DataProvidor out of reach?

Similar Questions

• Apple Watch gives a warning sound or vibration when it is out of reach with your iPhone?

  Apple Watch gives it its warning or vibrates when it is out of reach with your iPhone? If so, how to set up? If this is not the case, why they have this important function, so we do not lose our phones?

  Hello

  Apple Watch does not currently offer them alerts audible or haptic if it is taken out of the reach of the paired iPhone Bluetooth. When devices are disconnected via Bluetooth, if the watch is also impossible to connect to a Wi - Fi network, known at that time, it will display the icon disconnected at the top of the face of the Watch:

  

  However, you can find this application useful third party:

  • Lookout - security, backup and missing device
    • "Tells you the distance between your iPhone and Apple Watch and warns you if they are about to lose the connection."
    • https://iTunes.Apple.com/us/app/lookout-security-backup-missing/id434893913?Mt=8

  If you want to suggest that Apple considers adding Bluetooth disconnection as a built-in alerts, you can do so here:

  https://www.Apple.com/feedback/watch.html

• Error of flow OR MAX and attribute camera out of reach

  I recently bought a camera Point Grey Grasshopper3, it seems to work fine at point software fly Cap Gris provides, but I get an error NI Max when I try to do a simple puncture (see below). This error appears every time I try to catch a time image the first after the opening OR MAX, even if the flow is set to maximum. Then I change the flow under control of the unit to any integer 125000000 max, and the camera works very well for MAX. It will capture images as much as I need. Then I save the camera output MAX, open MAX once again, it shows my saved settings, I'm going to capture images and I get the error again. If I change the range regardless of the number and it works again in the same session in MAX.

  I had a gray point Zebra2 work very well and he used in my program LabVIEW with IMAQdx to acquire images. When I try to use grasshopper3, LabVIEW returns error attribute camera out of reach of the VI camera configuration. I use to test the camera of the VI is the camera just to open, configure acquisition, start acquiring, get the picture, cancel the acquisition and nearby IMAQdx camera configuration. I did twice open MAX, change the flow, save the camera, close MAX without grasping an image and then was able to acquire images in LabVIEW in the first inning. I would run the VI once again and then it returns the error to attribute camera out of reach. I changed the packet size, resolution and the frame rate of the camera with a difference in errors.

  Since I am able to images of the stream from the camera to the gray point fly capture and Max after activating/deactivating the flow layout, it leads me to believe there is some sort of error MAX/LabVIEW that prevent me to capture the images.

  Any ideas? Has anyone else had this problem with MAX and LV?

  Looks like the point Grey cameras showed this error before the firmware on the basis. See this linkfor such a forum. I would monitor the camera (*.icd) file located in the data folder IMAQdx in public Documents to see if the actual value is be replaced after the configuration of the camera has been saved in MAX. There is a chance that the GigE. XML file which is transferred from the camera is overwrite these values in the unacceptable value. See this linkfor a KB about this error, which leads me to believe that this may be the problem.

• The Smartband is supposed to vibrate if out of reach of Bluetooth of the phone?

  I read somewhere that if the Smartband speech is out of reach of Bluetooth of the phone, it starts to vibrate. However, I left the phone somewhere and walked very far until I lost the connection, but the talk of Smartband never vibrates. I was wondering if there is a feature or I need to do something to turn it on. Thank you!

  This was the case for SWR10, he did. And SW3 can do it if you take a google reader app. But never noticed on my SWR30.

• applied range__i resolution the resolution of my screen to the highest frequency and my screen is black screen and out of reach, I restarted my pc, but when it came to the login page my affixed screen again the same how can I get it back

  I chose my resolution of windows xp to the highest frequency screen and my screen become black and displayed out of reach, I restarted my pc, but when it came to the login page my screen shows again her even, how can I get it back?

  Hi hcosdihv,

  Start the PC in safe mode then go back to the display settings and set the resolution to a lower level.

  You start in Mode safe by constantly pressing the F8 key as your PC starts. A menu will appear and you must select the Safe Mode option.

  Once you have changed the screen resolution, you can restart your PC normally.

  Make sure that you "only" to select an output of the range option.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Desktop Experience: Web:http://www.winuser.co.uk;  Web: http://xphelpandsupport.mvps.org;  Web: http://vistasupport.mvps.org;  Web: http://www.silversurfer-guide.com

• Dual monitor dilemma: dvi - d, out of reach

  I have been running this Setup dual monitor since late December and have had no problems so far. But before I did my primary secondary monitor and tried to run 'Civilization beyond Earth' (which I've cranked up for the highest possible settings) on it and was greeted with "dvi - d out of reach of the 67.5 khz/60 Hz" on a black screen. So I restarted my computer, which only complicated the issue because my LG (which again, read "dvi - d out of reach of the 67.5 khz/60 Hz") was my main monitor, and so I couldn't connect. It's been fixed only when I unplugged my other monitors the dvi cable, and my login screen appears.  I can run the other monitor as my primary, but only if the LG is unplugged, and as soon as I plug my LG it becomes main monitor and displays new "dvi - d out of reach of the 67.5 khz/60 Hz", which means that I can't do my other monitor primary so that the two are connected.

  My questions are: You have an idea, what is the problem? Or how to fix it? I can't stop the LG to the monitor main spot? Why is it read "dvi - d out of reach of the 67.5 khz/60 Hz" when the two are connected?

  Graphics card: AMD Radeon R9 270 X

  Monitior problem: 20 "backlit LED LG 1600 x 900 display

  Hey Joe,

  Thanks for posting your concern on the Microsoft community.

  With the description you've provided, looks like there could be some problems with the resolution of the video card.

  I suggest you increase the refresh rate of the video card and check if that helps. You can follow the steps described in the following article:

  http://Windows.Microsoft.com/en-us/Windows/correct-monitor-flicker-refresh-rate#1TC=Windows-7

  Note: If you notice flicker on a CRT monitor, you may need to change your screen resolution before changing the refresh rate. The resolution is high, the higher your refresh rate should be, but not every screen resolution is compatible with every refresh rate.

  For more information, see

  Change your screen resolution:

  http://Windows.Microsoft.com/en-us/Windows7/change-your-screen-resolution

  Changes to the refresh rate affect all users who log on the computer.

  Hope this information helps. Let us know the State and do not hesitate to write back to us for assistance.

• movedleft page screen out of reach. How to get back right in sight?

  page of the screen moved left out of reach. How to get back right in sight?

  If you can see and take the title bar, start here. If this is way off the screen, see this.
   
  How can I move a window off the screen in Windows 7?
  http://ask-Leo.com/how_do_i_move_an_offscreen_window_in_windows_7.html

   

• BlackBerry Smartphones GPS works out of reach?

  If I am out of reach of the cell phone, is the GPS still works on the curve?

  Thank you

  Well, I'm back from my camping trip and the answer is that the GPS component does NOT work if you are out of range of the network.  I was at the top of a mountain of ft 12 k and he said "clear need from the sky."  What a pity.  I would like to think that I had a lifeline GPS even when I was on the range of cells.  (I use Sprint).

• How can I stop technotronic tv ranging from vga to out of reach after windows has loaded?

  How can I stop technotronic tv ranging from vga to out of reach after windows has loaded?

  VGA Out of range usually means that the display resolution is not properly set for television "limited."  Demarrer start in safe mode, and then set the resolution to a lower setting.

• Tool: how to choose an image inside the image area that is out of reach

  Tool: how to choose an image inside the image area that is out of reach?

  See the photo below reference.

  How to move the image inside a box that lies beyond the visible area? (The bottom box)

  When you click the image, you can't get the contour or more unless the image area is expanded to include the hidden area.

  Am I missing something? Thanks for the help.

  Vannon

  

  You can move the object back in the frame by clicking on the button "Content Center" to the right (this is located in your toolbar at the top).

  

  Or you can use the arrows on your keyboard to move it as well.

• Crawl song fade out before reaching the top of the screen

  Dear all,

  I would like the title of my working capital to continue rolling but I want it to fade out until it reaches the top of the screen.  It seems that I can do it quite easily in Final Cut Pro, but maybe I'm wrong.  In other words, the full title keeps rolling until the end, but vanishes each lines up before reaching the top of the screen and roll out of sight.  Any suggestions?  Work in Premiere Pro CC 2014 on a Mac.  Thank you.

  Add a linear wipe with a border of feathers for the title of working capital.

• ListFindItem with StartingPosition out of reach: BUG

  Hello

  The index returned by ListFindItem is BAD when:

  • StartingPosition = 0 (this is a wrong value: StartingPosition must be > = 1).
  • The search value is equal to the LAST item inserted in the list:

  The following code example shows the bug in the TEST_D:

  int main (int argc, char *argv[])
  {
      ssize_t     startingPosition = 0;
      size_t      index = 0;
      int         val = 0;
  
      ListType myList = NULL;
  
      myList = ListCreate (sizeof(int));
  
      val = 1;
      ListInsertItem (myList, &val, END_OF_LIST);
  
      val = 2;
      ListInsertItem (myList, &val, END_OF_LIST);
  
      val = 3;
      ListInsertItem (myList, &val, END_OF_LIST);
  
      // TEST_A: OK
      startingPosition = 1;
      val = 1;
      index = ListFindItem (myList, &val, startingPosition, IntCompare);
      // index = 1 --> OK
  
      // TEST_B: OK
      startingPosition = 10; // WRONG value: startingPosition is over the number of items.
      val = 1;
      index = ListFindItem (myList, &val, startingPosition, IntCompare);
      // index = 0 --> OK because startingPosition is out of range (>3)
  
      // TEST_C: OK
      startingPosition = 0; // WRONG value: startingPosition must be >= 1
      val = 1;
      index = ListFindItem (myList, &val, startingPosition, IntCompare);
      // index = 0 --> OK because startingPosition is out of range (<1)  
  
      // TEST_D: NOT OK
      startingPosition = 0; // WRONG value: startingPosition must be >= 1
      val = 3;   // value of the LAST ITEM inserted in the List
      index = ListFindItem (myList, &val, startingPosition, IntCompare);
      // index = 3 --> NOT OK: the behaviour is different compare to TEST_C.
      // In this case, ListFindItem must return 0 (NOT 3) because startingPosition is out of range (<1).
      // If you look for another item (not the last: val=1 ou val=2) ListFinfItem returns 0 --> OK
      return 0;
  }
  

  Hello jm73,

  The behavior you're seeing is planned. Please note that you can use the following two macros to specify the starting position: END_OF_LIST and FRONT_OF_LIST . Macros are defined as follows in toolbox.h :

  #define FRONT_OF_LIST -1 /* Handy Constants that substitute for item positions */
#define END_OF_LIST 0 /* END_OF_LIST means one past current length of list when
inserting. Otherwise it refers the last item in the list. */

  Specifying 0, you say the ListFindItem function to start looking at the end of the list, that is why, he finds the last item.

• attention out of reach on the screen

  have Attention "Out of Range" on my screen, what - what, how I do (fix it?

  Hello

  1. are you able to work in normal mode?

  2. did you of recent changes on the computer?

  3. using a new monitor or old?

  The message coming from your monitor and means that the monitor is unable to handle the output of the video card.

  You can consult the following links of wire and see if it helps.

  Under XP, my monitor said work outside the scope of the analysis and to change the setting of the pc

  Refresh rate changed on the monitor and now my monitor has no picture

  Hope this information is useful.

• out of reach, solutions...

  I have a hp Pavilion desktop pc which has win 8. I got this about a week ago. It worked fine

  Until this week to what to turn on my computer. TNE screen gave me the "Grinchy.

  message "out of range". I looked on the Net. but nothing matches my problem.

  My problem is that I can not connect, not even close! Turn on the PC. It starts, but so fast, I can't hit the

  Good Ol ' F8 key and I know other assignments, this is a common problem. I read on

  Win8 Safe Mode access ', but at the time of the eccentric I have the F8 menu, I could not go

  a more far. I know more or less there is no direct way to safe mode on Win8, but I

  Just can't get in my computer! I'm stuck and there seems to be no solution. If anyone can

  offer a solution, that would be great. Otherwise, I have a few expensive paperweight!

  Computer technology would be able to 'get' inside my pc and my resolution? Help, please!

  Computer: HP Pavilion 500 - 023w PC

  3rd generation Intel Core i3 - 3240 processor (2B)

  64-bit 8 GB DDR 3 win 8

  : HP WD2071D 20-inch backlit monitor

  Thank you and Merry Christmas!

  ladyrissa2U2

  Spoiler (Highlight to read)

   

   

  Hi ladyrissa,

  I'm referring you to a HP atricle which may help to solve your problem of troubleshooting.

  Please read carefully the atricle as the symptom "out of range" is covered.

  Flat Panel Monitor

  You have created a drive to win 8 recovery? I suspect that Win 8 starts correctly. So it will not start at the Advanced Recovery option. A recovery USB disk would help you in the Advanced menu Win 8 recovery of additional troubleshooting. Safe mode, reset and refresh options would be available to fix your graphics.

  Here is a link on how to create a disc to win 8 recovery after solve you the current problem.

  Sounds like the monitor is unable to detect the current Win 8 resolution settings.

  Jaco

  I'm not an employee of ch *.

  "" "" Please give a "Bravo" If the notice is relevant or "Accept as Solution" If your problem has been resolved.

  +++++++++++++++++++++++++++++++++++++++++++++++++++++
  H8 1380 t CTO, Intel i7 3820
  16 GB OF DDR3 MEMORY
  Pegatron Motherboard-IPIWB-PB (Pittsburgh), Radeon HD 7570 1 GB. Win 7 Home Premium set to upgrade to Windows Pro 8.1.

  Want Phoenix 810-150se, Intel i7 4820 k
  12 GB OF DDR3 MEMORY
  Pittsburgh2 motherboard, NVIDIA GTX 645 - 2 GB GDDR5. Win Pro 8.1.

  HP 560z CTO AMD Phenom II X 6 1090 t.
  16 GB OF DDR3 MEMORY.
  Radeon HD 6570
  Win 7 Home Premium set to upgrade to Windows 7 Pro.

  HP ENVY 17 t-j000 CTO Quad Edition laptop. I7 4702mq
  12 GB OF DDR3 MEMORY
  NVIDIA graphics
  Win 8 Pro

• Caused by: java.sql.SQLException: setMaxRows() out of reach. 2147483647 > 50000000

  I use Oracle jDeveloper 12 c. When I try to export the table to Excel, I'm the exception. It was working fine before.

  Here is the stack trace.

  
  

  oracle.jbo.SQLStmtException: JBO-29114 ADFContext is not setup to process messages for this exception. Use the exception stack trace and error code to investigate the root cause of this exception. Root cause error code is JBO-27122. Error message parameters are {0=select * from wd.portfolio_master}
  at oracle.jbo.server.QueryCollection.buildResultSet(QueryCollection.java:1432)
  at oracle.jbo.server.QueryCollection.executeQuery(QueryCollection.java:976)
  at oracle.jbo.server.ViewObjectImpl.executeQueryForCollection(ViewObjectImpl.java:7849)
  at oracle.jbo.server.ViewRowSetImpl.execute(ViewRowSetImpl.java:1398)
  at oracle.jbo.server.ViewRowSetImpl.executeQueryForMasters(ViewRowSetImpl.java:1665)
  at oracle.jbo.server.ViewRowSetImpl.executeQueryForMode(ViewRowSetImpl.java:1549)
  at oracle.jbo.server.ViewRowSetImpl.executeQuery(ViewRowSetImpl.java:1529)
  at oracle.jbo.server.ViewObjectImpl.getFinderRS(ViewObjectImpl.java:18591)
  at oracle.jbo.server.ViewObjectImpl.getAllRowsIterator(ViewObjectImpl.java:18025)
  at oracle.jbo.uicli.binding.JUCtrlHierNodeBinding.getAllChildrenNodesIterator(JUCtrlHierNodeBinding.java:937)
  at oracle.jbo.uicli.binding.JUCtrlHierNodeBinding$IterateOnlyArrayList.iterator(JUCtrlHierNodeBinding.java:815)
  at oracle.adfinternal.view.faces.model.binding.OptimizedRowDataManager.setRowIndex(OptimizedRowDataManager.java:58)
  at oracle.adfinternal.view.faces.model.binding.FacesCtrlHierBinding$FacesModel.setRowIndex(FacesCtrlHierBinding.java:921)
  at org.apache.myfaces.trinidad.component.UIXCollection.setRowIndex(UIXCollection.java:572)
  at org.apache.myfaces.trinidad.component.UIXTable.setRowIndex(UIXTable.java:782)
  at oracle.adfinternal.view.faces.export.CollectionExportDirector._renderAllDataRows(CollectionExportDirector.java:512)
  at oracle.adfinternal.view.faces.export.CollectionExportDirector._renderDataRows(CollectionExportDirector.java:447)
  at oracle.adfinternal.view.faces.export.CollectionExportDirector._renderContent(CollectionExportDirector.java:127)
  at oracle.adfinternal.view.faces.export.CollectionExportDirector.export(CollectionExportDirector.java:109)
  at oracle.adfinternal.view.faces.export.ExportCollectionActionListener.processAction(ExportCollectionActionListener.java:199)
  at javax.faces.event.ActionEvent.processListener(ActionEvent.java:88)
  at org.apache.myfaces.trinidad.component.UIXComponentBase.broadcast(UIXComponentBase.java:1113)
  at org.apache.myfaces.trinidad.component.UIXCommand.broadcast(UIXCommand.java:179)
  at oracle.adf.view.rich.component.rich.nav.RichCommandMenuItem.broadcast(RichCommandMenuItem.java:105)
  at org.apache.myfaces.trinidad.component.UIXComponent.broadcastInContext(UIXComponent.java:364)
  at oracle.adf.view.rich.event.ProxyEvent.broadcastWrappedEvent(ProxyEvent.java:72)
  at oracle.adf.view.rich.component.fragment.UIXRegion.broadcast(UIXRegion.java:124)
  at org.apache.myfaces.trinidad.component.UIXComponent.broadcastInContext(UIXComponent.java:364)
  at oracle.adf.view.rich.event.ProxyEvent.broadcastWrappedEvent(ProxyEvent.java:72)
  at oracle.adf.view.rich.component.fragment.UIXRegion.broadcast(UIXRegion.java:124)
  at javax.faces.component.UIViewRoot.broadcastEvents(UIViewRoot.java:794)
  at javax.faces.component.UIViewRoot.processApplication(UIViewRoot.java:1259)
  at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._invokeApplication(LifecycleImpl.java:1074)
  at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:402)
  at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:225)
  at javax.faces.webapp.FacesServlet.service(FacesServlet.java:593)
  at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:280)
  at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:254)
  at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:136)
  at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:346)
  at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:25)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:79)
  at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:192)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:79)
  at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:105)
  at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:502)
  at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
  at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:502)
  at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:327)
  at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:229)
  at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:79)
  at org.apache.shiro.web.servlet.ProxiedFilterChain.doFilter(ProxiedFilterChain.java:61)
  at org.apache.shiro.web.servlet.AdviceFilter.executeChain(AdviceFilter.java:108)
  at org.apache.shiro.web.servlet.AdviceFilter.doFilterInternal(AdviceFilter.java:137)
  at org.apache.shiro.web.servlet.OncePerRequestFilter.doFilter(OncePerRequestFilter.java:125)
  at org.apache.shiro.web.servlet.ProxiedFilterChain.doFilter(ProxiedFilterChain.java:66)
  at org.apache.shiro.web.servlet.AbstractShiroFilter.executeChain(AbstractShiroFilter.java:449)
  at org.apache.shiro.web.servlet.AbstractShiroFilter$1.call(AbstractShiroFilter.java:365)
  at org.apache.shiro.subject.support.SubjectCallable.doCall(SubjectCallable.java:90)
  at org.apache.shiro.subject.support.SubjectCallable.call(SubjectCallable.java:83)
  at org.apache.shiro.subject.support.DelegatingSubject.execute(DelegatingSubject.java:383)
  at org.apache.shiro.web.servlet.AbstractShiroFilter.doFilterInternal(AbstractShiroFilter.java:362)
  at org.apache.shiro.web.servlet.OncePerRequestFilter.doFilter(OncePerRequestFilter.java:125)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:79)
  at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:137)
  at java.security.AccessController.doPrivileged(Native Method)
  at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
  at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:460)
  at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:120)
  at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:217)
  at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:81)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:79)
  at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:220)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:79)
  at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:79)
  at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3436)
  at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3402)
  at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
  at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
  at weblogic.servlet.provider.WlsSubjectHandle.run(WlsSubjectHandle.java:57)
  at weblogic.servlet.internal.WebAppServletContext.doSecuredExecute(WebAppServletContext.java:2285)
  at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2201)
  at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179)
  at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1572)
  at weblogic.servlet.provider.ContainerSupportProviderImpl$WlsRequestExecutor.run(ContainerSupportProviderImpl.java:255)
  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:311)
  at weblogic.work.ExecuteThread.run(ExecuteThread.java:263)
**Caused By: java.sql.SQLException: setMaxRows() out of range. 2147483647 > 50000000.**
  at com.mysql.jdbc.SQLError.createSQLException(SQLError.java:1058)
  at com.mysql.jdbc.SQLError.createSQLException(SQLError.java:972)
  at com.mysql.jdbc.SQLError.createSQLException(SQLError.java:958)
  at com.mysql.jdbc.SQLError.createSQLException(SQLError.java:903)
  at com.mysql.jdbc.StatementImpl.setMaxRows(StatementImpl.java:2758)
  at weblogic.jdbc.wrapper.PreparedStatement_com_mysql_jdbc_JDBC4PreparedStatement.setMaxRows(Unknown Source)
  at oracle.jbo.server.QueryCollection.buildResultSet(QueryCollection.java:1346)
  at oracle.jbo.server.QueryCollection.executeQuery(QueryCollection.java:976)
  at oracle.jbo.server.ViewObjectImpl.executeQueryForCollection(ViewObjectImpl.java:7849)
  at oracle.jbo.server.ViewRowSetImpl.execute(ViewRowSetImpl.java:1398)
  at oracle.jbo.server.ViewRowSetImpl.executeQueryForMasters(ViewRowSetImpl.java:1665)
  at oracle.jbo.server.ViewRowSetImpl.executeQueryForMode(ViewRowSetImpl.java:1549)
  at oracle.jbo.server.ViewRowSetImpl.executeQuery(ViewRowSetImpl.java:1529)
  at oracle.jbo.server.ViewObjectImpl.getFinderRS(ViewObjectImpl.java:18591)
  at oracle.jbo.server.ViewObjectImpl.getAllRowsIterator(ViewObjectImpl.java:18025)
  at oracle.jbo.uicli.binding.JUCtrlHierNodeBinding.getAllChildrenNodesIterator(JUCtrlHierNodeBinding.java:937)
  at oracle.jbo.uicli.binding.JUCtrlHierNodeBinding$IterateOnlyArrayList.iterator(JUCtrlHierNodeBinding.java:815)
  at oracle.adfinternal.view.faces.model.binding.OptimizedRowDataManager.setRowIndex(OptimizedRowDataManager.java:58)
  at oracle.adfinternal.view.faces.model.binding.FacesCtrlHierBinding$FacesModel.setRowIndex(FacesCtrlHierBinding.java:921)
  at org.apache.myfaces.trinidad.component.UIXCollection.setRowIndex(UIXCollection.java:572)
  at org.apache.myfaces.trinidad.component.UIXTable.setRowIndex(UIXTable.java:782)
  at oracle.adfinternal.view.faces.export.CollectionExportDirector._renderAllDataRows(CollectionExportDirector.java:512)
  at oracle.adfinternal.view.faces.export.CollectionExportDirector._renderDataRows(CollectionExportDirector.java:447)
  at oracle.adfinternal.view.faces.export.CollectionExportDirector._renderContent(CollectionExportDirector.java:127)
  at oracle.adfinternal.view.faces.export.CollectionExportDirector.export(CollectionExportDirector.java:109)
  at oracle.adfinternal.view.faces.export.ExportCollectionActionListener.processAction(ExportCollectionActionListener.java:199)
  at javax.faces.event.ActionEvent.processListener(ActionEvent.java:88)
  at org.apache.myfaces.trinidad.component.UIXComponentBase.broadcast(UIXComponentBase.java:1113)
  at org.apache.myfaces.trinidad.component.UIXCommand.broadcast(UIXCommand.java:179)
  at oracle.adf.view.rich.component.rich.nav.RichCommandMenuItem.broadcast(RichCommandMenuItem.java:105)
  at org.apache.myfaces.trinidad.component.UIXComponent.broadcastInContext(UIXComponent.java:364)
  at oracle.adf.view.rich.event.ProxyEvent.broadcastWrappedEvent(ProxyEvent.java:72)
  at oracle.adf.view.rich.component.fragment.UIXRegion.broadcast(UIXRegion.java:124)
  at org.apache.myfaces.trinidad.component.UIXComponent.broadcastInContext(UIXComponent.java:364)
  at oracle.adf.view.rich.event.ProxyEvent.broadcastWrappedEvent(ProxyEvent.java:72)
  at oracle.adf.view.rich.component.fragment.UIXRegion.broadcast(UIXRegion.java:124)
  at javax.faces.component.UIViewRoot.broadcastEvents(UIViewRoot.java:794)
  at javax.faces.component.UIViewRoot.processApplication(UIViewRoot.java:1259)
  at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._invokeApplication(LifecycleImpl.java:1074)
  at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:402)
  at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:225)
  at javax.faces.webapp.FacesServlet.service(FacesServlet.java:593)
  at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:280)
  at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:254)
  at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:136)
  at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:346)
  at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:25)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:79)
  at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:192)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:79)
  at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:105)
  at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:502)
  at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
  at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:502)
  at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:327)
  at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:229)
  at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:79)
  at org.apache.shiro.web.servlet.ProxiedFilterChain.doFilter(ProxiedFilterChain.java:61)
  at org.apache.shiro.web.servlet.AdviceFilter.executeChain(AdviceFilter.java:108)
  at org.apache.shiro.web.servlet.AdviceFilter.doFilterInternal(AdviceFilter.java:137)
  at org.apache.shiro.web.servlet.OncePerRequestFilter.doFilter(OncePerRequestFilter.java:125)
  at org.apache.shiro.web.servlet.ProxiedFilterChain.doFilter(ProxiedFilterChain.java:66)
  at org.apache.shiro.web.servlet.AbstractShiroFilter.executeChain(AbstractShiroFilter.java:449)
  at org.apache.shiro.web.servlet.AbstractShiroFilter$1.call(AbstractShiroFilter.java:365)
  at org.apache.shiro.subject.support.SubjectCallable.doCall(SubjectCallable.java:90)
  at org.apache.shiro.subject.support.SubjectCallable.call(SubjectCallable.java:83)
  at org.apache.shiro.subject.support.DelegatingSubject.execute(DelegatingSubject.java:383)
  at org.apache.shiro.web.servlet.AbstractShiroFilter.doFilterInternal(AbstractShiroFilter.java:362)
  at org.apache.shiro.web.servlet.OncePerRequestFilter.doFilter(OncePerRequestFilter.java:125)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:79)
  at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:137)
  at java.security.AccessController.doPrivileged(Native Method)
  at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
  at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:460)
  at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:120)
  at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:217)
  at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:81)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:79)
  at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:220)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:79)
  at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:79)
  at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3436)
  at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3402)
  at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
  at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
  at weblogic.servlet.provider.WlsSubjectHandle.run(WlsSubjectHandle.java:57)
  at weblogic.servlet.internal.WebAppServletContext.doSecuredExecute(WebAppServletContext.java:2285)
  at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2201)
  at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179)
  at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1572)
  at weblogic.servlet.provider.ContainerSupportProviderImpl$WlsRequestExecutor.run(ContainerSupportProviderImpl.java:255)
  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:311)
  at weblogic.work.ExecuteThread.run(ExecuteThread.java:263)

  Hello.. I found the Solution. In the ViewPageDef.xml file, there is a RangeSize which was set to 25 by default.

  i.e.

  RangeSize = "25" DataControl = "PortfoliosAppModuleDataControl."

  ID = "PortfolioStakeHoldersVO1Iterator" / >

  I changed it to

  RangeSize = "200" DataControl = "PortfoliosAppModuleDataControl."

  ID = "PortfolioStakeHoldersVO1Iterator" / >

  Its working fine.

  Thank you very much for your support.