DataGuard setup for the selected schemas

Similar Questions

• How to make a good UI for the selection of the channels with DAQmx

  A lot of my Labview programming accompanied verisons them previous LabVIEW (pre Labview 7), and there are a ton of new features I am digesting (currently using Labview 8.2).

  My question is (in general), how people schedule their user interface for the selection of channels and others when using hardware DAQmx?  What I have in mind is a system compacDAQ with a number of modules.  The user would be able to choose which channels to watch.  With the help of MAX as part of this process seems counter intuative and somewhat static (yes I know you can change out there, but it feels more like something you would use for something that doesn't really change much).  I wish that all the UI within the VI.

  Programmers use the task of creating screw for this or something else?

  Thanks in advance.

  ChuckNRC,

  I tend to avoid using MAX and create all my channels/tasks using the DAQmx functions.  There are also having some DAQmx features that allow you to save/remove channels, tasks and scales to MAX.

• PCL Code for the selection of the status bar

  We have a Unix-based program that relies on EZ for the selection of the printer spooler. Printing was allowed until we replaced the old printer with a HP 3005dn. We must make letterhead in tray 3. EZ print spooler requires to print PCL codes. I ran the code numbers range to print from the 3rd drawer.

  My problem is when it receives the print job, you have to hit the OK button twice so he can shoot from the 3rd drawer.

  By changing the PCL code, I can get him out tray 2 automatically, or stops for tray 3.

  I have modifed the installation of manual feeding system and or use requested tray do not help both.

  Here's the line of code in order

  PCLx_lowreceipt_ac_begin_ ^ [& l0o66f4H ^ [& s1C ^ [(s4099t0p12H_]]

  4 H is supposed to designate the selection of the status bar. I spent several hours from 1: 00 until 8: 00 successfully and to have the work automatically pull from tray 3.

  any ideas?

  Solution

  You need to access from the UI and not the control panel

  -IP in the laserprinter

  -Tab settings select

  -Set the camera (left side)

  -Develop "Configure Device" in the center of the page

  -Develop "Impression".

  -Develop 'PCL '.

  -at the bottom, "Mapping of media sources"... assign the Standard classic.

  Worked!

• BlackBerry smartphones can not change 'Sounds for the selected profile' or create new ones

  I can't change any of the other sounds in my profiles or create new profiles.  I can switch between them and change notifications as expected from fort to vibrate to silence.  When I select 'Sounds for the selected profile' I get a transition of the screen as he opens the new screen, but then disappears.  I tried to create a new one, but the new profile button and menu option do nothing.  I upgraded to 6.0.0.246 in hope, he could solve the problem, but it didn't.  Can I change the ringtone and sounds for contacts only.  When I arrived at the torch, I could change and I even created a new.  Any ideas?

  delete nimbuzz, berrybuzz or any other instant messaging applications, and then restart the device

• My CS5 Illustrator (just updated) guard smoking when I either try to re - create a link, scroll through fonts, use the pipette for the selection of the color of police/or save to a new folder outside of the previously used. Even when I choose to close, he

  My CS5 Illustrator (just updated) guard smoking when I either try to re - create a link, scroll through fonts, use the pipette for the selection of the color of police/or save to a new folder outside of the previously used. Even when I choose to close, he said that it "unexpected." Really irritating - ideas?

  Your options are:

  -try to make it work (could take a few hours and may does not always work)

  -get the CS6 (has problems as well, but works a little better)

  -get CC

  -install a virtual machine with an older system (10.6 or 10.8)

  -Check if your Mac is not as new as you think and you can still run Yosemite (also has problems, but perhaps not as much)

• Why omit Photoshop elements 14 for the selection of Color Variations in the color "adjust" knocked down? That was helpful. What do you suggest me to use in a place?

  Why omit Photoshop elements 14 for the selection of Color Variations in the color "adjust" knocked down? That was helpful. What do you suggest me to use in a place?

  If you have a copy of PES 11 or earlier version, you could install it and use it for this.

  You can apply here:

  Feature request/Bug Report Form

• Is it possible to use a multicolored image (red tomato with green stem) as an indicator of reversal for the selection button to a DVD in encore

  Have 6 buttons and want to use a red tomato with a green stem to indicate that the button is set up over and selected?

  Short answer - no two long answers - Yes and Yes.

  Highlights can only be single color (two-bit indexed color) and your image is not.

  However, you can have up to 3 main points using different colors for each of them. Then change your image so that you overlay 3 different colors (layers in photoshop, = 1, = 2 and = 3). I would try probably the background layer as the red ball; then the white reflection, then the green on top. When the highlight is turned on, all the 3 colors show.

  The other method is to use autoactivate (a button) to access a different menu which changes the image in the background for this button.  You create multiple menus, with an ordinary State for all buttons in all the menus, with the exception of the different "Star" for the "selected" button MouseOver not autoactivate, so this does not work on a computer as you want.

• The MGP Apply mode / 'write' for the selected users?

  Is there a work around to implement the mode of MGP Apply / 'write' for the selected users? The reason is that we have registered who transact only the request online. In this case, they don't need to synchronize. Manually change the ALL_CLIENT$ CAN. OUTQUEUE_DIRTY to ' has only a temporary effect and would normally return to 'Y' after a user made another transaction online. Please advice.

  If you have users who just order updates, then why do need to be put in place in the mobile app? they still appear in synchronization history? If this isn't the case, then I suggest that you just drop them from the mobile server because they have no need for the application lite oracle, just access to the server application.

  Regarding updates to direct data to the tables of mobile repository then (although not recommended), normally they don't cause problems, but would bypass in some cases associated with the transformation.

  If you change the param_value in c$ all_subscription_parameters, then the new setting of subsetting to take effect. However, if you do the same action via mobile manager, it also triggers a reset (if used) customer zero, assignment of new values in sequence and re-evaluation of the list of items of publication associated with c$ all_client_items - these products of two change would be lost if you just update the data in the table

• How to get the metadata for the selected tables of a schema

  Hello
  
  I need the metadata for the tables selected for an activity. The list of the table continues to change now. I get the list of tables just before the activity.
  
  What I need is to know how to put the list of tables in the sub query dynamicallly
  
  +++++++++++
  exec dbms_metadata.set_transform_param (DBMS_METADATA. False SESSION_TRANSFORM, 'SEGMENT_ATTRIBUTES',);
  exec dbms_metadata.set_transform_param (DBMS_METADATA. False SESSION_TRANSFORM, 'STORAGE',);
  exec dbms_metadata.set_transform_param (DBMS_METADATA. SESSION_TRANSFORM, 'TABLESPACE', TRUE);
  
  Select DBMS_METADATA. GET_DDL ('TABLE', '&') from user_tables where rownum < 2;
  +++++++++++
  
  What I need is something of the form where table_name in (< table1 >, < table2 >, < table3 >,..., etc.) in the query above, so that i access all the metadata
  He doesn't hit me how I can write this query to single line. Can someone help here?
  
  Regds,
  Malika

  Hello

  try using the name of the column to user_tables and owner of the table in the "DBMS_METADATA. GET_DDL' and the reel to reel for some files and run this file in turn exit.

  coil
  Select ' select DBMS_METADATA. GET_DDL ("' TABLE," ' | table_name |', "' ) double;' from user_tables
  where ;
  spool off;

  @some_file - trying to spool output too.

  -Pavan Kumar N

• shows am improve ready system me ready start Hello, after installing "Setup for the windows modules" my pc one slowed down at the start. That do I do? Thank you.

  Hello, after installing "Setup for windows modules" my pc one slowed down at the start. That do I do? Thank you.

  Hello Turkish styleozdemir.

  The forum in which you've posted is for English only. Please select your language by clicking on the globe on the page down to the left to post your question in the language of your choice. If you can't find the desired below language, support for additional international sites options are by following the link below:
  http://support.Microsoft.com/common/international.aspx
  Thank you!

• FORMS N-400: UNCHANGABLE AUTO FILL FOR THE SELECTION OF COUNTRIES

  When I'm filled the part of the address of the form n-400, I select the State as "NY". In doing so, the selection of country auto "USA." However, this selection of countries is reserved for foreign countries. I tried to remove and change preferences, but there is still no solution. Help, please! Thank you!

  In addition, unable to enter s/o to a large number of vacant houses (especially in address, names etc.) which I feel I should do to avoid any delay in application.

  Chrome uses its own internal PDF plugin, which is less than the normal to the Adobe software in many ways, especially when it comes to form fields.

  The fact that you can do it in Chrome does not mean you devriez do.

  I don't know what is the reason, but I guess the data you provide is transferred to a database or later (STP). Having an empty field of 'Country' is not recommended. It is preferable it be automatically populated with a value ('USA') and then treat accordingly.

• P2V failed to get the hardware information for the selected computer

  Hi all!

  I am (for the first time) doing a P2V conversion.

  
  The target computer is a remote SBS2008.

  I have installed the local vCenter Converter Client 5.1 on my laptop

  I installed the agent (found in the installation on my laptop directory) on the remote server.

  I opened the ports that I found on the website of vmware in the firewall of remote sites (8089, 139, 445, 9090, 137 and 138)

  When I enter the connection details in the converter I receive the SSL certificate pop-up (so there is an established connection), but when I click on 'ignore' it just presents me: "Unable to obtain material information to the computer selected."

  I've been looking around for some howto or extra info but he had a hard time finding ;-)

  Thank you very much for the comments!

  When you launch VMware Converter, do my right clicking on the program icon and selecting "Run As Administrator".

• Help and suggestions for the color scheme for the design of flavor package multiple

  I need help to choose colors for a range of products food multiple flavor.

  My goal in this post is about how to create or acquire the palette that I need in order to design, model, collateral marketing etc.

  
  

  This project requires a color scheme which has sufficient contrast and variation to represent up to 24 flavors of food packed by type or range of products. Each flavor of product or the combination of flavor (the name of the element, as the cocoa almond cherry or apricot vanilla etc.) in the line will be represented by a unique color. The product packaging is white on solid color. The environment will be brilliant laser printing on labels.

  
  

  The problem is that many flavors will use similar colors. Chocolate items will have different shades of Brown and Maple flavors or nut will also use brown tones. The same Orange, Apricot and mango will use similar shades of orange etc. I know that the problem could be solved with two or more colors, but I don't have this option for this project. All packaging is white on single color. He has not used the accent colors.

  
  

  I need to generate the palette before you design the package to create models for printing and photography for print marketing and marketing etc. Active documents on the internet.

  
  

  Does anyone have a good strategy for this or know all the resources available?

  
  

  I use :

  Dell Precision T1700 (64-bit)

  Windows 7 Professional (Service Pack 1)

  Two screens (not calibrated for Pantone or printer)
  

  Printer: Konica Minolta bizhub c224e

  Book + Pantone Color Bridge Coated and lying

  Adobe CC, HAVE, PS, ID, etc.

  
  

  I print on labels of brilliance for models and you want to use images for the web.

  
  

  I'd also be interested to know how to calibrate these devices.

  
  

  Thank you!

  Out of the computer for a day and come out at your local grocery store and see what the competition is doing.  In addition, the product itself may be your best resource for a color.  Who and its taste.  Food is a product that will generate a color once you have tasted.  I know, maybe it's not practical.  You could start with 6 primary and develop the 4 colors of catΘgories of void.  You could also watch the manufacturers of ink different color in addition to Pantone for some unique options.  Laser printers are struggling with spot colors, but they can be calibrated.  Look at the manufacturer's recommendations for hardware devices like xRite colorspectrometers.  Nice project.  I hope this helps.

• Eligibility for the benefits scheme based on participation in another plan

  We must control an eligibility of joint plan based on participation and registration to the scheme for the employees in the same program. Employee can if enter two plans at the same time, but we do need an audit that would not allow employees to enroll in an RRSP without registering under the plan. We must maintain these plans as each have their own insurance amounts because it is optional life insurance. If I use eligibility criteria then he is obliging used to be enrolled in the plan outlined before even the life event has been processed. Need help how to have the validation during registration? Any help is greatly appreciated.
  Thank you very much

  Hello

  See reference Guide Oracle FastFormula (FF) for Standard (OSB) and advanced benefits (OAB) (Doc ID 218059.1)
  Type of formula: election Post

  This could help you.

  Kind regards
  Aneesh N

• Default value for the select list of type of form elements

  Hello
  
  I do not work with Apex that mutch, so this may be a simple question... but I still need help.
  I have a form, in this form, I have a question P19_ONTVANGER_ID, this is based on a LOV.
  This LOV is on a table that has a field of username with the value of APP_USER.
  The table looks like:
  ONTVANGER_ID this is the PK and is going to be the return value from the LOV.
  NAME is the display value for the LOV.
  USERID is the column APP_USER.
  
  What users would like to get is that if they create a new record, the default value for the P19_ONTVANGER_ID field is their own ONTVANGER_ID.
  But they must also be able to select another user.
  
  hope there is someone out there that can and will help me.
  
  Kind regards
  
  Rob
  
  APEX 4.0.2 Oracle 10

  Rob-v-M-Gn-Nl wrote:
  Until now, I had, but I need to select the value of the id of the table and the list of selection item appears the corresponding value.

  How can I do this?

  You can select the Type of default value as the body of the PL/SQL function

  and to add something like that

  declare
  v_return number;
  begin
    select your_id
      into v_return
    from your_table
    where some_column = :APP_USER;
   return v_return;
  exception when no_data_found then
   return null;
  end;
  

  http://www.asktheoracle.NET/PLSQL-function.html