup, you need windows 7 or a later version to use.
Group work is part of a network, if your PC is part of a
-
When I use my media keys (IntelliType), Winamp and other nearby
I have the MS Wireless Desktop 3000 and 8.2 IntelliType. When Winamp is not my main target and I use the multimedia keys, MiniLyrics or Winamp will close. It was not always so; When I first installed this keyboard, it worked perfectly. Also, I tried to reinstall IntelliType and it does not solve the problem. Any ideas? Thanks in advance.
Hello
You did changes to the computer before the show?
Note: It seems to be a problem with the macros on the keyboard software. Make sure that there are no macros / parameters assigned to any key under the software.
Method 1:
To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
Try to perform the clean boot and check if it helps, here is the link:
http://support.Microsoft.com/kb/929135Note: When you're done to diagnose, follow step 7 in the article to start on normal startup.
Method 2: Restore the system to a date when it was working fine. Follow the link below:
System Restore: frequently asked questions:
http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions
-
What is the main difference between IMPORT AND EXPORT
What is the main difference between IMPORT AND EXPORT using Toad in the production site
EXP FILE = E:\A\ABC USERNAME/PASSWORD@DATABASENAME. DMP (LOCATION. JOURNAL OF DMP) = E:\A\ABC. (LOCATION. NEWSPAPER OWNER) = USERNAME GRANTS = STATISTICS N = COMPLIANT NONE = Y
FILE USERNAME/PASSWORD@DATABASENAME EXP = LOCATION. JOURNAL OF DMP = LOCATION. JOURNAL FROMUSER = USERNAME = USERNAME GRANTS TOUSER = STATISTICS = NONE N IGNORE = Y
Maybe you are looking for
-
Sierra upgrade - NO speaker sound
After upgrading my MacBook Pro [13'3 inches, mid-2012] of El Capitan for Sierra my internal speakers stoped working and helmets as well listening. The only way I can use the sound is through Apple TV... Reinstalled Sierra, ran disk utility, checked h
-
It's been a long time I used Firefox (got a Macbook and for some reason any just used Safari for a long time), so please forgive me if I am just missing something in the settings of Firefox. Anywho, I have Firefox put in place to remember not my stor
-
I want to update to iOS for iPhone form a computer that isn't mine. I do nit want to backup purchases in their itunes library. What should I do?
-
Hi all Is it possible for someone to break the code in an exe of labVIEW? I wonder just about the integrity of my code when I send to the customer! Thank you
-
I was sorting out my folder and deleting items when there is a notice saying something of if this file is deleted something would happen and I pressed ok assuming that it just meant I have remove this folder. However, when I clicked ok more than half