DataGuard with gap of archive, applied backup YVERT founded, still does not
Hello
Our DR falling into the pit of archive. The archives were not present both disk and tape on primary and Standby. Has been also added two primary data files.
Referred
- We have restored the missing datafiles to the rest - how datafile ASM copy of primary data on the DSO with RMAN standby database (Doc ID 605234.1()
- We roll forward watch - steps for roll forward a database standby using RMAN incremental backup when the data file is added to the primary (Doc ID 1531031.1()
But always standby watch gap archive:---
-User is valid
Completed: change the recovery of database managed standby database disconnect from the session
FAL [client]: you cannot request the gap sequence
GAP - thread 1 sequence 2000-2900
DBID - branch-
FAL [client]: all defined FAL servers have been tried.
-------------------------------------------------------------
Check that the initialization of CONTROL_FILE_RECORD_KEEP_TIME
parameter is set to a value large enough
enough to keep adequate record switch information to solve
ARCHIVELOG gaps.
-------------------------------------------------------------
I did not mention the dbid and branch here.
Help, please.
Thank you
Hello;
You can try to roll the night before together forward. My friend CKPT has a page about it here:
http://www.Oracle-CKPT.com/RMAN-incremental-backups-to-roll-forward-a-physical-standby-database-2/
Best regards
mseberg
Tags: Database
Similar Questions
-
I need help on my computer, it's a window Vista Home Basic. Sometimes my computer rebooted or encountered problem blue screen. Is it related to my anti virus program or any hardware or software failure? I try to solve it, Defrag disk and system restore, but it still does not work.
Do you have an antivirus installed? Otherwise download, update and scan with this
http://www.Microsoft.com/security_essentials/
Follow these steps
http://support.Microsoft.com/kb/929135
and this
- Open an elevated command prompt. To do this, click Start, click principally made programs,Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.
Type the following command and press ENTER:
sfc/scannow
-
With the help of a Media Center PC HP Pavilion.
solution uninstall the lexmark program
Download this file: http://support.lexmark.com/index?page=content&id=DR7353&actp=search&viewlocale=en_US&userlocale=EN_US+&segment=DOWNLOAD&productCode=LEXMARK_X5470&searchid=1257910229479
Right-click on it (after downloading) and click on properties, then click on compatibility, then choose run this program in compatibility mode for windows vista service pack 2 and click ok
now run the program and follow the directions.
print the test page and "walla". -
Backup could not be completed. -still does not not after the 9.2 update.
After update of iOS 9.1, many of us had problems with the backup on the iCloud. 9.2 IOS was supposed to solve this problem, but it still does not work! Does anyone know how to report these problems directly to Apple?
Contact Apple iCloud support.
-
I downloaded Multi Access Tool from Mcafee with Firefox Mozilla, how do I reinstall if it does not work properly?
My sincere apologies, my Mcafee came via the Optimum/Cablevision, not Mozilla. I now managed to solve my problem and appreciate the 2 above responses. Thank you.
-
my iPhone 6s has problems with the GPS when I use some applications, it does not work well and give especially the bad road. Can someone help me?
My iphone 6 has started having the same problem. Its literally the GPS. Saying that it does not find me at all. Ive seen say location for more than an hour in the suburbs of chicago. It started to happen to me after I downloaded the latest update for the iphone. I hope they react and let you know what is happening because I'm dying to know as well.
-
recommended security cumulative ie8 and compatible display updates fail. can install it with the installer of standalone download but then ie8 does not connect. If I remiove update ie8 works very well
Hi mikedav,
Thank you for using the Microsoft Windows Vista Forums.
Method 1:
Microsoft has released a new "Fix it" solution that should automatically solve your problems with Windows Update. Just click on the link below and follow the instructions.
How to reset the Windows Update components?
http://support.Microsoft.com/kb/971058
If you are not able to connect to the internet after you install the update, you need to optimize Internet explorer by following the instructions below.
Method 1:
Follow the instructions in the link below which will help you solve the problem.
Tips for solving problems with Internet Explorer
http://windowshelp.Microsoft.com/Windows/en-us/help/8038f9ac-9bf9-4809-8d75-fc42818d8af71033.mspx
Method 2:
Follow the instructions in the link below to optimize Internet Explorer.
How to optimize Internet Explorer
http://support.Microsoft.com/kb/936213
Please post back and let us know if it helped to solve your problem.
Kind regards
KarthiK TP
-
I just bought a new router d-link wireless n for my house. Connect my Win 7 Desktop, laptop xp to Acer and multitude of other devices, but my laptop Vista with Atheros AR5007 adapter does not connect to internet. I tried to disable IPv6, defining the name of the network, flushing dns cache, etc.. Nothing will work. (It would not connect to an another 802.11n router in January either.)
I get local only on both connections Wi-wired and wireless, no matter what I do.I'll send this to my office that I can not connect my laptop to the internet and he does not see the other machines on the network.Any suggestions from anyone? I spent hours trying to solve the problems, now completely stumped.OK, here was my fix:
I tried a lot of things, but they do not work. I downloaded a 'new' driver of HP - it turns out it was the original with the problem. I found another one that was about a more recent months, still does not work. I finally managed to get the atheros.cz driver for my card files. But they do not have an installation file. I had to search for each old file in its directory, copy it to another place (to be sure, just in case) and then copy and replace the old file with the new file in the original folder. Fortunately, there were only 6 files, but it took about an hour and a half. This isn't a lot of time compared to the 18 or if I was just trying to figure out the problem. Now, my laptop connects to the internet without problem.I had this problem with a router "n" beginning of the year in a hostel. The guy in the Inn told me that he had seen before once. It's obviously a common problem with these cards (as seen on the "solutions" online) and Vista. I'm always hating on Vista after this problem. -
IM problems with my wireless connection, it says my DNS server does not respond, what is this, can help to somone, thanks
Hello
Thanks for posting the question in the Microsoft Community!
You can't use the wireless connection and the message that the DNS server is not responding.
The problem may occur if the computer is unable to connect to the DNS server.
To check, I suggest you follow the steps:
Method 1: Re-register the DNS
a. Click Start. Type cmd in the search box and press ENTER.
b. at the command prompt, type the following command and press ENTER:
ipconfig/flushdns (there is a space between ipconfig and /)It will display the message properly emptied the cache of DNS resolution.
c. at the command prompt, type the following command and press ENTER:
ipconfig/registerdns (there is a space between ipconfig and /)d. at the command prompt, type the following command and press ENTER:
ipconfig/all (there is a space between ipconfig and /)
The command ipconfig/all command displays for all your network adapters, TCP/IP in Windows settings.If your IP address of your Local network connection is 0.0.0.0 or 169.x.x.x (where x is a number any), then your computer does not receive an IP address from router.
If this is the case, try this:i. enough at the command prompt ipconfig and press ENTER
II. ipconfig / renew in command prompt and press ENTER
The test again by typing ipconfig/all to see what is the address? (If you are on a router, it should start by or 192.168.0.x or 192.168.1.x 10.x.x.x)
Method 2:
a. click Start and then click Control Panel.
b. go to the networking and sharing Center and then click on change adapter settings.
c. right-click on connection to the Local network and select Properties.
d. Select Internet Protocol Version 6, and then click Properties.
e. choose the DNS server to obtain an address automatically , then press Ok.
f. Select obtain IP address automatically.
g. Repeat steps for Internet Protocol version 4 as well.
I hope this helps. If the problem persists, or if you have problems of Windows in the future, let us know and we would be happy to help you.
-
With PFS disabled or active, it still does not connect while using Windows 7.
With PFS disabled or enabled, it still does not connect. Is this a common problem with Windows 7 for the IP Sec gateway to gateway VPN connections and/or does anyone know how to get this working?
Hello
For assistance on this issue, you can post your question in Windows 7 IT Pro Technet Forums.
Network Windows 7
http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads
-
I have a new HP Envy with Windows 8 desktop computer that still does not run properly. I have rebooted, restored (im doing this), ran chkdsk, sfc/scannow, malware, virus, uninstall/install etc and my machine wil always do not run for a long time without going through some sort of problem after an hour or two. Can anyone suggest what to do about this? I read a lot of information online on all the windows 8 and fixes bugs, etc, but anything Microsoft/Windows, which ensures its customers, a hotfix or compesating their customers with software that still works. This isn't a hardware problem, and I can't keep day and bad shooting and trying to fix the day things in?
Sincerely,A client who is a loss for words.Here are some problems in no particular order.1.) apps to not install it, and/or Windows saying they are when they are in fact not. The fix to install / uninstall, or get on the site of windows directly in general does not, and or does not at all.The change permissions 2.) does not work on files that you should be able to access in changing oxnership, permissions, etc.3.) Google chrome won't let me access my account of microsoft (or fact rarely) trying to access assistance. But internet Explorer doesn't?Randomly will increase from Internet 4.) a previous connection wired to wireless to a reboot.5.) my 8 'key' windows was only shown to me after that I have let Windows scan my machine online? Why? I paid for this... I restarted it and it says: service not available (it worked the third attempt which was 1-3 minutes after the initial analysis). Windows only showed my product ID not the key. I know that my victory. 8 was OEM when preinstalled I bought it new, but why didn't we files on it that had nothing to do with activation, appearing on dates for three weeks, or so before I bought it. What is the 'activation of the factory'?6 :) Windows Essentials does not hang for a long time, and the troubleshooterprogram of update simply does not work (I had to go to the website to try tp operate, the bluetooth functionality is not good that there is an error.7.) windows scan and repair gets stuck at 27% (Im not the only one with this problem).8.), avery MS Office 2013 Disappears so often and not easy to reload "we have encountered a problem.The computer manufacturer is responsible to see that it works properly with Windows 8. It says that it is a new computer I contact HP and make these problems their. If you don't get satisfactory results I turn and look elsewhere for a computer. Hope this helps and if you need another post to help and we will be happy to help you.
The above opinion is mine and mine nothing and does not necessarily reflect that of Microsoft, it's employees, or any other Member of this forum.
"When we try to take anything by itself, we find it hitched to everything else in the universe." -John Muir
-
Hi, I have installed sqldeveloper - 4.0.3.16.84 - x 64 with JDK and tried to run SQLDeveloper.exe its does not work. A flash comes and goes. It worked fine until two days ago. Don't know what happened all of a sudden its not working. Need help.
I use Windows 7 Pro.
I have read other threads and tried to launch SQLDeveloper.exe from the CMD prompt, nothing is shown a flash comes and goes.
Tried to change of SetJavaHome sqldeveloper.conf to the path JDK that it didn't work.
Please guide me.
Thank you
Maybe there is a problem with SQL Developer, being able to write to the network share of desktop directory. Add the following to your sqldeveloper.conf file to force the settings of the user to store locally also:
AddVMOption - Dide.user.dir = some_local_dir_to_own_system4.0.3.16.84
I hope this helps...
-
I can't open a picture jpg with my PS. I have already created another profile to my Mac, reinstalled Ps and one I updated the latest version of the operating system. Still does not open JPG. I want to know what to do next.
Then, you install Camera raw version 9.4 from this link: Camera Raw of Adobe Photoshop CC and CS6 Installer
-
I'm on the last update of lightroom 5 and captive capture still does not work with el Capitan. are there plans to upgrade or do I have to buy the new lightroom 6?
Hi Yanni,
Tethered shooting works fine with Lightroom 6.4 on El Capitan.
You can then go ahead and buy Lightroom and perform the tethered shooting.
Kind regards
Tanuj
-
I was not able to open my my Adobe Illustrator application after update. He says there are a few problems with the preference but after following the instructions, Illustrator still does not work and it keeps giving the samei question. Help, please.
I think you are talking after upgrade to CC 2015 you're not able to launch I. Also, I believe you speak for read only matter of preference.
After following the instructions please do not launch Illustrator and check your file preference if the permissions have been set correctly. A good way would be to get inside the preferences folder and then try to create a file manually. If it succeeds, please write to [email protected]
A few external links to help you set permissions:
MAC
OS X Yosemite: set permissions for items on your Mac
WIN
Set, view, change, or remove permissions on files and folders
Kind regards
Ashutosh
Maybe you are looking for
-
How can I change the search engines if /searchreset does not work?
I just upgraded to 23 FF, and it or some other setting changed my default Yahoo search engine. I want to go back to Google, which I think is the default value. Another thread of support was driven to https://addons.mozilla.org/firefox/addon/searchres
-
HOW TO MAKE INTELLIGENT BUFFER ACCEPTS AN ARRY
Salvation; I'm doing the smart buffer (http://zone.ni.com/devzone/cda/epd/p/id/2499) example accept a table. I wonder if there is anyone out there who knows how to do this. I would appreciate a response. Thank you very much.
-
Can someone help me with this error. Network error occurred while attempting to read C:\Users\Bob\AppData\Local\Microsoft\Windows\TemoraryInternetFile\Content.IE5\YFKRN3UL\owasmime[1].msi It is causing me not to be able send emails at home through th
-
Can I set the Spider Solitaire game so that once I beat a game, it is not upward?
Once I beat a game, I would not play again. Also, I saw that a computer was 32 000 different games Spider? How can I find out who I'm playing?
-
Hello We intend to implement SAN Dell PS EQL 6100 in our development infrastructure. This iSCSI SAN will be connected to our VMware (without vCenter) infrastructure using Cisco 2960 switches. But the list of supported switches does not include the Ci